Chemical Engineering Commons^™

Gold-Magnetite Nanoparticle-Biomolecule Conjugates: Synthesis, Properties And Toxicity Studies, Akshay Pariti

Masters Theses

"This thesis study focuses on synthesizing and characterizing gold-magnetite optically active magnetic nanoparticle and its conjugation with biomolecules for biomedical applications, especially magnetic fluid hyperthermia treatment for cancerous tissue. Gold nanoparticles have already displayed their potential in the biomedical field. They exhibit excellent optical properties and possess strong surface chemistry which renders them suitable for various biomolecule attachments. Studies have showed gold nanoparticles to be a perfect biocompatible vector. However, clinical trials for gold mediated drug delivery and treatment studied in rat models identified some problems. Of these problems, the low retention time in bloodstream and inability to maneuver externally …

Evaluation Of Prosper For Modeling Long Lateral Gas Well Productivity In Toe Up, Toe Down, Horizontal Well Geometry, Abdussalam Mahmoud Mohamed

Masters Theses

"Most horizontal wells are not truly horizontal and may be drilled 'toe-up' or 'toe-down' to follow geological formations or in an attempt to keep the well from loading up. Challenges in directional drilling may also lead to horizontal gas wells with undulating wellbore profiles. This wellbore profile creates natural traps for heavy fluids in the lows and light fluid in the highs, which may result in chocked production. Hence, there is an interest in determining the best wellbore trajectory - toe-up, horizontal, or toe-down - for well unloading.

This study evaluates the capability of the well productivity software PROSPER to …

The Effect Of Using Different Rock Failure Criteria In Wellbore Stability Analysis, Reza Rahimi

Masters Theses

"Determination of the appropriate drilling fluid density by rock failure analysis is an essential step to control wellbore instability. To determine wellbore failure stresses, the rock strength has to be known, an appropriate constitutive model has to be selected, and finally an accurate rock failure criterion must be chosen. Linear-poro elastic modeling of the mechanical wellbore failure is the most common approach to investigate wellbore instability. Numerous failure criteria have been used for the rock failure analysis but there is not any commonly accepted agreement of which failure criteria to use. Rock failure criteria differ in two main characteristics. First, …

Formulation And Evaluation Of Resistive Inks For Applications In Printed Electronics, Sughosh Satish Bhore

Masters Theses

In the 21^st century, it has been shown that printing methodologies can be used to print electrically functional devices on a variety of substrates. In comparison to conventional electronic manufacturing methods, printing is a more cost effective and less complex process. The requirements for manufacturing Printed Electronics (PE) components are much more demanding than graphic printing applications due to the additional requirement of easy electron flow. This additional requirement increases the need for print uniformity and layer-to-layer registration to a much higher degree. In this work, hybrid UV-curable, water-based, electrical resistive inks were formulated. Inkjet inks were prepared by …

Fuctional Properties Of Phthalocyanine Dye Based Inks, Yumeizhi Jia

Masters Theses

Currently, inkjet printing techniques are getting more attention. They have the features of non-contact and additive patterning feasibility, compatibility with different substrates (the materials on which the ink is printed), low temperature processing, and low cost (1) (2). They can be used for patterning solution processable polymers or nanoparticle inks on various substrates including conductive materials, paper and glass (3). The need for proper functional inks is increasing every year. The goal of my work was to formulate a phthalocyanine water based ink, which can work as a dielectric ink. In my research, all the materials which were used to …

Improved Deinkability Of Lep (Liquid Electrophotography) Digital Prints, Zheng Wei

Masters Theses

Digital printing plays a very important role in the life of modern society. With the development of digital printing technologies, and the increasing market share of digital printing, the amount of digital prints in waste paper is rapidly increasing. Under “green” manufacturing and environmental sustainability, deinking of digital print inks is an urgent problem that needs to be solved. Indigo is a typical series of HP (Hewlett-Packard) digital presses that use a liquid ink named ElectroInk (Liquid Electrophotography or LEP). The particle size of HP ElectroInk is very small, 1-2 microns, which is smaller than dry toners. But, during flotation, …

