Electrical and Computer Engineering Commons^™

Development Of A Versatile Switching Mode Inverter Laboratory Module, Zachariah Lee Mustar

Master's Theses

DC-AC converters, or inverters, are complex devices that play an essential role in photovoltaic, energy storage, and microgrid systems. Therefore, they constitute a class of power electronics that any power-focused electrical engineering student should be familiar with. This thesis presents the development and testing of a single device that power electronics students will use in a laboratory setting to experiment with each of the four different switching techniques employed in inverters: a simple square wave (SSWI), modified square wave (MSWI), bipolar PWM, and unipolar PWM. The module was built with a physically modifiable control stage and a power stage constituting …

Design And Development Of A Half-Bridge Llc Resonant Converter Laboratory Module, Alyssa Lam

Master's Theses

Resonant DC-DC converters have become a well-known solution in power supplies due to their ability to improve efficiency by utilizing soft-switching techniques. This further has caused a growing interest in industry to use these converters for high-switching-frequency, high-efficiency, and high-power applications such as EV charging stations, photovoltaic systems, battery chargers, etc. One particular resonant topology that has gained popularity in recent years is the LLC resonant converter. Due to the prevalent use of the LLC resonant converter, it is therefore crucial for students preparing for a career path in power electronics to become well-versed in the concept and implementation of …

Coherent Synchronization For Distributed Digital Phased Arrays, Zachary C. Numa

Master's Theses

Distributed digital phased arrays are rising technologies that help enable applications such as search and rescue operations, wireless communication, radar navigation, and military operations, among many others. Due to their improved angular resolution, digital phased arrays offer superior direction-finding capabilities compared to traditional analog phased array systems. However, this improvement comes at the cost of increased complexity—specifically, the need for precise synchronization of phase, time, and frequency across physically separated nodes. Without synchronization, the distributed phased array's gain and direction-of-arrival (DoA) estimations deteriorate significantly.

There are multiple aspects to implementing and synchronizing a non-stationary distributed digital phased array. This research …

Open Source Microgrid Integration, Zachary J. Kwast

Master's Theses

Microgrids are small-scale electrical systems that operate in tandem with a centralized grid to provide power to a smaller group of target devices. These microgrids are used for a wide range of different purposes, which invites the need for a generalized model that can be tweaked for a variety of uses. This document goes over the theory used to design an open source AC and DC microgrid meant for use by anyone. The microgrid is created using a Raspberry Pi that controls two different power converters so that a wide range of voltage and current characteristics can be achieved. These …

Analog Hardware Implementation Of A Linearly Constrained Quadratic Program Real-Time Solver, Claire E. Tylutki, Claire Tylutki

Master's Theses

This thesis presents the design, implementation, and analysis of a hardware system for solving Linearly Constrained Quadratic Programs (LCQPs) in real time. The architecture follows a generalized feedback structure composed of three key elements: gradient descent on the quadratic cost function, saturation-based nonlinearity to enforce inequality constraints, and an integral controller with an anti-windup mechanism to regulate dynamic behavior and determine steady-state error. This majority analog system converges with equilibria that satisfy the Karush-Kuhn-Tucker (KKT) optimality conditions. Using a representative LCQP, this work presents simulation of the circuit in PLECS and LT Spice to confirm the feasibility of the novel …

Single-Sideband Pulse Width Modulation For Parametric Acoustic Arrays, Douglas Liu

Master's Theses

Parametric acoustic arrays are directional loudspeakers that operate using ultrasonic carriers to project sound within a narrow beam. Input audio is first modulated onto an ultrasonic carrier and transmitted through air, where it self-demodulates into audible frequencies in the far field.

This thesis introduces a method for preprocessing audio into scaled quadrature signals using a passive analog polyphase filter. These signals are modulated using microcontroller-generated waveforms to create quadrature ultrasonic pulse-width modulation (PWM) signals. The modulated outputs are combined through a wired-OR summer, producing single-sideband ultrasonic content at the desired frequency of 40 kHz. This signal is amplified through high-efficiency …

Prepare Lora Physical Layer For Testing In Low Earth Orbit On A Cubesat, Sammy Brunton

Electrical Engineering

This project is a collaboration with OWL Integrations, a company that specializes in adaptable, low-cost communication systems. OWL has developed a board specifically designed for space applications called the Space Quacker Advanced Development (SQuAD), which is an adaptation of their existing board called the Quaker Advanced Development (QUAD).

