Civil Engineering Commons^™

Development Of A New Seismic Metamaterial For Passive Vibration Control Of Civil Structures, Shayan Khosravi

Theses and Dissertations

Seismic metamaterials are engineered structures that control mechanical wave propagation through frequency bandgaps, making them useful for structural control and seismic hazard mitigation. This study introduces the Passive Friction Seismic Metamaterial Base Isolation (PFSMBI) system, which combines frequency bandgaps and solid friction energy dissipation to improve the seismic performance of civil structures. The PFSMBI consists of a lattice structure with identical cells connected by springs and dampers, shifting a building’s natural frequency away from earthquake excitations. A dynamic model analyzes the system’s absolute acceleration, drift responses, and base shear force, optimizing parameters such as frequency ratios, mass ratios, and the …

Use Of Pushed-In Pencel Pressuremeter Test For Shallow Foundation Design In Florida Fine Sands, Brhane Weldeanenya Ygzaw

Theses and Dissertations

A comprehensive evaluation was conducted on the performance, consistency, and practical application of various in-situ geotechnical testing methods for predicting the settlement and bearing capacity of shallow foundations in Florida’s fine sands. The methods assessed include the Standard Penetration Test (SPT), Cone Penetration Test (CPT), Dilatometer Test (DMT), pushed-in PENCEL Pressuremeter Test (PPMT), and the pre-bored TEXAM Pressuremeter Test. A dual approach controlled indoor testing at the FDOT State Materials Office (SMO) and field investigations at three representative sites (Kingsley, Trenton, and the UCF research site), formed the experimental foundation.

Over thirty settlement prediction techniques and thirteen bearing capacity estimation …

Investigation Of Shear Modulus And Material Damping Of A Lightly Cemented Silty Sand Representing Offshore Soil, Joshua Jeanjaquet

Theses and Dissertations

Offshore structures remain highly relevant, making the dynamic characterization of offshore soils critical. Since many offshore soils are cemented, understanding their response to dynamic loads is essential for developing accurate models that improve the reliability and cost-effectiveness of offshore structure designs. This study examines the impact of cement content on shear modulus, shear modulus reduction, shear wave velocity, and material damping of lightly cemented fine silty sand. A series of Resonant Column and Torsional Shear tests were conducted. The results were analyzed and compared to existing literature. The modified hyperbolic model was proposed to characterize the shear modulus and damping …

Investigating The Influence Of Volumetric Water Content In The Upper Layer Of Soil On Embankment Factor Of Safety, Kiera Rose Hughes

Theses and Dissertations

Geohazards, including landslides and embankment failures, pose significant risks to railway infrastructure, necessitating early recognition methods for effective risk mitigation. This research explores the relationship between the volumetric water content in the upper soil layer and the embankment's factor of safety (FOS) to improve early detection and stability assessment. A parametric analysis was conducted to evaluate how variations in the soil type (shear strength and hydraulic conductivity), slope geometry (angle and height) and recharge conditions (rainfall intensity and duration) affect the FOS. Using the GeoStudio software, seepage and slope stability analyses were performed for two baseline soils, as well as …

Comparison Of A Terrestrial And Handheld 3d Laser Scanner In As-Built Building Information Model (Bim) Creation, Cedric Scott Jankowski

Theses and Dissertations

Advances in computer processing have allowed mobile 3D laser scanners to begin to rival terrestrial scanners in terms of accuracy and scanning speed. While terrestrial scanners are the established instrument used in BIM creation for existing buildings, their cost, immobility, and size warrants a comparison to mobile scanners. This evaluation used scans created with both scanner types, the resulting point clouds, and 3D models created by tracing these point clouds to compare the BIM models and resulting floorplans, which were checked against direct on-site measurements. Because terrestrial scanners are considered state-of-the-art, the evaluation focused primarily on comparing mobile scanner and …

Evaluating Educational Benefits Of A Custom Cyber Game: ‘Hvac Attack!’, Jillian S. Valente

Theses and Dissertations

Cyber competition and conflict remain an enduring concern for the Department of Defense (DoD). Positive control of cyberspace is crucial across the vast diversity of military operations and supporting activities. Military members play an important role in cyber prevention, detection, and remediation, but most receive relatively little training outside of the annual Cyber Awareness Challenge. Particular career fields within the DoD may benefit from specialized training in cybersecurity, in particular the civil engineering (CE) community supporting critical infrastructure protection. Prior research has suggested that game-based learning (GBL) can be beneficial for teaching cyber concepts.

