Biomedical Engineering and Bioengineering Commons^™

Sustainable Cement-Blast Furnace Slag Mortar, Richa Jain, Harshit Jain, Ashish Nim

Journal of Sustainable Construction Materials and Technologies

New building materials that required and produced less energy are need of today's infrastructure development. The ability of such building materials to promote sustainable development always puts its demand in active mode. With huge consumption of naturally occurring materials in building construction, the problem related to environment degradation is now common for world. Along with this, world is also facing the problem of reuse, recover and scientifically approved disposal of non-biodegradable wastes. Blast furnace slag (BFS) is one of those steel industry wastes that are abundantly available and their disposal arises as prime challenge for industries. This research work makes …

Impact Of Glass Powder As A Sustainable Material On The Workability, Strength, And Durability Properties In High-Performance Basalt Fiber Reinforced Concrete: A Statistical Analysis, Ahmed Fathi Mohamed Salih

Journal of Sustainable Construction Materials and Technologies

The global construction sector is increasingly challenged to balance environmental sustainability with the growing demand for durable, high-performance materials. As cement production continues to be a major source of anthropogenic CO2 emissions, the incorporation of alternative, low-impact binders has become a key strategy for reducing the environmental footprint of concrete. In this context, glass powder (GP)—a finely ground industrial by-product rich in amorphous silica—has emerged as a promising partial replacement for Portland cement. Its pozzolanic reactivity contributes to improved hydration and matrix densification, while its use also supports circular economy principles by diverting waste glass from landfills. At the same …

Development Of An Automated Platform For Cell Biology Experiments, Dipendra Nepal

Shelby Hall Graduate Research Forum Posters

Cell biology experiments involve repetitive tasks such as pipetting, sample preparation, and imaging, which are typically performed manually. These manual processes can introduce variability, reduce efficiency, and increase the cost of biomedical research. To address these challenges, our lab is developing a modular robotic platform, iEye™, to automate key steps in cell biology workflows [1]. The system is designed as self-contained modules, allowing flexible development and integration of different functionalities. In this work, we focus on a sample preparation module that integrates a 6-degree-of-freedom robotic arm, a motorized stage, and a pneumatic pipetter. This module is being developed to automate …

Balancing Carbon Emissions In Façade Of Residential Buildings Through Bim-Lca: A Comparative Analysis Of Insulation Materials, Mehran Alipour

Journal of Sustainable Construction Materials and Technologies

Thermal insulation materials play a significant role in balancing buildings' total carbon emissions. Balancing involves applying the optimized amount of insulation materials to avoid excessive emissions in either the operational or embodied phases. Due to the wide range of insulation materials and variations of their specifications, it is vital to analyse them individually. The focus of this study is to optimize the amount of insulation materials in the facades of Residential Buildings (RB) to balance the amount of Operational Carbon Emissions (OCE) and Embodied Carbon Emissions (ECE) by applying the Building Information Modelling-Life Cycle Assessment (BIM-LCA) integration method. The Life …

Integrating Sustainable Material Procurement In Construction Waste Management: A Systematic Review With Narrative Synthesis For The Libyan Construction Sector, Ramzi Fouzi Hamad Abdullah, Safaa N Saud Al-Humairi, Zunirah Binti Mohd Talib

Journal of Sustainable Construction Materials and Technologies

Integrating sustainable material procurement with construction waste management is essential to reduce construction and demolition waste in Libya, where current practices remain largely reactive and disposal-oriented. This narrative review aims to develop a conceptual framework linking procurement decisions to waste-generation pathways in Libyan construction projects, clarifying how proactive, sustainability-driven purchasing can serve as a primary driver of waste prevention. Using a PRISMA-guided systematic search of Web of Science, Scopus, and IEEE Xplore for 2001–2026, and a bibliometric analysis via VOSviewer, 956 high-quality studies were synthesized to map global knowledge and to expose the paucity of integrated SMP–CWM studies in developing …

Sound Insulation Performance Of Sustainable Lc3 Mortars With Barite And Waste Rubber Aggregates, Begüm Söyek Abay, Leyla Tanaçan

