Engineering Commons^™

Design And Modeling Of An Aluminum Smelting Process To Analyze Aluminum Smelter And Identify The Alternative Uses Of Nuclear Power Small Modular Reactor, Rajesh Ramkrushna Patharabe

Masters Theses

"This thesis focuses on design and analysis of an Aluminum Smelting process using computer simulation which performs a dynamic state computation. The objective is to develop a Dynamic Simulation Model of an Aluminum Smelter using Mimic Simulator to analyze the dynamic behavior of an Aluminum Smelter to evaluate strategies for alternative design or uses of Nuclear Power Small Modular Reactor to improve the efficiency of the process and to reduce the heat losses.

Increasing energy needs, decrease of the availability of cheap electricity and the need to reduce the greenhouse gases emissions are the biggest hurdles for running Aluminum smelters …

Recovery Of Phosphate Minerals From Plant Tailings Using Direct Froth Flotation Process, Ashraf Alsafasfeh

Masters Theses

"The wastes produced from phosphate industry presents many challenges due to the economic and environmental impacts of their disposal. In the meantime, scarcity of high-grade phosphate ores persuades researchers to find novel methods of upgrading these wastes (secondary sources) and recycling them in the production plant circuit. The goal of this study is to investigate the potential to upgrade the phosphorus content in the tailing produced from a phosphorous production plant using direct froth flotation process. Characterization studies such as X-ray diffraction (XRD), scanning electron microscopy (SEM), and mineral liberation analysis (MLA) were first conducted to identify the mineralogical and …

Biodegradable Capacitive Pressure Sensor Toward Temporary Implants For Intervertebral Pressure Monitoring, Devdatt Chattopadhyay

Masters Theses

"The objective of this thesis is to demonstrate a new class of implantable biomedical device, based on biodegradable borate glass as the substrate material that can be potentially used to monitor the intervertebral pressure in the lumbar region of the human body. Two major types of implantable biomedical devices include the permanent prosthetic devices such as pacemakers and the temporary implants for short-term intervention and monitoring. Unless surgically removed after their intended operation, the temporary implants are left inside the body causing electromagnetic issues, latent complications and various biomechanical safety concerns. In order to address this issue, a new device …

Cfrp Retrofitting Schemes For Prestressed Concrete Box Beams For Highway Bridges, Hussein A. Herish, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

This paper investigates various retrofitting schemes for a prestressed concrete box beam using carbon fiber reinforced polymer (CFRP) sheets with the goal of increasing flexural strength. A simply-supported box beam is studied with a constant uniformly distributed load and three gradually increasing concentrated loads proportional to HS20 truck loading of the Association of State Highway and Transportation Officials (AASHTO). Various retrofitting schemes are considered each with single, double, and triple CFRP sheets, respectively, installed in high compression and tension regions. Cross-sectional nonlinear moment-curvature relations are developed and coupled with a finite-difference solution algorithm to predict load-deflection relations for both retrofitted …

Development Of An Excel® Rocket Simulator For Application In Middle School, High-School, And University Stem Education, Melvin Lee Hortman

All Master's Theses

Water rocket activities are one of the most popular STEM activities used in primary, secondary, and higher education yet are void of engineering, though engineering is heavily implied in the STEM acronym. This study investigated the amount of engineering present in water rocket activities, and options for emphasizing engineering more in water rocket activities using an open-platform flight simulator for use by educators to enable students to predict flight parameters of a water rocket they designed, and test those predictions against experimental data. The simulator was constructed in Excel® with many functions, but the function validated in this study was …

Fate And Impacts Of Triclosan, Sulfamethoxazole, And 17Β-Estradiol During Nutrient Recovery Via Ion Exchange And Struvite Precipitation, Yiran Tong, Patrick J. Mcnamara, Brooke K. Mayer

Civil and Environmental Engineering Faculty Research and Publications

Increasing emphasis on resource recovery from wastewater highlights the importance of capturing valuable products, e.g., nutrients such as nitrogen and phosphorus, while removing contaminants, e.g., organic micropollutants. The objective of this research was to evaluate the fate of the micropollutants triclosan (present as a mixture of neutral and anionic species at neutral pH), 17β-estradiol (neutral at neutral pH), and sulfamethoxazole (anionic at neutral pH) during nutrient recovery using ion exchange-precipitation. Adsorption of the three micropollutants to the phosphate-selective ion exchange resins LayneRT and DOW-HFO-Cu ranged from 54% to 88% in Milli-Q water tests and 50% to 71% in …

