Civil Engineering Commons^™

Re-Evaluation Of Acceptance Testing Criteria For Structural Masonry Using The Prism Test Method, James Bristow

UNLV Theses, Dissertations, Professional Papers, and Capstones

The current acceptance criteria for structural masonry in accordance with International Building Code allows for the prism test method to be used. However, without a proper understanding of the effects of variable material properties such as individual masonry unit compressive strength and the various material moduli of elasticity, as well as the effect of field conditions on the unit’s performance, masonry prisms may “fail” to reach the design compressive strength (f’m).

By identifying causes of failure and evaluating the failure magnitude, it is concluded that when the masonry prism test method is utilized for acceptance testing of as-built masonry structures, …

Smartvid.Io, Purdue Ect Team

ECT Fact Sheets Archive

The collection, organization, and retrieval of industrial media is a pervasive challenge that is especially glaring for companies in the AEC industry. Construction projects often generate large volumes of pictures & videos from the field for tracking progress and communicating between engineers, contractors, and subcontractors. It is not uncommon for field personnel to capture hundreds of photos per week on any given jobsite.

Smartvid.io is a cloud-based software solution designed for the specific needs of industrial media. The application’s internal deep-learning engines, collectively nicknamed VINNIE (for ‘Very Intelligent Neural Network for Insight and Evaluation’), use speech and image recognition to …

Hillman Composite Beam (Hcb®), Purdue Ect Team

ECT Fact Sheets Archive

The Hillman-Composite Beam (HCB®), is an innovative structural member for use in highway and railroad bridges as well as marine facilities. The HCB is essentially a lightweight reinforced concrete beam strengthened and protected by a corrosion-resistant and resilient Fiberglass Reinforced Polymer (FRP) shell.

The beam is comprised of three main components, a concrete arch (compression reinforcement), an FRP bottom flange encapsulating steel strands tying the ends of the arch together (tension reinforcement) and the FRP shell. Galvanized Rebar “shear connectors” are used to make the beam composite with the concrete deck in the same manner as pre-stressed concrete beams.

The …

Industrial-Grade Monitoring Solution: Hoistcam, Purdue Ect Team

ECT Fact Sheets Archive

Safety and productivity are top priorities for contractors and industrial operations. Improving either makes a company more profitable and competitive. Technology advancements that can do both are important for every company to consider. HoistCam^TM industrial-grade video monitoring solutions can improve employees’ productivity and workplace safety in the construction industries. HoistCam also improves efficiency of operations and reduces job site accidents resulting in substantial cost savings to a contractor.

HoistCam™ is an integrated, wireless video system. The use of HoistCam eliminates blind lifts, blind spots and can share the live video with anyone, anywhere with solid security and easy control. …

Numerical And Experimental Studies On Coastal Marsh Erosion Under Hurricane Induced Wave And Current, Minhaz M. Shahriar

Doctoral Dissertations

Considering the past history and future risks of hurricanes in the USA, well understood storm protection plans are needed to shelter the important areas of the population and economy, especially within southeastern Louisiana. It is extensively assumed that marshes offer protection from hurricane though the degree of this protection is not well measured or understood due to the complex physics involved in this overall system. Moreover, marshes experience significant erosion while serving as a barrier for important areas. Consequently, a particular method to quantify the effects on marshes during a coastal hurricane period is necessary to mitigate major marsh loss. …

Recommended Selective Maintenance And Rehabilitation Treatment Approach For Air Force Primary Rigid Runway Pavement Systems, Christopher M. Twigg

Theses and Dissertations

The Air Force is facing the challenge to preserve the current inventory of 154 million square yards of paved airfield assets while at the same time reducing the budget by $36.2 billion between fiscal years 2015-2019. This research sought to determine a selective maintenance and rehabilitation treatment approach that allocates resources efficiently to preserve the degrading pavement assets in the financially constrained environment. Air Force pavement inspection reports from the past five years provided 4289 observed pavement distress data points for this research. The data was inputted into the pavement management software, PAVER, to calculate the Pavement Condition Index (PCI) …

Purdue Ect Report - Fourth Quarter 2016, Purdue Ect Team

ECT Fact Sheets Archive

Fourth Quarter 2016

This is a quarterly report from the Purdue ECT.

