Biomedical Engineering and Bioengineering Commons^™

Secure Gif Files Based On Zuc Stream Cipher And Present Algorithm, Suhad Fakhri Hussein

Al-Esraa University College Journal for Engineering Sciences

Some important security needs include authentication, confidentiality, integrity, non-repudiation, and user privacy. Many security systems include these required protections for information transmission. The encryption process is one of the most important security measures. Many secure encryption algorithms are based on different keys and key lengths to ensure a high degree of security. GIF file format is common file format that is used in several application, securing these files through transmission is imperative. In this paper, an efficient method for encryption GIF file is proposed based on using modified present algorithm, modified ZUC stream cipher, and an efficient method for key …

Advanced Strategies And Solutions Towards More Secure And Effective Two-Factor Authentication In Networking, Zahraa Sameer Jawad

Al-Esraa University College Journal for Engineering Sciences

With the rapid increase in cybersecurity threats targeting network systems, traditional two-factor authentication (2FA) methods are insufficient to address advanced attacks. Vulnerabilities such as phishing, SIM-swapping, and social engineering exploit the limitations of SMS-based and email-based 2FA. This paper examines advanced strategies and solutions for securing networked environments through robust 2FA mechanisms, focusing on approaches like elliptic curve cryptography (ECC), digital certificates, and biometric verification. This article offers a comparative review of various strategies about their effectiveness in enhancing security, while also highlighting their capacity to optimize user-friendliness and adaptability to emerging threats. Research findings promote an effective countermeasure strategy …

Advancements In Ultrasound Technology And Iot Security: A Physics-Based Approach To Enhanced Imaging With Lightweight Encryption Algorithms, Noor Fawzi Shafiq

Al-Esraa University College Journal for Engineering Sciences

The rapid advancements in ultrasound technology, coupled with the growing significance of IoT security, present a unique opportunity to enhance imaging systems while ensuring data integrity. This study explores the integration of physics-based principles in ultrasound imaging, focusing on how lightweight encryption algorithms can secure data transmitted from IoT devices.Ultrasound technology has evolved significantly, benefiting from improved imaging techniques and the incorporation of IoT devices. As these devices proliferate across various applications, including healthcare and industrial monitoring, the need for secure data transmission becomes paramount. This paper proposes a framework that combines advanced ultrasound imaging with robust lightweight encryption methods …

Artificial Intelligence Approaches To Mitigating Network Congestion In Iot Systems, Aysar Hadi Oleiwi

Al-Esraa University College Journal for Engineering Sciences

The unprecedented explosion of Internet of Things (IOT) devices has elevated the requirements of the network infrastructures to unprecedented levels, causing severe congestion problems, especially in applications which demand low latency, high throughput, and real-time feedback. Static routing protocols, AQM, and TCP variants are some of the traditional mechanisms for congestion control that are unable to perform efficiently in dynamic and diverse IoT environments as they are reactive-based and inflexible. To this end, in this paper, we explore the promising ability of Artificial Intelligence (AI) methods such as Machine Learning (ML), Deep Learning (DL), Reinforcement Learning (RL), and their combination …

Groundwater Quality Analyses For Irrigation Purposes In Salah Al-Din, Iraq: A Review, Noor A. Radhi, Dawood E. Sachit, Abdul-Sahib T. Al-Madhhachi

Al-Esraa University College Journal for Engineering Sciences

The focus of this study is the effect of the physical and chemical characteristics of groundwaters on plants and agricultural crops, following the last studies on this matter. The results underscore the necessity for groundwater treatment before its utilization in irrigation for sustainable agricultural farming. It is also possible to identify which crop type can be grown in well-watered land, according to the characteristics of irrigation water and the yield of each crop. The study also introduces some ideas about irrigation water quality parameters such as Electrical conductivity (EC), Total Dissolved Solids (TDS), pH, Chloride (Cl^–), Sodium (Na …

Examining Iot-Enhanced For Current Developments In Face Image Authentication (Fia) Methods And Their Drawbacks, Marwa Jamal Hadi, Emaan Ouudha Oraby