This project focuses on testing the existing SQuAD board design to make sure that it is flight-ready for deployment on Cal Poly CubeSat’s satellite, SAL-E. To achieve this, the project must ensure compatibility with Low Earth Orbit (LEO) conditions by testing the integrated high-power long-range (LoRa) receiver and enhanced hardware to meet …

2024 – 2025 Cal Poly Wind Power Ac-Dc Rectification Subsystem For Collegiate Wind Competition 2025, Ryan Rayos, Annabella Piercey, Alex Liu

Electrical Engineering

This project focuses on the design and development of a bidirectional AC-DC rectification subsystem for a wind energy conversion system (WECS), tailored for the 2025 Collegiate Wind Competition. The subsystem is defined by its core inputs and outputs where it receives AC power from the wind turbine generator and delivers stable DC power to auxiliary electronics and variable loads. Conversely, the system can also accept DC power, such as from wall power, and output AC power to drive the permanent magnet synchronous machine (PMSM) as a motor, overcoming cogging torque and initiating turbine blade rotation. This bidirectional functionality is enabled …

Expeditionary Ocean Power Generator, Ethan Gossard, Julian Steele, Alex Gray, Hunter Herring-Alderete

Electrical Engineering

Point Absorber Wave Energy Converters are currently being explored as a new form of energy harvesting. The Naval Facilities' Expeditionary Ocean Warfare Center (NAVFAC EXWC) has commissioned an interdisciplinary project for students at California Polytechnic State University, San Luis Obispo, to design a prototype Expeditionary Ocean Power Generator (ExOPG) for charging batteries in the ocean.

The Mechanical Engineering team is responsible for assembling the prototype chassis, which converts the vertical bobbing motion of a buoy into kinetic rotational energy that can be used to rotate a generator shaft. They are additionally tasked with isolating the electrical components from the harsh …

Modeling Battery Energy Storage Systems To Study The Effects Of Battery Chemistry And Operation On Power Quality, Lin E. Knudsen

Master's Theses

This thesis studies the impacts of battery chemistry (specifically lithium-iron phosphate, sodium-ion, and solid-state), AC voltage, battery size, charging mode, state of charge (SOC), active power draw, and power factor on the power quality of a Battery Energy Storage System (BESS). For harmonic evaluation, the metrics provided by the IEEE Standard 519 are used as a guideline to quantify voltage and current harmonics. A comprehensive MATLAB Simulink using Simscape Electrical is used to develop and simulate the models for the battery, DC-DC converter, AC-DC converter, and the grid. A total of 57 simulation cases varying the BESS factors are performed, …

High-Frequency Current And Voltage Sensing Buck Converter Compatible With Model Predictive Control, Cathy G. Chen, Lani K. Nguyen

Electrical Engineering

This paper presents the design and implementation of a high-frequency buck converter operating at 1 MHz, integrated with voltage and current sensing capabilities for enhanced output regulation. The primary objective is to minimize transient dips in output voltage commonly observed during load disturbances or switching events. The converter design is intended to be compatible with a Digitally Assisted Analog Computing Circuit (DAACC) for real-time model predictive control (MPC), which leverages fast analog elements with programmable digital components to solve a penalty-based reformulation of the quadratic optimization problem underlying conventional MPC.

Single-Sided Hearing Assistance Application, Harryson Nguyen, Jp Haratani

Electrical Engineering

The product is a hearing assistance smartphone application which aims to improve the quality of life of people with single-sided hearing loss/deafness by providing them with a cheaper and more reliable alternative to medically-prescribed hearing aids. Due to development setbacks, the product instead uses open-ear earbuds. Since the earbuds are not directly inserted into the user’s ear canals, they will not obstruct the hearing of the user’s non-deaf ear, and the user will still be able to hear the sounds that come from their non-deaf side. Some users may find that Bluetooth earbuds can be quite expensive, but are ultimately …

Wireless Communication In Autonomous Vehicles, Ethan Paul Spalard, Alan Rubalcava, Jarnail Singh Sanghera

Electrical Engineering

This project focuses on building a realistic, standards based V2X communication platform using DSRC (IEEE 802.11p) to support future autonomous vehicle control research. The system is built around commercial off-the-shelf (COTS) hardware, specifically the NXP i.MX 8XLite – V2X Evaluation Kit, which integrates an automotive-grade processor and the SAF5400 V2X modem to handle low-level DSRC transmission in the 5.9 GHz band.