Curriculum Innovation: Incorporating The Kern Engineering Entrepreneurial Network (Keen) Framework Into Online Discussions, Lisa Bosman, Brooke K. Mayer, Patrick J. Mcnamara

Civil and Environmental Engineering Faculty Research and Publications

The purpose of this study was to respond to the following research question: How does the Kern Engineering Entrepreneurial Network (KEEN) framework build interest in technical topic areas, impact student learning outcomes, and develop the entrepreneurial mindset when applied to the engineering classroom? The KEEN framework was developed to combine the entrepreneurial mindset with engineering education to produce a more valuable, strategically prepared engineer, rather than simply an “obedient engineer”. The framework proposes that the entrepreneurial mindset of students is increased by promoting curiosity, encouraging connections, and creating value. The results from this work provide insight into the impact and …

Virtual Reality Of Earthquake Ground Motions For Emergency Response, Ting Lin

Civil and Environmental Engineering Faculty Research and Publications

Ground motions interface earthquake science and engineering to advance understanding of seismic hazards and risk. Virtual reality provides an attractive tool to extend knowledge of the research community to a larger audience. This work visualizes emergency response under extreme motions, in the CAVE of the MARquette Visualization Laboratory. The visualization (a) displays ground motions (from the science community), (b) inputs these motions to structural models (from the engineering community) and illustrates the resulting responses, (c) translates structural responses to damage states of building elements, (d) creates a virtual room subjected to the perception associated with such earthquake shaking, and (e) …

Editorial" Fibre Reinforced Polymer Composites For Structural Applications In Construction, Jun Deng, Marcus M.K. Lee, Baolin Wan, Giuseppina Amato

Civil and Environmental Engineering Faculty Research and Publications

No abstract provided.

Baseline Rolling Resistance For Tires’ On-Road Fuel Efficiency Using Finite Element Modeling, Jaime Hernandez, Imad L. Al-Qadi, Hasan Ozer

Civil and Environmental Engineering Faculty Research and Publications

Calculation of truck tires rolling resistance, using the finite element method and considering variables such as incompressible visco-hyperelastic rubber materials, accurate tire geometry and steady temperature distribution, is presented. The model was validated using experimentally measured contact area and contact stresses. Rolling resistance was calculated for three values of axle load, tire inflation pressure, temperature and speed. In addition, regression analysis was used to propose a mathematical expression for predicting rolling resistance as a function of the considered variables. Finally, the contribution of tire’s rubber components to the internal energy was quantified, and it was found that sidewall and subtread …

A Method For Evaluating Aircraft Electric Power System Sizing And Failure Resiliency, Cory Kenneth Kross

Master's Theses

With the More Electric Aircraft paradigm, commercial commuter aircraft are increasing the size and complexity of electrical power systems by increasing the number of electrical loads. With this increase in complexity comes a need to analyze electrical power systems using new tools. The Hybrid Power System Optimizer (HyPSO) developed by Airbus SAS is a simulator designed to analyze new aircraft power systems. This thesis project will first provide a method to assess the reliability of complex aircraft electrical power systems before and after failure and reconfiguration events. Next, an add-on to HyPSO is developed to integrate the previously developed reliability …

The Evaluation Of Ensemble Sentiment Classification Approach On Airline Services Using Twitter, Zechen Wang

Dissertations

In the field of sentiment classification, much research has been done on reviews of topics such as movies, software and books. Little research has been done in the airline service domain. In the airline industry, the use of social media as a customer service tool has become a growing phenomenon. The research conducted by Wan and Gao (2015) has proposed an ensemble classification approach for airline service sentiment classification using Twitter data. In accordance, the objective of improving the performance of ensemble classification approach is the primary consideration. This research proposed new hybrid classification approach that uses the state-of-art approach …

Computational Studies On Biomechanics Of Concussion And On Efficacy Of Football Helmets, David Labyak

Dissertations, Master's Theses and Master's Reports

Football helmets have been used for many years to prevent head injuries to players. Over the years, the helmet design has evolved from a crude leather head covering to the more recent form fitting helmets that are seen today. The one design feature that has been common in the majority of all helmets is a hard polycarbonate shell with a foam cushion padding. The main goal of the padding layer was to reduce the amount of linear acceleration during an impact event. The one feature that has been overlooked is how stiff the padding is in rotation.

