Computer Engineering Commons^™

Isopropyl Alcohol Pump For Printed Circuit Boards Using An Arduino, Lawrence Zhu

Computer Engineering

No abstract provided.

Electronic Deer Warning System, David Zhuo, Anlang Lu

Computer Engineering

Deer-vehicle collisions (DVCs) are extremely dangerous, often injuring or even killing drivers. Unfortunately, this form of automotive accident is commonplace in the United States. According to the NHTSA, DVCs result in 200 human deaths a year.2

Despite these deadly incidents, there currently are no deployed federal or state systems for preventing DVCs. There are many consumer electronic deer deterrent products, but their long-term effectiveness is questionable.3 In fact, there does not appear to be much research into electronic deer deterrent systems. Aside from constant audio output and electric shock, no other means of electronic deterrent exist. Even if fixed deterrents …

Vulnerability Analysis And Security Framework For Zigbee Communication In Iot, Charbel Azzi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Securing IoT (Internet of Things) systems in general, regardless of the communication technology used, has been the concern of many researchers and private companies. As for ZigBee security concerns, much research and many experiments have been conducted to better predict the nature of potential security threats. In this research we are addressing several ZigBee vulnerabilities by performing first hand experiments and attack simulations on ZigBee protocol. This will allow us to better understand the security issues surveyed and find ways to mitigate them. Based on the attack simulations performed and the survey conducted, we have developed a ZigBee IoT framework …

An Emg-Based Patient Monitoring System Using Zynq Soc Device, Farhad Fallahlalehzari

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis describes the design, development, and testing of an EMG-based patient monitoring system using the Zynq device. Zynq is a system on chip device designed by Xilinx which consists of an ARM dual cortex-A9 processor as well as an FPGA integrated into one chip. This work also analyzes the performance of image-processing algorithms on this system and compares that performance to more traditional PC-based systems. Image processing algorithms, such as Sobel edge detection, dilation and erosion, could be used in conjunction with a camera for the patient monitoring purposes. These algorithms often perform sub-optimally on processors because of their …

Psychophysiological Analysis Of A Pedagogical Agent And Robotic Peer For Individuals With Autism Spectrum Disorders., Mohammad Nasser Saadatzi

Electronic Theses and Dissertations

Autism spectrum disorder (ASD) is a neurodevelopmental disorder characterized by ongoing problems in social interaction and communication, and engagement in repetitive behaviors. According to Centers for Disease Control and Prevention, an estimated 1 in 68 children in the United States has ASD. Mounting evidence shows that many of these individuals display an interest in social interaction with computers and robots and, in general, feel comfortable spending time in such environments. It is known that the subtlety and unpredictability of people’s social behavior are intimidating and confusing for many individuals with ASD. Computerized learning environments and robots, however, prepare a predictable, …

Investigation Of Polymer–Plasticizer Blends As Sh-Saw Sensor Coatings For Detection Of Benzene In Water With High Sensitivity And Long-Term Stability, Pintu Adhikari, Laura Jeanne Alderson, Florian Bender, Antonio J. Ricco, Fabien Josse

Electrical and Computer Engineering Faculty Research and Publications

We report the first-ever direct detection of benzene in water at concentrations below 100 ppb (parts per billion) using acoustic wave (specifically, shear-horizontal surface acoustic wave, SH-SAW) sensors with plasticized polymer coatings. Two polymers and two plasticizers were studied as materials for sensor coatings. For each polymer–plasticizer combination, the influence of the mixing ratio of the blend on the sensitivity to benzene was measured and compared to commercially available polymers that were used for BTEX (benzene, toluene, ethylbenzene, and xylene) detection in previous work. After optimizing the coating parameters, the highest sensitivity and lowest detection limit for benzene were found …

Analog Spiking Neuromorphic Circuits And Systems For Brain- And Nanotechnology-Inspired Cognitive Computing, Xinyu Wu

