Civil Engineering Commons^™

Nandi Clean Kitchen Study, Oliver S. Schroeder, Mina Mohsenian

Engagement & Service-Learning Summit

No abstract provided.

Purdue’S Biowall, Purdue Ect Team

ECT Fact Sheets Archive

Mechanical ventilation, energy recovery ventilation, and infiltration (air that leaks into a building) are commonly used to introduce fresh air. These are all valid approaches, but a living plant-based filter is an innovative complement to these traditional technologies. A Biowall has the potential to improve indoor air quality while reducing the quantity of air needed for ventilation, creating the potential for energy savings. Figure 1 shows a Biowall prototype being evaluated in the ReNEWW House, a research home located near the Purdue University campus (http://www.renewwhouse.com/).

Mdp (Machine Drive Power) Intelligent Compaction Technology, Purdue Ect Team

ECT Fact Sheets Archive

Caterpillar developed MDP (Machine Drive Power) technology to fill this gap. Rather than an accelerometer and vibratory drum, it uses the principle of rolling resistance to provide indications of soil stiffness. This allows it to perform more reliably on cohesive and granular soils with less variability than accelerometer systems. It also means that the technology can be used on both vibratory and static drum compactors, which are often used on larger sites. While the technology is quite useful on its own, it is even better as a complementary technology to the existing accelerometer-based systems. Contractors who use vibratory soil compactors …

Datumate, Purdue Ect Team

ECT Fact Sheets Archive

Datumate is digitally transforming civil engineering processes used in construction, surveying and infrastructure inspection markets with fully automated, highly precise, cost effective and safe tools. It utilizes state-of-the-art image processing and advanced drones and camera technologies dramatically reducing the amount of time surveying crews spend in the field, speeding up construction progress checks and shortening infrastructure inspection duration, while maintaining survey grade accuracy. The intuitive, simple and automated solutions increase productivity by saving field and office time in civil engineering and inspection projects of roads, intersections, stockpile volumes, topography, piping, industrial facilities, bridges, property surveys, building facades, railways, cellular infrastructure …

Performance Of Mud Mortar Walls Under Seismic Loading, Christian L. Berneking Vi, Santiago Pujol, Prateek Pratap Shah, Lucas Laughery

The Summer Undergraduate Research Fellowship (SURF) Symposium

The inherently brittle nature of unreinforced masonry structures results in poor performance during earthquakes, presenting major hazards to communities. Many of these structures found in Nepal were severely damaged or destroyed during two earthquakes in 2015. The purpose of this project is to test the effect on seismic response of several modifications to stone and mud mortar structures. These structures are common in many areas of Nepal. Two T-shaped stone and mud mortar masonry walls are constructed. The first wall has no modifications and represents current building practices. The second wall uses steel wire mesh as external reinforcement. Each wall …

Electrochemical Removal Of Lead In Water With Multi-Wall Carbon Nanotube Filters, Benjamin M. Stryker, Sol Park, Zhi Zhou

The Summer Undergraduate Research Fellowship (SURF) Symposium

Heavy metals, such as lead, are highly toxic and typical removal techniques are costly for household applications; causing serious public health risks and economic burdens. Previous studies using electrochemical filtration showed that singe-wall carbon nanotube membranes (SWCNTs) were effective at removing lead, but the use of less expensive multi-walled carbon nanotubes (MWCNTs) has not been fully explored. Therefore, there is a critical need to determine if MWCNTs are cost-effective for the removal of lead in water. The removal efficiency of lead(II) ions in an aqueous solution was evaluated in a flow-through filtration system over 50 minutes at 1.5 mL/min. Calcium …

Evaluation Of Radiation And Design Criteria For A Lunar Habitat, Hayley E. Bower, Daniel Gomez, Antonio Bobet, Julio A. Ramirez, Shirley J. Dyke, H. Jay Melosh

The Summer Undergraduate Research Fellowship (SURF) Symposium

Extraterrestrial habitation has long been the object of science fiction, and experts in the fields of science and engineering have proposed many designs for a lunar base. The research conducted has focused on either structural stability, radiation protection, or meteorite-impact vulnerabilities, but rarely have these been considered together. The Resilient ExtraTerrestrial Habitats (RETH) project aims to design a lunar habitat from a hazards perspective, considering general degradation, meteorite impacts, seismic activity, radiation exposure, thermal extremes, and geomagnetic storms in addition to the physiological, psychological, and sociological aspects of astronauts living in such a habitat. Several members of the RETH team …

Technology To Manufacture Oriented Pvc (Pvc-O) Pipes, Purdue Ect Team

ECT Fact Sheets Archive

The development of Molecor´s technology, which is based on the application of a Molecular Orientation process, has delivered a significant turning point in the pipelines sector. With this technological development, the company has begun to manufacture TOM® PVC-O pipes, the most eco-friendly pipes on the market. The Molecor technology enabled eradicating many of the existing disadvantages of thermoplastic pipes.

