Civil Engineering Commons^™

A Review Of The Hl-93 Bridge Traffic Load Model Using An Extensive Wim Database, Cathal Leahy, Eugene J. Obrien, Bernard Enright, Donya Hajializadeh

Articles

HL-93, the current bridge traffic load model used in the United States, is examined here. Weigh-in-motion from 17 sites in 16 states, and containing 74 million truck records, is used to assess the level of consistency in the characteristic load effects implied by the HL-93 model. The load effects of bending moment and shear force are considered on single-lane and two-lane same-direction slab and girder bridges with a range of spans. It is found that the ratio of WIM-implied to HL-93 load effect varies considerably from one load effect to another. An alternative model is proposed which achieves improvements in …

Real Time Bridge Scour Monitoring With Magneto-Inductive Field Coupling, Andriy V. Radchenko, David Pommerenke, Genda Chen, Pratik Maheshwari, Satyajeet R. Shinde, Viswa Pilla, Y. Rosa Zheng

Electrical and Computer Engineering Faculty Research & Creative Works

Scour was responsible for most of the U.S. bridges that collapsed during the past 40 years. The maximum scour depth is the most critical parameter in bridge design and maintenance. Due to scouring and refilling of river-bed deposits, existing technologies face a challenge in measuring the maximum scour depth during a strong flood. In this study, a new methodology is proposed for real time scour monitoring of bridges. Smart Rocks with embedded electronics are deployed around the foundation of a bridge as field agents. With wireless communications, these sensors can send their position change information to a nearby mobile station. …

Reinforced Concrete Deterioration Of A 100 Year Old Structure In A Marine Environment, Ross O'Donovan

Theses

The current study investigates the deterioration of a 100 year old bridge located in a harsh marine environment. Constructed in 1908 - 1909 the Mizen Head Footbridge was one of the oldest reinforced concrete bridges in Ireland. The demolition of the bridge in 2009 provided a unique opportunity to examine its service life and to extract samples for analysis and investigation. A review of the construction of the bridge, and its maintenance history are presented, with a view to analysing their influence on the behaviour of the concrete.

Reinforcement corrosion due to chloride attack was identified. A focused study indicates …

The Potential For The Elimination Of Expansion Joints And Bridge Bearings From Existing Road Bridges In Ireland, Conor Keena

Theses

This research was focused on determining the feasibility of eliminating expansion joints and bridge bearings from existing short to medium span road bridges in Ireland. It is possible that this could provide a significant long-term economic benefit to bridge owners. A literature review was carried out as part of the research. This included investigations into research conducted in the areas of thermal movements of bridges, concrete creep and shrinkage, soil-structure interaction, lifetime costing, design standards and finite element analysis, and the elimination of bridge expansion joints in other countries.

Finite element analyses were carried out on two existing road bridges. …

An Investigation Into The Potential Of Increasing The Span Of Solid Slab Deck Bridges, Eamonn Kiernan

Theses

Solid slab deck bridges are a common type of structure employed for short to medium span bridges. They may be of rapid build nature if they are made up of prestressed precast sections with concrete infill deck.

The aim of this research was to investigate the potential to increase the span of solid slab deck bridges by the employment of high strength concrete (HSC), lightweight aggregate concrete (LWAC) and the use of a voided deck.

The analysis undertaken in the research was based on a bridge, which was recently constructed in Cork; the bridge was constructed using MY beam sections, …

Review Of Load Rating And Posting Procedures And Requirements, Raymond Neal Chou

Open Access Theses

All states are required to load rate and post bridges in order to comply with federal standards. Load ratings are performed in order to determine the safe live load capacity of a bridge, considering the existing conditions of the bridge. Based on the load ratings, the bridge is evaluated for load posting or strengthening. The Indiana Department of Transportation (INDOT) was notified that their practice for load rating and posting did not satisfy 23 CFR 650.313, which states that bridges shall be load rated and posted according to an American Association of State Highway and Transportation Officials (AASHTO) manual. The …