Al-Esraa University College Journal for Engineering Sciences

The quick development of IoT and facial image manipulation (FIM) algorithms, as well as the growth of their user-friendly applications, highlight the pressing need for manipulation detection methods. These techniques need to demonstrate how face photos have been altered and validate their legitimacy. The scientific community has recently taken notice of the phrase “DeepFakes” and methods for detecting them. Take note of the latest methods for identifying watermark-based face image modification as well. The important thing to remember is that every one of these methods has its own set of drawbacks. This study provides a brief introduction to face image …

Impulse, Fall 2025, Jill Fier, Sierra Brown, Jerome J. Lohr College Of Engineering

Impulse (Jerome J. Lohr College of Engineering Publication)

2 | Faculty News
3 | SDSU Vet Hua to Head Civil Engineering
6 | Ad Lunam — To the Moon
10 | Building A Safety Culture
11 | Department News
12 | Surface Mount Technology Kickoff
14 | Construction Management Student, Volleyball Player Building Success Piece by Piece
16 | Student Awards, Honors
18 | Student Competition Results
20 | NASA Win Opens Doors for New Product Development Order
22 | SDSU Engineering Student Tabbed as Noblereach Fellow
26 | Knabach Award Recipient from Apprentice Lineman to Company President
28 | Metzger Create Faculty Endowment for SDSU Engineering
30 …

A Biomimetic Fe Model Of The Human Foot For Kinematic And Footwear Analysis, Brady K. Nakamura

College of Engineering Summer Undergraduate Research Program

The idea of the present proposal is to develop a biomimetic foot model and validate the model accuracy in predicting plantar stresses on the foot, using insole pressure sensors. The incidences of foot pain can often be coupled with uncomfortable footwear and prolonged usage of a shoe may be associated with long-term musculoskeletal disorders in the lower limb. While multiple studies have tracked the progression of knee osteoarthritis (OA) or midfoot OA and have studied the effect of orthotic treatment on the foot pain across individuals [1], there are few biomimetic models of the foot that can study and associate …

Characterization Of The Fatigue Threshold Behavior Of Uhmwpe, Bethany B. Smith, Anurag Roy, Robert O. Ritchie, Lisa A. Pruitt

Faculty Journal Articles

Ultra-high-molecular-weight-polyethylene (UHMWPE) has been the material of choice for bearings in total joint replacements (TJRs) for decades as a result of its excellent wear resistance, chemical inertness, energetic toughness, low friction, and biocompatibility. Utilization of this polymer in orthopedic devices requires oxidation, wear, and fatigue resistance. Balancing these important properties by tailoring processing techniques and modulating microstructural features has been an ongoing endeavor in the field. Research into the clinical applications of UHMWPE has primarily focused on the challenges of wear and oxidation while studies into the realm of fatigue have been more limited. Literature gaps exist in fully understanding …

Comparison Of Peening Effect Between Additive Manufacutred And Drawing Titanium Alloy, Hitoshi Soyama

15th International Conference on Shot Peening

Although additively manufactured (AM) metals are attractive materials, their remarkable weak fatigue properties are an obstacle to their practical application. Thus, post-processing to improve their fatigue properties is required. In the present study, powder bed fusion using laser sintering titanium alloy, i.e., PBF-LS/Ti6Al4V was treated by shot peening (SP), submerged laser peening (SLP), cavitation peening (CP), and fine particle bombarding (FPB), then the fatigue properties were investigated by a torsional fatigue test, comparing with drawing Ti6Al4V. It was revealed that the fatigue strength at 10⁷ was 446 ± 5 MPa for PBF-LS/Ti6Al4V treated by FPB+CP, 359 ± 9 MPa …

Nonlinear Analytical Models Of The Seismically Isolated ``Frame-Boiler'' System With Cantilever-Type Hysteresis Dampers, Aleksandr Mikhailovich Anushchenko, Dmitrii Evgenievich Bondarev, Aleksandr Yurievich Schukin

