Biomedical Engineering and Bioengineering Commons^™

Beneficial Investigation Of Sustainable Recycled Waste Plastic In Treating The Consolidation Behavior Of Fine Soil, Aram Mohammed Raheem, Cumaraswamy Vipulanandan, Mohammed Hiwa Abdullrahman, Ali Tariq Omer

Journal of Sustainable Construction Materials and Technologies

Recycled waste plastic is one of the regular garbage utilized as a sustainable material in soil remediation. This study examines the efficacy of utilizing local recycled waste plastic as an ecological quantifiable along with soil containing fine particles to analyze the consolidation behavior. Various recycled waste plastic contents ranging from 2% to 10% were employed experimentally in two patterns where in the first pattern the recycled waste plastic were mixed as dry material with the fine soil particles while in the second pattern a sandwich layer of 10% of the recycled waste plastic was placed in the middle of the …

Enhanced Thermal Energy Storage In Buildings: Impregnation, Leakage, And Environmental Performance Of Organic And Inorganic Pcm Composites, Gökhan Genç, Esra Yılmaz, M. Yusuf Yazıcı

Journal of Sustainable Construction Materials and Technologies

This study experimentally investigates the impregnation and leakage performance of various organic (tobacco, sawdust, bay leaf, black cumin) and inorganic (vermiculite, perlite, bentonite, sepiolite) carrier materials used for phase change material (PCM) integration in building applications. The commercial paraffin-based PCM RT-31 was used as the thermal storage medium. Impregnation and leakage tests were conducted to evaluate the PCM absorption capacity, form stability, and energy storage potential of each carrier. The results revealed that perlite (C = 80%) and bay leaf (C = 78%) exhibited the highest impregnation capacities due to their porous and fibrous structures; however, they also demonstrated significant …

Modeling Of Tensile Stress-Strain Response For Steel Fiber Reinforced Self-Compacting Concretes, Anıl Niş, Nilufer Özyurt, Turan Özturan

Journal of Sustainable Construction Materials and Technologies

Main aim of the research was to further understand self-compacting concrete reinforced with steel fibers (SFR-SCC) behavior and to contribute modeling of the tensile stress-strain diagrams for the standardization of the fiber reinforced materials for structural utilization. Fiber reinforced materials has not been used without structural rebar because of the absence of stress-strain curve in tension required for the structural design codes. Hence, an inverse analysis (multi-layer model) was further modified for various steel fibers to predict tensile stress-strain behaviour. For this purpose, 5 different mixes; control, reinforced with long fibers with 0.5% and 1%, short fiber with 0.5% and …

Moisture-Induced Degradation And Mechanical Durability Of Mineral-Filled Polylactide (Pla) Composites, Barbara Szaraniec, Aleksandra Ptaszkowska, Alicja Rapacz-Kmita

Journal of Sustainable Construction Materials and Technologies

This study investigates the influence of mineral fillers on the hydrolytic stability and mechanical durability of polylactide (PLA) composites under accelerated aqueous ageing conditions. Composites containing halloysite nanotubes (HNT) and bentonite-based fillers (BM, BS, BSP) at 2 wt.% were prepared using a powder-coating and injection moulding approach. Accelerated hydrolytic degradation was conducted at 50 °C for up to six weeks. The degradation behaviour was evaluated through mass variation, water absorption, incubation medium analysis (pH and electrical conductivity), mechanical testing, surface observations, and contact angle measurements. The results revealed a clear filler-dependent response. Bentonite-filled composites exhibited increased water absorption and accelerated …

Comparative Analysis Of Leaflet Materials, Stent Materials, And Stent Cell Density For Bileaflet Transcatheter Mitral Valve Design, Joseph Chibuike Nwokeafor, Joshua D. Hofmeister, Breandan B. Yeats, Lakshmi Prasad Dasi, Charanjit S. Rihal, Juan A. Crestanello, Leigh Griffiths, Mohamad A. Alkhouli, Hoda Hatoum

Michigan Tech Publications

Background: The biomechanical performance of bileaflet transcatheter mitral valves (TMVs) depends on complex interactions between leaflet material behavior and stent design. However, the contributions of leaflet materials and constitutive models, stent materials, and stent geometry to valve function and durability remain poorly understood. Methods: A parametric finite element study was conducted using a CAD model of a bileaflet TMV subjected to physiological pressure loading. Five leaflet material models were evaluated: 3 glutaraldehyde-fixed tissues—bovine pericardium (BP; FBP1, FBP2) and porcine pericardium (PP; FPP)—and 2 unfixed tissues—bovine (UBP) and porcine pericardium (UPP). BP was modeled as a linear elastic (FBP1) and Ogden …

