Chemical Engineering Commons^™

Evaluation Of Silver/Graphite Ink Blends For Use In Printed Electronics, Sagar Satish Joshi

Masters Theses

Many organizations around the globe are actively involved in the research and development of printed displays, circuits, printed batteries, RFID tags and other printed electronics applications. The requirements for using printing techniques in the manufacturing of circuits are much more demanding than for conventional printing.There are many challenges that have to be overcome for successful printing and functioning of the printed circuits. These challenges are not only for the printing process and the substrates, but also for the functional inks used for printed electronics manufacturing.

This work focuses on gravure printing of conductive inks, more specifically silver, graphite and silver-graphite …

Continuous Monitoring Of Bioactive Glass Conversion Using Optical Biosensors, Prajakta Bhagwat

Masters Theses

"The engineered regeneration of bone is a significant challenge being undertaken to treat conditions such as traumatic casualties, bone cancer, osteoporosis, etc. Advances in hard tissue regrowth may potentially lead to significantly improved lives for millions of people. Bioactive glasses as potential materials in the fabrication of scaffolds for hard tissue regeneration have been studied recently. Bone regrowth requires maintenance of optimal levels of oxygen, glucose, phosphate, calcium, and pH. Current work at Missouri S & T's Center for Bone and Tissue Repair and Restoration focuses on developing optical biosensors to monitor: conversion of bioactive glass to hydroxyapatite, ease of …

Effects Of A Nickel Reactor Liner And Other Reaction Variables During Supercritical Water Reformation Of Glycerin, Michael S. Stever

Masters Theses

"The non-catalytic reformation of glycerin using supercritical water was conducted in a 400-mL tubular reactor constructed of Haynesʼ Alloy 230. The evaluated parameters for this thesis include water-to-glycerin molar ratios ranging from 3 to 24 and reactor temperatures ranging from 500⁰C to 700⁰C. In addition, experiments were performed using the Haynes' Alloy 230 reactor both without a liner and with a Nickel 201 liner. Space time was maintained at approximately 100 seconds and the reactor pressure was kept constant at 24.1 MPa. The resultant effect on product gas composition and carbon gasification was determined. The product gases consisted of a …

Experimental Study Of The Interaction Between Surfactants And Preformed Particle Gels, Farag Awadh Muhammed

Masters Theses

"Gel and surfactant treatment are two principle methods to reduce water production and enhance oil recovery (EOR). However, either method by itself has limitations that can be avoided by combining the two. Gel treatment can improve sweep efficiency but has little effect on micro-displacement efficiency. Surfactants are mainly used to improve displacement efficiency but have little effect on sweep efficiency. This research sought to investigate whether the combination of gel and surfactant treatments can be used to significantly enhance oil recovery while reducing water production for extremely heterogeneous mature reservoirs. A newer trend in gel treatments is preformed particle gels …

Shale Gas Rock Characterization And 3d Submicron Pore Network Reconstruction, Malek Elgmati

Masters Theses

"Determining shale gas petrophysical properties is the cornerstone to any reservoir-management practice. Hitherto, conventional core analyses are inadequate to attain the petrophysical properties of shale gas at submicron-scale. This study combines interdisciplinary techniques from material science, petrophysics, and geochemistry to characterize different shale gas samples from North America including Utica, Haynesville and Fayetteville shale gas plays. Submicron pore structure, clay mineralogy, wettability and organic matter maturation were investigated to evaluate the petrophysical properties of shale gas rocks and to determine the impact of organic and inorganic matters on wettability alteration for different fracturing fluids on shale gas rocks.

