Chemical Engineering Commons^™

A Case Study On The Design And Optimization Of An Ethylbenzene Production Plant, William Grafton Peaster

Honors Theses

This thesis will detail two goals of my capstone design project. The first goal is to simulate a given base case of a vapor phase reaction ethylbenzene production facility in PRO/II simulation software and discretely optimize the process in order to increase the profitability of the plant. The second goal is to develop a base case process flow diagram, stream tables, utility tables, and equipment tables for an ethylbenzene facility with liquid phase reactions. The base case simulation and optimization is a group task with my assigned group members in Ch E 451. The first part of this study looks …

Process Design And Optimization: Analysis Of An Ethylbenzene Production Plant, Jonathan Butler Vanveckhoven

Honors Theses

This thesis will cover the steps I took to evaluate an ethylbenzene production plant. I, along with my senior design team, was first tasked with optimizing a vapor-phase ethylbenzene production plant based off of a given base case. Our team was able to improve the net present value of the plant from -$4.8 million to $70.4 million through discrete optimization. After the vapor-phase plant was evaluated, I was tasked with creating a base case, liquid-phase ethylbenzene production plant. I explain the theory behind process flow diagram development, then explain how I produced the process flow diagram and stream table for …

Solvent And Concentration Effects Governing The Hierarchical Organization Of Asphaltenes: A Small-Angle X-Ray Scattering Study, Hasan Rejoanur Rahman

Open Access Theses & Dissertations

Asphaltenes are a group of planar molecules found in crude oil and are prone to aggregation which often causes blockage of pipes along the oil production stream resulting a huge economic downside. In an effort to understand the hierarchical organization of asphaltene in different solvents and concentrations, the solution structure of various asphaltene solutions were studied using small-angle x-ray scattering (SAXS). Solvents were chosen based on miscibility maps. Such maps are generated on the critical value of the solubility parameter difference between asphaltenes or asphaltene components, and a range of solvents. The critical factors that affect asphaltene and asphaltene component …

Design, Synthesis, And Characterization Of Monometallic And Bimetallic Catalysts, Sonia Eskandari

Theses and Dissertations

Supported catalysts are used extensively in a variety of heterogeneously catalyzed reactions for industrial processes. Techniques for preparing supported noble metal catalysts are typically chosen to achieve high metal dispersions in order to obtain high activity for a given metal loading. Enhancing the catalytic performance of heterogeneous catalysts can be done by increasing active site count as well as modification of the physico-chemical characteristics of the catalyst material. For supported metal nanoparticles this can be achieved by decreasing particle size, thus increasing dispersion or metal utilization on the surface of the particles, while modification of metal properties can be attained …

Sequence Effects On The Glass Transition Temperature, William Drayer

Williams Honors College, Honors Research Projects

Lithium ion batteries are widely used for the energy needs of portable electronic devices. Unfortunately, current liquid organic solvents used as the electrolytic portion of the battery have low thermal stability, resulting in batteries that may combust upon failure. This flammability can be attributed to the configurational strain in cyclic organic electrolytes. Due to the lack of configurational strain in a flexible polymer chain, designing polymer electrolytes for use in lithium ion batteries may result in a safer battery due to their lower flammability in comparison to traditional liquid organic electrolytes. From the perspective of an electrolytic polymer, lowering the …

Development Of Entubulation Strategies For Treating Central Nervous System Injuries, Ivy Brosch

Williams Honors College, Honors Research Projects

According to the McKnight Brain Institute, at least 10,000 people annually in the USA suffer from a central nervous system (CNS) injury. These injuries can cause serve disabilities including paralysis. Due to the complexity of the spinal cord, it is common that potential CNS treatments are first applied to an optic nerve crush (ONC) model in rats. Two proposed treatments were employed; one where nerve growth factor (NGF) was immobilized to a chitosan substrate to stimulate axonal regeneration, and the other using pentadecafluorooctanoyl chloride modified methacrylamide chitosan (MAC(Ali15)F) hydrogel to enhance local oxygenation. The two different treatments were formed into …

Environmentally Friendly Alternates To Chemlok 233 Adhesive Cement, Madeline M. Busch

Williams Honors College, Honors Research Projects

The purpose of this project was to determine and qualify suitable, environmentally friendly replacement(s) for the current Chemlok 233 adhesive cement used by UTC Aerospace. Chemlok 233 was discontinued by the manufacturer based on the availability of a hazardous solvent (Trichloroethylene – TCE). The Chemlok 233 Control and four Experimental alternates with similar properties were lab tested for adhesion strength in various UTC proprietary cement specifications. The specifications modeled Chemlok’s uses in the construction of pneumatic de-icers. Chemlok 2332 was selected for use in Cement A, and Chemlok 402 was chosen for use in Cement B based on their highest …

