Civil Engineering Commons^™

Automatic Arrhythmia Beat Detection: Algorithm, System, And Implementation, Wisnu Jatmiko, I Md. Agus Setiawan, Muhammad Ali Akbar, Muhammad Eka Suryana, Yulistiyan Wardhana, Muhammad Febrian Rachmadi

Makara Journal of Technology

Cardiac disease is one of the major causes of death in the world. Early diagnose of the symptoms depends on abnormality on heart beat pattern, known as Arrhythmia. A novel fuzzy neuro generalized learning vector quantization for automatic Arrhythmia heart beat classification is proposed. The algorithm is an extension from the GLVQ algorithm that employs a fuzzy logic concept as the discriminant function in order to develop a robust algorithm and improve the classification performance. The algorithm is tested against MIT-BIH arrhythmia database to measure the performance. Based on the experiment result, FN-GLVQ is able to increase the accuracy of …

Optimization Of Electricity Generation Schemes In The Java-Bali Grid System With Co2 Reduction Consideration, Farizal Farizal, Wenty Eka Septia, Amar Rachman, Nasruddin Nasruddin, Teuku Meurah Indra Mahlia

Makara Journal of Technology

This research considers the problem of reducing CO2 emissions from the Java-Bali power grid system that consists of a variety of power-generating plants: coal-fired, natural gas, oil, and renewable energy (PV, geothermal, hydroelectric, wind, and landfill gas). The problem is formulated as linear programming and solved using LINGO 10. The model was developed for a nation to meet a specified CO2 emission target. Two carbon dioxide mitigation options are considered in this study, i.e. fuel balancing and fuel switching. In order to reduce the CO2 emissions by 26% in 2021, State Electric Supply Company (PLN) has to generate up to …

Apparent Porosity And Compressive Strength Of Heat-Treated Clay/Iron Sand/Rice Husk Ash Composites Over A Range Of Sintering Temperatures, M. Nizar Machmud, Zulkarnain Jalil, Mochammad Afifuddin

Makara Journal of Technology

Novel composites of clay/iron sand/rice husk ash (RHA) have been developed. Electric furnace was used to perform heat treatment on the composites to study the effect of sintering temperature on their apparent porosity and compressive strength. Two types of RHA with different bulk density were prepared to gain an understanding of the influence of apparent porosity on compressive strength of the heat-treated composites over a range of sintering temperatures. Heattreated composites, made of clay/iron sand and clay/RHA, were also prepared as a referenced material. X-ray diffraction (XRD) analysis was further performed to comprehensively discuss the role of iron sand on …

The Effect Of Irradiation Of Fe And Ar Ion On The Surface Morphology Of Diamond Thin Film Related To The Magnetoresistance Property, Salim Mustofa, Setyo Purwanto, Kenji Mishima

Makara Journal of Technology

The irradiation of Fe and Ar ion was applied on the surface of diamond/Si thin film to know its effect on the morphology of thin film.The magnetoresistance property was also studied. Ion irradiation treatment using Fe ion followed by argon ion at the energy of 70keV and a dose of 1 x 1015 ion/cm2 have been conducted on the surface of two types of thin film, diamond/Si (111) and diamond/Si (100). Both thin films were made by using a CVD method, and the thickness of the thin film is 1000-nm. From simulations using the software called Stopping and Range of …

Use Of Green Mussel Shell As A Desulfurizer In The Blending Of Low Rank Coal-Biomass Briquette Combustion, Mahidin Mahidin, Asri Gani, M. Reza Hani, Muhammad Syukur, Hamdani Hamdani, Khairil Khairil, Samsul Rizal, Abdul Hadi, T.M.I. Mahlia

Makara Journal of Technology

Calcium oxide-based material is available abundantly and naturally. A potential resource of that material comes from marine mollusk shell such as clams, scallops, mussels, oysters, winkles and nerites. The CaO-based material has exhibited a good performance as the desulfurizer or adsorbent in coal combustion in order to reduce SO2 emission. In this study, pulverized green mussel shell, without calcination, was utilized as the desulfurizer in the briquette produced from a mixture of low rank coal and palm kernel shell (PKS), also known as bio-briquette. The ratio of coal to PKS in the briquette was 90:10 (wt/wt). The influence of green …

The Knowledge-Based Analysis On Medium Resolution Images Of Remote Sensing To Extraction Information Land Use Type Scs-Cn, The Case Study On Grompol Watershed, Puguh Dwi Raharjo, Totok Gunawan, Mohammad Pramono Hadi

