Electrical and Computer Engineering Commons^™

Distributed Formation Control Of Nonholonomic Mobile Robots: Safety-Critical Leader-Follower Approach With Obstacle Avoidance And Dynamic Reconfiguration, Kelvin C. Villago

Master's Theses

Networked control systems for multi-agent robotics have emerged as a critical paradigm for executing complex coordinated tasks in diverse environments. While formation control serves as the backbone of such systems, real-world deployment introduces significant challenges including communication constraints, environmental obstacles, and the need for adaptive reconfiguration. This research addresses these challenges by developing a novel unified framework that seamlessly integrates obstacle avoidance algorithms with dynamic formation reconfiguration capabilities, specifically designed for communication-limited networked control architectures. The proposed framework represents a significant advancement over existing approaches by simultaneously handling both static and dynamic obstacles while maintaining system cohesion under communication constraints. …

Ev Microgrid Inspired Open-Source Power Inverter, Bryan A. Carrillo Martinez

Master's Theses

The development of open-source power electronics platforms plays an instrumental role in accelerating microgrid deployment, electric vehicle (EV) integration, and educational access to embedded power electronic converters. This thesis presents the design, implementation, and validation of the Atinverter V2, an open-source DC to AC inverter intended for low power EV microgrid applications and educational settings. The Atinverter V2 integrates various hardware and software subsystems centered around the ATMEGA328P microcontroller, enabling PWM-based sinusoidal power inversion, DC/AC voltage and current sensing, and embedded control features. Software development leverages a C++ object-oriented library and multiple Arduino-based modules to facilitate modular and scalable operation. …

Hybrid Computing For Real-Time Model Predictive Control Of A Buck Converter, Grace Paladichuk

Master's Theses

Advancements in power electronics require high switching frequencies which the digital control routines of the systems cannot keep up with. Analog computing is added to digital control systems to prevent bottlenecks and allow real-time implementation. This paper proposes a hybrid computing model predictive control system for a buck converter. The control system implements the gradient dynamics of the optimization function using digital computing, and the gradient dynamics for the penalty function and integrator using analog computing. For the full simulations of the entire system, the PLECS RT Box is used to simulate the controller in real time with a 1 …

Single-Sideband Pulse Width Modulation For Parametric Acoustic Arrays, Douglas Liu

Master's Theses

Parametric acoustic arrays are directional loudspeakers that operate using ultrasonic carriers to project sound within a narrow beam. Input audio is first modulated onto an ultrasonic carrier and transmitted through air, where it self-demodulates into audible frequencies in the far field.

This thesis introduces a method for preprocessing audio into scaled quadrature signals using a passive analog polyphase filter. These signals are modulated using microcontroller-generated waveforms to create quadrature ultrasonic pulse-width modulation (PWM) signals. The modulated outputs are combined through a wired-OR summer, producing single-sideband ultrasonic content at the desired frequency of 40 kHz. This signal is amplified through high-efficiency …

Development Of A Versatile Switching Mode Inverter Laboratory Module, Zachariah Lee Mustar

Master's Theses

DC-AC converters, or inverters, are complex devices that play an essential role in photovoltaic, energy storage, and microgrid systems. Therefore, they constitute a class of power electronics that any power-focused electrical engineering student should be familiar with. This thesis presents the development and testing of a single device that power electronics students will use in a laboratory setting to experiment with each of the four different switching techniques employed in inverters: a simple square wave (SSWI), modified square wave (MSWI), bipolar PWM, and unipolar PWM. The module was built with a physically modifiable control stage and a power stage constituting …

Design, Analysis, And Implementation Of An Improved Zero Voltage Switching Hybrid Voltage Divider, Luke V. Cerda

Master's Theses

This thesis entails the study, design, and construction of a novel DC-DC converter topology, the Zero Voltage Switching Hybrid Voltage Divider (ZVS-HVD), with improved modularization, optimization, and compactness. The ZVS-HVD facilitates higher load currents and accomplishes DC-DC voltage division through switching inductors and capacitors. Low switching loss is achieved through zero voltage switching (ZVS) and the use of GANFET switches. An analysis of duty cycle and high-frequency operation is conducted, enabling 1 MHz switching and improvements in output voltage ripple, voltage drooping, board size, and efficiency at higher load currents. Two versions of ZVS-HVD prototypes were constructed with on-board signal …

