Biomedical Engineering and Bioengineering Commons^™

Generative Ai For Method Development In Analytical Chemistry: A New Paradigm In Experimental Design And Optimization, Yasir Fathi Mahmood

Al-Esraa University College Journal for Engineering Sciences

The fast development of artificial intelligence (AI), especially generative AI models, is changing the environment of analytical chemistry. As classical method generation in analytical methods relies on manual trial-and-error methodology as well as statistical methods, generative AI is a new paradigm with automated generation of experimental methodology and optimization. In this paper, the authors discuss the use of generative AI-based technologies, including large language models (LLMs) and neural network-based generators, to create new, efficient, and customized methods of analysis. The paper examines existing applications, technology frameworks, and issues and offers a roadmap with regards to the future incorporation of generative …

Numerical Modeling And Experimental Validation Of A High-Temperature Latent Heat Thermal Energy Storage System Using Metallic Phase Change Materials For Concentrated Solar Power Applications, Fouad Hashim Sharhan

Al-Esraa University College Journal for Engineering Sciences

To ensure reliable performance for the power-block of CSP plants, high power density and near-isothermal discharge must be achieved. A robust means of achieving this is through thermal energy storage (TES). High temperature latent heat storage (LHS) with phase change materials (PCMs) can serve these purposes, however the conventional salts used in PCMs typically suffer from low thermal conductivity that limits power density and increases energy storage charging/discharging times. This manuscript investigates ways to address these limitations using high temperature metallic phase change materials (MPCMs) while also developing a validated numerical framework to aid in their design. To this end, …

Thermal Performance Evaluation Of Solar Cooling Systems For Educational Facilities In Baghdad, Yasser Alawi Mohammed Attia Al-Jubouri

Al-Esraa University College Journal for Engineering Sciences

Schools in Baghdad also suffer from poor thermal comfort, which is a common problem in high-temperature and low-humidity arid climates such as that of the city, where using cooling devices leads to a large energy demand and overloads on the national power grid. Such study offers a thorough assessment of the thermal performance of solar-based cooling systems in an efficient manner to be suitable for educational buildings in Baghdad. The analysis is centred on a solar thermal cooling system with absorption as the heat interaction medium, and an experimental characterisation and mathematical simulation itself are performed. A pilot installation, consisting …

Curing Duration Optimization To Reduce Shrinkage Cracking In One-Part Alkali-Activated Slag Concrete, A. Sadrmomtazi, H. Zanganeh

Journal of Sustainable Construction Materials and Technologies

The consequences of inadequate curing on one-part alkali-activated slag concrete (O-AAS) performance relative to ordinary Portland cement concrete (OPCC) have been investigated in this research. Prior to exposure to unsaturated conditions, samples underwent initial moist curing for durations ranging from 24 hours to one year. The testing program included compressive strength evaluation, chloride ion transport analysis, and measurement of free and restrained shrinkage. In addition, cylindrical cores were extracted from concrete columns to assess internal strength and chloride penetration resistance. Under unsaturated exposure, O-AAS exhibited a strength-aging phenomenon, with up to a 37% decrease in compressive strength over 360 days, …

Laboratory Investigation And Numerical Modelling Effect Of Carbon Nanotubes On Hot Mix Asphalt Permanent Displacement, Sepehr Saedi, Auwal Usman Nadada

Journal of Sustainable Construction Materials and Technologies

One of the primary causes of asphalt pavement deterioration is rutting; in contrast, one of the most effective methods to address this type of damage is the use of additives and quality evaluation during the design stages. In this research, laboratory testing and modeling using Abaqus software were employed to validate the laboratory results and predict and assess the potential for rutting. Carbon nanotubes (CNTs) were selected as an additive due to their exceptional mechanical properties and molecular interactions with bitumen. These nanotubes were used to modify the bitumen for the preparation of laboratory samples. The laboratory results from the …