We successfully completed the hardware bring-up, verified over-the-air communication between two nodes, and performed initial RF characterization using a spectrum analyzer. The SAF5400 was confirmed to operate on all seven DSRC channels (172–184), maintaining the correct 10 MHz bandwidth …

Piezoelectric Actuator Driver System, Daniel Hoefer

Electrical Engineering

This work presents the design, fabrication, and testing of a high-voltage piezoelectric actuator driver system purposed for integration into defense and aerospace precision motion control applications, particularly those in laser optics. The core challenge addressed was the mismatch between the standardized 28V DC power bus used in military systems and the significantly higher voltage requirements of piezoelectric actuators. Existing commercial drivers were evaluated and found unsuitable for field deployment due to inadequate ruggedness, excessive complexity, or power limitations. Consequently, a modular system architecture was designed featuring four independent driver channels, each using a high-voltage, high-current linear amplifier topology to scale …

Direction Finding From Aerial Platforms With Amateur Radio Arrays, Ben Duval Iii, Esteban Perez

Electrical Engineering

This senior project presents the development of a communication network designed to remotely control and program a distributed digital antenna array for autonomous synchronization and calibration. The system facilitates command transmission using a custom BPSK communication protocol operating in the UHF band (430–450 MHz) and employs a two-tone waveform to extract frequency, phase, and timing offsets between array nodes. These offsets are critical for aligning received signals in preparation for digital beamforming. The array comprises four nodes: three aerial units and one ground-based control unit. Each node is built using a LimeSDR Mini 2.0, Raspberry Pi, portable battery pack, and …

Mesh-Networked Uav Swarm: Experimental Leader-Follower Formation Control, Toma Grundler, Jack Ryan

Electrical Engineering

In recent years, unmanned aerial vehicles (UAVs) have demonstrated significant potential for multi-agent coordination applications, yet reliable formation control algorithms remain challenging to implement in real-world environments. This report presents the design, simulation, and hardware implementation of four leader-follower formation control strategies for UAV swarms. The implemented algorithms include a semi-rigid PI controller based on forward and lateral distance error, a hybrid PID controller utilizing mixed error signals with velocity and position feedback, a simplified velocity-based PID controller operating on individual coordinate components, and a GPS offset controller with direct positional control. MATLAB simulation validated controller performance in four different …

Framework For Multi-Agent Coordination And Distributed Localization In Micro-Uavs, Minwoo Park, Nikolas Tambornini

Electrical Engineering

Micro-UAVs (unmanned aerial vehicles) due to their inexpensive nature and compact form factor have shown an increase in prevalence throughout a multitude of applications including, but not limited to: search and rescue, military reconnaissance, and agriculture monitoring. However, for a majority of these high impact applications, a swarm of micro-UAVs are required and furthermore mandate that they are able to cooperatively and autonomously coordinate with each other. For long, controlling and communicating between a user and a singular micro-UAV has been a well known and solved problem, however the same can't be said for swarms of micro-UAVs. This project seeks …

Marine Energy Collegiate Competition - Polywave Energy, Beneda Loya, Isaiah Martinez, Emily Nicoletta, Michael Weber

Electrical Engineering

This document is the final Electrical Engineering senior project report for Cal Poly’s 2025 Marine Energy Collegiate Competition (MECC) team. The goal of this project is to build and test a wave-energy converter designed to address the need for sustainable power generation for remote coastal community microgrids. These existing systems often rely on costly, fossil-fuel generators, creating both logistical and environmental challenges. Our device aims to provide a renewable, low-maintenance solution that can operate reliably in offshore environments and serve commercial or research applications. The goal of the electrical engineering team was to develop a system that can convert rotational …