Extended Color Gamut For Flexographic Printing, Gaurav Dinesh Sheth

Masters Theses

The advancement in technology and the necessity to satisfy the increasing quality requirements has aroused the need for use of extended color gamut in flexographic printing. The information about extended gamut inks and ink systems is not easily available therefore, it is essential to define ink sets and color sequences that will produce optimal results in the flexographic printing process. The results were produced by evaluating color gamut volumes obtained by printing with four color process inks, and additional ink sequences, as well as by evaluating other print parameters that provide evidence in support of the research work. Special focus …

Comparison Of Class Ii Injection Well Area Of Review Requirements With Area Of Evaluation For Hydraulically Fractured Wells, Yashesh Jitendra Panchal

Masters Theses

"Since 2010 the US Environmental Protection Agency (EPA) has been proposing plans to study, and has now initiated research regarding the potential impact of hydraulic fracturing processes on drinking water sources. Their work refers to an 'Area of Evaluation' around a hydraulically fractured well, inferring that the wells immediately around hydraulic fractured wells should be studied, to evaluate the conditions of these wells and their potential to contaminate overlying USDWs. Class II injection wells must have a minimum 1/4 mile radius area of review to determine the condition of wells surrounding the proposed injection well. All wells within this AOR …

Robust Methods For Construction Of Global Potential Energy Surfaces, Phalgun Lolur

Masters Theses

"This thesis is about the development of robust methods for construction of global potential energy surfaces to study the spectroscopy and dynamics of molecular systems. A potential energy surface represents the electronic energy of a molecule as a function of its geometry. This is central to how chemists view molecular systems in terms of motion across a rich energy landscape where barriers separate wells corresponding to different stable structures. The range of molecular distortions defines the potential energy surface. Computing the potential energy surface of a molecule has become a fundamental operation in modern theoretical chemistry studies. The Born-Oppenheimer approximation …

Tensile Failure During Structural Development Of Single-Layer Buckle Folds, Xiaolong Liu

Masters Theses

"Folds and fold trains of sedimentary strata are among the most common structural traps systems for hydrocarbon reservoirs. The existence of tensile fractures associated to buckle folding is associated to the distribution of extensional strain in the outer arc of the fold hinges. This study investigates the conditions under which tensile stresses develop due to buckling in a realistic in situ stress scenario. By applying a 2D finite element modeling approach, the influence of realistic mechanical stratigraphy (including strain rate, overburden depth, competence contrasts, viscosity, and permeability) on the development of single-layer buckle folds with Newtonian viscous rheology is studied. …

Gas And Water Flow Through Nanoscale Porous Media, Songyuan Liu

Masters Theses

"This work provides a lab experiment to describe the fluid diffusion in nanoscale porous media. By using ideal ceramic membranes which have uniform pore size in nanoscale and homogeneous pore distribution instead of shale or tight sandstone which have various pore sizes and complicated pore distribution and structure, a better understanding of fluid flow through nanoscale porous media could be gained.

Core flooding test were conducted by injecting nitrogen and water separately to describe gas and liquid flow in nanoscale porous media. With all the other factors known or controlled, pressure and flow rate were measured to calculate permeability. By …

Comparison Of Square Root Of Time Approach And Statistical Approach To Minimize Subjectivity In The Determination Of Minimum In-Situ Stress, Soumitra Bhaskar Nande

Masters Theses

"A formation's minimum in-situ stress is an important parameter to determine for hydraulic fracturing. While minimum in-situ stress, and its orientation, can be measured from triaxial tests on core, it is more common to measure it as closure stress, by performing pressure testing of wells in the field. Closure stress is considered equal to, or a good approximation of the minimum in-situ stress for most cases. The analytical methods applied to such pressure testing include the square root of time plot, G function plot and the G-dP/dG plot. These plots require the engineer to fit tangent lines to the data, …

Protein Aggregation At Solid/Liquid Interfaces: A Monte Carlo Study With Explicit And Implicit Solvent Effects, Rehman Fazeem