Boise State University Theses and Dissertations

Human society is now facing grand challenges to satisfy the growing demand for computing power, at the same time, sustain energy consumption. By the end of CMOS technology scaling, innovations are required to tackle the challenges in a radically different way. Inspired by the emerging understanding of the computing occurring in a brain and nanotechnology-enabled biological plausible synaptic plasticity, neuromorphic computing architectures are being investigated. Such a neuromorphic chip that combines CMOS analog spiking neurons and nanoscale resistive random-access memory (RRAM) using as electronics synapses can provide massive neural network parallelism, high density and online learning capability, and hence, paves …

Overview Of Lte Spectrum Sharing Technologies, Yun Ye, Dalei Wu, Zhihui Shu, Yi Qian

Department of Electrical and Computer Engineering: Faculty Publications

Long-Term Evolution (LTE) communication systems feature advanced frequency reuse and interference coordination techniques providing faster and more secured mobile services. However, the network capacity in licensed spectrum is still behind market demands. Dynamic spectrum access or spectrum sharing in other frequently vacant or unlicensed frequency bands is considered an effective means to boost system throughput. Different from operations in licensed spectrum with exclusive access, LTE deployment needs to take into account the distinct regulations on channel access to each shared frequency band, in order to avoid interference to incumbent users, and to maintain fair play with peer operators in heterogeneous …

Smart Power Grid Synchronization With Fault Tolerant Nonlinear Estimation, Xin Wang, Edwin E. Yaz

Electrical and Computer Engineering Faculty Research and Publications

Effective real-time state estimation is essential for smart grid synchronization, as electricity demand continues to grow, and renewable energy resources increase their penetration into the grid. In order to provide a more reliable state estimation technique to address the problem of bad data in the PMU-based power synchronization, this paper presents a novel nonlinear estimation framework to dynamically track frequency, voltage magnitudes and phase angles. Instead of directly analyzing in abc coordinate frame, symmetrical component transformation is employed to separate the positive, negative, and zero sequence networks. Then, Clarke's transformation is used to transform the sequence networks into the αβ …

Saliency Ratio And Power Factor Of Ipm Motors Optimally Designed For High Efficiency And Low Cost Objectives, Peng Zhang, Dan M. Ionel, Nabeel Demerdash

Electrical and Computer Engineering Faculty Research and Publications

This paper uses formal mathematical optimization techniques based on parametric finite-element-based computationally efficient models and differential evolution algorithms. For constant-power applications, in the novel approach described, three concurrent objective functions are minimized: material cost, losses, in order to ensure high efficiency, and the difference between the rated and the characteristic current, aiming to achieve very high constant-power flux-weakening range. Only the first two objectives are considered for constant-torque applications. Two types of interior permanent magnet rotors in a single- and double-layer V-shaped configuration are considered, respectively. The stator has the typical two slots per pole and phase distributed winding configuration. …

Designing Laboratories For Small Scale Digital Device Forensics, Richard P. Mislan, Tim Wedge

Annual ADFSL Conference on Digital Forensics, Security and Law

The ubiquity of small scale digital devices (SSDD), the public’s ever increasing societal dependence on SSDD, and the continual presence of SSDD at all types of crime scenes, including non-technical and violent crimes, demand a formalized curriculum for the education and training of future cyber forensic examiners. This paper presents the various SSDD forensics labs currently in use and under development for future use at the Purdue University Cyber Forensics Laboratory. The primary objective of each module is to provide specific real-world cases for the learning, comprehension, and understanding of hands-on investigative techniques and methodologies. The purpose of this paper …

Network Forensic Investigation Of Internal Misuse/Crime In Saudi Arabia: A Hacking Case, Abdulrazaq Al-Murjan, Konstantinos Xynos

Annual ADFSL Conference on Digital Forensics, Security and Law

There are ad-hoc guidelines and a limited policy on computer incident response that does not include computer forensic preparation procedures (e.g. logging incidents). In addition, these guidelines do not consider the requirement of Islamic law for admissible evidence at an organisational level in Saudi Arabia. Network forensic investigation might breach the Saudi law if they follow ad-hoc or international digital forensic standards such as Association of Chief Police Officers (ACPO) guidelines. This might put the organisation in a costly situation when a malicious employee sues an Islamic court. This is because the law of Saudi Arabia is complying with Islamic …