Synthetic Aperture Radar Processing For Increased Resolution Of Englacial Strata, Ava Stockman

Electrical Engineering

Glaciological research relies on a variety of remote-sensing methods to study the internal structure of glaciers and other bodies of ice. Synthetic Aperture Radar (SAR) serves as one method for imaging large cross sections of englacial strata, reducing the need for labor-intensive, costly, and hazardous ice coring expeditions and operations. Characterizing englacial structures using SAR images allows scientists to learn about the ice dynamics of past and present which provides the basis for discoveries about climate history and glacial dynamics. This project explores the benefits of employing various SAR processing methods to raw phase history data acquired through the British …

Digital Drone Arrays: Two-Tone Communication, Armin Behbahani, Alejandro Martin Cosper, Landon Leroy John Foster, Mont Ziadoon Murad

Electrical Engineering

Over the last few years, there has been great interest in distributed antenna arrays. These arrays require each element to be precisely located and synchronized with each other in time, phase, and frequency. To this end, a drone-mounted, two-tone communication system was developed. It uses a transmit-retransmit-receive architecture, which obtains all of the necessary data required to compute and correct the phase, frequency, and time differences between each element while estimating distance. When integrated into a distributed array of drones, this two-tone communication system will be essential for reliable operation.

Test Equipment Automation And Remote Operation Curriculum Senior Project, Raheel Rehmatullah

Electrical Engineering

The goal of this project is to create new lab procedures and lab bench permutations for Cal Poly EE students to implement automated Test and Measurement equipment into their electrical engineering education. Currently EE students at Cal Poly have no classroom based opportunities to learn about leveraging software skills and test equipment knowledge in order to automate measurements, which is a valuable skill for an electrical engineer in the workforce. The curriculum outlined in this project will include three experiments, each leveraging an instrument controller, and Python as the primary scripting language. Each procedure will require students to write Python …

Autonomous Mapping Rover, Garrett Jones, Timothy Kyle Chu, Eugenio Caruso Pasos

Electrical Engineering

This report details the design, implementation, and evaluation of "Rovero," an autonomous mapping rover developed as a senior project. Rovero integrates state-of-the-art technologies, including ROS2 for communication, SLAM algorithms for mapping, and sensor fusion for accurate navigation. The project aimed to achieve robust autonomous operation in indoor environments, leveraging a combination of LiDAR, IMU, and encoder data for real-time decision-making. Key challenges addressed include path planning, obstacle avoidance, and integration of multiple sensor inputs. Results demonstrate successful mapping capabilities and efficient navigation performance.

Project Owl: Quad Rc2, Ethan Cy Zane

Electrical Engineering

Quad RC2 is a new radio designed to be compatible with the Cluster Duck Protocol (CDP). It must be able to act as all parts of the mesh network and be able to find its location with GPS. Much of the RC2 effort is already completed. This project ports the previously developed firmware to the new board and runs tests to assess its capabilities.

An Analysis Of The Power Consumption Of Various Computer Vision Machine Learning Techniques On A Microcontroller Utilizing The Clusterduck Protocol, Kaveh Shafiei

Electrical Engineering

Constant data processing is essential for effective data collection, particularly in remote and hard-to-reach areas. The need for efficient, autonomous data acquisition and transmission is increasingly addressed by integrating machine learning within larger communication networks. This paper explores the application of machine learning techniques with Internet of Things (IoT) mesh networks. Utilizing the LoRa communication protocol, data is captured and analyzed on an edge device and transmitted to a larger communication network. The ClusterDuck Protocol (CDP), developed by OWL Integrations, serves as an IoT mesh network designed to allow for communication in areas lacking traditional static infrastructure such as WiFi …

Leader-Follower Platooning With Turtlebot3: A Low-Cost Ros Test-Bed Using Vision-Lidar Fusion, Patrick Kelly Crandall, Kalon Ma Bienz