Makara Journal of Technology

Remote sensing imagery Landsat-8 is one image that has a good temporal resolution; in addition to the availability of data, this image can be obtained free of charge. Land cover type SCS-CN is part of a unit of land that affects runoff. The use of medium resolution imagery in reducing the SCS-CN land use type is considered relatively difficult, and it yields less good accuracy. Limitations on multispectral classification only rely on facts derived from spectral reflection, so that the two data are the same since different characteristic results are not so good. This study aims to determine the accuracy …

Sugarcane Bagasse As A Carrier For The Immobilization Of Saccharomyces Cerevisiaein Bioethanol Production, Sita Heris Anita, Wibowo Mangunwardoyo, Yopi Yopi

Makara Journal of Technology

Sugarcane bagasse was used as a carrier to immobilize Saccharomyces cerevisiae in bioethanol production. This research aims to study the potential use of sugarcane bagasse as an alternative carrier for cell immobilization and improvement in the production process of cell immobilization in bagasse. The results showed that the physical characteristics of sugarcane bagasse as a carrier were water content (7.77 ± 0.35%), water retention (4.80 ± 0.44 g/g), water absorption index (8.58 ± 0.22 g/g), and lignin content (24.40 ± 1.52 %). Determination of cell retention was performed in an inoculum volume of 50 mL yeast suspension with various carrier …

Durability-Based Optimal Design Methodology For Rc Members In Corrosive Environment, Saeid A. Alghamdi, Shamsad Ahmad, Adamu Lawan

International Conference on Durability of Concrete Structures

No abstract provided.

Mat-701: Predicting The Compressive Strength Of Ultra-Lightweight Concrete By An Artificial Neural Network, Jordan Ouellet, Jean-Luc Martel, Claudiane Ouellet-Plamondon, Alan Carter

Canadian Society for Civil Engineering

Ultra-lightweight concrete (ULWC) has potential applications for floating structures and architectural elements because of its dry density coming in at under 1000 kg/m3. The objective was to develop an artificial neural network (ANN) to aid the ULWC designer according to his needs. Boundary conditions were set for each material and 13 constraints based on the water binder ratio, density, air content, binder and aggregate content. The ANN predicted the compressive strength with a comfortable margin of error, with the gap encountered being attributed to variability in workability. Precise constraints and boundary conditions are needed to ensure a lower variability in …

Mat-702: Mechanical Behaviour Of Ultra-High Performance Concrete Obtained With Different Concrete Constituents And Mix Designs, Mahmoud Sayed-Ahmed, Khaled Sennah, Moulay Youssef Monsif

Canadian Society for Civil Engineering

This research investigates the mechanical behaviour for the Ultra-High Performance Concrete (UHPC) and UltraHigh Performance Fiber Reinforced Concrete (UHPFRC). UHPC and UHPFRC are designed to be self-consolidated concrete that level itself without mechanical vibration due to its highly flowability and moderate viscosity. UHPFRC is used as joint-fill cementitious materials for the connections of prefabricated bride elements and systems used for the Accelerated Bridge Construction and rapid bridge replacement. The main concrete constituents of such materials consist from: binders (cement), powders (fillers), liquids (additives), water, and fibers. Hence, the mixture proportion design should follow a densified mixture design algorithm to densify …

Mat-704: Resistance Of Concrete Incorporating Portland Limestone Cement To Sulfuric Acid, Mahmud Amin, Mohamed T. Bassuoni

Canadian Society for Civil Engineering

Concrete has long been the most popular choice for constructing key infrastructural elements such as sewer pipes, water treatment facilities, industrial floors and foundations. However, many field cases from all around the world have shown that concrete elements in these environments are severely damaged due to biogenic and/or chemical sulfuric acid attack. Since high alkalinity is required for the stability of the cementitious matrix, concrete is highly prone to acid attacks, which decalcify and disintegrate the hydrated cement paste to various levels based on exposure conditions and type of concrete. Numerous studies have been conducted to enhance the durability of …

Mat-705: Improving The Efficiency Of Zinc Sacrificial Anodes In Repaired Concrete, Ahmed G. Bediwy, Mohamed T. Bassuoni, Martin Beaudette

Canadian Society for Civil Engineering

Zinc sacrificial anodes are considered an effective and economical method to prevent the electrochemical corrosion of steel bars by providing cathodic current to bars, which can provide corrosion protection at low galvanic current densities in the range of 0.2 to 2 mA/m2. Sacrificial anodes are commonly used in RC structures particularly in bridge decks to mitigate a critical phenomenon that occurs in the original concrete beside the repaired patches, which is known as the ‘halo effect’. One of the key factors affecting the efficacy of zinc anodes is the resistivity of concrete or cementitious repair material in which these anodes …

