Computer Engineering Commons^™

Large-Scale Design Optimization Of Pm Machines Over A Target Operating Cycle, Alireza Fatemi, Nabeel Demerdash, Thomas W. Nehl, Dan M. Ionel

Electrical and Computer Engineering Faculty Research and Publications

A large-scale finite element model-based design optimization algorithm is developed for improving the drive-cycle efficiency of permanent magnet (PM) synchronous machines with wide operating ranges such as those used in traction propulsion motors. The load operating cycle is efficiently modeled by using a systematic k-means clustering method to identify the operating points representing the high-energy-throughput zones in the torque-speed plane. The machine performance is evaluated over these cyclic representative points using a recently introduced computationally efficient finite element analysis, which is upgraded to include both constant torque and field-weakening operations in the evaluation of the machine performance metrics. In contrast …

Mems-Based Terahertz Photoacoustic Chemical Sensing System, Nathan Glauvitz, Ronald A. Coutu Jr., Ivan R. Medvedev, Douglas T. Petkie

Electrical and Computer Engineering Faculty Research and Publications

Advancements in microelectromechanical system (MEMS) technology over the last several decades has been a driving force behind miniaturizing and improving sensor designs. In this work, a specialized cantilever pressure sensor was designed, modeled, and fabricated to investigate the photoacoustic (PA) response of gases to terahertz (THz) radiation under low-vacuum conditions associated with high-resolution spectroscopy. Microfabricated cantilever devices made using silicon-on-insulator (SOI) wafers were tested in a custom-built test chamber in this first ever demonstration of a cantilever-based PA chemical sensor and spectroscopy system in the THz frequency regime. The THz radiation source was amplitude modulated to excite acoustic waves in …

Surface Feature Engineering Through Nanosphere Lithography, Tod V. Laurvick, Ronald A. Coutu Jr., James M. Sattler, Robert A. Lake

Electrical and Computer Engineering Faculty Research and Publications

How surface geometries can be selectively manipulated through nanosphere lithography (NSL) is discussed. Self-assembled monolayers and multilayers of nanospheres have been studied for decades and have been applied to lithography for almost as long. When compared to the most modern, state-of-the-art techniques, NSL offers comparable feature resolution with many advantages over competing technologies. Several high-resolution alternatives require scan-based implementation (i.e., focused ion beams and e-beam lithography) while NSL is much more of a batch operation, allowing for full wafer or possibly even multiple wafer processing, potentially saving time and increasing throughput in a manufacturing environment. Additionally, NSL has continued to …

Haptic Foot Feedback For Kicking Training In Virtual Reality, Hank Huang, Hong Tan

The Summer Undergraduate Research Fellowship (SURF) Symposium

As means to further supplement athletic performances increases, virtual reality is becoming helpful to sports in terms of cognitive training such as reaction, mentality, and game strategies. With the aid of haptic feedback, interaction with virtual objects increases by another dimension, in addition to the presence of visual and auditory feedback. This research presents an integrated system of a virtual reality environment, motion tracking system, and a haptic unit designed for the dorsal foot. The prototype simulates a scenario of virtual kicking and returns haptic response upon collision between the user’s foot and virtual object. The overall system was evaluated …

Study On Oil Palm Fresh Fruit Bunch Bruise In Harvesting And Transportation To Quality, Andreas Wahyu Krisdiarto, Lilik Sutiarso

Makara Journal of Technology

There are losses of production due to oil palm field’s material handling. Activities that may raise the losses are harvesting and transportation, which may cause bruise and damage to fruit. This research was aimed to learn the bruise of fresh fruit bunch (FFB) phenomenon in harvesting and transportation. Method used in this research was measuring the bruise area resulted by FFB falling when harvested, loading (throwing up) FFB to truck bin, and transporting using truck. These data, coupled with weight of bruised fruit, were calculated to get FFB bruise index. Each FFB bruise index is related to potential free fatty …

Automatic Arrhythmia Beat Detection: Algorithm, System, And Implementation, Wisnu Jatmiko, I Md. Agus Setiawan, Muhammad Ali Akbar, Muhammad Eka Suryana, Yulistiyan Wardhana, Muhammad Febrian Rachmadi

