Electrical and Computer Engineering Commons^™

Clarifying The Use Of Formative Measurement In The Is Discipline: The Case Of Computer Self-Efficacy, Andrew M. Hardin, Jerry Cha-Jan Chang, Mark A. Fuller

Management, Entrepreneurship and Technology Faculty Research

The article offers insights on the use of formative measurement in the information system (IS) discipline. It focuses on the comment which warns researchers on the pitfalls of misapplying formative measures in information system domain as well as on the issues related to computer self-efficacy (CSE) and formative measurement. It then asserts that formative indicator weights are sued in determining the conceptual meaning of constructs and notes that the conceptual definition of CSE will likely differ as they are used in different research models and contexts.

Preliminary Study On Optimization Of Data Distribution In Resource Sharing Systems, Grzegorz Chmaj, Krzysztof Walkowiak

Electrical & Computer Engineering Faculty Research

Grid structures are increasingly considered as very convergent with peer-to-peer networks. This paper presents a model of network acting both as grid and peer-to-peer network, used for data computation and distribution. Presented PPLC algorithm is a complete solution for both grid and peer-to-peer points of view. Problem formulation is presented, as well as solution heuristic algorithm and research results.

Computational Studies Of H2, O2, And Co Adsorption On Pt And Pt-Ru Catalyst Clusters For Hydrogen Fuel Cell Applications, Huy Mai, T.J. Dhilip Kumar, P. Tarakeshwar, Naduvalath Balakrishnan

Undergraduate Research Opportunities Program (UROP)

Previous computational studies of hydrogen fuel cell catalysis primarily focus on single adsorbate and therefore do not reflect the realistic situation. Here we investigated the effect of multiple hydrogen, oxygen, and carbon monoxide adsorption on bimetallic nanoclusters as allowed by computational resources. The criteria of which we studied were adsorption energies, electron densities, electrostatic charges, and HOMO-LUMO energy gaps with respect to each structure. We found that Pt-Ru clusters have better performance than pure Pt clusters early in the adsorption course, and pure Pt clusters are more consistent than Pt-Ru clusters in a sequence of adsorbate introduction.

A Finite Queue Model Analysis Of Pmrc-Based Wireless Sensor Networks, Qiaoqin Li, Mei Yang, Hongyan Wang, Yingtao Jiang, Jiazhi Zeng

Electrical & Computer Engineering Faculty Research

In our previous work, a highly scalable and fault- tolerant network architecture, the Progressive Multi-hop Rotational Clustered (PMRC) structure, is proposed for constructing large-scale wireless sensor networks. Further, the overlapped scheme is proposed to solve the bottleneck problem in PMRC-based sensor networks. As buffer space is often scarce in sensor nodes, in this paper, we focus on studying the queuing performance of cluster heads in PMRC-based sensor networks. We develop a finite queuing model to analyze the queuing performance of cluster heads for both non-overlapped and overlapped PMRC-based sensor network. The average queue length and average queue delay of cluster …

Significance Of Logic Synthesis In Fpga-Based Design Of Image And Signal Processing Systems, Mariusz Rawski, Henry Selvaraj, Bogdan J. Falkowski, Tadeusz Luba

Electrical & Computer Engineering Faculty Research

This chapter, taking FIR filters as an example, presents the discussion on efficiency of different implementation methodologies of DSP algorithms targeting modern FPGA architectures. Nowadays, programmable technology provides the possibility to implement digital systems with the use of specialized embedded DSP blocks. However, this technology gives the designer the possibility to increase efficiency of designed systems by exploitation of parallelisms of implemented algorithms. Moreover, it is possible to apply special techniques, such as distributed arithmetic (DA). Since in this approach, general-purpose multipliers are replaced by combinational LUT blocks, it is possible to construct digital filters of very high performance. Additionally, …

College Of Engineering Senior Design Competition Spring 2008, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

Nuclear Energy, Steve Kraft

Native American Forum on Nuclear Issues

Abstract:

-Why Nuclear Energy?