Influence Of Early Microwave Curing On Performance Of Slag-Based Geopolymer Mortars, Ahmet Taşdemı̇R, Abdulkadir Çevı̇K

Journal of Sustainable Construction Materials and Technologies

In this article, an experimental study was conducted to examine the effect of curing time and microwave power on the compressive strength of early microwave-cured slag based geopolymers. Geopolymers have the potential to serve as an environmentally friendly substitute for cement-based building materials, and the use of microwave curing to geopolymers holds the promise of substantial strength improvement. Different microwave curing energies (300 - 800 Watts) were utilized at varying durations (10 - 60 minutes) on demoulded mortar specimens after one day. After that, compressive strength tests were conducted on both the cured and uncured specimens at three different ages: …

Comprehensive Mechatronic Design Methodology For 6-Dof Stationary Lower Limb Rehabilitation Exoskeleton Robot With Safety-Integrated Control Architecture, Javlonbek Rakhmatillaev Mr., Nodirbek Kimsanboyev Mr., Umidjon Takabaev Mr., Zafar Juraev Dr.

Chemical Technology, Control and Management

This paper presents the mechatronic design of a proposed six-degree-of-freedom (6-DOF) stationary lower limb rehabilitation exoskeleton (SLLRE) robot, developed through a comprehensive mechatronic design methodology that includes mechanical design, actuator and sensor selection, and the development of a control structure based on a safety-oriented control approach. The proposed 6-DOF SLLRE mechanical design introduces a comprehensive mechanical structure comprising bilateral hip, knee, and ankle joints, degrees of freedom, joint ranges of motion, human parameters for rehabilitation training, as well as the frames and structural elements of the proposed system. Furthermore, the selection of appropriate sensors, actuators, and control architecture for the …

Development And Evaluation Of A Smart Vacuum-Assisted Suspension System For Transtibial Prostheses, Zahraa Kathem Ali, Wajdi Sadik Aboud

Al-Bahir

A prosthetic socket is essential for achieving comfort, gait symmetry, and overall satisfaction for amputees. Effective suspension systems are crucial for securely attaching prostheses, thereby optimizing comfort, functional performance, and long-term limb health. This study aimed to develop and evaluate an intelligent vacuum-assisted suspension system for transtibial prostheses to improve socket fit, gait stability, and reduce residual limb movement. The system integrates force-sensitive resistors (FSRs) and an inertial measurement unit (MPU6050) with accelerometer and gyroscope sensors, continuously monitoring interface pressure and limb motion. Real-time data from these sensors dynamically adjusts vacuum pressure based on the user's gait pattern .Quantitative gait …

Use Of Alaçatı Stone Aggregate In Conventional And Self-Consolidating Concretes, Tahir Kemal Erdem

Journal of Sustainable Construction Materials and Technologies

Alaçatı stone or Alapietra stone is widely used mostly for building cladding. However, its production and use in the construction sites generate high amounts of waste (debris), causing environmental pollution in Çeşme which is a touristic district. This study investigated the reuse of Alaçatı stone as lightweight aggregate (LWA) in both conventional and self-consolidating concrete (SCC) mixtures. The concretes were prepared to have three different water-to-cement ratios (w/c), which were 0.38, 0.42 and 0.48. For each w/c, a conventional concrete mixture and two SCC mixtures with 60 or 70 cm slump flow were produced by varying the superplasticizer SP content. …

A Decision Support Model For Building Material And Component Reuse In The Context Of Circular Buildings, Havva Aksel

Journal of Sustainable Construction Materials and Technologies

Construction activities cause significant environmental impacts such as waste generation, pollution, resource consumption, and land use, which are expected to increase with global construction demands. To mitigate these environmental problems, the circular building occurs as an emerging concept depending on in the circular economy, which aims to minimize waste and redefine the “end-of-life” concept by reducing, reusing, recycling, and recovering materials. The reuse of building materials and components (BMCs) from existing structures represents a crucial strategy for achieving circularity in the built environment. Within this framework, design plays a key role. However, designing with reclaimed BMCs remains complex due to …