Makara Journal of Technology

Cardiac disease is one of the major causes of death in the world. Early diagnose of the symptoms depends on abnormality on heart beat pattern, known as Arrhythmia. A novel fuzzy neuro generalized learning vector quantization for automatic Arrhythmia heart beat classification is proposed. The algorithm is an extension from the GLVQ algorithm that employs a fuzzy logic concept as the discriminant function in order to develop a robust algorithm and improve the classification performance. The algorithm is tested against MIT-BIH arrhythmia database to measure the performance. Based on the experiment result, FN-GLVQ is able to increase the accuracy of …

Optimization Of Electricity Generation Schemes In The Java-Bali Grid System With Co2 Reduction Consideration, Farizal Farizal, Wenty Eka Septia, Amar Rachman, Nasruddin Nasruddin, Teuku Meurah Indra Mahlia

Makara Journal of Technology

This research considers the problem of reducing CO2 emissions from the Java-Bali power grid system that consists of a variety of power-generating plants: coal-fired, natural gas, oil, and renewable energy (PV, geothermal, hydroelectric, wind, and landfill gas). The problem is formulated as linear programming and solved using LINGO 10. The model was developed for a nation to meet a specified CO2 emission target. Two carbon dioxide mitigation options are considered in this study, i.e. fuel balancing and fuel switching. In order to reduce the CO2 emissions by 26% in 2021, State Electric Supply Company (PLN) has to generate up to …

Apparent Porosity And Compressive Strength Of Heat-Treated Clay/Iron Sand/Rice Husk Ash Composites Over A Range Of Sintering Temperatures, M. Nizar Machmud, Zulkarnain Jalil, Mochammad Afifuddin

Makara Journal of Technology

Novel composites of clay/iron sand/rice husk ash (RHA) have been developed. Electric furnace was used to perform heat treatment on the composites to study the effect of sintering temperature on their apparent porosity and compressive strength. Two types of RHA with different bulk density were prepared to gain an understanding of the influence of apparent porosity on compressive strength of the heat-treated composites over a range of sintering temperatures. Heattreated composites, made of clay/iron sand and clay/RHA, were also prepared as a referenced material. X-ray diffraction (XRD) analysis was further performed to comprehensively discuss the role of iron sand on …

The Effect Of Irradiation Of Fe And Ar Ion On The Surface Morphology Of Diamond Thin Film Related To The Magnetoresistance Property, Salim Mustofa, Setyo Purwanto, Kenji Mishima

Makara Journal of Technology

The irradiation of Fe and Ar ion was applied on the surface of diamond/Si thin film to know its effect on the morphology of thin film.The magnetoresistance property was also studied. Ion irradiation treatment using Fe ion followed by argon ion at the energy of 70keV and a dose of 1 x 1015 ion/cm2 have been conducted on the surface of two types of thin film, diamond/Si (111) and diamond/Si (100). Both thin films were made by using a CVD method, and the thickness of the thin film is 1000-nm. From simulations using the software called Stopping and Range of …

Use Of Green Mussel Shell As A Desulfurizer In The Blending Of Low Rank Coal-Biomass Briquette Combustion, Mahidin Mahidin, Asri Gani, M. Reza Hani, Muhammad Syukur, Hamdani Hamdani, Khairil Khairil, Samsul Rizal, Abdul Hadi, T.M.I. Mahlia

Makara Journal of Technology

Calcium oxide-based material is available abundantly and naturally. A potential resource of that material comes from marine mollusk shell such as clams, scallops, mussels, oysters, winkles and nerites. The CaO-based material has exhibited a good performance as the desulfurizer or adsorbent in coal combustion in order to reduce SO2 emission. In this study, pulverized green mussel shell, without calcination, was utilized as the desulfurizer in the briquette produced from a mixture of low rank coal and palm kernel shell (PKS), also known as bio-briquette. The ratio of coal to PKS in the briquette was 90:10 (wt/wt). The influence of green …

The Knowledge-Based Analysis On Medium Resolution Images Of Remote Sensing To Extraction Information Land Use Type Scs-Cn, The Case Study On Grompol Watershed, Puguh Dwi Raharjo, Totok Gunawan, Mohammad Pramono Hadi

Makara Journal of Technology

Remote sensing imagery Landsat-8 is one image that has a good temporal resolution; in addition to the availability of data, this image can be obtained free of charge. Land cover type SCS-CN is part of a unit of land that affects runoff. The use of medium resolution imagery in reducing the SCS-CN land use type is considered relatively difficult, and it yields less good accuracy. Limitations on multispectral classification only rely on facts derived from spectral reflection, so that the two data are the same since different characteristic results are not so good. This study aims to determine the accuracy …