Applications Of Geosynthetics In Tunnels Construction: A Sustainable Approach To Carbon Footprint Reduction, Ibraheem Rais, Abdullah H. Alsabhan, Md. Rehan Sadique, Shamshad Alam

Journal of Sustainable Construction Materials and Technologies

The use of geosynthetics has transformed tunnelling practices by enhancing structural integrity, durability, and environmental sustainability. This review adopts a systematic literature review design, covering publications from 2000 to 2025 sourced from Scopus, Web of Science, ScienceDirect, and Google Scholar. The selected studies were screened based on relevance, quality, and focus on tunnelling applications, then thematically analyzed into four domains: geosynthetic types, applications, sustainability, and performance evaluation. This review focuses on the applications of various geosynthetics, including geotextiles, geogrids, geocomposites, geocells, and geomembranes, in tunnelling projects. These materials play crucial roles in reinforcing tunnel walls and slopes, improving load distribution, …

Development Of A Video-Based Tool To Measure Motor Asymmetry In Infants At Risk For Hemiparesis, Roha Ali

Master's Theses

Congenital hemiparesis is a unilateral motor impairment stemming from brain injury in utero or early postnatally. Hemiparesis can be difficult to detect in early infancy with current clinical tools. Yet, early identification of motor asymmetry could play a key role in the design of effective early intervention and rehabilitation strategies. This thesis presents the development and validation of a video-based tool designed to extract infant limb movement data using DeepLabCut’s (DLC) machine learning network. The pipeline was developed using videos of typically developing (TD) infants and infants with Asymmetric Perinatal Brain Injury (APBI), all at or under 3 months corrected …

Bowl-O-Matic, Nathan Lin, Luis Torres, Jill Worthington, Aiden Foote

Mechanical Engineering

Adaptive physical education presents the unique challenge of accommodating individuals with diverse physical and cognitive abilities. Instructors and program designers must often integrate specialized equipment, fixtures, or features to ensure activities remain safe, inclusive, and user-friendly. Beyond accessibility, adaptive physical education highlights the importance of empowerment— enabling every participant to experience personal growth, confidence, and connection through movement. Friday Club, a local San Luis Obispo program supported by Cal Poly’s Kinesiology Department, embodies these values by providing adaptive physical activities that promote health and well-being for individuals with varying abilities. One of the most popular and regularly held activities is …

Cathy’S Catcher, Marlee Scott, Regen Worsley, Alessandra Valenzano, Aviv Ben Zeev

Mechanical Engineering

Deep-sea fishing presents significant challenges for individuals with upper-limb differences, particularly when using prosthetic devices that are not designed for recreational fishing activities. This project developed a custom prosthetic fishing rod attachment for a user who had lost her forearm and desired a safe, comfortable, and independent method of fishing. Through interviews with the sponsor and an iterative design process, a lightweight aluminum attachment was created to interface directly with the user's existing prosthetic quick-connect system.

The design process included concept generation, CAD modeling, rapid prototyping with 3D-printed models, manufacturing, and user-centered refinement. The final design consists of a welded …

Characteristic Stress And Strain Optimization Of Cardiovascular Catheters With Laser-Cut Hypotubes Using Finite Element Analysis, Kyle E. Hirth

Master's Theses

Cardiovascular catheter systems rely on laser-cut hypotubes to balance flexibility and structural integrity required for minimally invasive surgical procedures.  Optimizing these mechanical characteristics remains a significant challenge.  This study aims to investigate the influence of key laser-cut geometric parameters on the mechanical performance of hypotubes through finite element analysis.