Numerical Analyses Of Construction Materials At Different Scales For Improved Resilience And Sustainability Of Civil Infrastructures, Chenchen Huang

Theses and Dissertations

The resilience and sustainability of civil infrastructure are fundamental to supporting modern society in the face of growing environmental challenges and resource limitations. This study aims to use multi-scale numerical tools to evaluate mechanical performance of different construction materials under various environmental and loading conditions. Firstly, we adopt the discrete element method (DEM) to evaluate the influence of freeze-thaw cycles (FTCs) action on the mechanical properties of rock from the micro perspective. A simplified plastic model is proposed to capture the residual deformation produced during FTCs. To further explore the deterioration of FTCs on rock, the water-contained grain-based model (GBM) …

Performance Assessment Of Fiber-Reinforced Asphalt Mixtures: A Comprehensive Laboratory And Full-Scale Investigation, Ali Raza Raza Khan

Theses and Dissertations

Asphalt concrete is a composite material widely used in the construction of roads; however, fatigue cracking (load associated), thermal cracking (non-load associated), and permanent deformation (or rutting) are the most challenging issues in flexible (or asphalt) pavement structures. These distresses affect ride quality and are considered the most well-known pavement deterioration types. Several modifiers have been used as potential solutions to cracking and rutting of asphalt mixtures (i.e., polymers, geogrids etc.). Among these modifiers, fibers were introduced to improve the resistance of asphalt mixtures to rutting and cracking. Addition of fibers into the asphalt mixture is always challenging because of …

Centralized Deep Reinforcement Learning For Homogeneous Multi-Component Maintenance Optimization, Joseph W. Wittrock

Theses and Dissertations

This thesis explores an application of reinforcement learning (RL) in maintenance optimization. Recent advances in hardware-accelerated computation and deep learning have made RL a powerful tool for solving optimization problems which are too complex for traditional methods. Maintenance optimization involves improving the efficiency and effectiveness of maintenance activities through data-driven approaches, ultimately reducing costs and increasing asset availability. Making informed maintenance decisions is crucial to long-term sustainability.

A desirable maintenance policy maximizes a utility signal while minimizing the cost of maintenance. Techniques in sequential decision making such as dynamic programming (DP) and RL have found success in optimizing these maintenance …

Hydronic Parking Lots: A Solution For Urban Heat Island Mitigation, Sumeet Jinnappa Paramaj

Theses and Dissertations

The Urban Heat Island (UHI) effect has emerged as a critical challenge in modern cities. It contributes to elevated local temperatures, placing significant stress on urban ecosystems and public health. One of the primary drivers of this phenomenon is the widespread use of impervious surfaces, such as dark-colored parking lots, which absorb heat during the day and gradually release it at night. This ongoing cycle results in persistently warmer urban environments. As cities continue to expand and densify, the need for effective, sustainable strategies to reduce urban heat becomes increasingly urgent.

This project aims to explore innovative interventions, particularly in …

Metakaolin-Based Geopolymer Concrete; Synthesis, Development And Characterization, Heba Fouad

Theses and Dissertations

Geopolymers are rendered as an essential sustainable replacement to the widely used Ordinary Portland Cement (OPC) which causes immense carbon dioxide emissions, hence a detrimental impact on society’s health and the environment. Geopolymers are three-dimensional networks of polymerized tetrahedral silicate and aluminate in the form of Q4(4Al), Q4(3Al) and Q4(2Al) which act as the principal binding phase in concrete. Past research has reported the synthesis of geopolymers from different aluminosilicates precursors, their characterization, and their wide range properties. However, previous studies still have not properly investigated effective range of synthesis ratios for a particular source material, optimum curing regimes, short- …

Experimental Insights Into Friction Losses Of Post-Tensioned Precast Full-Scale Girders, Mostafa Serry

Theses and Dissertations

The use of post-tensioning in construction has revolutionized the construction industry and made way for several construction and structural applications that were unattainable before. One of the most important topics that are synonymous with the use of post-tensioning is the matter of accurately calculating the short-term and long-term losses that arise in pre-stress. One of the prominent types of losses is the friction losses that occur during the jacking of the concrete elements due to its impact on structural integrity and longevity.