-The lesson of the last 20 years in U.S. electricity policy:

– Diversified fuel and technology portfolio is essential

– All fuels and technologies (nuclear, coal, natural gas, renewables, efficiency) have a legitimate role

-The challenge for the future:

– Preserving/restoring diversified portfolio

– Ensuring resource adequacy, particularly in competitive markets

-Expanded use of nuclear energy is part of the answer

– Integrated used fuel management supports nuclear competitiveness

An Ultrahigh Vacuum Complementary Metal Oxide Silicon Compatible Nonlithographic System To Fabricate Nanoparticle-Based Devices, Arghya Banerjee, Biswajit Das

Electrical & Computer Engineering Faculty Research

Nanoparticles of metals and semiconductors are promising for the implementation of a variety of photonic and electronic devices with superior performances and new functionalities. However, their successful implementation has been limited due to the lack of appropriate fabrication processes that are suitable for volume manufacturing. The current techniques for the fabrication of nanoparticles either are solution based, thus requiring complex surface passivation, or have severe constraints over the choice of particle size and material. We have developed an ultrahigh vacuum system for the implementation of a complex nanosystem that is flexible and compatible with the silicon integrated circuit process, thus …

Decoupling And Disturbance Rejection Control For Target Circulation, Jian Ma, Joon S. Lee, Woosoon Yim

Reactor Campaign (TRP)

The Target Complex loop TC-1 was originally conceived as part of an accelerator-driven system (ADS) pilot plant that was designed and developed by the Institute of Physics and Power Engineering (IPPE) and Experimental and Development Organization (EDO) “Gidropress” in Obninsk, Russia, under the International Science and Technology Center Project #559 in 1998. It was to be used as the target in a 1 MWth ADS experiment run off of the LANSCE proton accelerator at Los Alamos National Laboratory (LANL). When the U.S. transmutation program changed priorities from accelerator-driven systems towards nuclear fission reactors, the TC-1 loop was brought to UNLV …

College Of Engineering Senior Design Competition Fall 2007, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

College Of Engineering Senior Design Competition Spring 2007, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

Nesting System With Quantization And Knowledge Base Applied, Leszek Koszalka, Grzegorz Chmaj

Electrical & Computer Engineering Faculty Research

Nesting algorithms deal with placing two dimensional shapes on the given canvas. In this paper a binary way of solving the nesting problem is proposed. Geometric shapes are quantized into binary form, which is used to operate on them. After finishing nesting they are converted back into original geometrical form. Investigations showed, that there is a big influence of quantization accuracy for the nesting effect. However, greater accuracy results with longer time of computation. The proposed knowledge base system is able to strongly reduce the computational time.

Thermal Transient Flow Rate Sensor For High Temperature Liquid Metal Cooled Nuclear Reactor, Yingtao Jiang, Jian Ma, Rohit Reddy Saddi

Mechanical Engineering Faculty Research

In nuclear power plants and accelerator driven system (ADS) for nuclear waste treatment, it is important to monitor the coolant flow rate in the reactor core and pipe-line. In such a strong irradiation, high pressure and temperature environment, no accurate local flow measurement technique is readily available. Electromagnetic (EM) flow meter is popular in low temperature application as it is a non-intrusive technology. However, additional voltage will be produced due to temperature, flow, pressure, the chemical properties of the liquid metal and surface condition of the steel walls. In addition, the non-definite wetting behavior of liquid lead-bismuth to the electrically …

Decoupling And Disturbance Rejection Control For Target Circulation, Jian Ma, Joon S. Lee, Woosoon Yim

Reactor Campaign (TRP)

In 1998, the Institute of Physics and Power Engineering (IPPE) and Experimental and Development Organization “Gidropress” in Russia, began the design and construction of a prototype lead-bismuth eutectic (LBE) accelerator target, the Target Complex 1 (TC-1), under the International Science and Technology Center (ISTC) project #559 (“Pilot Flow Lead-Bismuth Target of 1 MW Power for Accelerator Driven Systems”) in support of the international efforts to develop accelerator-driven spallation systems for nuclear transmutation and other applications.