Commercially representative laser-cut hypotubes were modeled and a finite element model was developed.   Geometric design parameters were varied across a design space consisting of pitch values ranging from 0.006 in. to 0.018 in. and cuts per revolution (CPR) ranging from 2.5 – 4.5.  For each pitch and CPR combination, loading stiffness …

Du Undergraduate Showcase Abstracts: Research, Scholarship, And Creative Works, Sophia Wismar, Henry Staats, Allison Metzler, Chloe Puckett, Rachel Levine, Christa Kilpatrick, Scott Wolf, Joe Walsh, Grace Doolittle, John Engebreston, Zoe Lopez, Christopher Aaby, Audrey Duff, Timothy Sisk, Katelyn Lamberton, Angela Narayan, Gilkah Argueta, Habiba Samir, Girena Tesfazghi, Genet Kenore, Sinit Tesfamariam, Effley Brooks, Abi Newell, Megan Doherty, Natalie Baer, Lexi Blood, Talya Riciputi, Jessica Jimenez, Devin Hernandez, Lynn Clark, Taj Kumar, Sunil Kumar, Allen Rutman, Mira Pronobis, Tess Carson, Anna Sher, Frankie Stroud, Tamra Pearson D'Estree, Alyssa Wilson, Emily Melnick, Jenalee Doom, Yihang Gao, Gwendolyn Geiger, Noah Gettle, Scott Nichols, Clare Ayoub, Cara Dienno, Sunny Walker, Zoe Hansen, Maya Wheeler, Addison Rice, Patrick Martin, Sanjana Acharya, Daniel Mcintosh, Amanda Mckellips, Calli Cain, Justin Blake, Peter Sokol-Hessner, Natalie Miller, Max Weisbuch, Sophia Dellota, John Macikas, Charlotte Snow, Mark Siemens, Zoe Lynch, Alex Huffman, Prachi Shah, Jason Roney, Halcyon Levi, Nicole Herzog, Andrea Koly, Daniel Linseman, Annie London, Xi Yang, Avery Zwisler, Jane Smith, Chaz Contag, Michael Kerwin, Lucy Rand, Grace Schroeder, Michelle Rozenman, Nissa Tapper, Guiming Zhang, Mateo Mazariego-Halpern, Keith Meyer, Julie Do, Dakota Park-Ozee, Travis Herink, Kara Neu, Jonathan Plomin, Eve-Odine Duchaufour, Debbie Gale Mitchell, Tennyson Anderson-Stricklin, Lily Treitz, Samantha Rosenberger, Sierra Griffith, Finley Joseph, Daniel Sampson, Emmy Davis, Skyler Kasnoff, Evon Lopez, Vivian Nguyen, Cassy Young, Franklin Sellner, Martin Tobon, Ila Graham, Zach Billings, Holden Hedit, Decatur Boland, Paul Kosempel, Cory Chandler, Jay Mahoney, Sam Dragan, Susan Dagget, Yarrow Ator, Heidi Vuletich, Owen Weber, Andrew Kloeppel, Petersen Gray, Mandi Schaeffer-Fry, Razleen Bassra, Bryanna Rodriguez, Christina Blue, Taubie Sanders, Rachel Epstein, Luke Milburn, Camryn Evans, Ezra Martinez, Mary Westwood, Gabri Notov, Robin Tinghitella, Lilou Cabrol, Eli Barbour, Juliet Mendik, Selma Myers, Zac Wise, Noah Fahlin, Michelle Knowles, Abigail Hopper, Michael Greenberger, Romi Laclair, Sarah Watamura, Sabrina Efroymson, Casey Barker, Sydney Seltzer, Bryn Yehle, Jennifer Hoffman, Sara Garcia, Ryuka Nagamine, Trevor Briggs, Remy Le Boeuf, Elena Krone, Eileen Farrell, Regan O'Rourke, Elena Roel, Greg Mortimer, Ali Ayoub, Stefani Langehennig, Caitlin Turk, Logan Scmid, Stefan Chavez-Norgaard, Karen Kim, Tatiana Peccedi, Courtney Cassidy, John Sebesta, Rhianna Lewis, Janice Bening-Lacek, Vivian Lawless, Mckenna Hanson, Jeffrey Amidon, Riya Joshi, Ram Ambre, Brady Worrell, Perrin Schneider, Ali Azadani, Brooke Agulnek, Lyndsie Salvagio, Elise Siemanowki, Yan Qin, Andre Allen, Melodie Nguyen, Megan Livengood, Abby Reams, Saffron Hartreeve, Bri Wylie, Sarah Brookman, Mariah Loiacono, Green Russo, Abhia Lodhi, Gabrielle Welsh, Nika Spehar, Shahked Levin, Evrim Baykal, Kimberly Chiew, Jocelyn Torres, Kailey Hicks, Mykaela Tanino-Springsteen, Audrey Bellows, Akam Chahal, Madeline Tepper, Shannon Murphy, Alexa Fonseca, Deborah Han, Cassandra Perez, Oluwatoyin Alaba, Julia Roncoroni, Vy Nguyen, Nana Burn, Sarah Sasse, Rubin Tuder, Anthony Gerber, Nancy Lorenzon, Christine Vohwinkel, Camryn Gunter, Tristan Weber, Sam Rommel, Brian Michel, Muskan Fatima, Alannah Oleson, Kira Frey, Edward Garrido, Beckett Morris, Kerstin Haring, Drew Middleton, Abigail Walpert, Liam Dee, Gabby Ishaw, Cole Carnes, Maddie Weiser, Claire Fox, Valeriia Vlasenko, Kateri Mcrae, Riley Smith, Abigail Templin, Kushani Rajapaksha