The thesis examines this critical aspect of friction losses in post-tensioned concrete structures. The study focuses on full-scale, …

Enhancing Concrete Sustainability With Self-Healing Technologies, Al Shimaa Abdullatif

Theses and Dissertations

Thanks to its strength, durability and affordability, Portland cement concrete is the most commonly used building material worldwide. However, concrete cracking is inevitable due to numerous factors including shrinkage, exposure to external chemicals, internals reactions, excessive loads, to name but a few. Self-healing is a promising technique that can enable concrete to autogenously heal cracks and alleviate much of the damage. Such healing can without a doubt extend the service life with less need for external repair works therefore it contributes to sustainability. Over the years, several means of self-healing agents have been explored including bio-based procedures and the incorporation …

Assessing Plate Load Testing And Modulus Of Subgrade Reaction Determination For Pavements, Jami Lynn Rushing

Theses and Dissertations

This thesis aims to: 1) determine the effect of plate size on the modulus of subgrade reaction (k), 2) investigate the differences between the ASTM D1196-21 and CRD-C 655-95 plate load test methods, and 3) develop new effective k curves. 150 plate load tests were executed on three subgrade materials under varying base course thicknesses. Plate load testing was designed to evaluate various plate sizes and testing standards (e.g., the military standard – CRD-C 655-96 and the ASTM standard – ASTM D1196-21). By performing plate load tests on varying base course thicknesses, newly developed effective k curves were developed from …

The Plastics Crisis: Responsible Recycling In Civil Engineering And Infrastructure, Jason Howell Stewart

Theses and Dissertations

A global plastics crisis exists with around 400 million metric tons (MMT) of plastics production and 350 MMT of plastics waste generated annually around the globe. Plastics are durable and essentially non-biodegradable, so they accumulate in both terrestrial and marine environments as pollution and within landfills without breaking down over time. Plastics are ubiquitous in 21st-century society and culture, comprising essential elements in most industries including packaging, transportation, electrical/electronics, and building/construction. The role of civil engineering and infrastructure in addressing the plastics crisis was specifically explored. Responsible plastics recycling yields products with improved engineering properties, performance characteristics, marketability, and/or manufacturing …

A Case Against Exclusive Reliance On Volumetric Mixture Characterization For Future Asphalt Pavements And The Advancement Of A Viable Alternative, Jonathan Randy Easterling

Theses and Dissertations

Volumetric properties have been the cornerstone of asphalt mixture design and control dating back to the early 20th century. However, social and economic drivers have caused the asphalt industry to make changes in materials and processes used to produce mixtures that have stretched the limits of volumetric centric methodologies. The primary objectives of this dissertation were to present an extensive case on how volumetrics is limited in their ability to characterize asphalt mixtures and to advance the body of knowledge of a viable alternative. State agency specifications were examined and found that Departments of Transportation (DOTs) were using asphalt volumetric …

Physics-Based And Data-Driven Constitutive Modeling Of Unsaturated Soils Under Multi-Physics Loading Conditions, Mohsen Ajdari

Theses and Dissertations

Understanding the behavior of unsaturated soils under multi-physics loading is crucial for addressing several challenges related to emerging geo-energy technologies, climate change, and geohazard mitigation. The main objective of this research is to enhance the state of the art for modeling unsaturated soils under multi-physics loading conditions through physics-based and data-driven approaches. Toward this objective, this dissertation is divided into two distinct yet interrelated parts. In the first part (Chapters 2, 3, and 4), thermodynamic principles are employed to develop new constitutive functions to describe soil suction and stress-dilatancy of unsaturated soils under temperature-dependent conditions. Building upon the insights gained …

Integrating Gis And Ca-Markov Model To Study Urban Dynamics Of Salem, India In Terms Of Pattern, Intensity And Direction, Linda Theres B

Theses and Dissertations

Urban populations have grown substantially in the modern era and the information age as people seek better living prospects. Currently, more than half of the world's population resides in the cities. Such growth must be monitored to ensure that people enjoy the boons of urban spaces, not the banes. Recognising the significance of urban studies, several researchers have attempted to analyse and predict urban dynamics using remote sensing, Geographic Information Systems, and machine learning methods. However, certain limitations exist, especially in improving the CAMarkov model's prediction performance. In addition, studies have suggested that growth characteristics, such as pattern, intensity, and …