Masters Theses

"Metropolis Monte Carlo (MC) simulations were performed with positively charged peptides in aqueous solution to study changes in peptide conformations at solid/liquid interface, and its effects on protein aggregation. Intermediate-resolution diblock model peptide, comprising of 10 units of ALA (non-polar) and LYS (polar) amino acid residues, was used for the simulations. In the first approach to modeling, solvent effects were considered explicitly. The explicit model was then used to study two peptide molecules, in helical structure, at solid/liquid interface. In order to increase the number of peptide molecules in the simulation box, with reduced computational cost, an implicit solvent model …

Computational Fluid Dynamics Flow Comparison Between Openhole Sleeve And Plug-And-Perf Completion In A Hydraulic Fractured Horizontal Well, Viriyah Theppornprapakorn

Masters Theses

"Multi-stage hydraulic fracture completions in horizontal wells have facilitated economic development of natural gas from unconventional and tight gas reservoirs.Industry has relied on two horizontal multi-stage completion technologies: cemented and perforated liner or Plug-and-perf method and Openhole Sleeve Multi-stage method. Each method has its own advantages and disadvantages. However, one of the most important questions is which method yields better gas production? Computation fluid dynamics (CFD) is a powerful tool for solving complex fluid flow problems. In well completion design, CFD plays a significant role aiding the completion engineers on making decision on well completion methods. In this study, a …

Kinetics Of Human And Bovine Insulin Amyloid Fibril Formation In The Presence Of Solid/Liquid Interfaces, Paulina Barranco Morales

Masters Theses

"The purpose of this thesis was to study the rate and extent of aggregation of human and bovine insulin in bulk and in the presence of either polystyrene microspheres with different surface chemistries or liposomes of different composition. Insulin aggregation was followed by turbidimetry, Fourier transform infrared spectroscopy (FTIR), and dynamic light scattering. The Congo red assay was used to corroborate the presence of amyloid deposits and transmission electron microscopy (TEM) was used to analyze the morphology of the amyloid deposits. Our results show that not all the surfaces shortened the lag time. On the other hand, most surfaces had …

The Reduction Of Glycerol Flow In A Porous Medium Through A Barrier Coating Application, Thomas Tran

Masters Theses

Coatings for paper are categorized into two groups: pigmented or functional. Functional coatings provide functionality in addition to the normal coating properties. Functional coatings can be used for friction control, release properties, abrasion resistance, and barrier properties. A coating that is designed to control barrier properties can be categorized into a sub-group of functional coatings called barrier coatings.

Barrier coatings can retard or eliminate the flow of fluids thru a coated substrate. The barrier can be effective in repelling or resisting the transmission rate of numerous fluids including moisture, oil, oxygen, grease, and glycerol. Barrier coatings have many useful applications …

Fabrication Of Printed Substrate For Surface Enhanced Raman Spectroscopy, Ali Eshkeiti

Masters Theses

A novel surface enhanced Raman spectroscopy (SERS) substrate was successfully fabricated on a silicon wafer using inkjet printing and on polyethylene terephthalate (PET) using gravure printing. Silver (Ag) nanoparticle (NP) based ink, was used for roughening of the surface of silicon and PET. A thickness of 400 nm was measured for the printed Ag NP printed film on silicon and the thickness of the single and double layered films on PET were measured as 340 nm and 680 nm, respectively by using vertical scanning interferometry. The Ag NP printed SERS substrate was tested for application with heavy metal compounds like …

The Influence Of Coating Structure On Sheet-Fed Offset Ink Setting Rates, Ting Chen

Masters Theses

Much attention has been paid to the study of quickset ink setting as a complex ink-coating interaction. Offset ink setting rates are typically measured as ink splitting forces versus time and the slope of the regression line obtained from a plot of these measured values is reported, but scant attention has been paid to the deviations from that straight line. An initial slow ink setting rate is desired to minimize back-trap mottle, carryover picking and piling and enhance ink gloss; then a faster ink setting rate during sheet delivery to the pile is desired to reduce the likelihood of ink …