DU Undergraduate Research Journal Archive

Abstracts from the DU Undergraduate Research Showcase.

Sorption And Thermal Conductivity Of Concrete Containing Aggregates Of E-Waste, Rakesh Kumar Saini, Praveen Kumar

Journal of Sustainable Construction Materials and Technologies

In many parts of the world, substantial energy is used to maintain comfortable temperatures in inner parts of the buildings for living and working. Construction materials with low thermal conductivity, if used in the exterior walls and façade etc. in such structures can be useful in lowering the energy demand. On the other hand, moisture ingress through sorption is a common factor contributing in degradation of concrete structures with time. Constituents of concrete may be engineered to some extent to get both the desired attributes, lower thermal conductivity and sorption than normal concrete. The rapid increase in electronic waste, or …

Response Surface Modelling And Multi-Objective Optimisation Of Asphalt Binder And Mixture Properties Modified With Reclaimed Automotive Lubricants And Waste Glass Bottle Powder, Nura Shehu Aliyu Yaro, Jacob Adedayo Adedeji, Luvuno Nkosinathi Jele, Nasir Khan, Aliyu Usman, Jacob Olumuyiwa Ikotun

Journal of Sustainable Construction Materials and Technologies

Large volumes of reclaimed automotive lubricant (RAL) and waste glass bottle powder (WGBP) are disposed of inappropriately, causing serious environmental concerns. Furthermore, the paradigm shift towards sustainability in the pavement industry has prompted academics to investigate alternatives to conventional materials. As a result, one possible approach is to use these waste products as alternative materials in the asphalt pavement sector. This study investigated the combined use of RAL and WGBP as complementary modifiers, extending beyond the conventional single-modifier approaches reported in previous studies. Thus, in this study, response surface methodology (RSM) was utilised to optimise and predict the synergistic effects …

Engineering Design And Analysis Using Creo® Cad, Cae, And Manufacturing Applications, Swapnil Moon

Open and Affordable Textbooks

This textbook presents a structured approach to computer-aided design using Creo, integrating CAD, CAE, and CAM workflows within a unified engineering framework. The material emphasizes parametric modeling, design intent, and feature-based modeling as foundations for creating robust and adaptable engineering models. Through progressively structured tutorials, students develop skills in part modeling, assemblies, engineering drawings, mechanism design, simulation, and manufacturing. The text incorporates real-world engineering components and workflows, including structural and thermal analysis, motion simulation, and toolpath generation, reflecting modern engineering practice. Designed for upper-division undergraduate and graduate students, this open educational resource supports hands-on learning and prepares students for industry-relevant …

Design Of Air-Entrained Concrete For Airport Pavements Through Local Aggregate Utilization: Performance Optimization And Economic Analysis, Li Wentao, Rizwan Qadir, Arslan Mushtaq, Hilal Khan, Kamran Jillani

Journal of Sustainable Construction Materials and Technologies

Airport pavement construction in developing countries faces critical challenges balancing international performance standards with economic constraints, while limited research exists on optimizing air-entrained concrete mixes using locally sourced materials for cost-effective solutions. This study investigated the development of economical air-entrained concrete mix designs for airport pavements utilizing Pakistani aggregates and systematic cement content optimization. Comprehensive experimental evaluation included material characterization through petrographic analysis, alkali-aggregate reactivity assessment via accelerated mortar bar testing, and mechanical property development across cement contents from 360-450 kg/m3. Air entrainment was achieved through controlled admixture dosing while maintaining target slump of 50mm. Results demonstrated that locally sourced …