Paper Session Ii: Computer Forensics Field Triage Process Model, Marcus K. Rogers, James Goldman, Rick Mislan, Timothy Wedge, Steve Debrota

Annual ADFSL Conference on Digital Forensics, Security and Law

With the proliferation of digital based evidence, the need for the timely identification, analysis and interpretation of digital evidence is becoming more crucial. In many investigations critical information is required while at the scene or within a short period of time - measured in hours as opposed to days. The traditional cyber forensics approach of seizing a system(s)/media, transporting it to the lab, making a forensic image(s), and then searching the entire system for potential evidence, is no longer appropriate in some circumstances. In cases such as child abductions, pedophiles, missing or exploited persons, time is of the essence. In …

Recognizing And Combating Cybercrime, Marcia L. Dority Baker

Information Technology Services: Publications

Can You Spot the Scam?

Scams make great stories. Tales of Internet crime or other fraud make up some of Hollywood's most exciting thrillers. While cybercrime blockbusters are fun to watch on the big screen, cybercrime is a serious problem on campuses globally.

How many people do you know who are the victim of a scam (Internet or phone)? According to the FBI, cybercrime is a growing threat that affects individuals and businesses around the world. A recent Washington Post article reported that cybercrime cost the global economy $445 billion in 2014.

The Wotan Beowulf Cluster Project, Carson Wang, Krist Pregracke

ASA Multidisciplinary Research Symposium

The Wotan project moves into its second year in which high school students, in liaison with SIU, have implemented Hadoop and various experiments. Insight on the challenges and requirements of current practices in Big Data analysis will be presented.

Development Of A National Repository Of Digital Forensic Intelligence, Mark Weiser, David P. Biros, Greg Mosier

Annual ADFSL Conference on Digital Forensics, Security and Law

Many people do all of their banking online, we and our children communicate with peers through computer systems, and there are many jobs that require near continuous interaction with computer systems. Criminals, however, are also “connected”, and our online interaction provides them a conduit into our information like never before. Our credit card numbers and other fiscal information are at risk, our children's personal information is exposed to the world, and our professional reputations are on the line.

The discipline of Digital Forensics in law enforcement agencies around the nation and world has grown to match the increased risk and …

Designing A Data Warehouse For Cyber Crimes, Il-Yeol Song, John D. Maguire, Ki Jung Lee, Namyoun Choi, Xiaohua Hu, Peter Chen

Annual ADFSL Conference on Digital Forensics, Security and Law

One of the greatest challenges facing modern society is the rising tide of cyber crimes. These crimes, since they rarely fit the model of conventional crimes, are difficult to investigate, hard to analyze, and difficult to prosecute. Collecting data in a unified framework is a mandatory step that will assist the investigator in sorting through the mountains of data. In this paper, we explore designing a dimensional model for a data warehouse that can be used in analyzing cyber crime data. We also present some interesting queries and the types of cyber crime analyses that can be performed based on …

Special Issue On Cyberharassment Investigation: Advances And Trends, Joanne Bryce, Virginia N. L. Franqueira, Andrew Marrington

Journal of Digital Forensics, Security and Law

Empirical and anecdotal evidence indicates that cyberharassment is more prevalent as the use of social media becomes increasingly widespread, making geography and physical proximity irrelevant. Cyberharassment can take different forms (e.g., cyberbullying, cyberstalking, cybertrolling), and be motivated by the objectives of inflicting distress, exercising control, impersonation, and defamation. Little is currently known about the modus operandi of offenders and their psychological characteristics. Investigation of these behaviours is particularly challenging because it involves digital evidence distributed across the devices of both alleged offenders and victims, as well as online service providers, sometimes over an extended period of time. This special issue …