High pressure …

Mesh Optimization Of Finite Element Models Of Wellbore Stress Analysis, Ming-Yen Lee

Masters Theses

"Numerical modeling methods such as the widely used finite element method provide an excellent opportunity to analyze the wellbore state of stress for a variety of applications such as wellbore integrity, wellbore design or hydraulic fracturing. However, numerical modeling methods introduce errors by nature and may not precisely match the analytical solution if the meshing of the numerical model is not carefully taken care of. This study presents a parametric study of the meshing parameters mesh density, element type, and model size for 2-dimensional and 3-dimensional vertical wellbore models under three different types of boundary conditions, and a guideline for …

Thermomechanics Of Curves In Space, Pavan Krishna Kanchi

Masters Theses

"Several biological molecules are known to form helices and coiled structures, such as DNA, collagen, bacterial flagella, and proteins. The backbones of such molecules may be modeled as a curve in three dimensions. A variational problem for the functional of the total free energy required to perturb moving curves in space is considered. The total energy of a curve in three dimensions is minimized y with a general intensive energy, which is a function of position, and the invariants, curvature and torsion. Three types of moduli are identified: stretching, bending and torsional moduli. As a result, three independent force balances …

Numerical Simulation Of Relative Permeability Modifier Effect On Oil And Water Production, Murad Mohammedahmed Abdulfarraj

Masters Theses

"Excess water production is one of the most prevalent operational problems that oil companies are facing. Polymers and polymer gels have been used widely to control excess water production for mature oilfields. It is well known that polymers/gels can reduce the permeability to water (Krw) much more than that to oil (Kro). This phenomenon is called disproportionate permeability reduction (DPR) and the polymers or gels that exhibit this behavior are called relative permeability modifier (RPM). When RPMs are placed in reservoir, reduced permeability to water can lead to decreased water production, and sometimes increased hydrocarbon production, therefore prolonging the useful …

The Feasibility Of Using Bifidobacteria Bifidum (Atcc 700541) For The Production Of Prebiotic Oligosaccharides, Candice Marie Luehrs

Masters Theses

"Galactooligosaccharides (GOS) are prebiotics that are being used to influence intestinal microbiota towards health promoting, beneficial bacteria like bifidobacteria. Natural sources of GOS are not found in suitable levels to achieve the desired health effects so economically viable commercial production methods are important. Enzymatic conversion of lactose to GOS through transgalactosylation is a preferred method since the starting material is inexpensive and readily available. Enzymes used in batch production are purified from fungal or bacterial sources or remain in whole cells cultured for GOS production. Purified or unbound enzymes are single use whereas enzymes retained within whole cells can potentially …

Strength Evaluation And Transportation Behavior Of Preformed Particle Gel Using Screens And Tubes, Rajesh Sarma Challa

Masters Theses

"This research included a series of experiments, using screen models to evaluate the strength of swollen gel particles. It also includes the study of PPG propagation and extrusion behavior through tubes of various internal diameters. The effect of the particle gel swelling ratio (depending on brine concentration), flow rate; and mesh size on the gel injection pressure and injectivity were studied. The results show that gel injection pressure depends primarily on the swelling ratio and the mesh size. However, the injection pressure does not increase significantly with injection rates, behavior consistent with the real-time injection pressure and injection rate change …

Fabrication Of A Memory Device Using Polyaniline Nanofibers And Gold Nanoparticles, Krunal R. Waghela

Masters Theses

"Fabrication of a memory device using one-step/one-pot synthesis for making a PANI (polyaniline)/Au nanocomposite is reported. Although various devices with horizontal and vertical electrode structures were made, the basic structure used consisted of a PANI/Au thin film sandwiched between two electrodes. The ratio of the current in the OFF state to the current in the ON state was seen to be as high as 5000. These devices showed a bistable behavior, which is typical of memory devices. The PANI/Au nanocomposite thin film was constructed right on the electrode using microfabrication techniques with ultraviolet irradiation. The fabrication techniques discussed in this …

Biodiesel Production Using Supercritical Methanol, Dhaval Nitin Modi

Masters Theses

"The catalyst-free transesterification of oil (triglycerides) in supercritical methanol at a temperature and pressure above 239⁰C and 8.1MPa, respectively, provides a new way of producing biodiesel. High reaction temperature and pressure help to accelerate the transesterification because the supercritical methanol becomes non-polar and has enhanced contact with oil. The supercritical transesterification of soybean oil was carried out in a 170 ml volume high-pressure batch reactor. The pressure within the batch reactor was self-generated from heating the contents since no pumps were used. Transesterification of soybean oil with supercritical methanol readily produced biodiesel. Since the supercritical transesterification is carried out without …