An Experimental Study Of The Morphology Of Dna-Carbon Nanotube Hybrid Structures In Direct Dna Sequencing, Avery P. Davis

Biomedical Engineering Undergraduate Honors Theses

Hybrid structures formed between single-stranded DNA (ssDNA) and single-walled carbon nanotubes (SWCNT) have emerged as promising components in future direct DNA sequencing technologies due to their unique morphological and electronic properties. The nanoscale configuration of these hybrids, including the DNA wrapping angle, pitch, and contour behavior, directly influences their potential for stable electronic readout. This thesis presents an experimental study of DNA-SWCNT hybrid morphology using a fixed, reproducible wrapping protocol designed to minimize environmental variability and isolate the influence of DNA nucleotide sequence on hybrid structure. As described in prior work, this protocol produces well-dispersed hybrids suitable for high-resolution imaging. …

Effects Of A Passive Assistive Hamstring Device On Overground Running Kinematics And Hamstring Activation., Quinn Castner

All Theses

Hamstring strain injuries are among the most common and recurring injuries in sports, occurring most often during the terminal swing phase of gait. Despite progress in rehabilitation, the incidence of injury has only increased, suggesting a need for a novel intervention. We designed a passive, assistive, wearable device with two specific criteria in mind: to offload the hamstrings during running, and do so without hindering normal kinematic patterns. The device consists of an adjustable elastic band anchored proximally at the waist and distally just above the ankle joint center. It stretches and shortens with the hamstrings, providing passive hip extension …

Exercise-Induced Muscle Damage As A Model For Exploring The Effects Of Pain On Gait, Sydney Savage

All Theses

Persistent gait asymmetry following anterior cruciate ligament reconstruction (ACLR) is a recognized contributor to post-traumatic knee osteoarthritis, yet the independent role of pain in driving altered movement patterns remains poorly understood due to confounding factors inherent to clinical populations. This study used exercise-induced muscle damage (EIMD) as a controlled experimental model to isolate the effects of musculoskeletal pain on gait, independent of kinesiophobia, structural damage, and proprioceptive disruption. Eighteen healthy adults underwent unilateral eccentric calf-raise protocols to induce delayed onset muscle soreness (DOMS), with gait assessed at baseline, 48 hours, and 168 hours post-exercise using bilateral inertial measurement units. Outcomes …

Multiscale Architecture Governs Stability In Suction-Actuated Variable Stiffness Catheters, Sheridan Lee

McKelvey School of Engineering Graduate Student Theses & Dissertations

Endovascular procedures require devices with widely varying mechanical properties: flexibility for navigating tortuous vessels and rigidity for stable therapeutic delivery. Suction-actuated variable stiffness sheaths address this challenge by incorporating axial wire string arrays that mechanically couple under suction to increase flexural rigidity. However, prototype devices achieve stiffening ratios below theoretical predictions, suggesting that interlayer mechanics and string positioning play a critical role. This study investigates whether interweaving polytetrafluoroethylene (PTFE) tape within the string array enhances flexural rigidity modulation and curvature stability. Prototype devices with varying wrap configurations were fabricated and evaluated using flexural testing, curvature stability testing, and mathematical modeling. …

Development Of Low-Cost Triaxial Force Sensor For Measurement Of Human-Exoskeleton Interaction Forces, Hamdan Khan Sarvathullah

All Theses

Contemporary research suggests that shear force is a major contributor to discomfort and pressure injury. However, the variation of shear forces during human-exoskeleton interaction dynamics is a highly unexplored field. The high cost of commercial triaxial force sensors may be a major factor in the notable lack of research in this field. Therefore, in this paper, we present a low-cost, 3D-printed triaxial force sensor designed specifically to measure the triaxial interaction forces between an exoskeleton and its user. The triaxial force sensor uses Carbon-Black/Silicone Rubber (CB/SR) strings to measure shear forces, whereas the normal force is measured with a Force …

Implantable, Sensor-Embedded Vascular Graft Towards Wireless Monitoring Of Stenosis, Nnamdi Dike

LSU Master's Theses

Arteriovenous (AV) grafts are commonly used to provide vascular access for hemodialysis in patients with end-stage renal disease. Despite their widespread use, AV grafts are prone to complications such as stenosis and thrombosis. Early detection of these conditions remains challenging with current monitoring methods too costly or insufficient. This work presents the design, fabrication, and validation of an LC pressure sensor embedded within a model AV graft to enable real-time monitoring. The proposed system integrates a parallel-plate capacitive pressure sensor with a spiral inductor to form an LC circuit embedded within an elastomeric graft wall. The Ecoflex 00-30 dielectric layer …