Journal of Sustainable Construction Materials and Technologies

This study investigates the potential of limestone calcined clay cement (LC3) as a sustainable binder for developing a single-layer composite material incorporating barite and rubber aggregates, hypothesized to achieve enhanced sound insulation performance compared to conventional multi-layered wall systems. Mortars were prepared using LC3 with 55% clinker, 30% metakaolin, 15% limestone, substituting 45% of cement clinker. Hybrid mixtures of barite and rubber aggregates (barite-to-rubber volume ratios of 2:1 and 1:2) were tested at aggregate-to-binder ratios of 2.0, 2.75, and 3.5 to evaluate their combined mass and damping effects on acoustic performance. Experiments were conducted to determine physical, mechanical, and acoustic …

From Lime To Geopolymers: Emerging Trends And Advances In Sustainable Soil Stabilization, Favour Chukwuebuka Egwu, Amin Eisazadeh

Journal of Sustainable Construction Materials and Technologies

Soil stabilization remains a critical challenge in geotechnical engineering, particularly for weak and expansive soils that compromise the safety and serviceability of infrastructure. Traditional stabilizers such as lime and cement have been widely applied; however, their limitations in terms of long-term durability, carbon footprint, and performance under aggressive environmental conditions necessitate alternative approaches. In recent years, geopolymer-based stabilizers derived from industrial by-products such as fly ash (FA), slag, and bottom ash (BA) have emerged as promising substitutes. This review critically examines the comparative performance of lime and geopolymer stabilization with respect to strength development, durability, compressibility, environmental impact, and economic …

Investigating The Behavior Of Self-Compacting Concrete Containing Scms And Recycled Fine Aggregates, Sachin Tiwari, Mahakavi P

Journal of Sustainable Construction Materials and Technologies

This study addresses the unresolved gap in quantifying how recycled fine aggregates (RFA) and metakaolin (MK) interact synergistically in self-compacting concrete (SCC), a relationship that previous works have studied only in isolation or without mechanistic justification. Twenty-five SCC mixtures containing MK (0–25%) and RFA (0–100%) were evaluated to generate a unified understanding of fresh behaviour, strength development, pore refinement, interfacial transition zone (ITZ) characteristics, and sustainability indicators. Results show that RFA alone increases water demand and reduces strength, while MK compensates for these losses by densifying the matrix and improving ITZ bonding, as confirmed through SEM analysis. An optimum synergy …

Mechanical Characterization And Modeling Of Rat Myocardia Under The Influence Of Epirubicin, Abdallah Mahmoud Alkhaiyat

Theses and Dissertations

Cancer remains a predominant health challenge that is responsible for a significant portion of global morbidity and mortality. Epirubicin (EPI), a chemotherapeutic anti-cancer drug, has shown remarkable efficacy in combating various malignancies. However, it is known to have undesirable side effects on the heart, collectively referred to as cardiotoxicity. This research investigates the adverse effects of chemotherapy on cardiac contractility through an in vitro examination of the mechanics of healthy and infarcted animal heart tissues. Electrically stimulated slices of rat ventricular tissue were tested using an isometric force measurement tissue bath. The tissue slices were subjected to uniaxial stretching, allowing …

A Virtual-Reality-Based Dental Simulator For Endodontics With Automated Formative Feedback, Yousef Salah Abo El Ela

Theses and Dissertations

Advancements in virtual reality (VR) and haptic technology are transforming the landscape of medical and dental education, offering new avenues for safe, immersive, and repeatable training experiences. Within dentistry, endodontics presents unique challenges for preclinical education due to anatomical complexity, limited access to extracted teeth, ethical concerns, and the shortcomings of conventional plastic models. Despite endodontics specific plastic teeth being available, they fall short of replicating the hardness of real extracted teeth, are relatively costly compared to generic plastic teeth, and are ultimately a disposable item which makes them inadequate as a sustainable long-term solution. Extracted teeth do a much …

Capturing Sclera Anisotropy Using Direct Collagen Fiber Models: Linking Microstructure To Macroscopic Mechanical Properties, Fengting Ji, Xuehuan He, Frederick Sebastian, Mohammad R. Islam, Hannah Schilpp, Bingrui Wang, Yi Hua, Rouzbeh Amini, Ian A. Sigal

