Civil and Environmental Engineering Commons^™

Mechanical Alloying-Assisted Coating Of Fe–Al Powders On Steel Substrate, Alfian Noviyanto, Sri Harjanto, Wahyu Bambang Widayatno, Agus Sukarto Wismogroho, Muhamad Ikhlasul Amal, Nurul Taufiqu Rochman

Makara Journal of Technology

The coating layer of Fe–Al powders on the steel substrate was prepared by mechanical alloying at room temperature. Fe, Al, and the steel substrates were milled with high-energy ball milling for 32 h with a ball-to-powder ratio of 8 in an argon atmosphere to prevent oxidation during milling. Although mechanical alloying was performed for 32 h, no new phases were observed after mechanical alloying, as analyzed by X-ray diffraction. However, the crystallite size of the milled powders for 32 h decreased by factor two compared with the initial powders. Scanning electron micrographs showed that the coating layers formed >8 h …

Performance Of Free-Space Optical Communication Systems Using Optical Amplifiers Under Amplify-Forward And Amplify-Received Configurations, Ucuk Darusalam, Arockia Bazil Raj, Fitri Yuli Zulkifli, Purnomo Sidi Priambodo, Eko Tjipto Rahardjo

Makara Journal of Technology

With the growth of digital technology in the stage of industrial revolution 4.0, the demand for broadcasting large amounts of information to last mile users has increased. Free-space optical (FSO) communication is one of the telecommunication platforms that has shown immense potential in meeting the demand for information broadcasting. In this work, the performance of FSO communication based on wavelength division multiplexing with a data rate of 80 Gbps is investigated through simulations. The configuration of optical amplifiers in the FSO system is set up on the basis of the amplify-forward and amplify-received configurations to expand the network. The investigation …

Iso 9001:2015 Risk-Based Thinking: A Framework Using Fuzzy-Support Vector Machine, Ralph Sherwin A. Corpuz

Makara Journal of Technology

Risk-based thinking (RBT) is one of the distinct new features of the International Organization for Standardization 9001:2015. Interestingly, the standard does not prescribe any tools. Hence, organizations are puzzled as to the extent of conformance. Some organizations have adopted formal tools. However, these tools seem insufficient in linking the standard into an evidence-based decision support system. To resolve gaps in RBT implementation, this paper proposes a framework based on fuzzy inference system (FIS) and support vector machine (SVM) to automate risk analysis and evaluation, proposal and verification of action plans, and prediction of the feasibility of risks and opportunities according …

An Investigation Into The Effects Of Fly Ash On Freeze-Thaw Durability Prediction, Yancy Schrader

Graduate Theses and Dissertations

Air is purposefully entrained into concrete primarily to improve resistance to freeze-thaw deterioration while saturated with water. Air entraining admixtures (AEAs) are chemical admixtures designed to entrain air into the concrete to provide adequate resistance to the effects of freezing and thawing. One of the challenges associated with air entrainment in concrete is the interaction of an AEA with supplementary cementitious materials present in the concrete, particularly fly ash. Fly ash is a by-product of the coal fired electrical generation industry, and often contains residual unburned carbon and other components that can increase the AEA demand of a particular concrete …

Effect Of Citric Acid On Slump, Compressive Strength, And Setting Time Of Belitic Calcium Sulfoaluminate Concrete, Israel Aguilar Rosero

Graduate Theses and Dissertations

Belitic calcium sulfoaluminate (BCSA) cement has well established advantages related to fast setting time, fast strength gain, long-term strengths, shrinkage, and sustainability. Due to its fast setting and hardening, this type of cement has historically been used to repair concrete structures, highways, and runways. This work provides much needed guidance on establishing mix design criteria for BCSA cement. Guidance is also given on the effects of set retarders on strength, slump, and setting times. Citric acid and a phosphonic acid-based admixture were tested as retarders for different concrete mixtures. Three studies were performed. In the slump study five different water …

Leveraging Biomimicry And Additive Manufacturing To Improve Load Transfer In Brittle Materials, Ana Paula Bernardo

Graduate Theses and Dissertations

With the emergence of Additive Manufacturing (i.e., 3D printing) in construction, new strategically designed shapes can be created to improve load transfer through structural members and foundations. Cross-sections can be optimized to carry load using less material, or even using weaker constituent materials, like soils, which are cheap and abundant. The goal of this research is to investigate the benefits of using cellular patterns which leverage biomimicry in civil engineering applications, since nature has perfectly engineered materials and patterns which carry loads with the least amount of material possible. Most of the periodic cellular work to date has focused on …