Correlation Of Electrospun Polyvinylpyrrolidone Fiber Mat Thickness With Basis Weight, Fiber Diameter, Pore Size Distribution, And Air Permeability, Leah Mcpherson

Williams Honors College, Honors Research Projects

This project developed correlations between electrospun polyvinylpyrrolidone fiber mat thickness, basis weight, fiber diameter, pore size, and air permeability. The hypotheses were thinner fibers produce thicker mats, pore size decreases with fiber diameter, pore size and permeability decrease as basis weight increases. Project results could be used for modeling or quality control purposes.

Fiber diameter distributions were analyzed using a Scanning Electron Microscope and FibraQuant 1.3 software. Four conditions were chosen for further study: 0.284 ± 0.104 µm, 0.379 ± 0.128 µm, 0.520 ± 0.138 µm, and 0.733 ± 0.177 µm. Lower PVP concentrations produced thinner fibers.

Sample thickness (nm) …

Vanadium Redox Flow Batteries: Design And Experimentation, Matthew George

Williams Honors College, Honors Research Projects

Vanadium flow batteries (VFB) are a type of battery that has potential as a grid-scale energy storage solution. An original design for a lab-scale VFB is presented herein, along with a procedure for electrolyte preparation from V₂O₅ using oxalic acid. The flow cell is constructed from Delrin, Teflon, Kynar, Santoprene, Nafion, graphite plate, and porous carbon. Two diaphragm pumps along with polyethylene, PVC, and Santoprene tubing are used. The active area is 58 cm². The battery was charged using a DC power supply at a constant current of 4 A with corresponding initial voltage of …

Analyzing The Spectral Energy Cascade In Turbulent Channel Flow, João Rodrigo Andrade, Ramon Silva Martins, Gilmar Mompean, Laurent Thais, Thomas B. Gatski

CCPO Publications

An analysis of the spectral turbulent kinetic energy budget in a fully developed turbulent plane channel flow is performed. Direct numerical simulation data are evaluated at friction Reynolds numbers Re_τ of 180 and 1000. The analysis is focused on the influence of the Reynolds number on the spectral cascade of energy and the corresponding energy cascade in physical space in the presence of inhomogeneity and anisotropy. The turbulent kinetic energy distribution is compared for both Reynolds numbers, and the relevant characteristics of the energy transfer process in a wall-bounded turbulent flow are described. Differences in energy cascade are noted …

A Preliminary Evaluation Of The Ability Of Keratotic Tissue To Act As A Prognostic Indicator Of Hip Fracture Risk, J. Renwick Beattie, Diane Feskanich, M. Clare Caraher, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Studies have shown that Raman spectroscopic analysis of fingernail clippings can help differentiate between post-menopausal women who have and who have not suffered a fracture. However, all studies to date have been retrospective in nature, comparing the proteins in nails sourced from women, post-fracture. The objective of this study was to investigate the potential of a prospective test for hip fracture based on spectroscopic analysis of nail tissue. Archived toenail samples from post-menopausal women aged 50 to 63 years in the Nurses' Health Study were obtained and analysed by Raman spectroscopy. Nails were matched case-controls sourced from 161 women; 82 …

An Analysis Of Common Drill Stem Vibration Models, Mohammed F. Al Dushaishi, Runar Nygaard, Daniel S. Stutts

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Excessive drill stem (DS) vibration while rotary drilling of oil and gas wells causes damages to drill bits and bottom hole assemblies (BHAs). In an attempt to mitigate DS vibrations, theoretical modeling of DS dynamics is used to predict severe vibration conditions. To construct the model, decisions have to be made on which beam theory to be used, how to implement forces acting on the DS, and the geometry of the DS. The objective of this paper is to emphasize the effect of these assumptions on DS vibration behavior under different, yet realistic, drilling conditions. The nonlinear equations of motion …

Miscible Gases Based Eor In Unconventional Liquids Rich Reservoirs: What We Can Learn, Dheiaa Alfarge, Mortadha Alsaba, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Over the last decade, Unconventional Liquids Rich Reservoirs (ULR) have become the main target for oil and gas investors as conventional formations started to deplete and diminish in numbers. These unconventional plays have a huge oil reserve; however, the primary oil recovery factor is predicted to be less than 10%. Unconventional Improved Oil Recovery (UIOR) techniques are still a new concept in the oil industry since there is no commercial project reported for any IOR technique yet. Miscible gas based EOR technique might be the most potential strategy to improve oil recovery in such complex plays. In this study, a …