Practical Considerations In Determining Timber Pile Depth Using The Sonic Echo Method, Ali F. Jwary

Civil Engineering ETDs

The Federal Highway Administration indicates that about 85,000 bridges in the United States have no original contract documents with information about the type, depth, geometry and material of their foundations (FHWA, 2010). Furthermore, the National Bridge Inventory (NBI) provides information about 86,133 bridges nationwide that are rated as scour critical because of unknown foundation condition. In New Mexico, there are more than 281 bridges with unknown foundations, which are owned by the New Mexico Department of Transportation; 71 of these are timber bridges. These data indicate a serious problem that needs decisive action to assess the unknown bridge foundation characteristics …

Bicp Global Bim Study - Lessons For Ireland’S Bim Programme, Barry Mcauley, Alan Hore, Roger West

Reports

The Construction IT Alliance (CitA) has been promoting the benefits of digitisation in the construction and engineering industry in Ireland since its formation back in 2002. Whilst the Alliance has always strived to ensure that its members are exposed to a wide spectrum of contemporary digital tools and processes, the concept of Building Information Modelling (BIM) has dominated the focus of its activities over the past five years.

BIM can be described as a digital tool that facilitates everybody to better understand a building or structure through the use of a digital model which draws on a range of data …

Road Zipper™, Purdue Ect Team

ECT Fact Sheets Archive

Construction work zones are growing in number around the world. The natural aging of existing roadway infrastructure ensures that more and more maintenance and rehabilitation will be required. Work zones, by their very definition, create two major problems that must be addressed in some way: safety and mobility. In the United States, highway work zones are responsible for almost 25% of all non-recurring congestion and 10% of overall congestion. Vehicle accidents are more common in work zones, and traffic congestion through work zones on urban arterials and freeways is often considered to be “unavoidable." To address these issues, ROAD ZIPPER™ …

Influence Of Moisture Content Distribution In Soil On Pavement And Geothermal Energy, Md Adnan Khan

Doctoral Dissertations

Moisture content in soil has a great implication in engineering design, and it has been heavily investigated by soil engineers and scientists. If moisture content in expansive soil changes drastically, it will create significant volume change in the soil. If expansive soil is present in building foundation or pavement subgrade, it may result in structural failure. On the other hand, if sufficient moisture content is present in soil, it will increase the production of geothermal energy from the ground soil. This dissertation is an effort to understand the effects of moisture content on both expansive soils and geothermal energy that …

Site Specific Sinkhole Risk Assessment In Central Florida Using Cone Penetrometer Testing, Ryan Shamet

Electronic Theses and Dissertations

As Florida's population is expanding and greater fluctuations in groundwater levels are being recorded, Central Florida has been experiencing a higher frequency of sinkhole occurrences than ever before in recorded history. Sinkholes in Central Florida are formed by a combination of bedrock weathering and overburden soil erosion due to the groundwater recharge and are a part of Florida's past and future geology. The initial stage of a sinkhole is referred to as soil raveling and is the most effective time to perform soil improvement measures, such as grouting, to mitigate further expansion of a subterranean void. Subsurface exploration tests, commonly …

Air Injection As A Scour Countermeasure At Bridge Piers, Ravi Teja Reddy Tippireddy

Dissertations, Master's Theses and Master's Reports

Local scour is a major cause of concern for the stability of bridge piers and the safety of the public using the bridges. Structural countermeasures and flow-altering devices have been developed to deal with local scour. Many armoring structural countermeasures are very effective and efficient in clear water conditions but are susceptible to moving bed forms and leaching. The flow-altering devices are effective in both clear water conditions and moving bed forms, but are prone to clogging, less efficient in changing flow direction, etc. This study aims to reduce the local scour by injecting air in order to reduce the …

Evaluation Of Mechanical Parameters Of Contaminated Road Base And Railway Ballast, Prajwol Tamrakar

Open Access Theses & Dissertations

This Dissertation comprises two topics in the area of transportation geotechnics that focus on the evaluation of stiffness parameters of contaminated road base and railway ballast. The abstracts of these two studies are provided in the following two paragraphs.