During the thermal and engineering test of the TC-1 in 2005 at UNLV, it was observed that the existing control algorithm led to a very …

College Of Engineering Senior Design Competition Fall 2006, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

A Fuzzy Logic Controller For Autonomous Wheeled Vehicles, Mohamed Trabia, Linda Z. Shi, Neil Eugene Hodge

Mechanical Engineering Faculty Research

Autonomous vehicles have potential applications in many fields, such as replacing humans in hazardous environments, conducting military missions, and performing routine tasks for industry. Driving ground vehicles is an area where human performance has proven to be reliable. Drivers typically respond quickly to sudden changes in their environment. While other control techniques may be used to control a vehicle, fuzzy logic has certain advantages in this area; one of them is its ability to incorporate human knowledge and experience, via language, into relationships among the given quantities. Fuzzy logic controllers for autonomous vehicles have been successfully applied to address various …

Output Feedback Adaptive Variable Structure Control Of A Smart Projectile Fin, Smitha Mani, Sahjendra N. Singh, Woosoon Yim

Mechanical Engineering Faculty Research

No abstract provided.

College Of Engineering Senior Design Competition Spring 2006, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

Clarifying The Role Of Self-Efficacy And Metacognition As Indicators Of Learning: Construct Development And Test, Trevor T. Moores, Jerry Cha-Jan Chang, Deborah K. Smith

Management, Entrepreneurship and Technology Faculty Research

We propose extending our understanding of self-efficacy by comparing self-efficacy with a related construct called metacognition. Metacognition involves the monitoring and control of one's thought processes and is often related, as is self-efficacy, to performance on a task. We develop an instrument that attempts to measure both self-efficacy and metacognition with respect to one's performance on a test covering declarative and procedural knowledge (knowing that, and knowing how) of DFDs and ERDs. With data collected from a sample of 124 students, we use partial least squares (PLS) to show that self-efficacy and metacognition are distinct yet related constructs. While self-efficacy …

Least Squares Support Vector Machine Based Classification Of Abnormalities In Brain Mr Images, S. Thamarai Selvi, D. Selvathi, R. Ramkumar, Henry Selvaraj

Electrical & Computer Engineering Faculty Research

The manual interpretation of MRI slices based on visual examination by radiologist/physician may lead to missing diagnosis when a large number of MRIs are analyzed. To avoid the human error, an automated intelligent classification system is proposed. This research paper proposes an intelligent classification technique to the problem of classifying four types of brain abnormalities viz. Metastases, Meningiomas, Gliomas, and Astrocytomas. The abnormalities are classified based on Two/Three/ Four class classification using statistical and textural features. In this work, classification techniques based on Least Squares Support Vector Machine (LS-SVM) using textural features computed from the MR images of patient are …

Efficient Scheduling For Sdmg Cioq Switches, Mei Yang, S. Q. Zheng

Electrical & Computer Engineering Faculty Research

Combined input and output queuing (CIOQ) switches are being considered as high-performance switch architectures due to their ability to achieve 100% throughput and perfectly emulate output queuing (OQ) switch performance with a small speedup factor S. To realize a speedup factor S, a conventional CIOQ switch requires the switching fabric and memories to operate S times faster than the line rate. In this paper, we propose to use a CIOQ switch with space-division multiplexing expansion and grouped input/output ports (SDMG CIOQ switch for short) to realize speedup while only requiring the switching fabric and memories to operate at the line …

College Of Engineering Senior Design Competition Fall 2005, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

Adaptive Control Of A Projectile Fin Using Piezoelectric Elastic Beam, Smitha Mani, Sahjendra N. Singh, Surya Kiran Parimi, Woosoon Yim, Mohamed B. Trabia

Mechanical Engineering Faculty Research

No abstract provided.

Variable Structure Control Of Unsteady Nonlinear Aeroelastic System, With Partial State Information, Sushma Gujjula, Sahjendra N. Singh

Electrical & Computer Engineering Faculty Research

This paper treats the question of control of a two-degree-of-freedom unsteady aeroelastic system with partial state information in the presence of uncertainties. The chosen model describes the plunge and pitch motion of a wing and a single trailing-edge control surface is utilized for the purpose of control. Based on the Lyapunov approach, a variable structure control law is derived. For the control law derivation, the system is treated as the interconnection of two subsystems in which the subsystem associated with the unsteady aerodynamics is input-to-state stable. The stability property of this subsystem is exploited to generate a dominating signal for …

Study Of Secondary Electron Emission From Niobium At Cryogenic Temperatures, Anoop George

UNLV Theses, Dissertations, Professional Papers, and Capstones

The objective of this project is to study the properties of secondary electron emission from niobium samples, cleaned at the Los Alamos National Laboratory, at cryogenic temperatures to enhance existing multipacting codes with data on the samples. The predominant cause of power loss in radio-frequency superconducting accelerators cavities is multipacting. This project studies the secondary electron distribution from niobium metal due to incident primary electrons. The experiments on the niobium sample are performed in an environment close to that present in a superconducting accelerator cavity.