Expansion Limits Of Meshed Split-Thickness Skin Grafts, Haomin Yu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Split-thickness skin grafts are widely used to treat chronic wounds. Procedure design requires surgeons to predict how much a patch of the patient's own skin expands when it is meshed with rows of slits and stretched over a larger wound area. Accurate prediction of graft expansion remains a challenge, with current models overestimating the actual expansion, leading to suboptimal outcomes. Inspired by the principles of mechanical metamaterials, we developed a model that distinguishes between the kinematic rearrangement of structural elements and their stretching, providing a more accurate prediction of skin graft expansion. Our model was validated against extensive data …

Design And Development Of Biomimetic Hydrogel Interfaces For Enhanced Bioelectrical Signal Acquisition, Daniela Nikoloska

UNLV Theses, Dissertations, Professional Papers, and Capstones

Every second, human skin processes over one million sensory signals while maintaining properties such as electrical conductivity, mechanical adaptability, and regenerative capability that surpass all synthetic materials. Contemporary bioelectronic devices prove inadequate when contacting skin surfaces due to poor adhesion and electrical contact issues that prevent effective sensing. Despite advancements in wearable and bioelectronic technologies, current devices face major drawbacks when interfacing with human skin, particularly in maintaining firm adhesion, conformability, and low-noise electrical signal acquisition.

This research focuses on the development of a biomimetic hydrogel-based interface for bioelectronic sensing. Specifically, a hybrid hydrogel system composed of polydopamine (PDA)- doped …

Durability Of Alkali-Activated Concretes Under 5% Sulfuric Acid Environment, Celal Karabaş, Anıl Niş

Journal of Sustainable Construction Materials and Technologies

The investigation focused on the resistance to 5% sulfuric acid degradation of the alkali-activated concretes (AAC). The AAC was manufactured using a blended binder of 50% slag and 50% F-type fly ash. The AAC was activated using a blend of 14 M sodium hydroxide and sodium silicate, with a hydroxide-to-silicate ratio of 1/2,5. Six AAC were produced against a 5% sulfuric acid environment, varying the binder amounts (400–500–600 kg/m3) and activator-binder (A/B) ratios (0,45–0,55). The chemical resistance of AAC was evaluated by visual appearance, variation in weight and compressive strengths. The findings pointed out that more gypsum and higher weight …

Comprehensive Risk Assessment For Construction Site Managers In Kosovo: A Mixed-Method Approach, Muhamet Ahmeti, Besian Sinani

Journal of Sustainable Construction Materials and Technologies

This study developed and validated a hybrid ISO 31000:2018 Kosovo-compliant risk assessment framework tailored for construction site managers operating within transitional economies. The research employed audits of 20 ISO-certified contractors in Pristina, Kosovo, along with field observations, interviews, and quantitative risk matrices. The findings indicate a critical concentration of risk, with 70% of firms classified as "High" or “Very High” risk. The most prevalent hazards identified were working at height without collective protection, unprotected electrical systems, and manual handling of heavy materials. Regression analysis revealed that firms with a designated safety champion achieved significantly lower risk scores, whereas those with …

Behaviour Of Internally Strengthening Hollow Stainless-Steel Hot-Rolled Circular Columns Filled With Crumb Rubber And Recycled Aggregate Concrete, Wadhah M. Tawfeeq, Mohammed M. Rasheed, Mithaq Kohees, Ahmed W. Al Zandd, Saif Al-Balushi, Hamed Al Abdul Salam