Mechanical Engineering Faculty Publications

Collagen fibers are essential to the mechanical behavior of soft tissues, including sclera. Conventional models often represent these fibers statistically, potentially missing crucial aspects of their role in tissue behavior. In this study, we expand on a direct fiber modeling approach that we recently presented based on explicitly representing the sclera long, interwoven fiber bundles. Specifically, our goal was to capture specimen-specific 3D fiber architecture and anisotropic mechanics of four ovine sclera samples (superior from Eye-1, temporal and superior from Eye-2, and temporal from Eye-3), each tested under five conditions: equi-biaxial (1:1) and four non-equi-biaxial (1:0.75, 0.75:1, 1:0.5, and 0.5:1). …

Influence Of Motion Artifacts On Instantaneous Frequency Based Heart Rate Variability Of Arterial Pulse Signals Measured By A Tactile Sensor: An Analytical Study, Mamun Hasan, Zhili Hao

Mechanical & Aerospace Engineering Faculty Publications

Objective: Heart rate variability (HRV), quantified via the instantaneous frequency (IF) of arterial pulse signals, is a key indicator of cardiovascular (CV) regulation. This study presents a theoretical and experimental investigation of how motion artifacts (MA) influence IF-and thus HRVmeasured with a tactile sensor, emphasizing underlying mechanisms rather than population-level validation. Approach: Building on a previously developed single-degree-of-freedom (SDOF) model of the tissue-contact-sensor (TCS) stack between the sensor and the artery, MA is represented as low-frequency baseline drift and time-varying system parameters (TVSP) of the TCS stack. Analytical expressions quantify the effect of MA on the IF of each harmonic …

Radical-Based Oxidative Pretreatment Enhances Biofuel Production From Lignocellulosic Biomass Via Hydrothermal Liquefaction, João Vitor Dos Santos, Louis C. Bondurant, Patrick G. Hatcher

Chemistry & Biochemistry Faculty Publications

The sustainable production of biofuels from lignocellulosic biomass is a central goal in the transition to low-carbon energy systems. However, hydrothermal liquefaction (HTL), a promising thermochemical conversion pathway, is constrained by the high oxygen content and complex aromatic structure of lignin, which lowers bio-oil quality. Here, we used a model system of brown-rot-degraded white oak (Quercus alba) to test whether radical-based oxidative pretreatment could enhance HTL performance by converting lignin into more aliphatic intermediates. Oxidation was performed under simulated Fenton conditions using fixed Fe(II) (60 ppm) and two hydrogen peroxide concentrations (3 and 8 M), resulting in extensive lignin depolymerization …

Combining Haptic Feedback With Electromyography To Study Knee Injury In Stationary Cycling, Christopher Kirby

Honors Theses

Patellofemoral Pain Syndrome (PFPS) is the most prevalent overuse injury in cycling, often linked to altered neuromuscular activation patterns of the quadriceps and hamstrings. While sensory feedback has successfully modified cyclists posture, there is a critical lack of evidence-based interventions targeting the underlying muscle activation imbalances associated with chronic knee pain. This study aimed to develop and validate a novel, real-time biofeedback system that utilizes electromyography (EMG) to trigger vibrotactile cues, aiming to shift muscle onset timing earlier in the pedal stroke to mitigate PFPS-related imbalances. A closed-loop system was engineered by integrating a Delsys EMG system with a SageMotion …

The Development And Implementation Of A Computational Framework To Simulate Patellofemoral Joint Mechanics, Mahmood Rashedi

Master’s Theses

Anterior knee pain affects approximately 25% of adults and is associated with altered joint mechanics. Patellofemoral joint (PFJ) models vary widely in complexity, with no established gold standard. Musculoskeletal models efficiently estimate joint loading but do not capture tissue-level mechanics, whereas finite element (FE) models provide tissue-level predictions at greater computational cost. This thesis developed a workflow to evaluate relationships between musculoskeletal model-predicted PFJ loads and FE-predicted cartilage mechanics, examined the impact of altered quadriceps activation, and introduced improved computational models.

Marker trajectories and ground reaction forces were collected from four adults (2 male, 2 female) during walking and squatting. …

Microgravity-Induced Alterations In Left Atrial Hemodynamics And Thrombogenic Risk: Insights From Healthy And Atrial Fibrillation Models, Grace M. Hoeppner

Dissertations, Master's Theses and Master's Reports

Background: Microgravity exposure alters cardiovascular loading, yet its impact on left atrial flow dynamics and thrombotic risk remains poorly understood. This study investigates how spaceflight-relevant microgravity-induced changes in cardiac outflow affect left atrial hemodynamics in healthy individuals and patients with atrial fibrillation.