The experiment is performed in a vacuum chamber capable of achieving ultra high vacuum levels …

Modeling, Fabrication, And Optimization Of Niobium Cavities Final Phase: Final Report, Robert A. Schill Jr., Mohamed Trabia, William Culbreth

Transmutation Sciences Materials (TRP)

This final report provides the activities and accomplishments of Modeling, Fabrication, and Optimization of Niobium Cavities – Final Phase. The fluid flow experiments for the etching of the superconducting cavity walls and baffle designs of phase II of the three phases has been completed leading to a MS thesis in December of 2003. Designing the experimental setup of secondary electron emission was well underway in early summer of 2003 when funding was made available for this portion of the study. By March 2004, many of the components of the experimental study reached UNLV with some assembly accomplished. The first secondary …

Secondary Electron Emission From Niobium At Cryogenic Temperatures, Anoop George, Robert A. Schill Jr., Richard Kant, Stan Goldfarb

Transmutation Sciences Materials (TRP)

• A Secondary Electron Emission test stand has been designed to study the initial conditions of secondary electrons emitted from niobium in cryogenic state.

• Secondary electron particle distributions have been studied for 0^o, 15^o, and 30^o beveled surfaces

• BCP and EP samples have been compared showing that the EP count is over twice as large as the BCP count

• Electron beam surface conditioning was examined. Conditioning appears to be sensitive to pulse duration and the number of impacts

• Good comparison have been shown between experiment and simulation

Instrumentation Of Ysz Oxygen Sensor Calibration In Liquid Lead-Bismuth Eutectic, X. Wu, Jian Ma, Yingtao Jiang, B. Fu, W. Hang, J. Zhang, N. Li

Mechanical Engineering Faculty Research

Liquid lead-bismuth eutectic (LBE), a good candidate for the coolant in the subcritical transmutation blanket, is known to be very corrosive to the stainless steel that transports it. Such a corrosion problem can be prevented by producing and maintaining a protective oxide layer on the exposed surface of the stainless steel. Proper formation of the oxide layer critically depends on the accurate measurement and control of the oxygen concentration in liquid LBE. An oxygen sensor calibration/measurement apparatus has been designed and built to deliberately calibrate an yttria stabilized zirconia (YSZ) oxygen sensor. A detailed description of this system with its …

Modeling, Fabrication, And Optimization Of Niobium Cavities: Phase Iii Fourth Quarterly Report, Robert A. Schill Jr., Mohamed Trabia, William Culbreth

Transmutation Sciences Materials (TRP)

Niobium cavities are important parts of the integrated NC/SC high-power linacs. Over the years, researchers in several countries have tested various cavity shapes. They concluded that elliptically shaped cells are the most appropriate shape for niobium superconducting cavities. The surface preparation can significantly affect the secondary electron emission yields. Such yields are used in design codes. Current codes use values obtained from niobium samples cleaned by a different means at temperatures other than the operating temperature. Secondary electron emission studies on LANL surface-cleaned niobium are conducted with preliminary data presented in this report at room temperature. Soon studies will be …

Modeling, Fabrication, And Optimization Of Niobium Cavities: Phase Iii, Third Quarterly Report, Robert A. Schill Jr., Mohamed Trabia, William Culbreth

Transmutation Sciences Materials (TRP)

This quarterly report provides an update to the last phase of the Modeling, Fabrication, and Optimization of Niobium Cavities in the no-cost extension period. Designing the experimental setup of secondary electron emission was well underway in early summer of 2003 when funding was made available for this portion the study. By March 2004, many of the components of the experimental study reached UNLV with some assembly accomplished. The first secondary electron emission (SEE) measurement was made from the surface of a Faraday cup in September 2004. In December of 2005, the software for the particle positioning detector was finally up …