Journal of Sustainable Construction Materials and Technologies

Stainless-steel sections are increasingly being utilised in favour of their higher durability. Simultaneously, the use of recycled materials in concrete is aligned with the global concern to encourage sustainable and environmentally friendly construction. The paper examined the behaviour of stainless-steel columns filled with concrete with crumb rubber (CR) and recycled aggregate (RA). It analysed the effect of different percentages of CR (0, 15, and 30) and RA (0, 15, and 50) on the compressive strength of the concrete and the performance of the columns using stainless-steel hollow sections. 20 specimens were manufactured, 18 of which were cast with concrete containing …

Piezoelectric Concrete: A Smart Material Approach For Energy-Harvesting Structural Technologies, Dianah Mazlan, Vynotdni Rathinasamy, Naveen Kumar, Liu Chunpeng, Elango Elango

Journal of Sustainable Construction Materials and Technologies

The rapid growth of urban infrastructure demands innovative materials that not only support structural performance but also contribute to sustainability through energy harvesting. Piezoelectric concrete, which integrates ceramics, polymers, nanomaterials, and bio-based fillers into cementitious matrices, has emerged as a promising solution. This review systematically explores the fundamentals of piezoelectricity in concrete, highlighting how stress-induced electromechanical coupling enables both energy harvesting and structural health monitoring. The paper critically evaluates major material systems including PZT ceramics, PVDF polymers, hybrid nanocomposites, and emerging bio-based materials, alongside their integration strategies such as embedded and surface-mounted approaches. Applications across pavements, bridges, and smart buildings …

Recreating Fiber Recruitment With Fiber Recruitment Using Additive Manufacturing, Natalia D. Mciver

Biomedical Engineering ETDs

Injured ligaments are often repaired with tendon grafts which may over or under constrain the joint; there is a need for an artificial graft option with the mechanical properties of a native ligament. Crimped fibers within ligaments allow for recruitment which means the viscoelastic properties of stress relaxation and creep are not inversely related. A feasibility study using ACLs and large-scale crimp models to study viscoelasticity, led to an in-depth analysis of the scapholunate interosseous ligament. Using the Modified Kelvin spring-dashpot model, for describing viscoelasticity with a variable stiffness property (time dependent fiber recruitment), we defined the relationship between creep …

Harnessing The Mechanical And Gelation Behavior Of Tyramine-Substituted Silk Fibroin Bioinks Through Integration Into A Modular And Low-Cost 3d Bioprinting Platform, Sourjjadeepta Biswas

Boise State University Theses and Dissertations

3D printing has become an indispensable tool in research labs across the globe. Yet, when it comes to bioprinting with custom or sensitive bioinks, accessible options remain limited. Commercial systems are often prohibitively expensive and restricted to proprietary materials, while DIY setups frequently lack the precision and compatibility needed for biologically relevant printing. Moreover, tunable bioinks that align with real-world biological constraints are still hard to come by. To address these gaps, we developed a modular, low-cost bioprinting platform tailored for tyramine-substituted silk fibroin (TA-SF) hydrogels-biocompatible materials known for their rapid gelation, tunable stiffness, and potential to support cell differentiation …

Optimal Control Of Human Exercise Using An Individualized Physiological Three-Tank Model And Dynamic Programming, Asal Lotfi

All Theses

This thesis develops a physiologically inspired three-tank model of human bioenergetics to describe and optimize fatigue and recovery during exercise. The aerobic, phosphagen, and glycogen systems are modeled as coupled reservoirs whose states constrain instantaneous power output. Building on this representation, dynamic programming is used to compute pacing strategies that respect physiological limits while maximizing task-specific goals such as peak power or total work over a fixed duration, enabling individualized, goal-driven exercise prescriptions. The three-tank dynamics are formulated in continuous time and then discretized under a zero-order-hold assumption for simulation and optimal control. Model parameters are linked to standard field …

Reproducibility In Modeling Of Knee Joint Mechanics, Maryam Nazem

Electronic Theses and Dissertations

Computational modeling of knee joint biomechanics can provide valuable insights into joint function, injury mechanisms, and patient outcomes, and can support surgical planning and informed clinical decision-making. However, achieving consistent and repeatable results, or reproducibility, is a significant challenge that affects the credibility of these models. This thesis addresses reproducibility through two studies related to the KneeHub Project, which is a multi-institutional collaboration designed to investigate reproducibility in finite-element modeling of the knee.