Methods: Patient-specific left atrial models were generated for three healthy individuals and three AF patients. Computational fluid dynamics (CFD) simulations were performed using each patient’s baseline mitral outflow waveform and two modified waveforms representing short- and long-duration post-flight cardiac loading changes derived from echocardiographic observations. Hemodynamic metrics included left atrial velocity, time averaged wall shear stress, oscillatory shear …

Computational Modeling Of Bubble Dispersion In Alginate Hydrogel Foams For Radiologically Equivalent Biomedical Phantoms, Godson N. Brako

Graduate Studies Theses and Dissertations 2026

The foaming of hydrogels presents a promising strategy for tailoring mechanical and radiological properties to replicate biological soft tissues for biomedical phantoms. Achieving uniform and predictable void fraction distributions in alginate hydrogel foams remains a challenge due to the complex interplay between bubble dynamics, matrix rheology, and interfacial forces during the pre-gelation aeration stage. This thesis develops a Computational Fluid Dynamics framework using the transient Eulerian two-fluid approach to predict void fraction distribution in alginate hydrogel precursor solutions aerated by air injection through a bottom nozzle. The objective is to use the framework for design of the foaming system to …

Effect Of Local Steel Slag Incorporation On The Mechanical Properties Of Concrete, Ahmed Safaa Tariq Karmah, Wissam Khadum Alsaraj, Luma A. Zghair

Al-Esraa University College Journal for Engineering Sciences

The increasing interest in the production of concrete through the utilization of inexpensive materials has caused a rise in the number of studies concerning the use of materials with cementitious properties, such as Silica Fume, Slag, Fly Ash and other pozzolanic materials. Moreover, the increasing amounts of Steel Slag being produced from local factories that are being deposited without an available method of disposal provides an opportunity to harness the Slag in the production of an inexpensive, and possibly better concrete. Slag has been used as both an addition and substitution of the cement and fine aggregate. The mixtures included …

Decoding Climate Change: A Comprehensive Statistical Insight Into Temperature Anomalies In Iraq And Its Neighboring Countries, Jameel T. Al-Naffakha, Mohammed R. Al-Qassabanda, Israa Jafar

Al-Esraa University College Journal for Engineering Sciences

This study applies advanced statistical techniques, including the Mann-Kendall Trend Test and ARIMA forecasting, to validate and predict temperature anomalies across Iraq and its neighboring countries (2014–2024). Findings confirm a statistically significant warming trend (p < 0.00000005) across all nations, with Syria (1.02°C) and Turkey (0.97°C) experiencing the highest anomalies. GIS-based spatial analysis highlights regional disparities, identifying climate-vulnerable zones. The persistent rise in temperature anomalies correlates with worsening water scarcity, desertification, and extreme weather events, including prolonged droughts and heatwaves. Iraq’s peak anomaly (1.48°C) has exacerbated heat stress, agricultural decline, and reduced river inflows, while Kuwait and Saudi Arabia struggle to maintain critical infrastructure under record-breaking temperatures exceeding 50°C. These climate shifts pose severe risks to water availability, food security, and energy demand, necessitating urgent policy interventions. Key recommendations include enhanced water resource management, climate-adaptive agriculture, and renewable energy expansion. If left unaddressed, rising temperatures could destabilize the region, increasing socio-economic vulnerabilities and escalating resource conflicts. This study underscores the need for cross-border collaboration and sustainable adaptation policies to mitigate the long-term impacts of climate change in the Middle East.