Study On The Application Of Smart Electric Meters For Secondary Voltage Protection, Jayaditya Sisodia

Master's Theses

The purpose of our research is to utilize PG&E’s Smart Meters installed across California to protect the Secondary Voltage delivered to the meter. This means detecting electrical faults between the utility’s distribution transformer and the installed Smart Meter. Our goal is to propose and implement various solutions through additional devices and protocols to detect and prevent these faults, communicate them with the meter, and forward fault information to the utility. A device will be designed to be installed on the transformer, detect faults, shut off power transmission, and communicate to the meter via fiber optic cable. Research will then be …

Remote Monitoring And Control Of Protection Relays Via Programmable Logic Controller, Rio Mcgown-Kauffman

Master's Theses

The purpose of this study is to explore the ability of a programmable logic controller (PLC) to wirelessly monitor and control power protection relays. The technologies surrounding power protection and industrial automation are ever evolving and have developed significantly in recent history. Industrial power applications call for consistent condition monitoring and status updates for various high-importance components. The high-importance components have power protection schemes that are managed by digital relays to trip circuit breakers in fault or unsafe operating conditions. The smart relays have a wide range of capabilities, including communications. Cal Poly assembled a collection of relays from Schweitzer …

Design Of A Novel Low-Cost Hybrid V-Shape Spoke-Type Ferrite Ipm-Synrm For Ev Traction Using Fem Software, Kenghao Cai

Master's Theses

This paper presents a hybrid V-shape spoke type ferrite Interior Permanent Magnet Synchronous Reluctance Machine (PMA-SynRM) for electric vehicle traction application. Ferrite or ceramic IPM-SynRMs compared to Neodymium (NdFeB) based IPM-SynRMs typically have lower torque, power density, and efficiency overall. Motivated by rising costs and international policies making it increasingly more challenging to obtain rare-earth metals, alternatives should be explored. With the help of finite element method (FEM) software, Ansys Maxwell, this study probes into a novel three-phase ferrite-only hybrid Spoke-type V-shaped IPM-SynRM using Tesla Model 3's neodymium powered V-shape interior permanent magnet machine as a benchmark. The proposed motor …

A Heuristic Approach To Portrait Segmentation And Its Application To Synthetic Bokeh Generation, Charles J. Snead

Master's Theses

Segmentation of portrait images is an important technique used to separate the foreground and background of an image. This separation of layers is useful for selectively applying post-processing techniques to enhance the quality of the image, such as blurring the background. Automatic portrait segmentation is a complex process that can be completed with a high degree of accuracy using deep learning with neural networks, but training and inference are often very computationally expensive. This thesis aims to take a heuristic approach to portrait segmentation by combining classical image processing and computer vision techniques into a solution that can be run …

Optimizing And Training An Svm-Based Breast Cancer Tumor Classifier, Kevin Lopatka

Master's Theses

With advancements in technology, turning to machine learning has become a popular choice for aiding clinicians in the diagnoses of breast cancer malignancies. While the neural networking approach has been vetted thoroughly, this work aims to take advantage of traditional machine learning techniques; mainly support vector machine learning and the optimizing of feature extraction. The discrete-wavelet transform is used in the feature extraction stage of machine learning. Previous works that use this feature extraction technique are analyzed and expanded upon by utilizing a variety of different wavelets as well as other color-spaces with the goal of achieving higher result metrics …

Enhanced Post-Capture Automatic White Balance For Srgb Images, Eric Huang

Master's Theses

Automatic white balancing (AWB) aims to correct color casts caused by varying illumination conditions, typically assuming access to RAW sensor data. However, many real-world applications involve only sRGB images that have already been processed by in-camera pipelines. In these cases, traditional AWB algorithms often underperform due to the nonlinear transformations done by these pipelines.