Microalgae Harvesting By Flocculation With Polymer-Coated Magnetite Particles, Humayun Shariff

Masters Theses

"Although microalgae are considered to be one of the potentially significant feedstock for renewable biofuels, harvesting them efficiently from culture ponds has been a major hurdle. The conventional harvesting methods such as centrifugation and filtration are very time and labor intensive processes. Gravimetrical settlement with the aid of cationic flocculants is the most widely employed technique, but suffers from the difficulty in recovering microalgae floes. Furthermore, recycling of these flocculants after the harvesting process is not possible. Polymer-coated magnetite particles have been investigated for applications in various fields. This research has focused on the development of a novel and efficient …

Optimization Of Parameters And Study Of Kinetics In Lactulose Production By Lactose Isomerization Using Strong Basic Anion Exchange Resin, Arvind Nanduri

Masters Theses

"In this work, an experimental design was employed to investigate the effects of different operating conditions on the isomerization of lactose to lactulose by using strong basic anion exchange resin (AMBERLITE-IRA 402). Temperature, resin/lactose mass ratio and pH were considered to be the three factors affecting the conversion of lactose. Box-Behnken design was then used to optimize the operating conditions for maximum response and also to study the various interaction and main effects of the factors. The analysis of variance (ANOVA) of the experimental data showed a high correlation coefficient R² (0.99) and a low root mean square error (2.84) …

Enhanced Photorefractivity In A Polymeric Composite Photosensitized With Modified Carbon Nanotubes, Naveen Kumar Lingam

Masters Theses

"This work involves the photosensitization of photorefractive polymeric composites through the inclusion of multiwalled and singlewalled carbon nanotubes grafted to poly(N-vinyl carbazole). The photorefractive nature of the holograms gratings was established using two-beam-coupling, yielding two-beam-coupling gain coefficients approaching 80 cm⁻¹. Degenerate-four-wave-mixing experiments exhibited diffraction efficiencies as high as 60% as well as over-modulation voltages as low as ~ 40 V/µm. These notable figures of merit indicate that the grafting of the various carbon nanotubes to the poly(N-vinyl carbazole) polymer resulted in enhanced photorefractive performance. The mechanism responsible for this enhancement in photorefractive performance is investigated using a variety of experimental …

Development And Evaluation Of An Effective Process For The Recovery Of Oil And Detoxification Of Meal From Jatropha Curcas, Sarthak Gaur

Masters Theses

"There has been significant research on biofuels to ensure national security and economic stability of the US. Jatropha curcas, a hardy plant, holds tremendous potential as a biodiesel source and cattle feed-stock largely due to its high triglyceride and crude protein content. However, its viable economic utilization is limited due to the presence of important toxic compounds, phorbol esters. A novel and efficient process has been developed that obtains high yields of jatropha oil and detoxifies the defatted (oil free) jatropha meal. Principles of solid-liquid extraction were utilized to detoxify the meal and then liquid chromatography was employed to analyze …

Classification Of Fine Particles Using A Taylor-Couette Device, Navina Durgaiah Tungapindi

Masters Theses

"The study of fine particle classification is common, especially since a well defined particle size distribution is important in most processes and products. Many methods have been developed to classify micron-size particles, and although each has its own advantage, most cannot classify particles to an extremely narrow range. This is partly due to the cohesive nature of fine particles, which can be due to electrostatic attraction, moisture, or van der Waals forces. In order to overcome this problem, a wet method of classification has been chosen here. Taylor vortices, discovered in 1923, develop in the fluid contained in the annulus …

The Effects Of Water To Fuel Ratio On The Kinetics Of Supercritical Water Reformation Of Jet Fuel, Satya Putta