Probabilistic Analysis Of Indeterminate Highway Bridges Considering Material Nonlinearity, Liam Mccarthy

Masters

With ever-reducing maintenance budgets and ever-deteriorating bridge infrastructure, th assessment of existing bridges is vital. Reliability analysis techniques are becomin increasingly popular in the structural safety assessment of existing bridge structures Commonly, a component based approach is used in reliability analysis techniques Traditional reliability procedures often employ a conservative definition of failure, in that th component is deemed to have failed when the strength capacity has been exceeded at a singl cross section. As a result, the component's degree of redundancy and ductility is ignored giving an often conservative estimate of the load carrying capacity of the bridge component Therefore, …

Developing A Family Of Curves For The Hec-18 Scour Equation, Timothy Calappi, Carol J. Miller, Donald Carpenter, Travis Dahl

Civil and Environmental Engineering Faculty Research Publications

Accurate pier scour predictions are essential to the safe and efficient design of bridge crossings. Current practice uses empirical formulas largely derived from laboratory experiments to predict local scour depth around single-bridge piers. The resulting formulas are hindered by insufficient consideration of scaling effects and hydrodynamic forces. When applied to full-scale designs, these formula deficiencies lead to excessive over prediction of scour depths and increased construction costs. In an effort to improve the predictive capabilities of the HEC-18 scour model, this work uses field-scale data and nonlinear regression to develop a family of equations optimized for various non-cohesive soil conditions. …

Resilience Of Bridges Following Aftershocks, Diego Francisco Espinosa

Electronic Theses and Dissertations

The ability to predict the reduction in capacity of a structure after an earthquake is vital in the process of assessing a structure after a main-shock or an after-shock. Main-shocks are normally followed by a few aftershocks in a short period of time. Researchers in the past have focused for the most part on the effects of main-shocks on buildings. Very little research has been performed on the ability to predict the reduction in capacity of bridges in aftershocks. This thesis focuses on providing a way of assessing the reduction in capacity for main-shocks as compared to aftershocks and the …

Temporal Pier Scour Evolution Under Stepped Hydrographs, Mark Schillinger

All Theses

The present study was aimed at measuring the scour hole profile at bridge piers under clear water scour. Scour tests were performed under both steady state flow and under stepped hydrographs. Multiple smaller flood events were run to determine how flood history affects scour hole development. Various equilibrium scour depth equations and proposed temporal scour models were compared. The similarity of the scour hole profiles with time and flow history were evaluated.
Experiments were conducted in a 14.8 m long, 1.19 m wide, 1.22 m deep rectangular flume with a model bridge pier. A uniform sediment bed (d₅₀= …

Wim Based Load Models For Bridge Serviceability Limit States, Przemyslaw Rakoczy

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The safety of aging bridge inventory is one of the main concerns of the state and federal agencies. Therefore, there is a need to quantify the safety margin of existing infrastructure and new design bridges. The Serviceability Limit States, i.e. fatigue, requires additional statistical parameters and not only the maximum values but also load spectra, i.e. frequency of occurrence of loads. The maximum values are needed for shorter time periods, such as day, week, month or year. Load spectra as well as material resistance are random variables. To quantify the safety margin of existing and future bridges load and resistance …

Analytical Seismic Fragility Curves For Skewed Multi-Span Steel Girder Bridges, Ian Sullivan

All Theses

Most of the past seismic fragility studies on typical highway bridges in the Central and Southeastern United States (CSUS) have focused on regular multi-span bridges with little to no skew. However, past earthquakes and studies have shown that skewed multi-span simply supported bridges may also be susceptible to earthquake damage, specifically causing coupled responses (longitudinal and transverse) that place more demand on individual components. With over 27 percent of simply supported steel girder highway bridges in the CSUS having a skew angle over 15 degrees, there is a specific need to further quantify the vulnerability of such bridges exposed to …

A Truck-Mounted Scour Inspection System For Indot, Dennis Lyn, Thomas Cooper, Ranadeep Das

JTRP Technical Reports

Scour monitoring may be a useful tool for INDOT in dealing with local scour problems at bridge sites, and a truck-mounted scour-monitoring system is an attractive option offering flexibility in deployment and cost-effectiveness. This report deals with two aspects related to the further development of such a system: i) a web application that combines the latest available information regarding streamflow with relevant information regarding bridges considered susceptible to bridge scour, thereby assisting in truck-deployment decisions, and ii) development of an acoustic positioning system as a replacement of the original mechanical positioning in order to improve the ease of use.