Mat-707: Development Of Enhanced Test Methods To Evaluate Alkali-Silica Reaction In Concrete, Noura Sinno, Medhat Shehata

Canadian Society for Civil Engineering

The research presented in this paper studies the effect of sample geometry and temperature on expansion due to alkali-silica reaction (ASR) in concrete. Expansions of cubes and cylinders are compared to those of the standard prisms. Control samples, samples with fly ash (FA) and others with slag are investigated at two temperatures, 38°C and 60°C. At 38°C, results showed that smaller samples have higher expansion at early ages. However, larger samples such as cubes and cylinders seem to reach higher expansion compared to prisms after 32 weeks for both control and samples with fly ash. In addition, the results showed …

Mat-708: Monitoring The Corrosion Process Of Reinforced Concrete Flat Slab-Column Connection, Mahmoud E. Said, Amgad Hussein, Assem A. A. Hassan

Canadian Society for Civil Engineering

The corrosion of the steel reinforcement embedded in a two-way reinforced concrete flat slab around the column stub area was investigated in this study, which aimed to studying the effect of corrosion on the shear punching behavior. Two square flat slab-column connections were cast, the flat slab dimension was 1900 mm × 1900 mm × 150 mm, and the column dimensions was 250 mm × 250 mm. A specific delaminated area was corroded around the column stub to emphasize the effect of corrosion around punching area. The corrosion reached two levels of mass loss uniformly over that specified area: 0% …

Mat-711: Utilization Of Recycled Crumb Rubber In Structural Self-Consolidating Concrete, Mohamed K. Ismail, Assem A. A. Hassan, Madolyn A. Lundrigan

Canadian Society for Civil Engineering

The present work evaluates the impact of using recycled crumb rubber (CR) as a partial replacement of fine aggregate on the fresh and mechanical properties of concrete composite, especially when self-consolidating concrete is used. In this study, seven mixtures containing various amounts of fine CR (0-30% by volume of sand) were tested. The fresh properties tests included flowability, passing ability, and segregation resistance. On the other hand, the mechanical properties tests included compressive strength, modulus of elasticity, splitting tensile strength, and flexural strength. The results indicated that although increasing the CR replacement decreased the fresh and mechanical properties of concrete, …

Mat-712: Microstructural Investigations On The Self-Healing Ability Of Engineered Cementitious Composites Incorporating Different Mineral Admixtures, Ahmed Alyousif, Khandaker M. Anwar Hossain, Mohamed Lachemi, Mustafa Sahmaran

Canadian Society for Civil Engineering

The present study investigates the impacts that self-healing has on the microstructure characteristics of microcracked Engineered Cementitious Composites (ECC). These have two contrasting maturity levels and, furthermore, they involve three varying mineral admixtures that have very different chemical constituents. The impact of self-healing on the transport characteristics was examined by employing rapid chloride permeability tests (RCPT). The findings indicated that, if the appropriate mineral admixture type and conditioning were chosen, it would be possible to enhance the majority of the chloride ion penetrability levels following a 30-day period of water curing. As a result, the majority of the findings were …

Mat-713: Evaluation Of Ndt Techniques For Concrete Bridge Decks Using Fuzzy Analytical Hierarchy Process, Tarek Omar, Moncef L. Nehdi

Canadian Society for Civil Engineering

Considering the colossal backlog of deteriorating bridges, transportation agencies need to systematically evaluate bridge deck conditions in order to optimize the timing, scope, and approach of preventive maintenance, repair, and replacement. Over the last few years, there have been growing interest among bridge infrastructure stakeholders in using non-destructive methodologies for bridge inspection, evaluation, and maintenance. Nondestructive testing (NDT) techniques can provide needed information about the “under-the-surface” deteriorated condition of bridge decks. This paper examines the most common NDT technologies for assessing bridge decks. Each technology was rated based on five performance measures: capability to detect subsurface defects, speed of data …

Mat-714: Condition Assessment And Deterioration Prediction Tools For Concrete Bridges: A New Look, Tarek Omar, Moncef L. Nehdi