This thesis builds upon a data-driven color correction framework introduced by Afifi et al. that relies on RGB-UV histograms and learned color transforms. A revised automatic white balancing (AWB) framework that improves both color accuracy and runtime efficiency is proposed. A fallback routine is implemented to …

Modeling And Analysis Of A Hybrid Ac/Dc Green Seaport Power System With Photovoltaic Generation And Battery Energy Storage Systems, Corey Zaas

Master's Theses

This thesis investigates the modeling, simulation, and analysis of a Green Seaport power system integrating photovoltaic (PV) generation, battery energy storage systems (BESS), and coordinated protection within a hybrid AC/DC framework. The work improves a previously established model, enhancing it with detailed protection studies and simultaneous AC/DC power flow analysis using EasyPower software. The system was evaluated under a wide range of operating conditions, including varying solar irradiance, battery charge and discharge states, and both full and zero load conditions. Key performance indicators included voltage regulation, power factor behavior, equipment loading, protection device coordination, and total system power losses. Simulation …

Performance Of Neural Networks On Fpga For Embedded Devices Using Hls4ml Framework, Alam N. Romo Lopez

Master's Theses

As machine learning models such as neural networks are investigated for their applications across many fields, the demand for models that can be implemented on an embedded device grows. Field Programmable Gate Arrays (FPGAs) have become an attractive option for implementing these models in hardware. This thesis considers the viability of FPGA implementations for machine learning on low-resourced embedded systems. The hls4ml project is a promising prospect for machine learning on FPGA devices. To test hls4ml, we used a model trained on the MNIST digits dataset, which was then synthesized for the PYNQ-Z2 device. We fine tuned the performance by …

Yolot: A Recurrent Yolo Model For Robust Video-Based Automotive Object Detection, Dylan Jay Baxter

Master's Theses

Though incredibly effective at detecting objects in isolated frames, modern object detection models are often not designed to take advantage of information present in previous frames of a video stream, despite that data being readily avail- able. To address this shortcoming, this paper proposes YOLOT, a modification of the widely used YOLOv8 object detection model, which seeks to utilize this temporal information with the addition of recurrent structures. In the design of YOLOT, a series of recurrent convolutional modules were inserted at backbone and neck outputs and the final and most effective design was found to be the insertion of …

Risc-V Gpu Acceleration On Low-Cost Embedded Systems, Fadi M. Alzammar

Master's Theses

The Vortex project from Georgia Institute of Technology was created to provide an open-source hardware and software GPGPU research platform based on RISC-V. Skybox was introduced as an extension to Vortex to provide dedicated support for 3D graphics rendering acceleration as a complete GPU platform. This work presents contributions to the render output unit of Skybox, including the development of a blend unit, cache bypassing mechanisms, and performance monitoring metrics. With these, Skybox has succeeded in its goal of accelerating graphics rendering on RISC-V platforms. This work also establishes a foundation for adapting Vortex to low-cost embedded platforms such as …

Dc To Ac Voltage Source Converter Control System, Mohummad Tark Elgassier, Jordan M. Reichhardt, Brayden Richard Young

Electrical Engineering

The Voltage Source Converter Control System integrates a control system for a 2-phase half-bridge voltage source converter (VSC) utilizing a TMS320F2837xD Dual-Core Real-Time Microcontroller. VSCs are critical for the integration of power production into the power grid. They allow for accurate control over DC-AC energy conversion. Additionally with the improvement of renewable energies VSCs play a critical role in controlling the flow of these environmentally controlled and more unpredictable sources of energy. The control system regulates the output current and voltage, regulates switching patterns, and maintains power stability under varying loads. Within the control system Digital control systems, PWM generation, …

Perceptual Hash Based Content Matching, Nicholas Daniel Chenevey

Master's Theses

The proliferation of video content and AI generated imagery has introduced a number of new challenges in content identification and verification. The ability to trace content back to its source has become a critical problem as video content increases both naturally and synthetically through AI generation. This thesis provides the design, analysis, and experimental verification for a perceptual hash based framework aimed at addressing these challenges. Perceptual hashing is a method for encoding the visual content of images into compact and easily comparable binary strings. This process is used as the foundation for content matching in videos and source verification …

Photophoretic Optical Particle Trapping Improvements Using Beam Reflection, Ian A. Garcia, Xiaomin Jin Phd., Kun Hua Phd.