Optimal Power Flow Control In The Iraqi Power Grid Using Artificial Intelligence Algorithms For Carbon Emission Reduction, Mohammed Shakir Juber

Al-Esraa University College Journal for Engineering Sciences

Iraq’s power sector remains in a protracted and severe crisis characterized by a significant mismatch between supply and demand, high levels of losses during transmission and distribution, as well as an increasing challenge to the resources base being largely unfavourably. These inefficiencies impose heavy costs on the national economy in excess of 40 billion annually and they also reinforce greenhouse gas emissions, and exacerbate environmental issues. To deal with these problems, we proposed in this paper that a new hybrid AI tool should be developed for the solution of multi-objective optimization problem based on purpose Genetic Algorithm (GA) merger with …

Applying Machine Learning Techniques For Early Detection Of Cyber Attacks On Iot Devices, Noor Adnan Allamy

Al-Esraa University College Journal for Engineering Sciences

This research designs, implements, and evaluates a machine learning-based framework for the early detection of cyber attacks targeting Internet of Things (IoT) devices, with a specific focus on the context and challenges present in Iraq. The study conducts a comparative analysis of three supervised learning algorithms—Support Vector Machine (SVM), Random Forest (RF), and Deep Neural Networks (DNN)—using a combination of benchmark datasets (NSL-KDD, CIC-IDS-2017, Bot-IoT) and a synthesized dataset adapted to simulate the Iraqi threat landscape. Key performance metrics, including accuracy, precision, recall, and F1-score, were used for evaluation. The proposed Random Forest model demonstrated superior performance, achieving an accuracy …

Ai-Enhanced Heat Transfer Optimization In Magnetic Bio-Nanofluids, Hasan Attyah Shaboot

Al-Esraa University College Journal for Engineering Sciences

This study presents a hybrid Artificial Intelligence–Computational Fluid Dynamics (AI-CFD) framework for optimizing heat transfer in magnetic bio-nanofluids subjected to external magnetic fields. Magnetic bio-nanofluids, composed of biocompatible base fluids containing superparamagnetic nanoparticles, exhibit tunable thermal and flow behavior, making them promising for biomedical and micro-cooling applications. Conventional optimization methods based on experiments or brute-force CFD are computationally expensive and limited in exploring the full design space. To overcome these challenges, an Artificial Neural Network (ANN) surrogate model was developed to predict two key performance indicators, the Nusselt number and the friction factor, with high accuracy (R² > 0.997). The surrogate …

Hybrid Experimental–Computational Study On The Energy Absorption Of Graphene Nanoplatelet-Reinforced Sandwich Structures, Hamdan Yousif Hamdan

Al-Esraa University College Journal for Engineering Sciences

Background: Sandwich composites are widely used in aerospace, automotive, and marine applications because of their lightweight, stiffness, and strength, but they remain prone to out-of-plane impacts and barely visible impact damage (BVID). Graphene Nanoplatelets (GNPs) have shown strong potential to improve fracture toughness and impact resistance. However, hybrid experimental–computational studies applying such reinforcement are still lacking in developing contexts like Iraq, where practical and accessible solutions are essential. Aims: The study investigates the effect of GNP reinforcement on the low-velocity impact behavior and energy absorption of glass fiber/epoxy sandwich panels with PVC foam and balsa wood cores. Objectives include fabricating …

Effect Of Thick Closed Walls Of West And South Elevations Of Iraqi Middle And South Territory Housing Building On Reducing Energy Use, Abeer Qasim Jbur, Shaimaa M. Hamza, Mayyadah Lutfi Abdulwahhab

Al-Esraa University College Journal for Engineering Sciences

Thermal insulation is one of the most important factors in achieving sustainability, increasing efficiency, and reducing energy consumption, but modern insulation materials are expensive, in addition to their availability. Therefore, through our research, we resorted to investigating the issue of reducing thermal load in buildings through the use of thick-walled facades in the southern and western facades, where we studied a building with two windows with windows on the southern and western facades and another without these windows and with thick walls, for two locations, the first in central Iraq, which is the city of Baghdad, and the second in …

The Impact Of Ethyl Levulinate Additive On Diesel Engine Performance And Emissions: An Experimental Study, Maha Ali Ghadbaan

Al-Esraa University College Journal for Engineering Sciences

This study explores the environmental and operational impact of adding Ethyl Levulinate—a biodegradable ester derived from biomass—to diesel fuel. A fuel blend known as B5El6 (comprising 5% biodiesel and 6% Ethyl Levulinate) was prepared and tested experimentally using a single-cylinder diesel engine operating at a constant speed of 1500 rpm under full load conditions. Performance metrics and emission data were recorded, and a Life Cycle Assessment (LCA) was conducted using the IMPACT2002+ methodology.