The …

Transfer And Development Length Of Strands In Post-Tensioned Members After Anchor Head Failure, Elie El Zghayar

Electronic Theses and Dissertations

Post-tensioning tendons in segmental bridge construction are often only anchored within the deviator and pier segments. The effectiveness of the post-tensioning (PT) system is therefore dependent on proper functioning of the anchorages. On August 28, 2000 a routine inspection of the Mid-Bay Bridge (Okaloosa County, Florida) revealed corrosion in numerous PT tendons. Moreover, one of the 19-strand tendons was completely slacked, with later inspection revealing a corrosion-induced failure at the pier anchor location. Anchorage failure caused all PT force to transfer to the steel duct located within the pier segment that in turn slipped and caused the tendon to go …

Verification Of Lrfd Bridge Design And Analysis Software For Indot, Amit H. Varma, Jungil Seo

JTRP Technical Reports

NCHRP Process 12-50 was implemented to evaluate and verify composite steel I-girder bridge design software used commonly in Indiana. A test-bed of twenty one bridges was developed with the guidance from an Indiana Department of Transportation appointed research advisory panel (RAP). The test-bed included five simple-span and sixteen multi-span bridge superstructures. More than 80 parameters were required to define a bridge and they include bridge span, girder spacing, number of beams, section type, steel strength, girder sections, and other required bridge parameters. Some of these parameters were initially selected by INDOT and practitioners.

An indigenous computer program PURDUE CSBD was …

Behavior Of Prestressed Concrete Bridge Girders, Franklin B. Angomas

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

For this research, prestress losses were monitored in six HPC bridge girders. These measured losses were compared to predicted losses according to four sources. Prestress loss predictive methods considered for this research were: 1- AASHTO LRFD 2004, 2- AASHTO LRFD 2004 Refined, 3- AASHTO LRFD 2007, and 4- AASHTO LRFD Lump Sum method. On the other hand, the camber prediction methods used in the present research were: 1- Time dependent method described in NCHRP Report 496, 2- PCI multiplier method, and 3- Improved PCI Multiplier method. For the purpose of this research, long-term prestress losses were monitored in select girders …

Response Sensitivity Of Highway Bridges To Random Multi-Component Earthquake Excitation, Kyle Cronin

Electronic Theses and Dissertations

Highway bridges provide a critical lifeline during extreme seismic events and must maintain serviceability under a large range of earthquake intensities. Consequently, the advent of more computational power has allowed more advanced analysis approaches for predicting performance and vulnerability of highway bridges under these seismic loads. In traditional two-dimensional finite element analyses, it has been demonstrated that the incidence angle of the ground motion can play a significant role in structural response. As three-dimensional nonlinear time history analyses are used more frequently in practice, ground motions are still usually applied along a single bridge axis. It is unknown how three …

Estimation Of Earthquake Loss Due To Bridge Damage In The St. Louis Metropolitan Area: Part I - Direct Losses, Ronaldo Luna, David J. Hoffman, William T. Lawrence

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The risk associated with earthquake hazards on highway systems is dependent on the complexity of a network and its redundancy in providing traffic flow. Earthquake loss estimation studies can provide decision makers with an appreciation of the importance of having a highway network resistant to earthquakes and information to make the network resistant to these events. The direct economic loss was estimated for a major metropolitan area, St. Louis, for a series of earthquake scenarios. The primary component of the study was damage to bridges within the highway system. The study zone covers the St. Louis metropolitan area and its …

Implications Of Future Heavier Trucks For Europe's Bridges, Colin C. Caprani, Bernard Enright, Eugene O'Brien