Canadian Society for Civil Engineering

Structural problems created by corrosion, ageing, aggressive environments, material defects and unforeseen mechanical or seismic loads can compromise the serviceability and safety of bridges. The importance of an effective bridge-management system (BMS) cannot be overstated, especially in light of the recent collapse of bridges in North America and elsewhere. Several technologies are available for assessing the condition of concrete bridges and a number of deterioration models are used to predict future bridge conditions and estimate associated funding requirements. This paper critically reviews the different available condition assessment and deterioration prediction approaches for concrete bridges. The potential applications of condition assessment …

Mat-719: Investigation Of Grouted Precast Concrete Wall Connections At Subfreezing Conditions, Douglas James Provost-Smith, Mohamed Elsayed, Moncef L. Nehdi

Canadian Society for Civil Engineering

The effect of exposing grouted precast wall connections to subfreezing curing temperatures at early-age was explored in this study. In cold weather construction, heating of the surrounding environment of grouted precast wall connections is usually conducted for short periods of time. Hence, subfreezing conditions can affect the strength of the grout and the bond strength of the connection, which can ultimately compromise the integrity of the structure. In this study, grout specimens typical of that used in precast wall construction were cured at ambient conditions for one day, and then placed in an environmental chamber at subfreezing temperatures (-10°C and …

Mat-720: Effect Of Pore Structure On Concrete Deterioration By Physical Sulphate Attack, Ahmed R. Suleiman, Moncef L. Nehdi

Canadian Society for Civil Engineering

Repeated crystallisation of salt minerals has been considered as the driving force for surface scaling of concrete exposed to physical sulphate attack. This damage is initiated when stresses induced by the internal pressure created via repeated salt crystallisation exceed the tensile strength of the concrete. The degree of such damage will depend mainly on the structure and connectivity of pores, which control the penetration of sulphates into the concrete. Several factors affect the pore structure including the concrete constituents, mixture proportions and the curing process. Therefore, in this paper, the effect of the pore structure on concrete deterioration by physical …

Mat-722: Effect Of Fiber Orientation On The Behavior Of Cfrp Confined Concrete Cylinders, Ahmed Sulaiman, Husham Almansour, Hassan Aoude

Canadian Society for Civil Engineering

This paper presents the results of an ongoing experimental investigation examining the effect of fiber orientation and stacking sequence on the behavior of FRP-confined concrete. As part of the experimental study, 100 mm x 200 mm concrete cylinders were jacketed with carbon fiber reinforced polymer (CFRP) sheets and tested under pure axial compressive loading. The specimens were confined using various CFRP stacking sequences, with fibers oriented at 0⁰, 90⁰, and ±45⁰. Furthermore, within each stacking sequence, the numbers of layers was varied from 4 to 8 to examine the effect of number of plies on the behavior of the FRP-confined …

Mat-723: Bond Behaviour Of Grouted Connections Under Monotonic Tensile Loads, Mohamed Elsayed, Douglas James Provost-Smith, Moncef L. Nehdi, Osama Eissa

Canadian Society for Civil Engineering

Grouted bar-in-conduit connections are versatile connections widely used in the precast concrete construction. In precast load bearing wall structures, two vertical wall panels are connected by a reinforcing bar, which is projected from one panel and grouted into a sleeve placed in the other. The main function of the ties is to resist tension induced by in-plane and out-of-plane straining actions and to provide ductility to the wall assembly through the yielding of the reinforcement. Limited information is currently available on the behaviour of such connections. This paper presents the findings of an investigation conducted to investigate the behaviour of …

Mat-732: Experimental Study On The Capacity Of Barrier Deck Anchorage In Mtq Pl-3 Barrier Reinforced With Hm-Gfrp Bars With Headed Ends, Michael Rostami, Khaled Sennah, S. Milad Dehnadi

Canadian Society for Civil Engineering

A recent design work conducted at Ryerson University on PL-3 bridge barrier has led to an economical glass fibre reinforced polymer (GFRP) bar detailing for sustainable construction. A PL-3 barrier wall of 27.6 m length was constructed using the proposed GFRP bar configuration, incorporating the use of V-Rod headed-end bars. The proposed barrier configuration was recently crash tested to qualify its use in Canada’s highway bridges. Then, wall segments of this barrier were tested under static loading to-collapse to determine their structural behavior, crack pattern and ultimate load carrying capacity under simulated vehicle impact load. Test results led to establishing …

Mat-734: Increasing The Durability And Resilience Of Tall Buildings With Precast Concrete Enclosure Systems, Randy A. Van Straaten, John F. Straube, C. Alex Lukachko

Canadian Society for Civil Engineering

In this paper precast concrete wall systems are compared to curtain wall and window wall systems in terms of durability and disaster resilience of multi-story buildings. Window wall systems are currently the enclosure system of choice for tall residential buildings in most parts of North America.