The results revealed that B5El6 significantly reduced greenhouse gas emissions (100 kg CO2 eq) and improved ecosystem quality. However, it presented challenges in terms of human health …

The Role Of The Scenario In Formulating The Contemporary Architectural Text, Rounaq Arif Mohsin, Abbas Ali Hamza, Bashar Shamil Alkhafaji

Al-Esraa University College Journal for Engineering Sciences

In order to create an integrated architectural text, which is a complicated art that blends beauty and practical elements, a rigorous design procedure is necessary. In this situation, the scenario’s role becomes crucial in developing the current architectural text and directing architectural approaches. In order to better understand how the scenario influences the design process and the interactions between various architectural aspects, this project intends to explore and analyze the impact of the scenario in developing and refining architectural text formulation approaches.

The study looks at the idea of a scenario and how it has been used in architecture, as …

Investigation Of Some Physical Properties Of Slurry Infiltrated Fibrous Concrete (Sifcon) Under Different Curing Times, Rand Kh. Mahmoud, Mohmmed Juad Khadhim, Fayq Hasan Jabbar

Al-Esraa University College Journal for Engineering Sciences

This research studied the effects of different types fibers (Basalt, Carbon and Basalt-Carbon hybrid mix) and curing ages (7, 14, 28 and 56 days) on some physical properties of - Slurry infiltrated fibrous concrete (SIFCON). Density, ultrasonic pulse velocity UPV, Poisson’s ratio and water absorption were measured for the experimental study with 30% cement replacement by Class F fly ash to increase sustainability. It was found that properties were significantly affected by the type and dosage of fiber admixture. The UPV was enhanced by basalt fibers and the absorption reduced up to an optimal range of 3–5% after which agglomeration …

Mechanical And Durability Properties Of Cement Panels Reinforced With Hybrid And Pva Fibers, Shukran H. Faraj, Mohammed J. Kadhim

Al-Esraa University College Journal for Engineering Sciences

This study examines the synergistic effects of hybrid fibers (HF) and polyvinyl alcohol (PVA) fibers on the structural and thermal properties of silica-fume cement panels. Scanning electron microscopy (SEM) was employed to examine mortar mixtures with varying fiber content to assess their enhancement of microstructure. We conducted several experiments on compressive, flexural, and splitting tensile strength, in addition to water absorption and thermal conductivity. The results indicate that 1% HF exhibits superior mechanical qualities, with a compressive strength of 46.89 MPa, a flexural strength of 8.56 MPa, and a reduced thermal conductivity of 0.83 W/m•K. PVA fibers at 2% enhance …

Experimental Analysis Of Droplet Deformation Dynamics In Combined Dc Electric And Shear Flow Fields Using Dpiv, Ayad Ibrahim Khlewee

Al-Esraa University College Journal for Engineering Sciences

This paper presented a systematic study of such droplet deformation at the intersection of uniform DC electric field and hydrodynamic shear flow, in which we focused on conductivity ratio (R) and permittivity ratio (S), describing their influence. The results demonstrate that droplet dynamics is extremely sensitive to the regime: under DC only, either elongation or compression depending on whether R > S or R S, similarly to classical EHD predictions. Under shear-only conditions, deformation was dictated by the balance of elongational stresses (EC) and rotational stresses (RC), with increasing capillary number (Ca) leading to progressive elongation and oscillatory orientation dynamics. When …

The Imaginary In Architecture: The Conceptual Structure Of The Imaginary And Its Manifestations In Architectural Text, Noora Ghadir Hlail, Abbas Ali Hamza Al Greiza

Al-Esraa University College Journal for Engineering Sciences

This study explores the concept of the imaginary as a collective cognitive and cultural structure that shapes symbolic reality through images, myths, and deeply rooted symbols in collective memory. The research applies this concept within the field of architecture, aiming to understand how the imaginary is embodied in architectural texts as symbolic carriers of identity and cultural meaning. Adopting a descriptive-analytical methodology, the study develops a theoretical framework comprising key components—preconditions, mechanisms, and traits of the imaginary—and applies it to two selected case studies: the General Secretariat of the Iraqi Council of Ministers and the Louvre Abu Dhabi Museum. The …