Sugarcane Bagasse As A Carrier For The Immobilization Of Saccharomyces Cerevisiaein Bioethanol Production, Sita Heris Anita, Wibowo Mangunwardoyo, Yopi Yopi

Makara Journal of Technology

Sugarcane bagasse was used as a carrier to immobilize Saccharomyces cerevisiae in bioethanol production. This research aims to study the potential use of sugarcane bagasse as an alternative carrier for cell immobilization and improvement in the production process of cell immobilization in bagasse. The results showed that the physical characteristics of sugarcane bagasse as a carrier were water content (7.77 ± 0.35%), water retention (4.80 ± 0.44 g/g), water absorption index (8.58 ± 0.22 g/g), and lignin content (24.40 ± 1.52 %). Determination of cell retention was performed in an inoculum volume of 50 mL yeast suspension with various carrier …

Anti-Forensics: Furthering Digital Forensic Science Through A New Extended, Granular Taxonomy, Kevin Conlan, Ibrahim Baggili, Frank Breitinger

Electrical & Computer Engineering and Computer Science Faculty Publications

Anti-forensic tools, techniques and methods are becoming a formidable obstacle for the digital forensic community. Thus, new research initiatives and strategies must be formulated to address this growing problem. In this work we first collect and categorize 308 antidigital forensic tools to survey the field. We then devise an extended anti-forensic taxonomy to the one proposed by Rogers (2006) in order to create a more comprehensive taxonomy and facilitate linguistic standardization. Our work also takes into consideration anti-forensic activity which utilizes tools that were not originally designed for antiforensic purposes, but can still be used with malicious intent. This category …

Fast Voxel Line Update For Time-Space Image Reconstruction, Xiao Wang

Open Access Theses

Recent applications of model-based iterative reconstruction(MBIR) algorithm to time-space Computed Tomography (CT) have shown that MBIR can greatly improve image quality by increasing resolution as well as reducing noise and some artifacts. Among the various iterative methods that have been studied for MBIR, iterative coordinate descent(ICD) has been found to have relatively low overall computational requirements due to its fast convergence. However, high computational cost and long reconstruction times remain as a barrier to the use of MBIR in practical applications. This disadvantage is especially prominent in time-space reconstruction because of the large volume of data. This thesis presents a …

Three Dimensional Moving Pictures With A Single Imager And Microfluidic Lens, Chao Liu

Open Access Dissertations

Three-dimensional movie acquisition and corresponding depth data is commonly generated from multiple cameras and multiple views. This technology has high cost and large size which are limitations for medical devices, military surveillance and current consumer products such as small camcorders and cell phone movie cameras. This research result shows that a single imager, equipped with a fast-focus microfluidic lens, produces a highly accurate depth map. On test material, the depth is found to be an average Root Mean Squared Error (RMSE) of 3.543 gray level steps (1.38\%) accuracy compared to ranging data. The depth is inferred using a new Extended …

Exploring Spin-Transfer-Torque Devices And Memristors For Logic And Memory Applications, Zoha Pajouhi

Open Access Dissertations

As scaling CMOS devices is approaching its physical limits, researchers have begun exploring newer devices and architectures to replace CMOS.

Due to their non-volatility and high density, Spin Transfer Torque (STT) devices are among the most prominent candidates for logic and memory applications. In this research, we first considered a new logic style called All Spin Logic (ASL). Despite its advantages, ASL consumes a large amount of static power; thus, several optimizations can be performed to address this issue. We developed a systematic methodology to perform the optimizations to ensure stable operation of ASL.

Second, we investigated reliable design of …

Improving The Resilience Of Cyber-Physical Systems Under Strategic Adversaries, Paul Wood

Open Access Dissertations

Renewable energy resources challenge traditional energy system operations by substituting the stability and predictability of fossil fuel based generation with the unreliability and uncertainty of wind and solar power. Rising demand for green energy drives grid operators to integrate sensors, smart meters, and distributed control to compensate for this uncertainty and improve the operational efficiency of the grid. Real-time negotiations enable producers and consumers to adjust power loads during shortage periods, such as an unexpected outage or weather event, and to adapt to time-varying energy needs. While such systems improve grid performance, practical implementation challenges can derail the operation of …

Design And Implementation Of Benes/Clos On-Chip Interconnection Networks, Yikun Jiang