The first study involved model benchmarking, where predicted results of the calibrated models were compared with the experimental data to evaluate model reproducibility. While all models replicated …

Scientific Characterization Of Historic Mortars Dating From The 15th-Century Of A Historical Building In Algeria: A Case Study, M. E. Belgacem, N. Rabahi-Touloum, R. Neves, Y. Ouldkhaoua

Journal of Sustainable Construction Materials and Technologies

This research investigates the historic mortars (Aggregate/Binder (A/B) ratio) of a historical patrimony building, dating from the 15th century, in Algeria, for restoration purposes. It is well known that thorough characterization is essential for successful restoration. To this end, several techniques, including Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), and X-ray Fluorescence (XRF), optical microscope were used to characterize the historic mortars. A mechanical test was used to characterize the compressive strength of a historic mortar. For a comprehensive characterization, A/B ratios were estimated using both Digital Image Analyses (DIA) and chemical analyses. The results obtained provided clear information on …

Enhancing 6g Network Security With Quantum Key Distribution: A Comprehensive Review, Bassma M. Kamil

Al-Esraa University College Journal for Engineering Sciences

With the considerable progress of sixth-generation (6G) networks further on the horizon, security has attracted much attention in the face of increasingly sophisticated threats, especially from quantum computing. Classical cryptographic schemes based on computational hardness are becoming more and more brittle, as they can easily be attacked with a quantum computer. Quantum Key Distribution (QKD) arises as a promising tool for information-theoretic security through quantum mechanics to obtain an unbreakable key by exchanging unknown bit sequences. In this paper, we provide an extensive survey on the integration of QKD both in the envisioned 6G architecture, including current implementations, technical feasibility, …

Protection The Nfv Net-Work Using The Random Forest Classification, Mustafa H. Taha, Ibtesam Jomaa Hawi, Wafaa Waheeb Abdullah Ali

Al-Esraa University College Journal for Engineering Sciences

A misuse attack is the most common and dangerous type of attack that could target NFV (Network Function Virtualization). In a misuse attack, the attacker attempts to consume the NVF environment’s resources by sending a large amount of traffic. To protect the NFV environment, an early and accurate misuse attack detection system has been proposed based on NFV and Random Forest Classifier. The proposed model starts with importing the dataset and analyzing it then pre-processing and feature selection using a PSO (particle swarm optimization) Test algorithm, classification is based on the most common and efficient machine learning technique, which is …

Design Of A Hybrid System For Powering Wireless Communication Units, Samer Rabih, Ahed Alboody

Al-Esraa University College Journal for Engineering Sciences

Wireless and optical communication units are becoming more widespread nowadays, especially in rural areas. Therefore, feeding electricity has become essential for the continuity of services. As a result of economic and social development, there has been an urgent need to supply electrical power for the basic requirements of wired and wireless telecommunications equipment. This is linked to public safety, long life, and connection to uninterruptible power systems to ensure continuous power supply, whether from renewable energy sources or traditional diesel systems. This research studies and designs a renewable energy (solar) power system to power telecommunications equipment. The proposed power system …

Dynamic Ris-Enabled Massive Mimo Noma Systems Power Allocation Optimization For 6g Using Machin Learning Approach, Mohamed Hassan, Khalid Hamid, Salah Hagahmoodi, Elmuntaser Hassan