The performance of a flexible pavement depends on the mechanical characteristics of its unbound granular base layer. The mechanical characteristics such as stiffness and deformation resistance depend on many factors such as the material gradation, fines content, moisture content, physical properties of coarse aggregate and more. The base materials are often contaminated by the excessive fines that is caused by improper …

Strength Property Variability In Microbial Induced Calcite Precipitation Soils, Jacob Fuller

UNF Graduate Theses and Dissertations

Microbial Induced Calcite Precipitation (MICP) is an attractive alternative for a variety geotechnical ground improvement practices commonly used today and has a variety of potential applications. This research focuses primarily on its use as a soil stabilization technique using the bacteria Sporosarcina Pasteurii and a single injection point percolation method adapted from previous research in granular soils. This method, and most published data, show an inherent variability in both physical and engineering properties due to the distribution of precipitated calcite within the specimen. The focus of this research is on the quantification of the variability in shear strength parameters induced …

Input Parameters In Discrete Element Modeling, Seyedali Yousefi

Civil Engineering ETDs

The discrete element method (DEM) is employed to study complex behaviors of particulate media. Input parameters may greatly affect the response of DEM models and should therefore be selected carefully. Scaling techniques are employed to enlarge prohibitively small time-steps. To study these techniques, dimensionless input parameters were defined. Responses of models in the dimensionless scale were invariant with choice of density, elastic modulus, and characteristic length if the dimensionless parameters were kept constant. Hence, density scaling is equivalent to use of a higher strain-rate, and stiffness scaling results in a higher strain-rate and an elevated stress state in the dimensionless …

Lucidpipe™ Power System, Purdue Ect Team

ECT Fact Sheets Archive

In most gravity fed water transmission pipelines, it is desired to reduce excess pressure head to prevent undue strain on a pipeline and lower the incidence of leaks. Normally this is done with pressure reducing valves that essentially burn off this excess pressure as heat. The LucidPipe™ system converts it to low cost electricity thereby removing unwanted pressure and generating energy at the same time - energy that can be put used behind the grid or put back on the grid. The LucidPipe™ system extracts a small percentage of pressure head providing nearly invisible operation allowing water operators to fulfill …

Soil Moduli Obtained From A Back Pressure Constant Rate Of Strain Bender Element Consolidation Apparatus, Yi Zhao

Graduate Theses and Dissertations

A back-pressure saturated, constant-rate-of-strain consolidation device was modified to incorporate bender elements (BP-CRS-BE) and thus allowed for shear wave measurements during consolidation tests. This newly fabricated system has many advantages over other previous or current devices: 1) it can be utilized not only for laboratory prepared soil samples but also for field sampled soils such as Shelby tube samples, and 2) continuous compression curves, and continuous values of vertical hydraulic conductivity and coefficient of consolidation can be acquired with a significant reduction in testing time. Soil modulus values such as shear modulus and constrained modulus are also able to be …

Effect Of Temperature On Deep Lined Circular Tunnels In Isotropic And Transversely Anisotropic Elastic Ground, Fei Tao

Open Access Theses

A tunnel is a passageway constructed through soil or rock. It is one of the most important underground structures and has been widely used in transportation. Much research has been done on tunnel performance and on the interaction between ground, excavation, liner installation and support. The work has provided a better understanding of the interplay that exists between deformations and stresses transferred from the ground to the support. Significant insight into the problem has been provided by closed-form analytical solutions. A number of analytical formulations have been obtained for underground openings and lined tunnels under different scenarios, namely shallow or …

Evaluating The Suitability Of Microbial Induced Calcite Precipitation Technique For Stabilizing Expansive Soils, Sikha Neupane

Boise State University Theses and Dissertations

Expansive soils, also known as swell-shrink soils have been a problem for civil infrastructures including roads and foundations from ancient times. The use of chemical additives such as cement and lime to stabilize expansive soils is a common practice among geotechnical engineers especially for lightly loaded structures. However, several occurrences of subgrade failures were observed after stabilizing with chemical additives hence engineers are in search of sustainable stabilization alternatives. Microbial Induced Calcite Precipitation (MICP) is gaining attention as an environmental friendly soil improvement technique. Several researchers have successfully tested its feasibility in mitigating liquefaction induced problems in sandy soils. This …

Evaluation Of Slope Stability Quantifying The Effect Of Vegetation, Roberto José Marín, Juan Pablo Osorio

Conference papers

The present study evaluates the shallow landslides susceptibility triggered by rainfall by means of multiple numerical simulations. The simulations integrate a transient rainfall infiltration model with an infinite slope stability model, both of them developed for unsaturated soils in a basin scale. TRIGRS’ infiltration model is used to calculate pore water pressure. The geotechnical model includes the evaluation of two parameters related to vegetation: root reinforcement and tree surcharge due to the weight of the vegetation. These simulations were carried out using multiple values of these parameters so that their behavior is analyzed for the topographic conditions of the watershed …

Post-Liquefaction Residual Strength Assessment Of The Las Palmas, Chile Tailings Failure, Tristan Reyes Gebhart

Master's Theses

Assessment of post-liquefaction residual strength is needed for the development of empirically-based, predictive correlations for earthquake engineering design. Previous practice commonly assigned negligible strengths to liquefied materials for engineering analysis, producing overly-conservative designs. Increasingly available case history data, and improved analytical tools have allowed for more accurate and less overly-conservative estimation of soil residual strength, improving empirical predictive models. This study provides a new case history to the limited suite of (approximately 30) liquefaction failure case histories available for post-liquefaction in-situ strength predictive correlations.