Masters Theses

"The noncatalytic direct reformation of jet fuel was studied in a supercritical water medium using a specially designed 400-mL Haynes® 230 alloy tubular reactor. The experiments were conducted at 1042±5 K, 240.9±0.1 bar, and at water flow rates of 7.5, 15, 30 g/min with varying water-to-fuel feed ratios of 7.5, 15 and 30. The principal reactions are direct reformation of jet fuel into hydrogen and carbon oxides and pyrolysis of jet fuel into lighter hydrocarbons and coke. The effluent gas contained H₂, CO, CO₂ and CH₄, with smaller concentrations of C₂H₄ and C₂H₆. This thesis discusses the effects of the …

Synthesis Of Iron Oxide Nanoparticles In A Counterflow Diffusion Flame Reactor, Hector Enrique Ruiz

Masters Theses

"A Counterflow Diffusion Flame (CDF) reactor was used to produce iron oxide nanoparticles. The experimental work was performed to study synthesis conditions and characterize the iron oxide nanoparticles. The parameters studied are those that control the flame structure, namely, gas flow rates and vacuum; other parameters include the precursor volume flow rate, and the relative location and temperature of the collecting probe inside the flame. Hexagonal nanoparticles were the most commonly observed shape. Hexagonal-shaped nanoparticles are mainly formed under stoichiometric conditions and with a high temperature profile in the flame. Cubic nanoparticles were also observed. The main parameter for the …

A Coarse-Grain Molecular Dynamics Study Of The Nanotribological Properties Of Nanoparticle Solutions, Ramesh Chembeti

Masters Theses

"In this study, solutions of alkanethiol-capped nanoparticles in alkane are examined using molecular dynamics simulations for their nanotribological potential based on the hypothesis that fluid molecules of very different sizes may interrupt each other's layering tendency to result in less layered or non-layered configurations and provide better lubrication for nanodevices. An effective nanoparticle-nanoparticle pair potential based on previous atomistic approach is used and the temperature and parallel pressure are controlled in place of chemical potential for defining thermodynamic state. When compressed, the confined nanoparticle-containing alkane films generate reduced oscillations in perpendicular forces and smoother expansion in lateral dimensions, indicating lesser …

Release And Removal Of Microcystins From Microcystis During Disinfection Treatments, Jie Ding

Masters Theses

"The presence of algal toxins, or cyanotoxins, in surface water has been increasingly reported. These highly hazardous toxins are potential threat to both human health and animals by contaminating drinking water sources over the world. In this research project, inactivation of Microcystis aeruginosa cells and release and removal of intracellular microcystins during several oxidative and physical treatments was studied. The results of this study show that chlorine dioxide, sonication, low salinity and quick blending with tissuemiser caused immediate release of microcystin-LR to water after treatment. No significant increase of toxin level was observed after treatment with free chlorine, ozone, permanganate, …

Autothermal Non-Catalytic Reformation Of Jet Fuel In A Supercritical Water Medium, Jason W. Picou

Masters Theses

"The non-catalytic reformation of jet fuel using supercritical water was studied in a specially designed 0.4-L Haynes Alloy 230 tubular reactor. Experiments were performed at a constant pressure of 24.1 MPa, a temperature of 770°C, and at a constant water-to fuel ratio of fifteen-to-one by mass with various space times and oxygen flow rates. The experiments were conducted with and without air flow so as to examine the effects of the concurrent partial oxidation on the overall reformation process. The reactor effluent gas consisted of hydrogen, nitrogen, carbon dioxide, carbon monoxide, methane and ethane. Increasing space time increases the extent …

Removal Of Heavy Metals From Electroplating Wastewater Using Rice Husk And Coconut Coir, Frency Mathew

Masters Theses

"Heavy metal toxicity due to industrial wastewater has been a threat to the environment for the past many decades, especially in the developing countries such as India, China and Thailand where cost effectiveness of the removal process is a major factor. In this research, the effectiveness of two natural adsorbents, rice husk (RH) and coconut coir (CC), which are cheaply available in these countries for the removal of heavy metals from electroplating wastewaters were studied"--Abstract, page iii.