Advanced Ion Management To Improve Oil Recovery In Oil-Wet Carbonate-Sandstone Composite Reservoirs, Ali K. Alhuraishawy, Baojun Bai, Mingzhen Wei, Waleed H. Al-Bazzaz

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Waterflooding with different ionic composition called advanced ion management which play a role with ionic composition of injected water to enhance the oil production. In the last decade, many studies pointed out that the composition of injected water could changes rock wettability during waterflooding. The main purpose of this study is to evaluate the effects of SO4 and low salinity water on improving oil recovery in oil-wet carbonate reservoirs. Sulfate ion concentration, low salinity water, rock composition, porosity, and permeability were examined using a designed model. Typical seawater, increase SO₄, two and three times in the seawater, and …

New Insights Of Low Salinity Water Flooding In Low Permeability-Low Porosity Clay Rich Sandstone Reservoir, Ali K. Alhuraishawy, Baojun Bai, Mingzhen Wei, Waleed H. Al-Bazzaz

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

One of the EOR technologies is low-salinity water flooding (LSWF) is an EOR method that operates at a lower cost than other EOR methods, which makes it a preferred area of interest for oil industry economists, who continue to call for EOR costs to come down. The aim is to minimize the possible cost to recover as much oil as possible. The performance of low salinity waterflooding in decreasing residual oil saturation in low permeability-porosity clay-rich sandstone reservoir. Porosity test, core flooding test, XRD and scanning electron microscopy (SEM) tests were achieved in this study. Salinity effect on the porosity, …

Application Of Integrated Reservoir Geomechanics For Well Planning Of High-Angled Wells In A Mature Oil Field, Ahmed K. Abbas, Ralph E. Flori, Yousif M.B. Al-Asadi, Mortadha Alsaba, Nasser A. Al-Hamad

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Zubair oil reservoir has a significant potential to contribute to the petroleum supply in Iraq. Drilling highly deviated wells is a commonly used approach to enhance the production in mature fields. Drilling these wells in the Zubair Formation has been a challenge due to severe wellbore instability issues. This study presents how integrated reservoir geomechanics was used for efficient well planning and safe drilling of nearly horizontal wells (75° Inclination) through Zubair depleted sandstone oil reservoir. In this study, an integrated workflow was implemented mainly to build a geomechanical model using offset well data. The in-situ principal stresses and their …

Using Managed Pressure Drilling To Reduce Stuck Pipe Problem, Ethar H.K. Alkamil, Husam R. Abbood, Ralph E. Flori, George Medley, Sagar Nauduri, Mortadha Alsaba

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Differences between mud pressure in a wellbore and pore pressure in high permeability rocks can lead to differential sticking, particularly when drilling deviated wells and encountering mud losses. Several solutions, all challenging, can be used to address this problem, where the conventional mitigation method of managing the mud weight (MW) is often used. However, managed pressure drilling (MPD) offers a promising solution with a positive risk-adjusted cost and other benefits. Wells in the E oilfield in southern Iraq are typically drilled overbalanced and therefore often experience a high percentage of non-productive time (NPT) due to differential sticking. This study evaluates …

A Novel Ultra-Low Interfacial Tension Nanofluid For Enhanced Oil Recovery In Super-Low Permeability Reservoirs, Derong Xu, Baojun Bai, Ziyu Meng, Qiong Zhou, Zhe Li, Yao Lu, Hairong Wu, Jirui Hou, Wanli Kang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The exploration and development of super-low permeability reservoirs have become a global focus in recent years. However, conventional flooding systems commonly face problems of high injection pressure and poor displacement efficiency in super-low permeability reservoirs. Thus, it is imperative to find new flooding agents that tackle such problems. In this study, a novel ultra-low interfacial tension (IFT) nanofluid was formulated, consisting of surfactants to achieve ultra-low IFT and silica nanoparticles to reduce injection pressure. The compatibility test between the surfactants and silica nanoparticles in 10,000 mg/L NaCl solution at 90 °C was conducted to ensure their adaption to harsh reservoir …

Using Agricultural Wastes To Treat Lead-Contaminated Water In Western Australia, Hanie Hashtroudi

Theses: Doctorates and Masters

Aqueous solutions are becoming increasingly contaminated in all parts of the world (2015). Heavy metals are toxic contaminants that are mainly distributed in urban stormwater run-off and industrial wastewaters as a result of some mining operations, electronic assembly planting, battery manufacturing, and etching operations (Kadirvelu et al. 2001). Pb (II) is a heavy metal that causes significant damage in the human body. Drinking lead-contaminated water even at low concentrations may cause lifethreatening conditions such as cancer, kidney damage, brain damage, and liver problems (El-Said 2010). Therefore, it is necessary to remove lead from aqueous solutions.