Application Of Percentage Within Limits Concepts On A Balanced Mix Design Of Asphalt Mixtures, Elvis Alexander Castillo Camarena

Graduate Theses and Dissertations

Many agencies have incorporated rutting, and more recently cracking, laboratory test requirements in the design process of asphalt mixtures. The objective of each additional specification is to produce a balance between the stability and durability of the final product. Although a performance-engineered mixture design (PEMD), denoted here as a balanced mix design (BMD), offers compelling benefits, there is concern regarding the compatibility of the BMD with current construction practices. The objective of this work is to correlate a BMD method with realistic binder content construction tolerances by applying the concepts of a percent-within-limits (PWL) approach to field QC/QA. First, Chapter …

Exploring The Variability In The Gray Scale Imaging Process Of Asphalt Samples, David Oluwawade Olatunji

Civil Engineering Undergraduate Honors Theses

Gray scale image analysis is a powerful tool for testing asphalt concrete materials. From material composition to surface properties, gray scale analysis has shown evidence as a non-invasive way to obtain information from asphalt samples. Casillas et al. used a gray scale analysis to measure the Representative Volume Element of three asphalt sample geometries to understand the minimum size at which an asphalt sample is representative of a larger homogeneous mixture [1]. While the gray scale analysis used in this experiment yielded results, there were unknown factors in the image capturing process. Particularly, not much was known about the effect …

Effect Of Landfill Leachates On Some Water Quality Indicators Of Selected Surface Water And Groundwater At Ilokun, Ado-Ekiti, Nigeria, Olorunwa Omofunmi, Adesola Satimehin, Abraham Oloye, Okwunna Umego

Makara Journal of Technology

This study was conducted to examine the impact of dumpsites on the quality of groundwater and surface water. The water samples and leachates were collected from dumpsites in respective zones. The physicochemical properties of the samples were examined and determined in accordance with the standards of the American Public Health Association. Results indicated that the groundwater and surface water that are close to the dumpsites have an electrical conductivity of 385 and 245 Sd/cm, total dissolved solids of 168 and 128 mg/L, a turbidity of 4.6 and 22 NTU, a total alkalinity of 103 and 50 mg/L, a total hardness …

Microstrip Filters: A Review Of Different Filter Designs Used In Ultrawide Band Technology, Hussain Bohra, Giriraj Prajapati

Makara Journal of Technology

In this study, optimization techniques applied in designing microstrip bandpass ultra-wideband (UWB) filters are presented. Optimization based on various defected ground structure techniques, resonator designs, and type of dielectric materials is discussed. Microstrip bandpass filters implemented at UWB frequency bands used in wireless communication systems have key features to control frequency response in passband and stopband. Optimization techniques are studied to attain optimum performance of bandpass microstrip filters to ensure minimum insertion loss, high selectivity, compactness, sharp transitions at cut-off frequencies, high return loss, and excellent linearity. Extensive study shows that proper selection of fabrication techniques and type of material …

Effect Of Catholyte Concentration On Current Production During Chocolate Industry Wastewater Treatment By A Microbial Fuel Cell, Diana Rahayuning Wulan, Suprihanto Notodarmojo

Makara Journal of Technology

Microbial fuel cells (MFCs) use bacteria as a catalyst to oxidize organic and/or inorganic substrates and produce electric currents. Wastewater could function as an electron donor in the anode chamber and, thus, represents a very promising energy source. Catholytes, as electron acceptors, influence power production in MFCs by increasing the availability of electrons. The present research aims to determine the influence of catholyte concentration on current production in an aerobic two-chamber MFC. Aerobic treatment was carried out in the two-chamber MFC operated in an incubator at 37  1 °C with and without aeration in the cathode chamber. Wastewater from …

Evaluation Of Il-17a And Il-17f Gene Expression In Peripheral Blood Mononuclear Cells In Different Clinical Stages Of Chronic Hepatitis B Infection In An Iranian Population, Tannaz Akbari Kolagar, Seyed Reza Mohebbi, Fatemeh Ashrafi, Shahrzad Shoraka, Hamid Asadzadeh Aghdaei, Mohammad Reza Zali