Conference papers

European road freight transport has increased by 38% between 1995 and 2005 and this strong growth trajectory seems likely to continue into the future. To address this growth without compromising the competitativeness of European transport, some countries are contemplating the introduction of longer and heavier trucks, with up to 8 axles and gross weights of up to 60 t. This has the advantage of reducing the number of vehicles for a given volume or mass of freights, reducing labour, fuel and other costs. However, many roads authorities are concerned about the implications for Europe's bridge infrastructure. For bridge loading, it …

Estimation Of Earthquake Loss Due To Bridge Damage In The St. Louis Metropolitan Area. Ii: Indirect Losses, David Lee Enke, Chakkaphan Tirasirichai, Ronaldo Luna

Engineering Management and Systems Engineering Faculty Research & Creative Works

An approach to estimate the indirect economic loss due to damaged bridges within the highway system from an earthquake event is presented. The indirect cost considered refers to the increased highway transportation cost only. The study zone covers the St. Louis metropolitan area and its surrounding suburban regions. An earthquake scenario centered in St. Louis, with a magnitude 7.0 is used. The direct earthquake loss was primarily damage to bridges, which causes an increase in travel time and distance within the transportation network. This information is then used as input for the indirect loss model. The indirect loss is examined …

Seismic Fragility Curves For A Typical Highway Bridge In Charleston, Sc Considering Soil-Structure Interaction And Liquefaction Effects, Matthew Bowers

All Theses

Evidence from historical earthquakes suggests that the vulnerability of highway bridges is significantly affected by large permanent ground deformations caused by liquefaction as well as soil-structure interaction (SSI). The vulnerability of a typical multi-span simply-supported (MSSS) concrete girder bridge found in Charleston, South Carolina, is evaluated with consideration for liquefaction and SSI effects. In general, existing bridges in this region were not originally designed with consideration for seismic events or liquefaction of underlying soils. Fragility curves that represent the probability of exceeding predefined performance levels of damage given an earthquake of a particular intensity are used to evaluate the effects …

Structural And Economical Impacts Of Heavy Truck Loads On Bridges, Xiang Zhou

Doctoral Dissertations

The study included in this dissertation assesses the strength, serviceability, and economic impact of overweight trucks on Louisiana bridges. Truck load configurations FHWA 3S2 and FHWA 3S3 were applied to bridge models that were originally designed for HS20-44 truck configuration to determine the effects of heavy truck loads on bridges. Behaviors of bridge components including bridge girder, deck, and diaphragm were evaluated separately.

AASHTO linear approach and finite element analysis were employed to evaluate bridge girder behaviors under the heavy truck load. Bridge models with different geometric configurations were considered. Both short term and long term effects on simple span …

Intelligent Painting Process Planner For Robotic Bridge Painting, Yong Bai

Civil and Environmental Engineering Faculty Research and Publications

Due to increased government regulations on environment, health, and safety, the cost of on-site bridge painting has quadrupled over the past several years. The construction industry faces a great challenge in how to control the increased costs of bridge painting and meet the regulations at the same time. A possible solution to address this challenge is to develop a robotic bridge painting system. The development of the robotic system can be justified by the potential improvements in safety and productivity. This paper presents the development and testing of an Intelligent Painting Process Planner. The Planner, built based on bridge feature …

Enhancing The Capability Of Rapid Bridge Replacement After Extreme Events, Yong Bai, Seong Hoon Kim, William R. Burkett

Civil and Environmental Engineering Faculty Research and Publications

Purpose

The potential threats of extreme events to highway bridges have received increased attention from government agencies, the engineering and construction communities, and the traveling public. These events include terrorist attacks as well as human‐induced and natural hazards such as earthquakes, explosions, fires, floods, and hurricanes. To respond to the potential threats on highway bridges, a research project was conducted to identify rapid bridge replacement processes, techniques, and needs for improvements.