This technology delivers a clear objective; to provide the water industry with a solution for pipes carrying pressurized water in an environmentally friendly, yet cost efficient manner. This also extends a service life compared to pipeline materials currently in use.

The …

Full-Water Column Turbulence Parameterization Of Stratified Waters In Southern Lake Michigan, Kyla A. Prendergast, Cary D. Troy, David Cannon

The Summer Undergraduate Research Fellowship (SURF) Symposium

Full water column mean flow and turbulence structure was characterized at two stratified locations in Lake Michigan (a. Muskegon, MI; b. Michigan City, IN) in order to better understand the filtration potential of invasive quagga mussels. Invasive quagga mussels in Lake Michigan are filter feeders and can dramatically alter clarity as well as the biological/chemical characteristics of the water column. This filtering capacity is highly contingent on turbulence characteristics throughout the water column, which is poorly understood in the Great Lakes. Using velocity, temperature, and turbulence data collected from these locations, the structure of the water column turbulence was modeled …

Hazard Assessment Of Meteoroid Impact For The Design Of Lunar Habitats, Herta Paola Montoya, Shirley Dyke, Julio A. Ramirez, Antonio Bobet, H. Jay Melosh, Daniel Gomez

The Summer Undergraduate Research Fellowship (SURF) Symposium

The design of self-sustaining lunar habitats is a challenge primarily due to the Moon’s lack of atmospheric protection and hazardous environment. To assure safe habitats that will lead to further lunar and space exploration, it is necessary to assess the different hazards faced on the Moon such as meteoroid impacts, extreme temperatures, and radiation. In particular, meteoroids pose a risk to lunar structures due to their high frequency of occurrence and hypervelocity impact. Continuous meteoroid impacts can harm structural elements and vital equipment compromising the well-being of lunar inhabitants. This study is focused on the hazard conceptualization and quantification of …

Purdue Airsense: An Affordable Way To Measure And Study Air Pollution, Stephane Junior Nouafo Wanko, Shadi Tariq Azouz, Ruihang Du, Brandon Boor, Greg Michalski

The Summer Undergraduate Research Fellowship (SURF) Symposium

Air pollution is a major health hazard worldwide, accounting for one-eighth of all deaths in 2012 (World Health Organization). Globally, there is a severe lack of ground-based spatiotemporal monitoring of gaseous and particulate air pollutants, particularly in Africa, South and Central America, and the Middle East. This is in great part due to the high costs of air quality instrumentation that meet accuracy and reliability criteria set by monitoring agencies. The air quality data that is available is often not presented to the public in a user-friendly manner. Taking advantage of recent developments in low-cost sensing technologies, an integrated sensor …

Buckling Of Cylindrical Shells Under Wind Loading, Tianlong Sun, Eyas Azzuni, Sukru Guzey

The Summer Undergraduate Research Fellowship (SURF) Symposium

Cylindrical shells such as aboveground steel storage tanks are widely used to store gases, chemicals and fuels. Stiffener rings are introduced to prevent cylindrical shells from buckling due to wind loads. The current top wind stiffener design rules used in the USA for such cylindrical storage tanks are specified in API 650. However, the design methodology of top stiffener rings is overly conservative. Therefore, relaxation of the design rules for the top stiffener is investigated in this study. The API 650 mandated top stiffener size was reduced to the same size as the mandated intermediate stiffener ring in this study. …

Fluid Isolator, Purdue Ect Team

ECT Fact Sheets Archive

The reliability of concrete infrastructure is vital to ensuring daily life, as well as commerce, can progress without interruption. From the pavement of interstate highways to the driveways and sidewalks in a local neighborhood, concrete is expensive to install and often even more expensive, and intrusive, when it needs to be replaced. Unfortunately, to maintain functionality in winter climates concrete is heavily exposed to deicing salts. This not only affects the roads, driveways, and sidewalks where salt is applied directly, but many other areas such as parking and residential garages where vehicles (and people) will track salt along with water …

Netpoint®, Purdue Ect Team

ECT Fact Sheets Archive

The vast majority of construction scheduling software uses a combination of spreadsheets and Gantt charts for developing and depicting Critical Path Method (CPM) schedules. While this paradigm works for the expert scheduler, it is not conducive to collaboration, and it is prohibitively difficult for non-scheduling experts to understand.