Journal of Sustainable Construction Materials and Technologies

This study shows results of development of the ``frame-boiler'' system with hysteresis dampers analytical model. Hysteresis dampers are used as boiler antiseismic bracing. It is noted that simplified analytical models are necessary at the stage of preliminary iterative calculations, when a CAE-modeling is impractical due to significant time costs. The authors have proposed 2 options of analytical models: 2-mass model and 3-mass model. The differential equations of motion for each model are written below. The results of the calculation for seismic impacts are compared with the finite element model. It is shown that 3-mass model gives good match of results …

Advancing Sustainable Structural Solutions: Hemp Fiber-Reinforced Polymer (Hfrp) Reinforcement Bars For Concrete Applications Through Material Selection, Simulation, And Pathways For Future Development, Thomas Cadenazzi, Busra Keles

Journal of Sustainable Construction Materials and Technologies

This paper investigates innovative Hemp Fiber-Reinforced Polymer (HFRP) rebars as a sustainable alternative to conventional Carbon Steel (CS) and Glass Fiber-Reinforced Polymer (GFRP) rebars used as reinforcement in concrete structures. The feasibility of HFRP rebars is assessed, focusing on mechanical properties and sustainability advantages. A virtual tensile test on a modeled M19 HFRP rebar, conducted using Autodesk's Fusion 360, demonstrates tensile strength comparable to CS 235 and greater environmental sustainability than GFRP, despite a slight reduction in stiffness. The study also considers the potential of graphene fiber integration to enhance mechanical properties, underscoring HFRP's adaptability. Findings suggest that HFRP rebars, …

Comparative Analysis Of Life Cycle Assessment Of Traditional And Contemporary Timber Buildings, Sadık Akşar, Gökçe Tuna

Journal of Sustainable Construction Materials and Technologies

Wood has long been used as a primary building material, but with the Industrial Revolution and the spread of multi-story structures, its structural limitations became evident. In the 21st century, engineered timber products have reintroduced wood as a sustainable alternative, offering advantages such as lightness, rapid assembly, and recyclability. At the same time, buildings are responsible for significant environmental impacts, making assessment methods essential. Life Cycle Assessment (LCA) is one of the most widely used tools for evaluating these impacts across all stages of a building’s life cycle. This study applies LCA to timber construction systems, focusing on both traditional …

Sustainable Paving Block Development: Utilizing Rejected Coal As Filler And Assessing Its Impact On Paving Block’S Properties, Siti Nikmatin, Allen Kurniawan, Heriansyah Putra, Rima Fitria Adiati, Riawan Ma’Ruf, Dwi Arso Yedi Irwanto

Journal of Sustainable Construction Materials and Technologies

This study investigated the potential use of rejected coal as a fine aggregate filler in paving block production. Comprehensive characterization of the rejected coal was conducted, including toxicity, physical, chemical, and mineralogical analyses of the coal. The results showed that the rejected coal met environmental safety standards (TCLP) and had suitable properties as an aggregate. Paving blocks were produced by incorporating different proportions of rejected coal fillers and were tested for compressive strength, water absorption, and density. The optimal mix with 35% rejected coal filler as a replacement of stone ash achieved a compressive strength of 14.61 MPa, water absorption …

Numerical Comparative Study Of The Thermal Performance And Load-Bearing Capacity Of Hollow Clay Bricks Used In Construction In Libya, Osama Lawej, Mahmoud Ahmed, Ismael Ehtiwesh

Journal of Sustainable Construction Materials and Technologies

The optimization of structural and thermal performance in building components is a key challenge in sustainable construction, particularly in hot climate regions like Libya. Hollow clay bricks are widely used due to their local availability and affordability; however, their internal geometry is often not optimized for thermal resistance or mechanical integrity. This study addresses this gap by numerically investigating the effect of cavity geometry on the load-bearing capacity and thermal insulation performance of hollow clay bricks. Three configurations were analyzed, including two commercial designs from the Libyan market and a newly proposed arched cavity design. Finite Element Method (FEM) simulations …