The purpose of …

Utilizing Reprap Style 3d Printers For The Manufacturing Of Composite Heat Exchangers, John Laureto

Dissertations, Master's Theses and Master's Reports

The low cost 3D printing market is currently dominated by the application of RepRap (self-replicating rapid-prototyper) variants. Presented in this document are practical utilizations of RepRap technology. Developed are innovative processes to manufacture composite materials systems for thermal management solutions.

First, a laser polymer welder system is validated by quantifying maximum peak load and weld width of linear low density polyethylene (LLDPE) lap welds as a function of linear energy density. The development of practical engineering data, in this application, is critical to producing mechanically durable welds. Developed laser and printer parameter sets allow for manufacturing of LLDPE multi-layered heat …

Design Of Robust Hydrogel Based On Mussel-Inspired Chemistry, Yuan Liu

Dissertations, Master's Theses and Master's Reports

The structure of catechol is found in mussel adhesive proteins and contributed to both wet-resistant adhesion and cohesive curing of these proteins. A synthetic nano-silicate, Laponite was incorporated into catechol-containing hydrogels and the hydrogel network-bound catechol formed strong reversible interfacial interaction with Laponite. The contribution of incorporated catechol-Laponite reversible interfacial interactions to the mechanics of hydrogels constructed by different strategies was studied. In the first strategy, Laponite and catechol were introduced into the double network hydrogel (DN) via the free radical co-polymerization of a catechol-containing monomer, backbone monomer, and crosslinker. The introduction of catechol-Laponite interactions significantly improved the compressive strength …

A Study Of High Temperature Heat Pipes And The Impact Of Magnetic Field On The Flow Of Liquid Metal, Udit Sharma

Dissertations, Master's Theses and Master's Reports

A study of high temperature heat pipe was conducted to understand its characteristics. A review of working fluid, temperature, wick structure, problems, operational limit and applications was done. Alkali metal were concluded as the most viable candidate for the working fluid.

The impact of three parameters namely magnetic field, heat flux and temperature was analyzed on the performance of HTHP (High Temperature Heat Pipe). The presence of magnetic field had the most considerable impact on reducing the pumping limit of the heat pipe while the temperature had almost negligible effect. Magnetic field results in the pressure drop and adversely affect …

Advanced Uses For Carbon Nanotubes: A Spherical Sound Source And Hot-Films As Microphones, Micaela M. Thiery

Dissertations, Master's Theses and Master's Reports

Super-aligned carbon nanotube (CNT) thin-film is used to create thermophones. The thermal properties of CNT film allow it to rapidly heat and cool when supplied AC power producing temperature and pressure gradients and, therefore, audible sound. The advantages of CNT thermophones include eliminating all moving components of traditional speakers and reducing the weight of the speaker itself by using CNT film, which is nearly weightless. Additionally, the flexibility of CNT film provides the unique opportunity to construct loudspeakers of various sizes and geometries. In this work, a spherical CNT thermophone is designed, manufactured, and tested for directivity with the overall …

Evaluation Of Thermal Stability Of Ausferrite In Austempered Ductile Iron Using Differential Scanning Calorimetry, Karl Warsinski

Dissertations, Master's Theses and Master's Reports

Austempered Ductile Iron (ADI) is prone to changes in microstructure and mechanical properties when exposed to elevated service temperatures. Differential Scanning Calorimetry has been used to evaluate the stabilizing effects of copper, nickel, molybdenum, and cobalt on the ausferrite structure. Previous studies have conflated the effects of various alloy additions, and little effort has been made to systematically catalog the effects of individual elements. The focus of the current research has been to identify alloying elements that more strongly stabilize the ausferrite structure in order to improve service life of ADI at elevated temperatures. Nickel has been shown to have …