Master's Theses

Current research has shown that photophoretic optical trapping (POT) is a promising method for creating true three-dimensional holograms. A landmark study by Smalley et. al. at BYU was able to generate a full hologram within a 2 cm edge cube with remarkable success. However, a key drawback to this method is its poor ability to hold trapped particles within the focal point of the laser for an extended period of time. An investigation from our group presented at SPIE Photonics West 2023 sought to improve these results by varying the focal length of the trapping and the wavelength of the …

Low-Cost Vehicle Controller Testing System, Kevin R. Jung

Electrical Engineering

This project aims to create a system to facilitate easier evaluation of PCBs designed for low-voltage vehicle applications with an emphasis on accessibility for student teams in collegiate design series' such as Formula SAE. Student teams or smaller vehicle electronics manufacturers often need to verify designs and validate functionality during both development and manufacturing. An inexpensive, small, and portable, yet capable, system for taking measurements and simulating inputs would allow designers to put their boards into vehicle-representative conditions and environments without needing to connect to actual vehicle hardware. Additionally, while systems exist off-the-shelf that could fulfill the requirements needed by …

Open-Source Cubesat Flight Board, Braydon M. Burkhardt

Electrical Engineering

The Helmsman Flight Board is an open-source main flight computer and electrical power system for educational and entry-level CubeSats. The board incorporates commercial off-the-shelf (COTS) components in conjunction with simplified monitoring and management circuitry, supporting easy adoption, modifiability, and affordability while crucially enabling the emerging aerospace industry’s rapid ‘design-build-test’ methodology in student satellite teams. Its design includes essential CubeSat subsystems such as battery management, command and data handling, attitude determination, on-board processing, and is built to support real-time embedded operating systems. Key features include an Arm Cortex-M7 based STM32, radiation-resistant memory for OS storage, bulk Flash memory, real-time clock, two …

Hypoxic Incubator: Improving Robustness/Reliability And Demonstrating Physiological Efficacy, Damon Dennis Tan

Master's Theses

The Microphysiological Systems Laboratory aims to develop colorectal cancer tumor models under a hypoxic environment to assess model response to pharmaceutical compounds in vitro. To perform relevant studies, researchers have attempted to use different hypoxic inducing strategies such as a nitrogen pod and hypoxic incubator to recreate in vivo physiological responses to hypoxia. However, studies would be interrupted due to incubator functionality failure. To ensure successful and physiologically relevant studies, I improved and verified the robustness and reliability of a hypoxic incubator previously designed and manufactured in the lab. Through the testing and iterating design processes, I engineered and implemented …

3d Printed Microfluidic Fabrication Methodology, Characterization, Mechanical Design, And Applications In Electrostatic Artificial Muscles And Benthic Microbial Fuel Cells, Terak B. Hornik

Master's Theses

The fabrication of microfluidic devices often requires specialized methods. The development of these methods requires careful characterization and understanding of the processes involved. Using primarily PolyJet 3D printing technology, microfluidics offers a wide scope of applications such as microfluidic benthic microbial fuel cells (MBMFCs) and electrostatic artificial muscles. MBMFCs benefit from the confinement of the microbes resulting in close proximity between the electrode and the organisms. Using a modular design called the Sponge, assembly and upscaling is possible. Electrostatic artificial muscles benefit from a microfluidic approach due to the non-linearity of electrostatic attraction creating disproportionate benefits when miniaturized. When designed …

Remote Operated Amateur Radio Using Raspberry Pi And Limesdr, Esteban I. Perez

College of Engineering Summer Undergraduate Research Program

This project presents the design and implementation of a portable, remotely programmable amateur radio system operating on the 2-meter and 70-cm bands. The system utilizes Raspberry Pi 5 and LimeSDR hardware to facilitate communication between aerial and ground units, allowing for efficient transmission and reception of synchronization and calibration waveforms. A custom communication protocol incorporating BPSK modulation and a two-tone signaling mechanism enables time-of-flight measurements for calculating distances between nodes. This low-cost solution has potential applications in civilian sectors, such as search and rescue operations, where accurate direction finding and target localization are critical. Full-duplex operation enhances the system's capability …