UNLV Theses, Dissertations, Professional Papers, and Capstones

Networks-on-Chip (NoCs) have emerged as the key on-chip communication architecture for multiprocessor systems-on-chip and chip multiprocessors. Single-hop non-blocking networks have the advantage of providing uniform latency and throughput, which is important for cachecoherent NoC systems. Existing work shows that Benes networks have much lower transistor count and smaller circuit area but longer delay than crossbars. To reduce the delay, we propose to design the Clos network built with larger size switches. Using less than half number of stages than the Benes network, the Clos network with 4x4 switches can significantly reduce the delay. This dissertation focuses on designing high performance …

Design, Fabrication And Testing Of Monolithic Low-Power Passive Sigma-Delta Analog-To-Digital Converters, Angsuman Roy

UNLV Theses, Dissertations, Professional Papers, and Capstones

Analog-to-digital converters are critically important in electronic systems. The

difficulty in meeting high performance parameters increases as integrated circuit design

process technologies advance into the deep nanometer region. Sigma-delta analog-todigital

converters are an attractive option to fulfill many data converter requirements.

These data converters offer high performance while relaxing requirements on the precision

of components within an integrated circuit. Despite this, the active integrators found within

sigma-delta analog-to-digital converters present two main challenges. These challenges are

the power consumption of the active amplifier and achieving gain-bandwidth necessary for

sigma-delta data converters in deep nanometer process technologies. Both of these

challenges …

A System For Monitoring And Managing Indoor Air Quality And Environmental Conditions, Ali Ibrahim

Boise State University Theses and Dissertations

The quality of indoor air depends on different types of pollutant sources existing in a semi-enclosed environment. The sources can be biological, chemical, or toxic pollutants. These sources can cause health issues and discomfort for occupants. One of the indicators of poor indoor air quality is Carbon Dioxide (CO₂). CO₂ can be used to indicate the indoor air exchange rate. The lack of air exchange means higher levels of CO₂. High levels of indoor particulates can also be an indication of poor air quality. Due to the lack of fresh air, air circulation, and air …

Cufa: A More Formal Definition For Digital Forensic Artifacts, Vikram S. Harichandran, Daniel Walnycky, Ibrahim Baggili, Frank Breitinger

Electrical & Computer Engineering and Computer Science Faculty Publications

The term “artifact” currently does not have a formal definition within the domain of cyber/ digital forensics, resulting in a lack of standardized reporting, linguistic understanding between professionals, and efficiency. In this paper we propose a new definition based on a survey we conducted, literature usage, prior definitions of the word itself, and similarities with archival science. This definition includes required fields that all artifacts must have and encompasses the notion of curation. Thus, we propose using a new term e curated forensic artifact (CuFA) e to address items which have been cleared for entry into a CuFA database (one …

Deleting Collected Digital Evidence By Exploiting A Widely Adopted Hardware Write Blocker, Christopher S. Meffert, Ibrahim Baggili, Frank Breitinger

Electrical & Computer Engineering and Computer Science Faculty Publications

In this primary work we call for the importance of integrating security testing into the process of testing digital forensic tools. We postulate that digital forensic tools are increasing in features (such as network imaging), becoming networkable, and are being proposed as forensic cloud services. This raises the need for testing the security of these tools, especially since digital evidence integrity is of paramount importance. At the time of conducting this work, little to no published anti-forensic research had focused on attacks against the forensic tools/process.We used the TD3, a popular, validated, touch screen disk duplicator and hardware write blocker …

Variable Response Of A Thermally Tuned Mems Pressure Sensor, Robert A. Lake, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

A typical microelectromechanical systems (MEMS) pressure sensor consists of a thin, deformable membrane and sensing element such as a piezoresistive element which is used to measure the amount of deflection in response to an applied pressure. Previous efforts demonstrated that buckled membranes, from silicon on insulator (SOI) wafers, can be thermally tuned via joule heating. By applying heat to the membrane through a resistive heating element, compressive stress is induced in the membrane causing it to buckle further out of plane and increasing its overall stiffness response. It is demonstrated that by increasing the stiffness of the membrane, the response …

Asynchronous Data Processing Platforms For Energy Efficiency, Performance, And Scalability, Liang Men