Analysis Of Aeroelastic Effects On The 3-Dimensional Interference Of Wind-Turbine Rotors, Anurag Rajan

Dissertations, Master's Theses and Master's Reports

Greater penetration of wind energy demands better utilization of available wind. This has led to a formidable increase in the rotor diameter over the past few years. Bigger rotors call for lighter, more flexible blades to reduce loads and improve fatigue life. As a result, future blades will deform substantially more than the relatively stiff blades of the past. More efficient use of wind power also calls for incorporating advanced active and passive control strategies and increasing the range of velocities over which wind energy is captured. Hence an improvement in the quality of numerical simulations capable of capturing the …

Accuracy Assessment Of 3d Point Clouds Generated By Photogrammetry From Different Distances, Zhongming An

Dissertations, Master's Theses and Master's Reports

Photogrammetry is playing more important role in many industries today, and thanks to Structure-from-Motion, 3D point clouds and 3D meshes can be produced and be used as a resource for surveying and documentation.

In this project, the accuracies of Structure-from-Motion generated point clouds from pictures taken from different distances are assessed to determine if the distance has a significant impact on the accuracy and what kind of pattern the accuracies will show if there is any. Due to space limit, an improvised turntable was used in order to mimic the condition where camera moves around the object. Multiple images were …

Control Of A Powered Ankle-Foot Prosthesis: From Perception To Impedance Modulation, Guilherme Aramizo Ribeiro

Dissertations, Master's Theses and Master's Reports

Active ankle prostheses controllers are demonstrating gaining smart features to improve the safety and comfort offor users. The perception of user intention to modulate the ankle dynamics is a well-known example of such feature. But not much work focused on the perception of the environment, nor how the environment should be included in the mechanical design and control of the prosthesisprostheses. The proposed work aims to improve the feasibility of integrate the environment perception integration intoto the prostheses controllersler, and to define the desired ankle dynamics, as mechanical impedance, duringof the human walk on different environmental settings. As a preliminary …

Life Cycle Assessment (Lca) Of Ore Transportation Route Alternatives For Eagle Mine, Soumith Kumar Oduru

Dissertations, Master's Theses and Master's Reports

Transportation sector at large is a major consumer of fossil fuels and constitutes more than a quarter of the global greenhouse gas emissions. When making infrastructure route and mode choice decisions for new freight-oriented projects, it is important that environmental and emissions considerations are included as an integral part of the selection process. Emissions from freight transportation projects related to mining and natural resource industry are especially critical, as they involve high volumes and tonnages often in pristine environments. The most logical time for emissions analysis is during modal and route analysis that are often conducted in the planning stage …

Molecular Modeling Of Aerospace Polymer Matrices Including Carbon Nanotube-Enhanced Epoxy, Matthew Radue

Dissertations, Master's Theses and Master's Reports

Carbon fiber (CF) composites are increasingly replacing metals used in major structural parts of aircraft, spacecraft, and automobiles. The current limitations of carbon fiber composites are addressed through computational material design by modeling the salient aerospace matrix materials. Molecular Dynamics (MD) models of epoxies with and without carbon nanotube (CNT) reinforcement and models of pure bismaleimides (BMIs) were developed to elucidate structure-property relationships for improved selection and tailoring of matrices.

The influence of monomer functionality on the mechanical properties of epoxies is studied using the Reax Force Field (ReaxFF). From deformation simulations, the Young’s modulus, yield point, and Poisson’s ratio …

Model-Based Control Of An Rcci Engine, Akshat Abhay Raut

Dissertations, Master's Theses and Master's Reports

Reactivity controlled compression ignition (RCCI) is a combustion strategy that offers high fuel conversion efficiency and near zero emissions of NOx and soot which can help in improving fuel economy in mobile and stationary internal combustion engine (ICE) applications and at the same time lower engine-out emissions. One of the main challenges associated with RCCI combustion is the difficulty in simultaneously controlling combustion phasing, engine load, and cyclic variability during transient engine operations.