Several conventional physical, chemical, and …

Testing And Evaluation Of Shale Stability For Zubair Shale Formation, Ahmed K. Abbas, Ralph E. Flori, Ahmed Al-Anssari, Mortadha Alsaba

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Zubair Formation consists of approximately 55% shale, which causes almost 70% of wellbore problems due to incompatibilities of drilling fluids and shale formations. The most common and effective solution to shale instability is through the design and selection of drilling fluids. Understanding the interaction between drilling fluids and shale has been a challenge due to the complexity of both physical and chemical variations in shale formations. This paper presents some of the important laboratory and well-site testing techniques that are often used by mud engineers for characterizing and remediating drilling fluids and shale interaction. Well-preserved shale samples were analyzed to …

Numerical Simulation Study Of Factors Affecting Production Well Gel Treatment Using Linear Models With Crossflow, Kewei Shi

Masters Theses

"Conformance control is an inevitable topic related to water-flooding. Polymer gel has been proved to enhance oil recovery by blocking the existing water-breakthrough channels. Water that is injected subsequently will be directed to the unswept portion of the reservoir, replacing part of the remaining oil and increasing the oil-recovery factor. Prior to pilot tests of polymer gel treatment, laboratory experiments and numerical simulations are used to design the tests. Understanding physical meanings of key parameters that affect polymer gel treatment and relating the parameters from lab data and the simulator benefit field operation design.

This thesis study tries to evaluate …

Reduced Exhaust Emissions Through Blending N-Butanol With Ultra Low Sulfur Diesel And Synthetic Paraffinic Kerosene In Reactivity Controlled Compression Ignition Combustion, Remi Gaubert

College of Graduate Studies: Theses & Dissertations

Increasing restrictions on the emitted exhaust emissions in diesel engines are becoming a more challenging task than in previous years. An electronic common rail fuel injection system and a port fuel injection (PFI) system were developed for an experimental engine to research dual fuel combustion. The experimental research was conducted at 1500 rpm and 4, 5, and 6 bar indicated mean effective pressure (IMEP). n-Butanol was port fuel injected at a 60% by mass fraction coupled with direct injection (DI) of three fuels, including ultra-low sulfur diesel (ULSD RCCI), a 50-50 wt-% blend of ULSD and butanol (ULSD-Bu RCCI), and …

Ultrafast Consolidation Of Bulk Nanocrystalline Titanium Alloy Through Ultrasonic Vibration, Peng Chen, W. B. Liao, Lehua Liu, F Luo, Xiaoyu Wu, Peijie Li, C Yang, M Yan, Y. J. Liu, Laichang Zhang, Zhiyuan Liu

Research outputs 2014 to 2021

Nanocrystalline (NC) materials have fascinating physical and chemical properties, thereby they exhibit great prospects in academic and industrial fields. Highly efficient approaches for fabricating bulk NC materials have been pursued extensively over past decades. However, the instability of nanograin, which is sensitive to processing parameters (such as temperature and time), is always a challenging issue to be solved and remains to date. Herein, we report an ultrafast nanostructuring strategy, namely ultrasonic vibration consolidation (UVC). The strategy utilizes internal friction heat, generated from mutually rubbing between Ti-based metallic glass powders, to heat the glassy alloy rapidly through its supercooled liquid regime, …

Investigation Of Combustion Characteristics Of A Heavy-Duty Diesel Engine Retrofitted To Natural Gas Spark Ignition Operation, Jinlong Liu

Graduate Theses, Dissertations, and Problem Reports (ETD)

The conversion of existing diesel engines to natural-gas spark ignition operation by adding a gas injector in the intake manifold for fuel delivery and replacing the diesel fuel injector with a spark plug to initiate and control the combustion process can reduce U.S. dependence on petroleum imports and curtail engine-out emissions. As the conventional diesel combustion chamber (i.e., flat head and bowl-in-piston) creates high turbulence, the engine can operate leaner, which would increase its efficiency and reduce emissions. However, natural gas combustion in such retrofitted engines presents differences compared to that in conventional spark ignited engines. Subsequently, the main goal …

Using Artificial Intelligence And Machine Learning To Develop Synthetic Well Logs, Marwan Mohammed Alnuaimi

Graduate Theses, Dissertations, and Problem Reports (ETD)