Design/methodology/approach

To achieve the research objectives, a detailed case study of previous bridge replacement following an extreme event was conducted. The case study was performed using a three‐step approach. …

Factors In Debris Accumulation At Bridge Piers, Dennis A. Lyn, Thomas J. Cooper, Charles Anthony Condon, Lu Gan

JTRP Technical Reports

Debris accumulation at bridge piers has been a significant problem at a number of bridge sites in Indiana, increasing risks of upstream flooding, scour, and stream instability. The current study aimed at identifying factors contributing to debris accumulation in order to formulate guidelines for the design of new bridges that would minimize their occurrence or impact. Three related approaches were taken: i) a systematic study of the available underwater bridge inspections reports, ii) a program of periodic visits and visual examination of bridge sites that were thought to be prone to debris accumulation, and iii) continued video monitoring of three …

Synthesis Study: Heat Treatment And Its Effects On Rehabilitating Steel Bridges In Indiana, Matthew Lackowski, Amit Varma

JTRP Technical Reports

The literature review of prior heat straightening research indicated that significant research has been conducted on the development of: (i) heat straightening repair techniques and their field implementation, (ii) guidelines and recommendations for heat straightening repair, (iii) empirical procedures for estimating plastic rotations achieved during heat straightening, (iv) empirical procedures for predicting residual stresses caused by heat straightening, and (v) the effects of heat straightening on the structural properties of repaired bridges. Currently, there is a need for additional research on: (a) the fatigue performance of heat straightened beams, (ii) the effects of single and multiple heat straightening on the …

Rapid Bridge Replacement: Processes, Techniques, And Needs For Improvements, Yong Bai, William R. Burkett

Civil and Environmental Engineering Faculty Research and Publications

The terrorist attack on September 11, 2001 and subsequent potential threats to the United States transportation systems have presented an urgent need to develop emergency response plans in order to quickly react to the possible consequences of an extreme event. Highway bridges, as critical components of the nation’s transportation network, have received increased attention. To respond to the potential threats on highway bridges, a research project was conducted to identify rapid bridge replacement processes, techniques, and needs for improvements. To achieve the research objectives, the research team studied three cases of previous bridge replacements following extreme events. By studying these …

Study Of Same-Lane And Inter-Lane Gvw Correlation, Colin C. Caprani, Bernard Enright, E. J. O'Brien

Conference papers

Extensive work has been done over the last two decades on the simulation of traffic loading on bridges. The methodology used is to generate a number of years of simulated traffic and to use extreme value statistics to predict more accurately the characteristic loading for a given bridge. The parameters and probability distributions used in the Monte Carlo simulation must be based on observed sample traffic data. Some previous studies have made unsubstantiated assumptions regarding correlation between the Gross Vehicle Weights (GVW) of trucks in the same lane, or between trucks in adjacent, same direction lanes. For this paper, an …

Lessons Learned From An Emergency Bridge Replacement Project, Yong Bai, William R. Burkett, Phillip T. Nash

Civil and Environmental Engineering Faculty Research and Publications

The terrorist attack on September 11, 2001, and subsequent potential threats to U.S. transportation systems have presented an urgent need to develop emergency response plans to quickly react to the possible consequences of extreme events. Extreme events include terrorist attack as well as man-made and natural disasters such as explosions, fires, floods, and earthquakes. The objective of this research was to identify strategies and technologies to quickly restore the use of highway bridges, a critical component of the nation’s transportation network, in case they are damaged or destroyed by extreme events. One of the tasks associated with this research was …

Liquefaction Effects On Lateral Pile Behavior For Bridges, Wei Zheng, Ronaldo Luna

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A coupled pile-soil-structure interaction (SPSI) analysis method is presented to study the liquefaction effects on lateral pile behavior of the highway bridges. Pile-soil interaction is simulated by the dynamic nonlinear p-y method including the effect of liquefaction. The liquefaction effects to the pile-soil interaction are taken into account by introducing a degradation multiplier to the p-y curve. The degradation multiplier is related to the excess pore water pressure buildup at the pile-soil interface. The SPSI analysis method is implemented into a Missouri highway bridge site near the New Madrid Seismic Zone (NMSZ) rift complex for future earthquake scenarios of Mw …