This thesis focuses on developing model based controllers for cycle-to-cycle combustion phasing and load control during transient operations. A control oriented model (COM) is developed by using …

Multiscale Modeling: Thermal Conductivity Of Graphene/Cycloaliphatic Epoxy Composites, Sorayot Chinkanjanarot

Dissertations, Master's Theses and Master's Reports

The thermal property of epoxy as the binder in the Carbon Fiber (CF) composites, especially thermal conductivity is important to achieve the advance technology and to improve the performance of materials. Multiscale modeling including molecular dynamic (MD) modeling and micromechanical modeling is used to study the properties of neat Cycloaliphatic Epoxies (CE) and Graphene nanoplatelet (GNP)/CE with and without covalent functionalization.

The thermal properties (glass-transition temperature, thermal expansion coefficient, and thermal conductivity) and mechanical properties of CE system are investigated by MD modeling using OPLS-All Atom force field. A unique crosslinking technique is developed to achieve the cured CE models …

Planning For Intermittent Water Supply In Small Gravity-Fed Distribution Systems: Case Study In Rural Panama, Frank B. Dubasik

Dissertations, Master's Theses and Master's Reports

Intermittent water supply (IWS) is defined as a piped water distribution system that operates in an intermittent fashion, i.e. less than 24 hours per day. Piped water distribution systems are designed to operate with continuous water supply (CWS), meaning the system is operated continuously and maintains positive pressures in the distribution network. Operating a system in an intermittent fashion can cause inequality of access in a water distribution system. It may also result in lower water quality and wear and tear on the system.

In the community of Espavé, Panamá a new water system was installed and brought online in …

Modeling Mass And Thermal Transport In Thin Porous Media Of Pem Fuel Cells, Vinaykumar Konduru

Dissertations, Master's Theses and Master's Reports

Water transport in the Porous Transport Layer (PTL) plays an important role in the efficient operation of polymer electrolyte membrane fuel cells (PEMFC). Excessive water content as well as dry operating conditions are unfavorable for efficient and reliable operation of the fuel cell. The effect of thermal conductivity and porosity on water management are investigated by simulating two-phase ow in the PTL of the fuel cell using a network model. In the model, the PTL consists of a pore-phase and a solid-phase. Different models of the PTLs are generated using independent Weibull distributions for the pore-phase and the solid-phase. The …

Social, Economic, And Technical Feasibility Of Ablution Gray Water Reuse In Tong, Ghana, Adrienne Masterton

Dissertations, Master's Theses and Master's Reports

Water insecurity is a constant stressor for millions of people around the globe. The potential of gray water as an alternative water source has gained increasing attention in the literature. In water-scarce Muslim communities, the practice of ablution – the rinsing of the face, hands, and feet before prayer – offers a unique opportunity for gray water reuse.

This report investigates the feasibility of treating and reusing ablution gray water (AGW) with respect to religious acceptability, economic measures, and physical parameters in Tong, a rural community of Muslim subsistence farmers in northern Ghana. Investigatory tools included: household water use surveys, …

Minimum Time Control Of Paralleled Boost Converters, Shishir Patel

Dissertations, Master's Theses and Master's Reports

Demand for electrification is booming in both, traditional and upcoming generations of technological advancements. One of the constituent blocks of these electrified systems is Power conversion. Power conversion systems are often constructed by paralleling multiple power converter blocks for high performance and reliability of overall system. An advanced control technique is developed with an aim to optimize system states of heterogeneous power converters within minimum time while maintaining feasible stress level on individual power converter blocks. Practical implementation of real-time controller and performance improvement strategies are addressed. Experimental results validating high performance control scheme, and sensitivity analysis of system states …

Development Of An Evaporation Sub-Model And Simulation Of Multiple Droplet Impingement In Volume Of Fluid Method, Sathya Prasad Potham

Dissertations, Master's Theses and Master's Reports

Droplet collision and impingement on a substrate are widely observed phenomenon in many applications like spray injection of Internal Combustion Engines. Existing Lagrangian models do not provide a comprehensive picture of the outcome of these events and may involve model constants requiring experimental data for validation. Physics based models like Volume of Fluid (VOF) method involve no parametric tuning and are more accurate. The aim of this thesis is to extend the basic VOF method with an evaporation sub-model including an additional vapor phase and implement this model in an open source Computational Fluid Dynamics (CFD) software, OpenFOAM. The new …