Formation Of Amyloid Fibrils By Diblock Peptides, Kunal Mukesh Naik

Masters Theses

"The objective of this study was to identify and then synthesize a series of peptides which were able to form fibrils rich in ß-sheet structure and to study the effect of the presence of surfaces on their formation. We decided to focus our experimental work on a family of peptides containing one "beta-sheet forming amino acid" and one 'alpha-helix forming amino acid'. This selection covers a wide range of hydrophillicites and charges and, by avoiding highly hydrophobic amino acids we can assure that the diblock peptides are soluble in a wide range of concentrations and solvent conditions. Three different diblocks …

Investigation Of Drillstring Vibration Reduction Tools, Mohammed Fayez Al Dushaishi

Masters Theses

"Drilling related problems such as drillstring vibration is an important cause of premature failure of drillstring components and drilling inefficiency. The vibration of drillstring interferes with measurement collected while drilling. In severe cases, drillstring vibration will lead to wellbore instability that will result in an increase in the operation cost. In the late 1980's, a lot of studies and techniques were developed to mitigate drillstring vibration and downhole vibration measurements were introduced to the industry in two forms; real time measurements and memory devices measurements

A study of drillstring vibration of three different wells located in the Norwegian North Sea …

Hydraulic Fracturing Experiments To Investigate Circulation Losses, Maximiliano Liberman

Masters Theses

"In recent years the oil and gas industry has been drilling more challenging wells due to long deviated wells, drilling through already depleted reservoirs, sub salt wells and increasing water depth. A major challenge these wells create is to prevent fluid loss into the formation and wellbore breakouts by having accurately determined the mud weight operational window. In addition to accurately determine the fracture gradient, additives in the drilling fluid have been used to enhance the fracture gradient in an industry process named wellbore strengthening. In order to study the phenomenon of fracture gradient alteration, a hydraulic fracturing apparatus was …

Investigation Of Geosteering In Non-Trivial Geological Settings, Anuroop Pandey

Masters Theses

"The well placement technology has advanced to a stage where we can explore small tolerance targets such as thin reservoirs. Well placement with geosteering, which is the real time adjustment of the well path based on the geological responses to place and maintain the well within the best part of the reservoir, is the technology that has made this progress possible. Geosteering however can get very complex with the increasing heterogeneities of the formations and there is no fixed methodology to devise a steering strategy in such complex geological settings. To accommodate this challenge, we investigated three methods to verify …

Surfactant Enhanced Oil Recovery By Wettability Alteration In Sandstone Reservoirs, Omar Elmofty

Masters Theses

"Recovering more oil from existing oil reservoirs using enhanced oil recovery methods holds the key for meeting future energy demands. Even though wettability is a cornerstone in oil recovery, few studies have focused on increasing oil recovery in sandstone reservoirs through wettability alteration. The objective of this thesis is to prove that altering the wettability of a sandstone rock to preferentially water-wet condition will reduce the remaining oil saturation and thus increase the percentage of recovered oil.

Two commercial surfactants were selected after studying both the phase behavior and the interfacial properties of 30 surfactants with oil and 1.00% sodium …

Geomechanical Characterization Of Reservoir & Cap Rocks For Co₂ Sequestration, Sudarshan Govindarajan

Masters Theses

"Geological sequestration of CO₂ has been identified as one method to reduce global emissions of CO₂ and achieve lower levels of CO₂ concentrations in the atmosphere. Geological formations have to be assessed in terms of their capacity, sealing capabilities and economic feasibility before CO₂ sequestration can commence. Potential leakage of injected CO₂ from the reservoir formation could occur due to natural or injection induced faults or fractures in the reservoir or sealing formations. As part of a potential leakage investigation a geomechanical characterization which refers to the assessment of the in-situ stress conditions, rock strength and stiffness properties of the …

Synthesis Of Nickel Nanoparticles By Gamma-Radiation And Femtosecond Laser Ablation, Vivek Murlidhar Rao

Masters Theses

"Nickel nanoparticles were synthesized by gamma-radiation and femtosecond laser ablation. Aqueous precursors were prepared by uniformly dispersing nickel chloride in a 2:1 ratio of water and isopropanol. Stabilizers employed were Sodium Dodecyl Sulfate (SDS) and Poly Vinyl Pyrrolidone (PVP). Gamma-ray radiolysis of aqueous nickel precursors was investigated as a reducing agent for nickel cations to form atomic seeds for nucleation on multi-walled carbon nanotubes (MWCNTs). 30-60kGy was the dosage used in increments of 10kGy, at a rate of 10kGy/hr. Isopropanol was added to consume the excess of oxidizing species produced by irradiation and form stable secondary radicals. The influence of …