NetPoint® provides a dynamic, visual interface conducive to touch and gestural input. Activities are drawn directly on a time-scale and may be placed on the same row or arranged automatically using codes or the WBS. Such control of the presentation makes it easier to communicate the plan to any type of audience. …

Smartvid.Io, Purdue Ect Team

ECT Fact Sheets Archive

The collection, organization, and retrieval of industrial media is a pervasive challenge that is especially glaring for companies in the AEC industry. Construction projects often generate large volumes of pictures & videos from the field for tracking progress and communicating between engineers, contractors, and subcontractors. It is not uncommon for field personnel to capture hundreds of photos per week on any given jobsite.

Smartvid.io is a cloud-based software solution designed for the specific needs of industrial media. The application’s internal deep-learning engines, collectively nicknamed VINNIE (for ‘Very Intelligent Neural Network for Insight and Evaluation’), use speech and image recognition to …

Hillman Composite Beam (Hcb®), Purdue Ect Team

ECT Fact Sheets Archive

The Hillman-Composite Beam (HCB®), is an innovative structural member for use in highway and railroad bridges as well as marine facilities. The HCB is essentially a lightweight reinforced concrete beam strengthened and protected by a corrosion-resistant and resilient Fiberglass Reinforced Polymer (FRP) shell.

The beam is comprised of three main components, a concrete arch (compression reinforcement), an FRP bottom flange encapsulating steel strands tying the ends of the arch together (tension reinforcement) and the FRP shell. Galvanized Rebar “shear connectors” are used to make the beam composite with the concrete deck in the same manner as pre-stressed concrete beams.

The …

Industrial-Grade Monitoring Solution: Hoistcam, Purdue Ect Team

ECT Fact Sheets Archive

Safety and productivity are top priorities for contractors and industrial operations. Improving either makes a company more profitable and competitive. Technology advancements that can do both are important for every company to consider. HoistCam^TM industrial-grade video monitoring solutions can improve employees’ productivity and workplace safety in the construction industries. HoistCam also improves efficiency of operations and reduces job site accidents resulting in substantial cost savings to a contractor.

HoistCam™ is an integrated, wireless video system. The use of HoistCam eliminates blind lifts, blind spots and can share the live video with anyone, anywhere with solid security and easy control. …

Purdue Ect Report - Fourth Quarter 2016, Purdue Ect Team

ECT Fact Sheets Archive

Fourth Quarter 2016

This is a quarterly report from the Purdue ECT.

Compliant Curb Ramp Solutions, Katherine Smutzer

Purdue Road School

Public Rights of Way Accessibility Guidelines (PROWAG) for Curb Ramps. Answers to frequently asked questions for Curb Ramps and Curb Ramp Designs. Examples of curb ramp designs in restricted conditions and other types of curb ramp examples.

Mash Implementation For Guardrail, Katherine Smutzer

Purdue Road School

A review of the Manual for Assessing Safety Hardware (MASH) Implementation for w-beam guardrail. What will change and what designers need to know when moving to MASH.

Road Zipper™, Purdue Ect Team

ECT Fact Sheets Archive

Construction work zones are growing in number around the world. The natural aging of existing roadway infrastructure ensures that more and more maintenance and rehabilitation will be required. Work zones, by their very definition, create two major problems that must be addressed in some way: safety and mobility. In the United States, highway work zones are responsible for almost 25% of all non-recurring congestion and 10% of overall congestion. Vehicle accidents are more common in work zones, and traffic congestion through work zones on urban arterials and freeways is often considered to be “unavoidable." To address these issues, ROAD ZIPPER™ …

Lucidpipe™ Power System, Purdue Ect Team

ECT Fact Sheets Archive

In most gravity fed water transmission pipelines, it is desired to reduce excess pressure head to prevent undue strain on a pipeline and lower the incidence of leaks. Normally this is done with pressure reducing valves that essentially burn off this excess pressure as heat. The LucidPipe™ system converts it to low cost electricity thereby removing unwanted pressure and generating energy at the same time - energy that can be put used behind the grid or put back on the grid. The LucidPipe™ system extracts a small percentage of pressure head providing nearly invisible operation allowing water operators to fulfill …

Integration Of Bim And Utility Sensor Data For Facilities Management, Kamal Suprabhas

Open Access Theses

Building information modelling represents a building as a database of coordinated, consistent and computable information in construction (Sabol, 2008). There has been a recent trend to study the usage of BIM for post-construction facility management. Recently, attempts are also being made to link a BIM model with smart sensing technology or building automation systems (BAC). This thesis aims to investigate the feasibility of using sensor data from mote based light sensors tied to a BIM model, to be used for maintenance based facility management. More specifically, a prototype will be developed that integrates lighting sensor data collected using a mote …