Evaluation Of Bridge Deterioration Factors: From Design Parameters To Community Impact., Lawrencia Akuffo

Theses and Dissertations

The structural health and economic variables influencing the state of bridges in New Jersey are thoroughly examined in this thesis. The predictive modeling of bridge conditions using stepwise selection and linear logistic regression approaches is the primary focus of the opening chapter. With its precise predictions about bridge condition, either being fair/good, our model offers insightful information about resource allocation and maintenance by identifying bridge features which affect the deterioration of bridges the most. This gives effective infrastructure management, which not only relies on the identification of the important predictors and their effects on bridge conditions but also ranks them …

Characterizing Mechanical Behaviors Of Railroad Ballast Based On Large-Scale Triaxial Tests, Shihao Huang

Theses and Dissertations

Ballast, typically composed of large unbound aggregates with uniform gradation, is essential for the structural integrity of railroad tracks, facilitating load transfer, drainage, and ensuring stability and resilience. The mechanical behaviors of ballast, including shear resistance, resilient modulus, and permanent deformation, are critical for effective railroad design and maintenance, directly impacting track geometry. Degradation of these mechanical properties can lead to significant track-related issues, such as excessive settlement and train derailments, resulting in substantial property damage, injuries, and fatalities. This dissertation aims to characterize mechanical behaviors of railroad ballast from perspectives of aggregate interaction, cyclic loading pulses and climatic conditions, …

Evaluation Of Settlement In Poorly Graded Sand With Gravel Under Strain-Controlled Cyclic Triaxial And Dynamic Centrifuge Model Testing Conditions, Elise Jones

Theses and Dissertations

This research evaluates the dynamic behavior and volume change of sand with gravel subjected to cyclic loading. Historically, research on the dynamic behavior of cohesionless soils has primarily focused on the study of liquefaction due to its known implications on soil shear strength loss. Gravelly soil is generally assumed to be less susceptible to liquefaction since its large particle size facilitates drainage during cyclic loading. Gravel’s particle size also makes it difficult to test using standard cyclic shearing laboratory equipment. Thus, there is a lack of widespread research and predictive methods for the dynamic behavior of gravelly soil. Determining the …

Tracking Deposition And Settling Characteristics Of Airborne Metallic Particulate, William Kahale Caspino

Theses and Dissertations

Transport and deposition of metal particles is a source of environmental and public health concern. Understanding how ambient conditions and the properties of the particles interact to influence the dispersal range can provide information on and the possible extent of environmental contamination. Controlled laboratory experiments and modeling were utilized to determine when such particles would deposit. Particle samples containing heavy metals, a Palladium-dominant alloy and a Nickel/Aluminum dominant alloy LANA, were released in a static column, and the vertical displacement was tracked utilizing a Phantom v7.3 camera and a camera lens. Electron microscopy revealed that particles are not spherical and …

A Novel Approach To Evaluate Seatbelt Non-Compliance Of Drivers In New Jersey, Md Arifuzzaman Nayeem

Theses and Dissertations

This study intends to investigate the non-compliant behavior of drivers with seatbelt use in New Jersey. By examining various factors such as temporal and roadway characteristics, this study seeks to identify the underlying causes of this seatbelt non-compliance behavior. To overcome the limitations of traditional methods like cross-sectional data collection, a novel approach known as moving vehicle method was employed. To gain further insights, hypothesis tests were performed across the entire dataset to pinpoint significant temporal, roadway, and geometric factors contributing to non-compliant behaviors. In the subsequent step, the association of other risky behaviors like speeding and distracted driving with …

Development Of Electrically Conductive Asphalt Pavements For Deicing Applications In Cold Regions, Ashith Marath Padinhare Purakkal

Theses and Dissertations

Winter conditions often lead to significant traffic delays and safety risks due to ice or snow accumulation on pavement surfaces. This study evaluates the potential of electrically conductive asphalt (ECA) pavements to prevent such accumulations by melting ice and snow under real-world conditions. The study involved preparing ECA mixtures using graphite and carbon fibers, three carbon fiber lengths (3 mm, 6 mm, and 24 mm), and aggregates with two nominal maximum aggregate sizes (NMAS) (4.75 mm and 9.5 mm). Electrical resistivity, rutting susceptibility and cracking resistance of compacted ECA mixtures were evaluated. Results indicated that ECA mixtures with 15% graphite …