The Impact Of Low Self-Control On Online Harassment: Interaction With Opportunity., Hyunin Baek, Michael M. Losavio, George E. Higgins

Journal of Digital Forensics, Security and Law

Developing Internet technology has increased the rates of youth online harassment. This study examines online harassment from adolescents with low self-control and the moderating effect of opportunity. The data used in this study were collected by the Korea Institute of Criminology in 2009. The total sample size was 1,091. The results indicated that low self-control, opportunity, and gender have a significant influence on online harassment. However, these results differed according to gender; for males, low self-control significantly impacted online harassment; for females, however, only low self-control significantly impacted online harassment. Furthermore, the interaction between low self-control and opportunity did not …

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

A Legal Examination Of Revenge Pornography And Cyber-Harassment, Thomas Lonardo, Tricia Martland, Doug White

Journal of Digital Forensics, Security and Law

This paper examines the current state of the statutes in the United States as they relate to cyber-harassment in the context of "revenge porn". Revenge porn refers to websites which cater to those wishing to exploit, harass, or otherwise antagonize their ex partners using pornographic images and videos which were obtained during their relationships. The paper provide examples and illustrations as well as a summary of current statute in the United States. The paper additionally explores some of the various legal remedies available to victims of revenge pornography.

Differentiating Cyberbullies And Internet Trolls By Personality Characteristics And Self-Esteem, Lauren A. Zezulka, Kathryn C. Seigfried-Spellar

Journal of Digital Forensics, Security and Law

Cyberbullying and internet trolling are both forms of online aggression or cyberharassment; however, research has yet to assess the prevalence of these behaviors in relationship to one another. In addition, the current study was the first to investigate whether individual differences and self-esteem discerned between self-reported cyberbullies and/or internet trolls (i.e., Never engaged in either, Cyberbully-only, Troll-only, Both Cyberbully and Troll). Of 308 respondents solicited from Mechanical Turk, 70 engaged in cyberbullying behaviors, 20 engaged in only trolling behaviors, 129 self-reported both behaviors, and 89 self-reported neither behavior. Results yielded low self-esteem, low conscientiousness, and low internal moral values for …

Toward Online Linguistic Surveillance Of Threatening Messages, Brian H. Spitzberg, Jean Mark Gawron

Journal of Digital Forensics, Security and Law

Threats are communicative acts, but it is not always obvious what they communicate or when they communicate imminent credible and serious risk. This paper proposes a research- and theory-based set of over 20 potential linguistic risk indicators that may discriminate credible from non-credible threats within online threat message corpora. Two prongs are proposed: (1) Using expert and layperson ratings to validate subjective scales in relation to annotated known risk messages, and (2) Using the resulting annotated corpora for automated machine learning with computational linguistic analyses to classify non-threats, false threats, and credible threats. Rating scales are proposed, existing threat corpora …

A Fault-Tolerant T-Type Multilevel Inverter Topology With Soft-Switching Capability Based On Si And Sic Hybrid Phase Legs, Jiangbiao He, Nathan Weise, Ramin Katebi, Lixiang Wei, Nabeel Demerdash

Electrical and Computer Engineering Faculty Research and Publications

The performance of a novel three-phase four-leg fault-tolerant T-Type inverter topology is presented in this paper, which significantly improves the inverter's fault-tolerant capability regarding device switch faults. In this new modular inverter topology, only the redundant leg is composed of Silicon Carbide (SiC) power devices and all other phase legs are constituted by Silicon (Si) devices. The addition of the redundant leg, not only provides fault-tolerant solution to switch faults that could occur in the T-Type inverter, but also can share load current with other phase legs. Moreover, quasi zero-voltage switching (ZVS) and zero-current switching (ZCS) in the Si Insulated-Gate …

An On-Line Diagnostic Method For Open-Circuit Switch Faults In Npc Multilevel Converters, Jiangbiao He, Nabeel Demerdash