Electrical Engineering

This report presents the design, implementation, and indoor validation of a two-robot leader–follower platoon built on low-cost Turtlebot3 platforms. Each robot runs ROS Noetic on an on-board Raspberry Pi 4, fusing a fisheye camera for HSV-based lane detection with an LDS-02 LiDAR for clustering-based leader identification. A dual-loop architecture (PD steering for lateral control and PID for longitudinal gap regulation) maintains a 0.40m headway and keeps the follower centered within +/- 5 cm of the lane midline, without any inter-vehicle communication or external localization. Track experiments at speeds up to 0.18m/s achieved mean gap error of +/- 3 cm and …

Advanced Light Dimming Power Converter, Jaden Nguyen, Edwin Lin, Alan Thai

Electrical Engineering

This senior project discusses and follows the development of the Advanced Light Dimming Power Converter meant to modernize the power electronics curriculum and improve student safety for a lab. The power converter attempts to replace the original experiment which includes a traditional TRIAC-based dimmer and focuses on demonstrating phase angle control for incandescent light bulbs. However, several drawbacks including high-voltage exposure and outdated technology warranted a revamp. The redesigned module includes a dual-experiment setup with an updated TRIAC-based dimmer circuit and a new AC-DC LED driver circuit with constant current control and PWM dimming capability. Both systems have been fabricated …

Hydropower Collegiate Competition, Aiden D. Foster, Devon Bountry, Joanna Vo, Timothy Rinker, Amanda Rodriguez, Minh Nguyen, Eli Haushalter, Sophie Watkinson, Maiya Holton, Breanne Evans

Mechanical Engineering

The Cal Poly SLO HCC team presents a feasibility study and engineering design review package for retrofitting the non-powered Ritschard Dam in Colorado into a hydroelectric facility as part of the 2025 Hydropower Collegiate Competition. Through a rigorous and multi-staged assessment of plausible dam sites in the western US, the team has chosen the Ritschard Dam in Colorado to implement an electromechanical component designed to accommodate a large range of flowrates stemming from a large variance in upper reservoir capacity due to geographical and climate effects. The team evaluated non-powered dams based on technical feasibility, electric grid proximity, power generation …

Modeling And Efficiency Analysis Of Hybrid Ac/Dc And Conventional Ac House Electrical Systems For Net-Zero Energy Homes, Tyler Bury

Master's Theses

This thesis presents the design, simulation, and comparative efficiency analysis of hybrid AC/DC residential homes versus conventional AC homes for Net Zero Energy Homes (NZEH). Motivated by the increasing prevalence of DC-native technologies such as solar photovoltaics, battery storage, and DC-powered electronics, this work evaluates whether hybrid AC/DC distribution can offer measurable efficiency benefits over traditional systems. Twelve detailed house models were developed—six employing a hybrid AC/DC architecture and six based on conventional AC systems, each supplying a combination of AC and DC residential loads. Simulations were conducted using MATLAB/Simulink to model steady-state efficiency under various loading conditions. Grid configurations …

Compact, Low-Power Underwater Acoustic Modem Characterization And Sensing Network Node Implementation, Lucas W. Lucia

Master's Theses

There is a growing market for compact, power-efficient underwater communication technology. Due to the limited propagation of electromagnetic waves through water, modulated acoustic waves have emerged as an effective means of wireless communication underwater. In decades past, many acoustic modems had been developed primarily for defense customers in larger systems functioning at high power. In recent years, smaller, relatively inexpensive acoustic modems have become available on the market—but data on their performance in a real-world environment is scarce. Companies such as OWL Integrations are interested in employing such acoustic modems as part of sensing networks across multiple mediums. For such …

Improvements To Cal Poly's Hybrid Ac/Dc House, Brandon Ng, Andrew Nguyen, Logan Tom

Electrical Engineering

This senior project details the improvements made to Cal Poly’s Hybrid AC/DC House project. The previous state of the house experienced issues with proper reading of the current power being drawn from the connected AC sources, as well as with the system’s multiple-input single-output converter, where thermal overheating of specific FETs prevented the system from reaching its maximum output power. The updates made to the AC/DC house include improved code to prevent faulty readings and display failure and a cleaned-up power monitoring board that removes noisy signals and allows for the correct power implementation to be displayed. In addition, the …