Multimedia Techniques For Construction Education And Training, Wayne A. Bunnell

Open Access Theses

The current profession of civil engineering often focuses education and training on code compliance rather than constructability and construction techniques. Also, it is well accepted that it takes a decade or more for engineers to develop a high-level project construction understanding and many state departments of transportation rely on in-field training for entry-level inspectors, with little or no education provisions for contractors. This research investigated the use of time-lapse photography to develop training and education material that will improve the understanding of project construction and crucial quality control specifications of an entry-level engineer, contractor, or inspector. Overall, the project team …

New Screening Method For Overweight Vehicles, Goran Veljko Milutinovic

Open Access Theses

Throughout the U.S., state agencies are issuing an increasingly large number of permits for overweight vehicles every year. There are various methods used by state agencies to process permit requests; the Indiana Department of Transportation employs a screening process that consists of the Tennessee Formula (allowable weight is determined and checked, for every axle group) in combination with the Gross Vehicle Weight limit. If a permit truck satisfies these two screening criteria, it is permitted; otherwise, it is further processed with refined analyses. The Tennessee Formula is based on Allowable Stress Design. However, most design and evaluation conducted today is …

Quantifying Asphalt Emulsion-Based Chip Seal Curing Times Using Electrical Resistance Measurements, Miguel A. Montoya Rodriguez

Open Access Theses

Chip seals are among the most cost-effective surface treatments available for asphalt pavement preventive maintenance. Chip sealing typically consists of covering a pavement surface with asphalt emulsion into which aggregate chips are embedded. The asphalt emulsion cures through the evaporation of water, which helps to provide mechanical strength for the chip seal. Ultimately, the curing process enables the emulsion to adhere to the pavement while keeping the aggregate chips in place. The curing time for the chip seal depends on many factors, such as the asphalt emulsion and aggregate types, aggregate moisture content, emulsion and aggregate application rates, and environmental …

Effect Of Temperature On Deep Lined Circular Tunnels In Isotropic And Transversely Anisotropic Elastic Ground, Fei Tao

Open Access Theses

A tunnel is a passageway constructed through soil or rock. It is one of the most important underground structures and has been widely used in transportation. Much research has been done on tunnel performance and on the interaction between ground, excavation, liner installation and support. The work has provided a better understanding of the interplay that exists between deformations and stresses transferred from the ground to the support. Significant insight into the problem has been provided by closed-form analytical solutions. A number of analytical formulations have been obtained for underground openings and lined tunnels under different scenarios, namely shallow or …

The Influence Of Alkalinity Of Portland Cement On The Absorption Characteristics Of Superabsorbent Polymers (Sap) For Use In Internally Cured Concrete, Juan D. Tabares Tamayo

Open Access Theses

The concrete industry increasingly emphasizes advances in novel materials that promote construction of more resilient infrastructure. Due to its potential to improve concrete durability, internal curing (IC) of concrete by means of superabsorbent polymers (SAP) has been identified as one of the most promising technologies of the 21st century. The addition of superabsorbent polymers into a cementitious system promotes further hydration of cement by providing internal moisture during the hardening and strength development periods, and thus limits self-desiccation, shrinkage, and cracking.

This thesis presents the work performed on the series of cement pastes with varying alkalinity of their pore solutions …

Fea Methodology For System-Level Redundancy Evaluation: Application To Non-Composite Steel Bridges, Francisco Javier Bonachera Martin

Open Access Dissertations

Currently, all steel bridges with members designated as Fracture Critical Members (FCMs) are required to undergo hands-on inspections every 24 months. A FCM is a primary steel tension member (or portion of) which failure results in collapse or loss of serviceability of a bridge. However, presently, there are no codified procedures used to evaluate system-level redundancy in steel bridges. In this dissertation, finite element analysis (FEA) procedures, techniques and inputs were researched in order to develop bridge models that account for the mechanisms that lead to redundant capacity after the failure of a primary steel member. These mechanisms include partial …

The Effects Of Chloride-Based Deicing Chemicals On Degradation Of Portland Cement Mortars With Alkali Reactive Aggregate, Charles Yicheng Chiu

Open Access Dissertations

The assessment of the influence of deicing chemicals on alkali reactivity of aggregates is still an area of active research, particularly with respect to the combined effects of long-term exposure to deicers, freezing and thawing cycles, and wetting and drying cycles. In order to develop a more comprehensive view of these topics, the present study was conducted in three phases. The focus of the first phase was on studying the effects of the chloride-based deicers on the alkali silica reaction (ASR) using accelerated test methods (i.e. the test was performed at high temperature (80 °C) as per modified ASTM C1260). …