Electrical and Computer Engineering Faculty Research and Publications

On-line condition monitoring is of paramount importance for multilevel converters used in safety-critical applications. A novel on-line diagnostic method for detecting open-circuit switch faults in neutral-point-clamped (NPC) multilevel converters is introduced in this paper. The principle of this method is based on monitoring the abnormal variation of the dc-bus neutral-point current in combination with the existing information on instantaneous switching states and phase currents. Advantages of this method include simpler implementation and faster detection speed compared to other existing diagnostic methods in the literature. In this method, only one additional current sensor is required for measuring the dc-bus neutral-point current, …

Mechanical Design And Optimization Of An Interactive Animatronic Bald Eagle, Eric Burns

Phi Kappa Phi Research Symposium (Archived)

Animatronics is a specialized sub-category of mechatronics, a fusion of mechanical and electrical engineering. The field has grown from small, individual projects into a major industry. As animatronics progress, mechanical engineers are pushed to design internal structures which occupy ever-decreasing spaces and to ensure designs can undergo maintenance and modifications smoothly. This research investigates methods of reducing space required for mechanisms and several other beneficial methods of development as well as varying satisfactions for audiences when exposed to actor-controlled systems rather than pre-scripted functions. The mechanical systems are designed using CAD software available at Georgia Southern. On-campus, resources are used …

Improving Gold/Gold Microcontact Performance And Reliability Under Low-Frequency Ac Through Circuit Loading, T. Laurvick, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

This paper investigates the performance and reliability of microcontacts under low-frequency and low-amplitude ac test conditions. Current microcontact theory is based on dc tests adapted to RF applications. To help better apply dc theory to RF applications, frequencies between 100 Hz to 100 kHz were experimentally investigated. Microcontacts designed to conduct performance and reliability measurements were used, which in prior dc testing typically lasted for 100 million cycles or more. Under ac loads, at similar power levels, eight devices were tested under cold-switching conditions, and only one was still operational at 10 million cycles. The effect of external circuitry on …

Thermal Management Using Mems Bimorph Cantilever Beams, Ronald A. Coutu Jr., R. S. Lafleur, J. P.K. Walton, Lavern A. Starman

Electrical and Computer Engineering Faculty Research and Publications

This paper examines a passive cooling technique using microelectromechanical systems (MEMS) for localized thermal management of electronic devices. The prototype was designed using analytic equations, simulated using finite element methods (FEM), and fabricated using the commercial PolyMUMPs™ process. The system consisted of an electronic device simulator (EDS) and MEMS bimorph cantilever beams (MBCB) array with beams lengths of 200, 250, and 300 μm that were tested to characterize deflection and thermal behavior. The specific beam lengths were chosen to actuate in response to heating associated with the EDS (i.e. the longest beams actuated first corresponding to the hottest portion of …

Generalizing Effective Spatial Bandwidth For Pole Location In Mas: The Elliptic Cylinder, James Richie

Electrical and Computer Engineering Faculty Research and Publications

The location of poles in the method of auxiliary sources for 2-D scatterers can be assisted using the effective spatial bandwidth (EBW) of the incident and scattered fields. Previously, only circular boundaries were considered. Here, EBW is extended to noncircular boundaries. Calculations presented for a cylinder with elliptical cross section verify EBW as an additional tool for pole placement for more general geometries.

Large-Scale Design Optimization Of Pm Machines Over A Target Operating Cycle, Alireza Fatemi, Nabeel Demerdash, Thomas W. Nehl, Dan M. Ionel

Electrical and Computer Engineering Faculty Research and Publications

A large-scale finite element model-based design optimization algorithm is developed for improving the drive-cycle efficiency of permanent magnet (PM) synchronous machines with wide operating ranges such as those used in traction propulsion motors. The load operating cycle is efficiently modeled by using a systematic k-means clustering method to identify the operating points representing the high-energy-throughput zones in the torque-speed plane. The machine performance is evaluated over these cyclic representative points using a recently introduced computationally efficient finite element analysis, which is upgraded to include both constant torque and field-weakening operations in the evaluation of the machine performance metrics. In contrast …