Developing A Modular Circular Wall Over-Clad System For Facade Thermal Upgrade In Deep Energy Retrofit, Patrick Daly

Journal of Sustainable Construction Materials and Technologies

The EU has implemented several policy and legislative initiatives aimed at decarbonisation and circularity transition of the Built Environment including a strategy for large scale renovation of the building / housing stock. Modularised construction solutions are argued to be a potential acceleration pathway toward this objective. Yet there remains issues and challenges in implementing such strategies in a complex and heterogeneous stock and sector. This research investigates this decarbonisation pathway, examining the feasibility and potential of applying a modularised construction over-clad system, based on advanced circularity, in the deep energy retrofit of social housing. The research is based on a …

Influence Of Obesity On Knee Joint Mechanics: A Subject-Specific Musculoskeletal Modeling Approach, Ryan C. Knowles

Electronic Theses and Dissertations

Obesity has been consistently linked to knee osteoarthritis (KOA), a debilitating joint disease. While prior work has shown that obese individuals often walk with altered biomechanics compared to normal-weight (NW) individuals, which may accelerate KOA progression, less is known about how these mechanics affect load distribution between the medial and lateral tibiofemoral (TF) compartments, particularly during higher-demand activities. This study developed subject-specific musculoskeletal models of five obese and five NW individuals, incorporating CT-based bone measurements and individualized joint contact points. Simulations were driven by six degree-of-freedom (6DOF) kinematics obtained from high-speed stereo radiography (HSSR) to predict TF loading and associated …

Ceramic Waste As Sustainable Material In Self-Compacting Concrete: Experimental Study And Ann Predictive Modeling, Abderrezak Bouziane, Houssam Slimanou, Mohamed Amin Bouzidi, Nedjima Bouzidi

Journal of Sustainable Construction Materials and Technologies

Recycling of ceramic waste in the construction sector is a promising option for reducing the environmental impacts of the concrete industry. The main objective of this study is the elaboration of a solid predictive model for ceramic waste based self-compacting (SCC) concrete properties, using artificial neural networks (ANN). This further, reduces its environmental impact without compromising satisfactory performance. An experimental approach was adopted with different substitution ratios: 0 to 30 wt% and particle sizes ranging from 3-8 mm and 8-15 mm. Tested properties of modified SCC as compressive strength at 7 and 28 days (fc7, fc28), spread (L), sieve stability …

Comparative Study On The Performance Of Ggbs, Uggbs, And Rha-Incorporated Cement Mortar Mixes, Devansh Goel, Sudarshan D. Kore

Journal of Sustainable Construction Materials and Technologies

The environmental footprint of cement production has accelerated the pursuit of sustainable alternatives in the construction industry. Supplementary cementitious materials (SCMs), particularly those derived from industrial and agricultural waste, offer a promising approach to reducing cement consumption while maintaining performance. This study evaluates the fresh and mechanical behavior of binary, ternary, and quaternary cementitious mortar blends incorporating ground granulated blast-furnace slag (GGBS), ultrafine GGBS (UGGBS), and rice husk ash (RHA) as partial replacements for cement. A total of 32 mortar mixes were designed with water-to-binder (w/b) ratios ranging from 0.3 to 0.5 and varied replacement levels of RHA (0-20%), GGBS …

Functional Biopolymers Applied To Sustainable Technologies In The Environment And Healthcare, Fengjie He

UNLV Theses, Dissertations, Professional Papers, and Capstones

Biodegradable polymeric materials (biopolymers) are naturally derived materials known for their excellent biocompatibility, biodegradability, sustainability, and versatile chemical functionality. They have attracted increasing attention in various applications as alternative to synthetic materials ranging from food packaging to tissue engineering. Meanwhile, with intrinsic advantages, biopolymers have also emerged as promising materials in addressing contemporary challenges in both biomedical and environmental fields. Motivated by the significant potential of biopolymers and the growing need for sustainable materials, my research focuses on the design and engineering of biodegradable polymers with novel modification methods and application directions. In this work, two representative biopolymers are selected: …