There has been an increase in the need for energy in the recent past. Oil and gas stand as the source of energy that are widely used. The oil and gas reservoirs are targeted for the purposes of field development. The conventional methods of reservoir characteristics require computing techniques that are unique and complex, some of which are labor and time intensive. Mohaghegh argues that all efforts must be tried and made possible to apply Petroleum Data analytics in production and management of reservoir so as to earn a maximum return (Mohaghegh, Shale Analytics, 2017). Different methodologies have been applied …

Sustainable Waste-To-Energy Technologies: Bioelectrochemical Systems, Rami Ziara, Bruce Dvorak, Jeyamkondan Subbiah

Department of Civil and Environmental Engineering: Faculty Publications

The food industry produces a large amount of waste and wastewater, of which most of the constituents are carbohydrates, proteins, lipids, and organic fibers. Therefore food wastes are highly biodegradable and energy rich. Bioelectrochemical systems (BESs) are systems that use microorganisms to biochemically catalyze complex substrates into useful energy products, in which the catalytic reactions take place on electrodes. Microbial fuel cells (MFCs) are a type of bioelectrochemical systems that oxidize substrates and generate electric current. Microbial electrolysis cells (MECs) are another type of bioelectrochemical systems that use an external power source to catalyze the substrate into by-products such as …

Fabrication Of Mnox/Mwcnts-Gc Nanocatalyst For Oxygen Evolution Reaction, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Amr M. Arafa Eng.

Chemical Engineering

Manganese oxide (MnOx) and multiwalled carbon nanotubes (MWCNTs) are intended to modify the GC electrode for oxygen evolution reaction (OER). Optimization of MnOx loading is carried out and the deposition of 55 cycles was sufficient to obtain the highest activity toward OER. The stability of the catalyst is enhanced by the addition of MWCNTs. As a result, an amount of 22 kWh/Kg of O2 of energy is saved. Several techniques including cyclic voltammetry, linear sweep voltammetry, chronoamperometry, chronopotentiometry, field-emission scanning electron microscopy, and energy dispersive X-ray spectroscopy will be combined to track the catalyst activity and to determine its morphology …

Reaction Kinetics Of Ethane Partial Oxidation To Acetic Acid, Sulaiman Al-Mayman, Moustafa A. Soliman, Abdulrhman S. Al-Awadi, Yousef S. Al-Zeghayer

Chemical Engineering

The partial oxidation of ethane to ethylene and acetic acid on supported MoVNbPd/TiO2 (P25 of Degussa) has been investigated. Pd was added in a nano-metallic form. The catalyst composition was also different from similar studied catalysts. This results in a better selectivity towards acetic acid formation. The reaction was carried out in a tubular reactor at temperature range 225–275 °C, total pressure range 0–200 psig and oxygen percentage in the feed gas of 10–40%. The feed gas contains ethane and oxygen. In this work, we develop a kinetic model for the reaction for the developed catalyst. In this model, we …

Partial Oxidation Of Ethane To Acetic Acid Using A Metallic Pd Promoted Movnb Catalyst Supported On Titania, Sulaiman Al-Mayman, Abdulrhman S. Al-Awadi, Yousef S. Al-Zeghayer, Moustafa A. Soliman

Chemical Engineering

The partial oxidation of ethane to acetic acid on a multi-component Mo16V6.37Nb2.05Pdx oxide catalyst supported on Degussa P25 titania has been investigated. The catalyst was characterized using BET surface area, X ray diffractometer (XRD) and transmission electron microscopy (TEM). The reaction was carried out in a differential reactor in a temperature range of 200-275°C and at a total pressure of 200 psi. The addition of trace amounts of nano-palladium, either as palladium oxides or metallic palladium, enhanced ethane oxidation towards the formation of acetic acid with near-complete depletion of the ethylene intermediate from the reactor effluent. The introduction of nano-Pd …

Assembling Of Niox/Mwcnts-Gc Anodic Nanocatalyst For Water Electrolysis Applications, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Saher D. Khamis Eng

Chemical Engineering

Glassy carbon (GC) electrode is intended to be modified with nickel oxide (NiOx) and multiwalled carbon nanotubes (MWCNTs) in the anodic reaction of water electrolysis. NiOx deposition time is optimized and a 5 min was enough to attain the maximum activity. A further modification of the catalyst with MWCNTs could greatly enhance its stability during continuous electrolysis. As an outcome, an energy amount of 21.7 kWh/KgO2 is minimized. Several electrochemical and materials characterization setups will be utilized to test the catalyst activity and to know its geometry and structure.