Mathematical Modelling And Optimisation Of The Reactor For The Esterification Process Of Safflower Oil With N-Butyl Alcohol, Sadritdin Makhamatdinovich Turabdjanov Academician, Hasan Sadriddin Ugli Fozilov, Ozoda Bakhronovna Axmedova, Sadriddin Fayzullayevich Fozilov

Technical science and innovation

This study addresses the mathematical modelling and optimisation of a reactor for the esterification of safflower oil with n-butyl alcohol. To improve process controllability and reduce the need for numerous pilot-scale trials, an ideal-mixing continuous stirred-tank reactor (CSTR) model was adopted. Incorporating reaction kinetics, the effect of contact time on the relative viscosity of the product mixture was analysed. The modelling results indicate that achieving an acceptable degree of feedstock conversion is difficult when a single ideal-mixing reactor is used. Therefore, a CSTR cascade was proposed, and the configuration with N = 2 reactors was selected as the most appropriate …

Theoretical And Practical Foundations Of Healthcare System Digitalization, Sanjarbek Bekturdiev Sharifboyevich Phd, Muxlisa G‘Ulom Qizi G‘Ofurova

Technical science and innovation

The digital transformation of healthcare represents a key direction in improving the accessibility, quality, and efficiency of medical services. This study examines the main components of eHealth, including telemedicine, electronic health records, cloud technologies, and mobile applications, as well as the role of international organizations in promoting national digital health strategies. Particular attention is given to the current state of digital healthcare in the Republic of Uzbekistan, where significant progress has been made in developing infrastructure and implementing information systems, although challenges related to integration, standardization, and regulatory support remain. The work identifies the main trends in the development of …

Development Of New Methods For Calculating Pressure And Energy Losses For Pumping Station Water Intakes, Faxriddin Jaylovovich Nosirov, Oleg Yakovlevich Glovatsky, Jurabek Abdyrahmon O'G'Li Urolov, Abduqodirkhon Samatkhonovich Abdullakhaev, Anvar Mamur Ugli Uzokov

Technical science and innovation

The aim of this study is to improve the efficiency of water resource management methods. Improvements to the water intake of the Karshi Main Canal are considered using calculations of pressure losses at the entry and exit of liquid into the flow, which differ from pressure losses in a stationary medium. The article considers some of the methods for using renewable energy sources, where the change in gravitational potential energy does not depend on the way of using energy and the operating scheme is a gravitational energy pump. The implementation of control and monitoring systems is necessary to ensure optimal …

Refinement Of Wind Speed Estimation At Turbine Hub Height Using Satellite Data And Regression Analysis Under Complex Terrain Conditions, Isroil Abriyevich Yuldoshev, Tulqin Rustamovich Jamolov, Sa'dullo Sayfiddin Ugli Fazliddinov, Jumanazar Farhodjon OʻGʻL Abdurashidov

Technical science and innovation

Reliable assessment of wind energy potential in regions characterized by complex terrain is often constrained by the limited availability of ground-based meteorological measurements. This study proposes an improved regression-based approach for refining wind speed estimates at the wind turbine hub height of 65 m using satellite-derived data from the NASA POWER database combined with a logarithmic vertical wind profile. The proposed methodology is validated using real operational data from a 750 kW wind power plant located in the mountainous Bostanlyk district of Uzbekistan for the period 2018–2021. The regression analysis demonstrates a strong linear relationship between the extrapolated wind speed …

A Platform For Acquiring And Classifying Low-Noise Electrocardiogram Signals For Applications In Cardiovascular Monitoring, Begmamat Berdimurodovich Dushanov, Narzullo Mamatov Dr.