Graduate Theses and Dissertations

The global technology revolution is changing the integrated circuit industry from the one driven by performance to the one driven by energy, scalability and more-balanced design goals. Without clock-related issues, asynchronous circuits enable further design tradeoffs and in operation adaptive adjustments for energy efficiency. This dissertation work presents the design methodology of the asynchronous circuit using NULL Convention Logic (NCL) and multi-threshold CMOS techniques for energy efficiency and throughput optimization in digital signal processing circuits. Parallel homogeneous and heterogeneous platforms implementing adaptive dynamic voltage scaling (DVS) based on the observation of system fullness and workload prediction are developed for balanced …

Design Of Ferroelectric Mems Energy Harvesting Devices, Noah T. Blach, Robert A. Lake, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

Waste heat is a widely available but little used source of power. Converting a thermal gradient into electricity is conventionally done using the Seebeck effect, but devices that use this effect are naturally inefficient. An alternate approach uses microelectromechanical systems (MEMS) to generate movement and time-varying temperature from a constant temperature gradient. Ferroelectric materials can harvest electricity from moving structures and temperature variations. This concept was realized using traditional silicon microprocessing techniques. A silicon on insulator (SOI) wafer was backside Deep Reactive Ion Etched (DRIE) to form a one mm² by 7 micron thick silicon/silicon dioxide membrane. Lead zirconate …

Engineered Surfaces To Control Secondary Electron Emission For Multipactor Suppression, James M. Sattler, Ronald A. Coutu Jr., Robert A. Lake, Tod V. Laurvick

Electrical and Computer Engineering Faculty Research and Publications

A significant problem for space-based systems is multipactor - an avalanche of electrons caused by repeated secondary electron emission (SEE). The consequences of multipactor range from altering the operation of radio frequency (RF) devices to permanent device damage. Existing efforts to suppress multipactor rely heavily on limiting power levels below a multipactor threshold [1]. This research applies surface micromachining techniques to create porous surfaces to control the secondary electron yield (SEY) of a material for multipactor suppression. Surface characteristics of interest include pore aspect ratio and density. A discussion is provided on the advantage of using electroplating (vice etching) to …

Standardized Testing Of Non-Standard Photovoltaic Pavement Surfaces, John H. Nussbaum, Robert A. Lake, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

Emerging photovoltaic products have expanded the applications for the technologies into markets previously unconsidered for what was thought to be a delicate electronic product. One company leading this effort, Solar Roadways, Incorporated, is producing pavement replacing photovoltaic systems and proposing their use in everything from sidewalks to runways. Current pavement testing methods cannot be applied to these non-homogenous structures to identify if they can support the required loads. However, the standards called out specifically for pavements may be able to be translated to these products and their non-homogenous structures and non-standard materials to identify if they are able to perform …

Design And Analysis Of Novel Ge-Gete Pn Junction For Photovoltaics, Andrew M. Jones, Ronald A. Coutu Jr., Robert A. Lake

Electrical and Computer Engineering Faculty Research and Publications

The continuing rise in demand for energy places a similarly increasing demand to improve power production methods and efficiency. In regards to solar power generation, one major limiting factor with existing photovoltaic (PV) systems is the management of heat produced and photon interactions with the PV device. Typical devices operate within the 300-1000 nm range of the solar spectrum, greatly limiting the range of photons used for power generation. Furthermore, since infrared light (

Enhancing The Thermal Performance Of Temporary Fabric Structures For The Advanced Energy Efficient Shelter System, Justin E. Eshleman, Robert A. Lake, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

The focus of this research is to characterize the thermal load on temporary fabric shelters deployed in the Middle East in order to establish realistic contract specification for the thermal performance of future shelters. Three different testing methods were utilized to evaluate shelter thermal performance. Small-scale tests allowed for economical comparisons of different shelter materials and configurations.

Electrostrictive Polymers For Mechanical-To-Electrical Energy Harvesting, William G. Kaval, Ronald A. Coutu Jr., Robert A. Lake

Electrical and Computer Engineering Faculty Research and Publications

Research of electrostrictive polymers has generated new opportunities for harvesting energy from the surrounding environment and converting it into usable electrical energy. Piezoelectric ceramic based devices have long been used in energy harvesting for converting mechanical motion to electrical energy. Nevertheless, those materials tend to be unsuitable for low-frequency mechanical excitations such as human movement. Since organic polymers are typically softer and more flexible, the translated electrical energy output is considerably higher under the same mechanical force. Currently, investigations in using electroactive polymers for energy harvesting, and mechanical-to-electrical energy conversion, are beginning to show potential for this application. In this …