Precast concrete wall systems can be expected to last the lifetime of a building with routine seal replacement. These are highly durable systems. Windows within precast concrete wall systems will require replacement in 25-35 years but represent a limited portion of the wall area and hence are less costly and have less impact on …

Mat-735: Optimizing Performance Of Zinc Coated Reinforcing Steel In Concrete Structures, Martin Gagné, Shannon Pole, Frank Goodwin, Gary Dallin

Canadian Society for Civil Engineering

Corrosion of steel reinforcing bar (rebar) is the most significant cause of concrete failure, resulting in expensive repairs and premature structure replacements across the country. This paper will discuss a new, low-cost, zinc coating process for rebar. The properties of this new coated rebar and its contribution to improvement of concrete performance will be presented together with the status of related national and international standards. The Continuous Galvanized Rebar (CGR) coating process is similar to galvanizing of sheet steel. The zinc coating is durable and resistant to abrasion that is routine during transport and construction, but is also highly ductile …

Mat-744: Assessment Of Performance Of Bio Self-Healing Mortar Using Diatomaceous Earth And Silica Fume, Ahmed J. Al Bughdadi, Mohamed N. Abou-Zeid

Canadian Society for Civil Engineering

Cracking represents a major threat for the integrity and performance of structures. Self-healing concept was introduced to construction materials in order to enhance their performance and extend their service life with less repair. This study aims at assessing the performance of Portland cement mortar incorporating self-healing Bacillus Pseudofirmus bacteria using Diatomaceous earth (DE) to immobilize precursor and bacteria in mortar and lowering the pH level of mortar by using silica fume to provide a suitable growth environment for bacteria to generate limestone. The specimens were prepared at three different bacteria dosages and three DE dosages. Cracking of specimens was induced …

Mat-745: The Effect Of Ground Granulated Blast Furnace Slag And Silica Fume On The Durability Of High Performance Concrete In Bridge Decks, Abdulaziz Alaskar, R. Douglas Hooton

Canadian Society for Civil Engineering

High-performance concrete typically has a low water to cementing materials ratio (w/cm), high binder content and may contain high levels of supplementary cementitious materials. The effects of ground granulated blast furnace slag (GGBFS) and silica fume (SF) on the durability of HPC were investigated. In this study, HPC mixtures at 0.33 w/cm were made with two sources of blended cements containing 8% SF mixed with 25 and 50% GGBFS replacements by mass of cement. The compressive strength, drying shrinkage, thermal deformation and transport properties were tested. The preliminary test results have shown that increased fineness of the blended cement enhances …

Mat-755: Sustainable Road Construction For Heavy Traffic Using High Strength Polymeric Geocells, Sanat K. Pokharel, Meisam Norouzi, Ian Martin, Marc Breault

Canadian Society for Civil Engineering

Construction Sustainability has been the focus of debate ever since the Brundtland commission report ‘Our Common Future’ defined Sustainable Development. Kyoto Protocol and subsequent climate change conferences leading up to the Paris submit this year has put still more emphasis on this agenda. Construction of heavy traffic unpaved access roads require huge amount of aggregate mining and long haulage in the areas of scarce virgin aggregate. Conventional practices in these road constructions seek structural adequacy but never specifically address the sustainability issue. Innovative technology that can reduce the volume of aggregate material while maintaining the structural integrity is required to …

Structural Calculations For Nepal Vocational Learning Center, Nicholas Petrarca

Architectural Engineering

This project goal is to build a Leadership Vocational School for youth, women, differently abled, and local leaders of rural and Kathmandu Nepal. The client for this project is an organization called Sakcham Rural Nepal and they partnered with a humanitarian organization called Journeyman International to find Architecture and Architectural Engineering students to design a safe, attractive and functional building to fit their needs.

Experimental Building Demonstration Model With Viscous Fluid Dampers, Blake Thomas Reeve, Brianna Jean Kufa, Aden Malek Stepanians, Sophie Carmion Ratkovich

Architectural Engineering

The Architectural Engineering major places a heavy emphasis on structural dynamics and the role of wind and seismic loading in building analysis and design. Buildings of high importance that are critical to community function, such as hospitals, often utilize supplemental damping devices like supplemental viscous fluid dampers or base isolators to reduce the overall demands on the structural system. The design and analysis of these dampers are typically not taught at the undergraduate level, and is frequently performed by mechanical engineers, in lieu of structural engineers.

To better understand and research building behavior with supplemental damping devices, our multi-disciplinary team …