Security Printing: Towards Hologram Printing, Sachin Ravindra Agate

Masters Theses

Today we are facing many situations where the genuineness of the products and documents is questioned. Counterfeiting the original products has become a business of few people, which result in the degradation of quality of products, loss of money and loss of faith of end user. To prevent such malicious act, security features are added in the final product. Security printing is one of those methods that help in preventing counterfeit products and treachery. There are many different security features, which can be added in the security printing. Apart from those features, an embossed hologram is also included in prints …

Synthesis And Characterization Of Platinum-Based Multi-Component Catalysts For Direct Methanol Fuel Cells, Li Ren

Masters Theses

"In the thesis work, Pt-based binary, ternary, quaternary alloy anode catalysts supported on sonochemically treated multi-walled carbon nanotubes (CNTs) were synthesized with ethylene glycol reduction of corresponding metal chloride salts. Inductively coupled plasma-mass spectroscopy (ICP-MS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM) were used for catalyst characterization. Cyclic voltammetry for methanol oxidation and CO stripping were used to evaluate the performance of the catalysts.

PtRu nanoparticles supported on CNTs (PtRu/CNT) were prepared under a series of pHs. It was found that the PtRu particle size, composition, and catalytic activity were all sensitive to the deposition …

Cfd Simulation Of Contact Planarization, Shanti Vusirikala

Masters Theses

"Semiconductor devices form the essential components of most electronic devices. The fabrication of circuit elements to manufacture these devices is done by a process known as photolithography, using photoresist layer deposition, optical masks, and etching. As feature sizes become smaller, higher optical precision is required, necessitating an optically flat surface on the photoresist layer. The surface of the photoresist layer can become uneven because of conformation to the topography of the layers underneath or a change in shape of the layer after evaporation of solvent. To combat this, Brewer Science, Inc. has developed a contact planarization process (CON-TACT®) in which …

Fine Particle Classification Using Dilute Fluidized Beds, Rajasekharan Pillai Annapoorneswari

Masters Theses

"The main objective of this project is to classify spherical soda-lime glass particles based on their size using a dilute fluidized bed system. The influence of inclined plates in the column, plate separation, plate inclination, and number of plates on the overall separation efficiency of particles will be investigated. The effect of column shape on the classification efficiency will also be assessed"--Introduction, page 3.

Synthesis, Characterization And Application Of Pd-Pt Bimetallic Nanoparticles And Carbon Nanotubes Supported Nanocomposites, Guoqiang Ren

Masters Theses

"A study on the synthesis of Pd-Pt alloy nanoparticles and composition evolution of the alloys was reported. The synthesis followed a hot organometallic route, with Pd and Pt acetylacetonate as the metal precursors and trioctylphosphine as the solvent. The size of the Pd-Pt nanoparticles narrowed down with time and reached a final size of 3.5 nm in about 10 min. The alloy compositions evolved with time and reached the preset Pd to Pt ratio of precursors in 120 min. An atomic exchange process between the Pt-TOP complex and the Pd atoms at the nanoparticle surface was proposed to elucidate this …

The Dependence Of The Overall Drying Time And Product Quality Of A Lyophilization Process On The Relative Position Of Vials On A Tray With Tray Sides And Without Tray Sides For Different Heat Input Control Policies, Kian Hui Gan

Masters Theses

"The dynamic behavior of the primary and secondary drying stages of the lyophilization process were studied when (a) single vials located at different positions on the tray were individually being dried, and (b) the vials on the tray are arranged in clusters of square and hexagonal arrays and all the vials on the tray are simultaneously being dried. For both cases (a) and (b), fast drying times and relatively more uniform distributions of temperature and concentration of bound water at the end of the secondary drying stage are obtained by heat input control that runs the lyophilization process close to …

Silica Coating Of Gold Nanoparticles, Milind Laxman Surve

Masters Theses

“Gold colloids have been homogenously coated with silica using silane coupling agents as a primer to make the gold surface vitreophilic. After adding active silica, the particles are transferred in ethanol for uniform silica coating by using the Stober method. Gold nanoparticles used for this study ranged from 5 nm up to 40 nm with mixed results. Silica condensation can be controlled to produce different silica thicknesses on gold. The main problem while coating smaller particles (5 nm and 10 nm) was the final coagulation or necking of silica after coating the gold surface. The possible causes for this effect …