Technical science and innovation

The early screening and continuous monitoring of cardiovascular diseases need effective acquisition and smart processing of electrocardiogram (ECG) signals. In this article, we introduce a compact platform designed for the acquisition of low-noise ECG signals and classification of the signals using a one-dimensional convolutional neural network (1D-CNN). Our compact platform consists of a low-noise analog front-end (AFE), including an instrumentation amplifier and a chain of analog filters, along with a data acquisition component designed to ensure effective suppression of baseline wander and high frequencies. Our compact platform consumes a low amount of power and can therefore be used for continuous …

Numerical Study Of Nutrient Mixing In Trabecular Bone In Microgravity, Disuse And Normogravity, Sagar Gharti

Doctoral Dissertations and Master's Theses

Mechanical loading is known to regulate bone remodeling by driving interstitial fluid flow which stimulates cells and drives nutrient transport within the trabecular network. In microgravity, the absence of mechanical stimulation or loading suppresses convective flow processes, causing diffusion-driven nutrient mixing and renewal, and accelerated bone loss. This thesis investigates how oscillation frequency and trabecular bone density jointly control nutrient mixing and wall shear stress within trabecular cavities.

A computational fluid dynamics (CFD) framework is developed in STAR-CCM+ using a soft-cap oscillation model that mimics cyclic compression. Three idealized trabecular morphologies are simulated across different frequencies to represent microgravity or …

Bio-Payload Senior Design Report, Connor Bishop, Oliver Goodall, Marcus Kirk, Gabby Robles, Anish Shanmuganathan

Interdisciplinary Design Senior Theses

This project focuses on the design and development of an autonomous experimental platform capable of conducting cellular biology experiments in a well plate within a CubeSat environment. The system integrates microfluidics, robotics, and onboard sensors to remotely initiate experiments, monitor them, and collect data without human intervention. The objective is to create a platform for automated biological experimentation in microgravity, while reducing reliance on ground-based control and increasing mission efficiency and reproducibility. The team used Saccharomyces cerevisiae to assess the biocompatibility of the well plate and monitor changes in cell culture, including optical density and cell viability.

Mechanical, Thermal And Fire Behaviour Of Hemp-Based Composites With Different Binders For Sustainable Building Applications, Anilcan Aygun, Fahri Birinci, Selim Aytac, Ali Kemal Ayan, Hasan Alp Sahin, Ibrahim Isildak

Journal of Sustainable Construction Materials and Technologies

This study investigates the physical, mechanical and thermal properties of hemp-based composites produced with traditional binders such as lime, cement, gypsum, clay, and water-based glue. Hemp fractions of different sizes (splinter, shiv, fiber and powder) were combined with these binders to manufacture cube and plate specimens, which were tested for physical, mechanical, thermal, and temperature resistance properties. The study aims to compare the mechanical, physical, thermal, and fire behaviour of these composites to assess their suitability for sustainable construction applications. The hemp-based composites were tested for unit weight, water absorption, compressive strength and thermal conductivity. Most specimens are lightweight (<1000 kg/m3), and exhibit good thermal insulation performance and high compressive deformability, making them suitable for seismic-prone regions. The glue-based composite had the lowest unit weight, measured as 330 kg/m3. Thermal conductivity ranged from 0.051 to 0.243 W/m· K, with several mixtures performing better than natural pumice. While cement-based composites showed the highest compressive strength, ranging from 5.5 to 24.8 kg/cm2, natural hydraulic lime is the lowest. Water absorption was high, and moisture release occurred slowly across all hemp fractions. Combustion tests indicated that hemp-based materials have moderate temperature resistance, with charring temperatures ranging from 238–265°C for raw hemp and 300–385°C when mixed with binders. Overall, hemp-based composites are lightweight, eco-friendly, and suitable for non-load-bearing construction and insulation applications. However, improvements in moisture resistance and long-term durability are necessary to enhance their practical applicability.

Sustainable Cow Dung Bricks: An Innovative Approach To Eco-Friendly Masonry With Enhanced Thermal And Mechanical Performance, Nagesh Sugandhi, Sachin Patil, Satish Reddy, Ashwini G, Santosh Kumar

Journal of Sustainable Construction Materials and Technologies

This study explores the development, characterization, and performance of sustainable cow dung bricks using locally sourced organic (cow dung) and mineral (clay, quartz sand, feldspar, lime) constituents for non-load-bearing masonry in India. Three blends with varying cow dung content (70%, 75%, 80%) were mixed, molded, air dried, and cured without kiln firing to reduce environmental impact. The bricks' mechanical properties—compressive strength, water absorption, bulk density, flexural strength, shore hardness, and modulus of elasticity—were systematically evaluated with complete statistical documentation (n = 6 replicates per formulation per test age). Microstructural features were investigated using Fourier Transform Infrared Spectroscopy (FTIR) and X-Ray …