Makara Journal of Technology

Hepatitis B virus (HBV) infection is one of the main causes of liver damage, which can also lead to chronic hepatitis B (CHB) infection. More than 240 million individuals worldwide are chronic carriers of HBV. Among individuals with CHB who are untreated, approximately 15% – 40% will progress to liver cirrhosis or cancer. The interactions between HBV and host immune response play significant roles in the progression of CHB. CHB can be generally divided into four different clinical phases: immune tolerance (IT), immune clearance, inactive carrier, and Hepatitis B surface antigen (HBsAg)-negative reactivation phase (ENEG). Many studies showed that interleukins …

Redesign Of Product Packaging With Kansei Engineering: Empirical Study On Small-Medium Enterprises In Indonesia, Amalia Suzianti, A. Aldianto

Makara Journal of Technology

Small-medium enterprises (SMEs) in Indonesia have been proven to be one of the important pillars of the national economy. Unfortunately, some problems hinder their development, and one of the critical problems is the quality of product packaging. The packages of SME products are considered poor, dirty, and unattractive. Packaging problem is one of the factors why consumers are less interested in buying and why SME products always lose in the competition with other products. This study discusses how to employ Kansei engineering to design better SME product packaging with a focus on psychological (affective) aspects. This research concludes that there …

Effect Of Pvdf-Ca Ratio On Electrospun Membrane For Water–Oil Filtration Application, Mohamad Haziq Alias, Izan Izwan Misnon, Rajan Jose

Makara Journal of Technology

Oil spillage and generation of industrial water–oil wastewater mixture ignite a focus on filtration technology. Electrospinning technique provides a versatile route in producing tunable diameter and pores in nanofiber filtration membrane development. In this work, polyvinylidene difluoride (PVDF) and cellulose acetate (CA) electrospun membrane at different concentration ratios were synthesized for water–oil filtration application. The polymeric solutions were characterized using viscometer and conductivity testing, whereas the membranes were analyzed using contact angle, tensile test, scanning electron microscopy (SEM), and filtration testing of oil (dichloromethane). Conductivity test showed a decreased conductivity along with decrement of CA ratio in the polymeric solution. …

Performance-Shaping Factors Of Personnel Performing Evacuation And Escape On Offshore Installations In Tropical, Norafneeza Norazahar, Nur Azizah Arryanie Morshidi, Arshad Ahmad, Wijayanuddin Mohd Ali

Makara Journal of Technology

Performance-shaping factors (PSFs) are used to address the strengths and weaknesses of workers performing escape and evacuation activities. These PSFs are time, environmental factors as stressors, complexity of activities, experiences and training, interaction between workers and emergency equipment, workers’ physical conditions, and procedures. This paper presents a survey work on fitness for the duty of workers performing basic offshore survival and emergency response training. The training provides credible scenarios of escape and evacuation in case of an emergency of offshore installations in tropical waters. The survey is conducted among participants of the tropical basic offshore safety induction & emergency training …

Development Of Zeolitic Imidazolate Frameworks For Enhancing Post-Combustion Co2 Capture, Dustin Lee

Master's Theses

Post-combustion CO₂ capture is a promising approach for complementing other strategies to mitigate climate change. Liquid absorption is currently used to capture CO₂ from post-combustion flue gases. However, the high energy cost required to regenerate the liquid absorbents is a major drawback for this process. As a result, solid sorbents have been investigated extensively in recent years as alternative media to capture CO₂ from flue gases. For example, metal organic frameworks (MOFs) are nanoporous materials that have high surface areas, large pore volumes, and flexible designs. A large number of MOFs, however, suffer from 1) low CO …

Numerical Study Of Paraffin Wax Melting In A Cavity With A Gradient Of Hot Wall Inclination, Agus Dwi Korawan

Makara Journal of Technology

The melting of a phase change material (PCM) in a cavity with a gradient of hot wall inclination was simulated numerically using five models, namely, Model-A, Model-B, Model-C, Model-D, and Model-E with gradients of −2, −4, ∞, 4, and 2, respectively. The PCM was paraffin wax, which was melted using an enthalpy porosity technique with a pressure-based method. Model-A was found to be the best model. For the completion of the melting process, the models were assigned with the liquid fraction of 1. Model-A required the shortest time, followed by Model-B, Model-C, Model-E, and Model-D, respectively. Compared with Model-C, Model-A …

Development Of Bragg Fiber Sensor For Corrosion Detection, Cai Hui Tan

Student Works (2020-2029)