This Is An Automated Software Platform For Grid Interconnection Of Renewable Energy Resources., Cathy Chen, Lani Nguyen

College of Engineering Summer Undergraduate Research Program

To help curb climate change, the United States is rapidly electrifying many sectors of the energy economy, such as transportation (electric vehicles) and home heating (electric heat pumps). Thus, recent years have witnessed an explosion of businesses that want to connect and operate energy resources on the electric grid. However, getting an energy resource connected to the grid is an arduous process that takes years or more, requires specialized technical knowledge, and requires navigating complex and varying regulatory procedures. This project will develop a software platform that leverages AI and high-performance computing to automate and accelerate grid interconnection and energy …

Measurement Automation & Measurement System Research Endowment, Brian Bivinetto, Beneda Loya, Shiron Bendrihem

College of Engineering Summer Undergraduate Research Program

Road travel safety is always the most important issue in transportation systems. In general, several factors cause road accidents, such as human error, vehicle mechanical failure, roadway limitations (e.g. pavement, lane geometry, etc.), and inclement weather conditions. The major focus of today’s transportation developments is related to making highway transportation safer, smarter, and greener to enhance livability. Many accidents are caused when drivers lack a better understanding of the surrounding traffic conditions because the driver not only needs to control his/her vehicle but also needs to be aware of the movements of the vehicles around him/her. A driver cannot be …

Sal-E: Responsive Space Pathfinder Mission, Liam Duckworth, Berfredd Quezon

College of Engineering Summer Undergraduate Research Program

The main objective of the SAL-E mission is to grow the Cal Poly CubeSat Lab’s (PolySat) capabilities in rapid spacecraft design, as well as to provide the current generation of students with the opportunity to design, test, integrate, and communicate with a satellite. This summer we will be focusing on a few aspects of the spacecraft design and preparing our test facilities for Fall. Specifically, we will be ordering electronics boards that were designed in Spring, testing the boards as they arrive, developing software to interface with the payloads, begin integrated testing, updating the control system in our thermal vacuum …

Drive To Succeed: Empowering Underserved Communities Through Autonomous Driving Education, Amanda I. Chan

College of Engineering Summer Undergraduate Research Program

Autonomous vehicle (AV) technology represents the leading edge of innovation in transportation and holds immense potential to transform industries across the globe, with California at the forefront. However, access to education and technical training in this field has often been out of reach for students in underserved communities. The “Drive to Succeed” project endeavors to bridge this gap by introducing autonomous driving technology to high school students in communities where access has traditionally been limited. We propose an outreach program specifically designed to address the underrepresentation of marginalized groups in technology sectors and cultivate the next generation of engineers from …

Distributed Multi-Robot Localization And Coordination Framework For Mobile Robots, Dmitri Dobrynin, Indigo T. Garcia

College of Engineering Summer Undergraduate Research Program

This project aims to develop an experimental framework for multiple mobile robots, both in simulation and real-world hardware, using ROS 2 as the primary operating system. Utilizing TurtleBot 3 platforms, the team will establish a robust setup that enables tasks such as distributed localization, autonomous navigation, path planning, and formation control for mobile robots. Leveraging simulation environments like Gazebo, the project will replicate real-world setups in a simulated environment for testing and development. All tasks, communication, and sensor integration will be implemented using ROS 2, ensuring seamless coordination and interoperability among the robots. The project involves integrating various sensors and …

Dual Base Sige Is-Hbt For Use In Biosensing Applications, Liam Stephen Hayes

Master's Theses

The proposed research is for a novel SiGe-based Ion-Sensitive Dual Hetero-junction Bipolar Transistor (IS-HBT) to be used in both trans-dermal biological sensing as well as Lab-on-Chip (LOC) applications. The end goals for the device designed are two: For one, the research done for this work will be used to substantiate the claims made by Zafar et al. [1] that an HBT-style structure is better suited for biosensing application rather than a conventional Field Effect Transistor (FET) based geometries. Secondly, it provides the final element to be integrated along with a selectivity membrane, as well as with a reverse-iontophoresis system to …