Al-Esraa University College Journal for Engineering Sciences

This study examines spectral efficiency (SE) and throughput throughout a spectrum of user densities (from 50 to 1000 users), user mobility speeds (0 to 350 km/h), latency, packet loss, and fairness index, within a wide range of signal-to-noise ratios (SNRs). The analysis includes a number of different situations, such as (i) cooperative non-orthogonal multiple access (NOMA) with massive multiple-input multiple-output (mMIMO), (ii) mMIMO cooperative NOMA integrated with cognitive radio (CR), and (iii) CR-assisted mMIMO cooperative NOMA enhanced with reconfigurable intelligent surfaces (RIS). All of these are part of 6G millimeter-wave (mmWave) networks. The study investigates the enhancement of latency, packet …

Harnessing Waste Heat From Solar Cells Using Advanced Energy Storage Systems, Hayder Ibrahim Ismael

Al-Esraa University College Journal for Engineering Sciences

Renewable energy is largely produced by photovoltaic (PV) solar cells, but such a process is greatly impacted with thermal buildup as the solar cells work. Redundant heat not only lowers the level of electrical production, but also hastens deterioration and decreases the life-time of PV modules. In this study, we suggest a hybrid system which combines high-performance energy storage devices, namely, super-capacitors, and PV modules coupled with the use of waste heat as a source of useful energy and which increases efficiency of the system in conjunction. In order to estimate the potential amount of thermal energy recovery, as well …

Empirical Research Of A Greenhouse Monitoring And Controlling System Using Zigbee Protocol, Mohammed Hijazeh, Salah Hagahmoodi

Al-Esraa University College Journal for Engineering Sciences

Greenhouses are of great importance in the agricultural field as they provide the appropriate and important environment for the growth and production of various plants regardless of the surrounding environmental conditions. Monitoring and controlling these houses are considered necessary and important in order to provide the required environment and obtain the best production. Therefore, the aim of this project is to study the monitoring and control of these houses using wireless sensor networks, which are considered modern and simple methods due to the accuracy of work and little effort they provide, and thus better production. The study will be for …

Designing An Efficient Deduplication Algorithm For Audio Files In Cloud Storage, Ammar Zakzouk, Alaa Al Sebae, Hasan Hasan

Al-Esraa University College Journal for Engineering Sciences

Data duplication is a significant challenge in large-scale data storage systems, as it consumes storage space and impacts data organization, management, and processing. An optimal storage system effectively utilizes available storage space. To solve this problem, hash algorithms are employed to generate hash keys for files. Matching files have the same hash key. However, the hash key for two different files in the data may match, and this is what we refer to as a collision. The collision issue is related to the length of the hash key. As the length of the hash key increases, the probability of a …

The Future Of Al-Driven Cybersecurity For Advanced Iot, Estqlal Hammad Dhahi, Sanaa Hammad Dhahi, Ohood Fadil Alwan

Al-Esraa University College Journal for Engineering Sciences

Internet of Things technologies experience rapid advancement because of 5G networks and upcoming 6G technologies, which resulted in transformational changes to security dynamics. This study examines the functionality of artificial intelligence through platforms developed to secure Internet of Things systems. The demand for improved security capabilities has become essential because IoT devices generate new assault channels, and their market penetration speed is escalating. Machine learning algorithms, together with deep learning and natural language processing methods, are investigated in this paper for enhancing the security protocols of IoT systems through studies found in academic literature. The paper explores upcoming developments and …

Foundations Of Artificial Intelligence In Healthcare Diagnostics: A Systematic Survey, Raghad Tariq Al-Hassani

Al-Esraa University College Journal for Engineering Sciences

Artificial Intelligence (AI) is becoming the cornerstone of the future of healthcare diagnostics, that has to ability to change the healthcare diagnostic landscape in terms of diagnostic accuracy, speed, and availability. This systematic review investigates the basic methods, tools, applications, and challenges involved in the integration of AI in diagnostic medicine. It emphasizes the using of machine learning models, deep learning networks (e.g., CNNs), NLP for clinical documentation, and smart computing infrastructures, such as edge device and IoMT. They are making possible real-time, data-driven decision making that is already at human-expert-level performance or, in some cases, even better (in the …