Distracted Driving: Identification, Contributing Factors, And Safety Countermeasures, Ahmed Sajid Hasan

Theses and Dissertations

Distracted driving is a hazardous behavior responsible for 25% of all fatal traffic crashes in New Jersey. While traditional methods such as surveys, videos, and simulations have been used to identify and evaluate distracted driving events, these approaches primarily provide cross-sectional data that fails to capture the true rate of distraction on the road. This study addresses this limitation by collecting longitudinal data on distracted driving events across selected corridors in New Jersey. A data collection team continuously drove through these corridors, manually counting and video recording driver distraction events. The collected data was then analyzed to assess the significance …

Effective Integration Of Waste Plastics In Hot Mix Asphalt Mixtures: Towards Sustainable Infrastructure, Venkatsushanth Revelli

Theses and Dissertations

The study investigated the potential of waste plastics such as low density polyethylene(LDPE), high density polyethylene(HDPE), polyethylene terephthalate(PET) and polystyrene (PS) for designing superior performing asphalt mixtures. Both wet mixing and dry mixing methods were adopted for designing plastic modified asphalt mixtures. Initially LDPE and HDPE were selected for developing plastic modified binders, based on melting characterization, determined from differential scanning calorimeter(DSC). In wet mixing process, the influence of dosage, size of plastic, blending duration and interaction between plastic and asphalt were assessed. Plastics were found to exhibit phase separation with asphalt, while finer particles take only longer to segregate …

Classifying Floor Accelerations For Gait Estimation And Detection, Jean Michel Franco Lozada

Theses and Dissertations

Structural vibrations are traditionally used to learn about structural systems, such as determining the dynamic characteristics of a structure and evaluating its structural performance under certain dynamic loads. Recently, researchers have proposed the use of structural vibrations to know more about the occupants of the structure in addition to the structure itself. One example of such would be to determine when a person falls, or to identify the location of a person walking in a building. Using structural vibrations to study occupants can be directly applicable to many fields, ranging from healthcare to security applications. One powerful use of structural …

Erodibility Of Sand-Silt-Xanthan Gum Mixtures, Edwin Kotey

Theses and Dissertations

The high frequency of earthen embankment failure recorded during floods has led to the general rule that embankments should not be overtopped. This notwithstanding, overtopping cannot be entirely avoided particularly during extreme events, such as winter storms and hurricanes. Reducing soil erodibility is thus fundamental to prevent and control disasters caused by embankment failure. Recent studies have explored the use of environmentally friendly additives, such as biopolymers, to improve soil properties. Geotechnical tests have shown that biopolymers can effectively increase soil strength, but little is known about biopolymer-treated soil resistance to erosion by flowing water. Results of flume experiments to …

B-Spline Impulse Response Functions For Transient Ssi Analysis Of Pile Foundations, Kingsley C. Ozegbe

Theses and Dissertations

The advent and consequential advancements in geotechnical earthquake engineering has made soil-structural analysis (SSI) an important component in the analysis and design of earthquake resistant structures. The filtering effects of pile foundations which reduces the seismic demand on pile-supported superstructure when they are subjected to seismic waves have been investigated and confirmed by several researchers in the last 40 years. To this end, several methods of analyzing the effects of SSI have been developed over the years. From the simplified Winkler model to the more robust finite element method (FEM) and boundary element method (BEM), researchers and structural engineers alike …

Dynamic Response Evaluation Of Loose Gravelly Soils In Centrifuge Modeling Experiments, Siwadol Dejphumee

Theses and Dissertations

Dynamic behavior of gravelly soil has gained more attention in recent years as several case histories of liquefaction of gravelly soil have been reported. Liquefaction can cause failure of infrastructure, leading to economic damage and loss of life. Gravelly soil has unique characteristics and engineering benefits, providing a prevalent and versatile construction material for various infrastructure projects. Therefore, understanding of the gravelly soil behavior under seismic load is critical for assessing the resilience of infrastructure located in seismically active regions. To date, only a few experimental research studies have focused on the dynamic response of gravelly soil, and these studies …