Steel corrosion has posed one of the major structural defects in the civil society today. Conventional methods for corrosion monitoring involve high maintenance cost and destructive methods with low accuracy. Recently, Fiber Bragg gratings (FBG) sensor with its high sensitivity in measuring strain and temperature have been widely studied and used in structural health monitoring (SHM). A non-destructive corrosion detection approach based on FBG sensors was developed and tested to monitor corrosion in this research work. The principle of FBG sensing is based on Bragg wavelength shifts that from the corrosion process that induced strain on the FBG due to …

Engineering Properties And Microstructural Characteristics Of Cement And Geopolymer Based Mortars Using Nontraditional Supplementary Cementitious Materials, Mathialagan Sumesh

Student Works (2020-2029)

The concrete repair and rehabilitation industry grows rapidly due to deterioration, damage and defects in concrete structures. For various reasons, the concrete construction industry is not sustainable; because it consumes huge quantities of virgin materials, the usage of Portland cement as prime binder. The production of cement is a major contributor to greenhouse gas emissions. In addition, the high cost of commercial repair material. Therefore, it is necessary to develop cost-effective alternative repair materials for concrete repairs. There have been many standard repair materials available in the market, which are costly and not affordable to common people. However, research works …

Automatic Delamination Segmentation For Bridge Deck Based On Encoder-Decoder Deep Learning Through Uav-Based Thermography, Chongsheng Cheng, Zhexiong Shang, Zhigang Shen

Department of Construction Engineering and Management: Faculty Publications

Concrete deck delamination often demonstrates strong variations in size, shape, and temperature distribution under the influences of outdoor weather conditions. The strong variations create challenges for pure analytical solutions in infrared image segmentation of delaminated areas. The recently developed supervised deep learning approach demonstrated the potentials in achieving automatic segmentation of RGB images. However, its effectiveness in segmenting thermal images remains under-explored. The main challenge lies in the development of specific models and the generation of a large range of labeled infrared images for training. To address this challenge, a customized deep learning model based on encoder-decoder architecture is proposed …

Analysis Of Burning Wood In The Transient State And The Application To Structural Design, Roberta Veliz, Kimberly Guzman

Architectural Engineering

Determining the extent of the contribution of exposed timber on compartment fire dynamics in open floor plans is a complex process. Designers traditionally used compartmentalization design methods which create spaces where flashover is likely, given the fuel load and ventilation conditions. However, due to the large geometric dimensions and spread of fuel, fires in open floor plans are more likely to remain as localized or traveling fires. As such, an understanding of not only ignition potential but also flame spread is critical to characterizing the contribution of exposed timber. An integral step in characterizing the potential contribution is through an …

Prediction Of Flotation Efficiency Of Metal Sulfides Using An Original Hybrid Machine Learning Model, Rachel Cook, Keitumetse Cathrine Monyake, Muhammad Badar Hayat, Aditya Kumar, Lana Alagha

Materials Science and Engineering Faculty Research & Creative Works

Froth flotation process is extensively used for selective separation of base metal sulfides from uneconomic mineral resources. Reliable prediction of process outcomes (metal recovery and grade) is vital to ensure peak performance. This work employs an innovative hybrid machine learning (ML) model—constructed by combining the random forest model and the firefly algorithm—to predict froth flotation efficiency of galena and chalcopyrite in relation to various experimental process parameters. The hybrid model's prediction performance was rigorously evaluated and compared against four different standalone ML models. The outcomes of this study illustrate that the hybrid ML model has the prediction ability to process …

Optimization And Longevity Of Functionalized Multi-Walled Carbon Nanotube-Enabled Membranes For Water Treatment, Madeleine Michael Isabella White

Master's Theses

Water scarcity is a growing concern at the global scale. Large scale water reuse is growing both in necessity and popularity. Before water reuse can be performed efficiently on a large scale or be used for potable supply, even indirectly, contaminants of emerging concern (CECs) will need to be treated at the full scale. Advanced oxidation processes (AOPs) are a form of advanced water treatment capable of treating a wide range of CECs. This study contributes to the growing field of AOPs and more specifically AOPs using ozone combined with functionalized multi-walled carbon nanotubes (MWCNTs). Ozonation of MWCNTs has been …

Numerical And Analytical Methods To Predict Behavior Of Reinforced Ductile Concrete Composites, Mandeep Pokhrel