Towards Improving Computational Modeling Of The Lumbar Spine - Impact Of Material Properties And Laminotomy On Spinal Biomechanics, Isaac K. Kumi

Mechanical & Aerospace Engineering Theses & Dissertations

Spinal ligaments play a crucial role in maintaining the mechanical stability of the lumbar spine. These dense, collagenous tissues not only resist excessive motion but also distribute loads between spinal components to protect neural structures. Traditionally, the mechanical response of ligaments has been modeled using linear elastic assumptions, which treat the tissue as having a constant stiffness regardless of loading history. While this simplifies analysis, it fails to capture the time-dependent behaviors, such as creep, stress relaxation, and hysteresis, that are characteristic of biological tissues.

Viscoelastic modeling may provide a more physiologically accurate representation by incorporating both elastic and viscous …

Effect Of Moderate Decrease In Contractility On Epithelial Cell-Cell Contacts Under External Stretch, Saika Sharmin

Mechanical & Aerospace Engineering Theses & Dissertations

Epithelial tissues are characterized by extensive cell–cell contacts and often subject to stretch during normal function. Cell-cell contact adhesion strength maintains mechanical continuity from cell to cell. Mechanical forces exerted by cells via actomyosin contractility are known to strengthen cell-cell adhesions to a certain extent. While it is known that a large decrease in contractility causes cell-cell contact rupture due to weakened adhesions, it is unclear how a moderate reduction in contractility affects cell-cell junction stability. Here, we studied how a moderate inhibition of non-muscle myosin II (NMII) affects the integrity of epithelial cell-cell contacts, especially when subject to the …

The Utilization Of Basic Oxygen Furnace Slag As Fine Aggregates In Concrete: Physical, Mechanical, And Durability Properties, Hakan Ozkan

Journal of Sustainable Construction Materials and Technologies

This study examines the feasibility of using basic oxygen furnace slag (BOFS) as an alternative to fine crushed limestone aggregate in concrete. BOFS is sourced from two steel production facilities in Türkiye, designated as I-BOFS and E-BOFS. The experimental results showed that as the E-BOFS aggregate replacement ratio increased, the water-to-cement (w/c) ratio increased to maintain the target workability. The concrete mixtures incorporating E-BOFS exhibited consistent reductions in the compressive strength with an increase in the BOFS ratio. At the same time, I-BOFS maintained higher compressive strength, with only minor losses up to 80% of the substitution ratio. Flexural strength …

Development Of A Self-Cured Alkali-Activated Mortar, Kübra Ekiz Barış

Journal of Sustainable Construction Materials and Technologies

Alkali-activated mortars (AAM) can be produced with self-curing (SC), which supplies internal moisture to accelerate alkaline-activation reactions. The aim of using SC is to make AAMs with an early-age strength without any additional curing energy consumption and higher CO2 emissions, and to obtain in-situ practical advantages that enable the large-scale application of AAMs. The previous study produced natural pozzolan-based AAMs by applying energy-intensive heat (HC), microwave (MWC), and hybrid (HC+MWC) curing. This study investigates alternative curing regimes that reduce production energy without compromising material properties. The impacts of air curing (AC), water curing (WC), and SC on the properties were …

Naoh Molarity Effect On Mechanical And Hydrochloric Acid Resistance Of Geopolymer Mortar Based On Slag, Mahmoud Ziada, Zahraa Mohammed Kamil Al-Mayali

Journal of Sustainable Construction Materials and Technologies

The present research investigates the influence of different sodium hydroxide (NaOH) molarities on the mechanical characteristics and hydrochloric acid (HCl) resistance of geopolymer grouts manufactured from ground granulated blast-furnace slag (GGBS). Geopolymer mortars have attracted interest as sustainable substitutes for traditional cementitious materials due to their advantageous environmental effects and enhanced durability features. This study involved the fabrication of geopolymer mortar specimens by altering the NaOH molarity (M) from 6 M to 14 M. The mechanical and physical qualities were assessed using compressive strength, capillary water absorption, flexural strength, slump flow, and ultrasonic pulse velocity (UPV) tests. Subsequently, the geopolymer …