This case history documents the Las Palmas gold mine tailings dam failure, resulting from seismic-induced liquefaction …

Soil-Bentonite Slurry Trench Cutoff Wall Closeout Report, Daniel Ruffing

NSF Soil-Bentonite Slurry Trench Cutoff Wall Documents

Assessment report of the construction of a soil-bentonite slurry wall including milestone dates, work description, and quality control.

Correlating Interlaminar Fatigue Fracture Behavior To Nde Parameters In Carbon/Epoxy Composites Containing Voids And Delamination, Issa Hakim, Norbert Meyendorf, Steven L. Donaldson, René Laquai, David Walter, Bernd Müller, Paul Graja

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Carbon fiber composites have been increasingly used in aerospace, military, sports, automotive and other fields due to their excellent properties, including high specific strength, high specific modulus, corrosion resistance, fatigue resistance, and low thermal expansion coefficient. Delamination, or interlaminar fracture, is a serious failure mode leading to a loss in composite stiffness and strength. Manufacturing process defects such as voids degrade the fatigue life and delamination resistance of the composite. This study investigates the effect of voids on fatigue interlaminar fracture behavior of carbon fiber composites. Samples with different vacuum levels: 0%, 50% and 100% were fabricated by varying the …

Ncma Groundwater Model Using Usgs Modflow-2005/Pest, Brian Matthew Wallace

Master's Theses

A numerical model for the NCMA aquifer complex is presented. The objective of the study is to develop a numerical groundwater model for the NCMA aquifer system to enhance the understanding of subsurface groundwater flow. Infiltration, streamflow, pumping, and return flows are implemented to characterize the aquifer complex over time. The numerical model is calibrated to municipal and monitoring well data, average monthly water balances, and hydraulic contours. Transient aquifer inflows and outflows are assessed in the results of the study and are compared to balance terms from previous studies. The 2007 Todd Engineers Study subsurface inflows and outflows generate …

Validation Of An Internal Camera Based Volume Determination System For Triaxial Testing, Leah D. Miramontes

Civil Engineering Undergraduate Honors Theses

Accurate strain and volume measurements are critical to phase relationships and strength determination for saturated and unsaturated soils. In recent years, laboratory-based photographic techniques of monitoring soil specimens have become more common. These techniques have been used to reconstruct 3D models and to determine strain and volumetric changes of triaxial specimens. A new technique that utilized digital photographs of the soil specimen, captured from within a triaxial testing cell, was utilized. Photographs were processed using photogrammetry software to reconstruct 3D models of the soil specimens. By placing camera equipment within the cell, the technique eliminated the need to account for …

Full Depth Reclamation Of Aviation Pavement, Michael W. Buening

Purdue Road School

Full depth reclamation (FDR) has been utilized multiple times in recent years for airport and roadway pavement rehabilitation. The presentation will review FDR and its use as a treatment for aviation pavements.

Wildcat Bridge - I-65 Artesion Well/Geotechnical/Structural, Anne Rearick, Jeremy Hunter, Silas Nichols, Mir Zaheer

Purdue Road School

In this session we will discuss the emergency design and repair of the I-65 bridge over Wildcat Creek in Tippecanoe County during the summer of 2015 that closed I-65 northbound.

Storm Damage - Murphy's Law, Dale Sedler, Mark Bailey

Purdue Road School

Examination of a disastrous event that required 4 coinciding occurrences happening that individually would likely have resulted in minor or no damage.

Full-Scale Shake Table Cyclic Simple Shear Testing Of Liquefiable Soil, Jasper Stanford Jacobs

Master's Theses

This research consists of full-scale shake table tests to investigate liquefaction of sandy soils. Consideration of the potential and consequences of liquefaction is critical to the performance of any structure built in locations of high seismicity underlain by saturated granular materials as it is the leading cause of damage associated with ground failure. In certain cases the financial losses associated with liquefaction can significantly impact the financial future of an entire region.

Most liquefaction triggering studies are performed in the field where liquefaction has been previously observed, or in tabletop laboratory testing. The study detailed herein is a controlled laboratory …