Dissertations

Structural components constructed with ductile concrete composites, such as high-performance fiber-reinforced cementitious composites (HPFRCC), are known to perform exceptionally well under extreme mechanical and environmental loading conditions compared to traditional concrete. HPFRCC flexural components exhibit enhanced performance in terms of displacement ductility, energy dissipation capacity, and damage tolerance capacity. However, recent research suggests that the flexural behavior of reinforced HPFRCCs in terms of crack progression, reinforcement plasticity, and failure mechanism is significantly different than conventional reinforced concrete. Specifically, the failure mode of flexural members is found to be predominantly through the fracture of longitudinal reinforcement rather than compression crushing of …

The Impact Of Conversion On The Durability Of Calcium Aluminate Cement Concrete Systems, Marwa Mohsen Korayem

Dissertations

The deterioration of infrastructure in North America has resulted in a significant need for concrete repair materials that can be used to maintain service life of these structures. Hydraulic cement based rapid repair materials can be used to repair pavement and bridge deterioration with minimal impact on economic activities such as freight handling or public transportation. While there are many options for use in repair situations, calcium aluminate cements have become more popular recently, particularly in situations where repairs must be completed rapidly.

Calcium aluminate cement (CAC) is a cement characterized by its rapid strength gain, even at low temperatures …

Development Of Multi-Axial Fatigue Retrofits For Lock Gate Components, Logan Verkamp

Graduate Theses and Dissertations

Lock gates are essential infrastructure components to the United State (US) supply chain. They create large cost savings and environmental benefits when compared with traditional methods of transport (freight and rail). Because of the large quantity of goods and dependence on these shipping chains, the US economy can be drastically affected by an unexpected gate closure. Unfortunately, many lock gates within the US have reached or exceeded their designed life. Due to the intensity of cyclic loads and the environment, fatigue cracks have become a prominent issue. Developed cracks near the pintle region (a joint which the gate rotates and …

Spherical Cavity Expansion Approach For The Study Of Rigid-Penetrator’S Impact Problems, Mario Buchely, Alejandro Marañon

Materials Science and Engineering Faculty Research & Creative Works

In recent years, Spherical Cavity Expansion (SCE) theory has been extensively utilized to model dynamic deformation processes related to indentation and penetration problems in many fields. In this review, the SCE theory is introduced by explaining the different mathematical features of this theory, its solution, and a potential application to model the penetration of a rigid penetrator into a deformable target. First, a chronologically literature review of the most common models used to study this kind of penetration problems is introduced, focusing on the SCE theory. Then, the engineering model of penetration is presented using the SCE approach. The model …

Pollution Prevention Via Recovery Of Cerium (Iv) Oxide In Optics Company, Eugene Park, William Gallagher, Sydor Optics, Flint Creek Resources

Articles

Pollution prevention methods were applied at an optics manufacturer in an effort to improve recovery of a valuable polishing component, cerium oxide (ceria), 77% of which was lost to dragout and sewer discharge. Centrifugation and microfiltratiion were evaluated to develop a process that would increase recovery of used ceria, which would then be sent back to the ceria supplier for reclamation and reuse. Full-scale implementation included a high-speed centrifuge that operates continuously with a microfiltration system through recirculation in a single process tank. Sydor Optics has improved ceria recovery from 23% to 48%, saving thousands of dollars annually.

Correction To: Recommendations Of Rilem Tc 260-Rsc For Using Superabsorbent Polymers (Sap) For Improving Freeze–Thaw Resistance Of Cement-Based Materials (Materials And Structures, (2019), 52, 4, (75), 10.1617/S11527-019-1375-4), Viktor Mechtcherine, Christof Schröfl, Michaela Reichardt, Agnieszka J. Klemm, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Agnieszka J. Klemm is affiliated to Glasgow Caledonian University, Glasgow, UK.

Estimation Of Lubrication Layer Thickness And Composition Through Reverse Engineering Of Interface Rheometry Tests, Alexis Salinas, Dimitri Feys

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

During concrete pumping, a lubrication layer is formed near the pipe wall. Extensive research has been performed on measuring and modeling the properties of this layer and using these values to predict pumping pressures. However, there are numerous discussions in the literature about the composition and thickness of this layer: can it be considered mortar, a micromortar, or is it cement paste? In this paper, possible solutions for the thickness and composition of the lubrication layer are derived from interface rheometry tests. It is assumed that the lubrication layer is composed of one or more concentric layers of paste or …