Effect Of Expanded Perlite And Exfoliated Vermiculite Aggregate Additives On Water Vapor Permeability Performance Of Cement-Based Lightweight Mortars, Lütfullah Gündüz, Şevket Onur Kalkan

Journal of Sustainable Construction Materials and Technologies

Vapor diffusion is the movement of water vapor molecules through porous materials such as wood, insulation products, and lightweight wall elements due to differences in vapor pressure. Vapor retarders are used to control vapor diffusion through wall sections and surfaces. All building materials provide some resistance to vapor diffusion, and the amount of resistance varies depending on the material's properties. These properties can vary with relative humidity and moisture content, age, temperature, and other factors. Vapor resistance is usually expressed using the inverse term of ``vapor permeability,'' which is the relative ease of vapor diffusion through a material. Water vapor …

Rubber-Modified Self-Compacting Mortar: Evaluating Setting Time And Strength Development, Navvar Makansi, Süleyman Ipek, Erhan Güneyisi

Journal of Sustainable Construction Materials and Technologies

The influence of using crumb rubber (CR) obtained from the second scraping of used tires as fine aggregate in manufacturing self-compacting mortar (SCM) was investigated experimentally in this study. To explore this, natural fine aggregate in SCM mixes was partially replaced with CR at levels ranging from 5% to 25% by total fine aggregate volume. Two mix series, one with a total binder of 500 kg/m3 and the other with a 540 kg/m3 binder, were designed at water-to-binder ratios of 0.40 and 0.33. Ordinary Portland cement (80% by weight) and fly ash (20% by weight) were used to manufacture mortars. …

Smart Traffic Management At Intersections, Gezim Hoxha, Piotr Gorzelanczyk, Rame Likaj, Shaban Thaqi, Flori Cikaqi

Journal of Sustainable Construction Materials and Technologies

Effective traffic control methods, whether at intersections or other nodes within the road network, play a critical role in ensuring traffic quality and safety. An inappropriate choice of traffic control techniques or poorly optimized light signal programming at intersections often leads to unsatisfactory service levels. This study specifically addresses the issues related to intersections controlled by traffic lights. It aims to identify the key factors influencing the regulation and programming of traffic lights, with a focus on using different microcontrollers, particularly the Raspberry Pi. The primary objective of this research is to develop a methodology and an adapted programming approach …

Identification Of Barriers And Drivers In The Adoption Of Sustainable Construction Practices In The Turkish Construction Industry: Exploratory Factor Analysis, Tülay Çivici, Mustafa Serhan Ünlütürk

Journal of Sustainable Construction Materials and Technologies

Although the importance of sustainability in the construction industry has been emphasised by many researchers and endorsed by many authorities, it is clear that the practices in the industry still need to be improved. The primary issue for adopting sustainable practices in the construction industry is identifying the barriers and drivers. For this reason, the study analysed the literature to identify the critical barriers and incentives for adopting sustainable practices in the construction industry. In light of the information from the literature, the necessary barriers and motivators in adopting sustainable practices in the construction industry were determined, and a questionnaire …

Synergistic Effect Of Alccofine As Partial Replacement Of Cement And M-Sand As Sand Substitution In Concrete For The Assessment Of Mechanical And Microstructural Properties, Yellinedi Madhavi, R.S. Ravichandran, J. Saravanan, N. Venkatasairam Kumar

Journal of Sustainable Construction Materials and Technologies

Using supplementary cementitious materials (SCMs) and traditional binder mass has revolutionized concrete production technology in the building industry. This study examines how Alcofine-1203 affects the microstructure and mechanical characteristics of concrete. The mechanical qualities of the mixtures were evaluated using six different mixes prepared for each M25 and M40 Grade. In the proposed mixes, cement is substituted with alccofine at 0 to 25% and M-Sand as fine aggregate. The Compressive strength and ultrasonic pulse velocity were assessed after 3, 7, 14, 28, 56, and 90 days of curing, and split tensile strength and flexure strength were evaluated after 28 and …