Development Of A Shared Earth Model To Investigate Potential For Carbon Dioxide Sequestration In The Springfield Area, Mo, Imowo Celestine Akpan

Masters Theses

"Carbon dioxide (C0₂) sequestration has been extensively implemented and explored predominantly in depleted oil reservoirs and deep saline aquifers where the C0₂ is stored under supercritical conditions. A lesser explored option with great potential is based on injection into shallow reservoirs where the C0₂ may not always be in its denser supercritical state. The research evaluates the potential for injecting C0₂ into saline aquifers at depths of ~550-650 meters and formation temperatures of -22⁰C.

To evaluate injectivity and cap rock integrity, reservoir and geomechanical simulations need to be conducted separately and subsequently coupled. A Shared Earth Model is developed utilizing …

Evaluation Of The Reagan And Lamotte Sandstones In Southwestern Missouri For Carbon Dioxide Sequestration, Todd Jeffrey Miller

Masters Theses

"Carbon dioxide sequestration has been proposed as a way to reduce anthropogenic carbon dioxide emissions. Several characteristics are required in order for a geologic formation to be suitable for sequestration. There must be an impermeable confining layer to restrain CO₂ migration toward the surface, the porosity and permeability must be high enough to allow for long term injection and substantial storage capacity, and the formation must be strong enough for long term injection to occur without inducing fractures. In this work, The Reagan and Lamotte Sandstones near Springfield, Missouri were evaluated for the potential for carbon dioxide sequestration. The Derby-Doe …

Displacement Of Heavy Oil By Carbon Dioxide In A Tube, Mohammed Almabrouk Ali Ahmad

Masters Theses

"After using primary and secondary oil recovery methods, about two third of the original oil in place is left behind in the reservoir. Enhanced oil recovery (EOR) methods are being used to recover that oil. CO₂ flooding is one of the EOR methods that is used to recover the oil. The interest here lies in recovery of heavy oils. The dissolution of CO₂ in oil reduces oil viscosity and swells it, making it easier to displace the oil. FLUENT is used to solve the problem of CO₂ displacing heavy oil in a tube. Different velocities/capillary numbers (Ca) and …

Effect Of Lipid Composition On The Physical Properties Of Liposomes: A Light Scattering Study, Rajiv Kumar Yandrapati

Masters Theses

"The aim of this study was to investigate the effect of lipid composition on the physical properties of liposomes. Eight different types of liposomes were prepared for this study. Liposomes consisting of phosphatidylcholine (PC) and cholesterol were prepared in three different compositions 80/20, 50/50 and 20/80 respectively. Similarly liposomes consisting of PC and negatively charged phosphatidylserine (PS) were also prepared in three different compositions 80/20, 50/50 and 20/80 respectively. Two liposomes with the compositions 2:2:1:1 (cholesterol:PC:phosphatidylglycerol (PG): phosphatidylethanolamine (PE) ) which resembles the myelin membrane and 10:5:7.5:16 (PC:PE:PS:cholesterol) which mimics rat's neural membranes were also prepared. The liposomes were prepared …

Direct Shear Testing Of Fractured Rocks From Missouri Used To Evaluate Potential Fault Reactivation Induced By Carbon Dioxide Sequestration, Ishan Kumar

Masters Theses

"Geological storage projects of CO₂ are designed to maintain secure storage for thousands of years. Carbon Capture and Storage has been identified as one of the methods which is used to reduce global emission of CO₂ and achieve lower concentration of CO₂ in the atmosphere by capturing the CO₂ from the flue gases and storing it in underground formations. Potential leakage of injected CO₂ from the reservoir to the surface is caused by the reactivation of pre-existing faults and fractures which is caused by the change in the state of stresses and the pore pressure. To avoid damage to the …