Engineering Commons^™

Long-Term Monitoring Of A Landslide In Stone County, Missouri Using High Precision Multi-Temporal Laser Scanning, Benjamin Michael Herries

Masters Theses

"A terrestrial laser scanning survey was conducted over the course of 1.5 years to test and validate a new target tracking method which characterizes the surface and subsurface behavior of soft slope landslides. Reflective spherical Styrofoam targets were mounted onto steel rods and driven into multiple levels of a landslide located in Stone County, Missouri. These targets were scanned a total of seventeen times over the course of the survey and were used as a proxy to measure the displacement of specific areas of the landslide. The three-dimensional point cloud data was processed through a software suite specifically developed to …

Imaging In Karst Terrain Using The Electrical Resistivity And Multichannel Analyses Of Surface Wave Methods, Ragab W. Jaafar

Masters Theses

"Electrical resistivity tomography and multi-channel analyses of surface waves data were acquired at a study area in Phelps County in the south-central part of Missouri. The objectives of the investigation were fourfold: 1) to image the subsurface in the study area to a depth of 70 feet; 2) to compare the ERT images generated using both the dipole-dipole and Wenner-Schlumberger arrays; and 3) to assess how variations in the MASW array configuration affected MASW data quality; and 4) to compare the ERT-estimated depth to top-of-rock and the MASW-generated depth to top-of-rock.

The subsurface in the study area was imaged to …

Mining Asteroids For Volatile Resources: An Experimental Demonstration Of Extraction And Recovery, Egboche Christopher Unobe

Masters Theses

"Gaseous compounds trapped within carbonaceous asteroids may prove to be important targets for prospective space miners in the near-term. Volatile release is from hydrated, hydroxylated and carbonated phases present, making such bodies attractive as feedstock for the production of H₂O, CO₂ and simple organic compounds. A source of these species in orbit provides an opportunity to locally produce space-craft propellant and other life-support gases through the application of In-situ Resource Utilization (ISRU).

For this study, an experimental vacuum system was modified and used to test the technical validity of radiatively heating asteroid simulants to extract contained gaseous …

Application Of Millimeter-Wave Differential Probe For Crack Detection On Riveted Structures, Kuang Ping Ying

Masters Theses

"This thesis proposes the use of a W-band wideband differential probe for crack detection on riveted structures, such as aircraft fuselage lap joints. Detection of crack at its early stage (surface-breaking) is particularly important to prevent the development of a fatigue crack. This probe utilizing millimeter-wave frequencies serves as a viable candidate on detecting surface-breaking cracks, as it can be employed in measurements in a non-contact fashion, while allowing for high spatial-resolution images and the abilities to penetrate through dielectric materials (paint), making it attractive for detecting small cracks. In previous works, a V-band differential probe has shown promise for …

Cathodic Protection Measurement Through Inline Inspection Technology Uses And Observations, Briana Ley Ferguson

Masters Theses

"This research supports the evaluation of an impressed current cathodic protection (CP) system of a buried coated steel pipeline through alternative technology and methods, via an inline inspection device (ILI, CP ILI tool, or tool), in order to prevent and mitigate external corrosion. This thesis investigates the ability to measure the current density of a pipeline's CP system from inside of a pipeline rather than manually from outside, and then convert that CP ILI tool reading into a pipe-to-soil potential as required by regulations and standards. This was demonstrated through a mathematical model that utilizes applications of Ohm's Law, circuit …

Effect Of Fracture Heterogeneity On Proppant Transport And Settling Mechanism, Dhurgham Abdulameer Kadhim

Masters Theses

"Proppant transport modeling through fractures with slickwater fluid systems assumes uniform and homogeneous fracture widths by implying constant fluid behavior at wall boundaries. Hydraulic fracturing mineback operations have demonstrated that induced fractures are heterogeneous and varying in width. This work investigates the impact of fracture width heterogeneity, roughness, and leak-off on ceramic proppant transport and settling, using proppant distribution concepts of Equilibrium Dune Level (EDL) and equilibrium Dune Length (EDX). Experimental work was conducted to investigate the impact of fracture width heterogeneity by varying fracture width along two plexiglass sheets. To mimic actual hydraulic fractures, the injection side was designed …

Developing Restoration Schemes For A Road Transportation Network In The Event Of A Disaster, Ebin Antony

Masters Theses

"Transportation systems such as rail, road, and waterways are key component of critical infrastructure systems, providing connectivity between other components to enable the production and distribution of goods and services. During large scale disasters such as earth quakes and floods, this connectivity is disrupted, restricting or completely halting the flow of goods and services. To ensure that the connectivity between the different modes of transportation are restored in an aftermath of these disruptions, the interdependence between them and the importance of individual elements to the overall connectivity have to be studied and formulated to develop a system-level restoration plan. This …

Geomechanical Analysis Of The Wellbore Instability Problems In Nahr Umr Formation Southern Iraq, Haider Qasim Mohammed

Masters Theses

"Wellbore instability problems play a major rule of increasing nonproductive time (NPT) during drilling processes. In most cases, the cost of drilling a well can be reduced by designing a suitable operational window using geomechanical models. Several wellbore instability problems have been encountered during drilling Nahr Umr Formation in an oil field in southern Iraq. These problems include but are not limited to, mechanical stuck, caving, and tight holes. Data from twenty vertical wells are investigated to reveal the major factors that control the instability problems and to design an optimum mud window. A geomechanical model is developed to determine …

Depth Determination Method For A Trailer-Truck Test-Bed, Aditya Thakur

Masters Theses

"A camera is considered as a good sensing device to obtain visual information from its surrounding environment. In a three dimensional space, a camera has a two dimensional plane. Projection of an object on this plane creates a two dimensional projection and loses information of the third dimension. A single projection is not enough to retrieve the lost third dimensional information about the object. Thus it makes it difficult to use a single camera as a sensing instrument. In this project, we have developed a method that determines the three dimensional information using a single camera. The method utilizes an …

Nuclei Segmentation Using Level Set Method And Data Fusion For The Cin Classification, Ravali Edulapuram

Masters Theses

"This paper deals with the automation of the detection of the cervical cancer through histology images. This process is divided into two parts, corresponding to segmentation and data fusion. The segmentation and classification of the cervical epithelium images is done using hybrid image processing techniques. The digitized histology images provided have a pre-cervical cancer condition called cervical intraepithelial neoplasia (CIN) by expert pathologists. Previously, image analysis studies focused on nuclei-level features to classify the epithelium into the CIN grades. The current study focuses on nuclei segmentation based on the level set segmentation and fuzzy c-means clustering methods. Morphological post-processing operations …

Nuclei Segmentation Of Histology Images Based On Deep Learning And Color Quantization And Analysis Of Real World Pill Images, Sudhir Sornapudi

Masters Theses

"Medical image analysis has paved a way for research in the field of medical and biological image analysis through the applications of image processing. This study has special emphasis on nuclei segmentation from digitized histology images and pill segmentation. Cervical cancer is one of the most common malignant cancers affecting women. This can be cured if detected early. Histology image feature analysis is required to classify the squamous epithelium into Normal, CIN1, CIN2 and CIN3 grades of cervical intraepithelial neoplasia (CIN). The nuclei in the epithelium region provide the majority of information regarding the severity of the cancer. Segmentation of …

Detection Of Mine Roof Failure Using Inexpensive Lidar Technology, Ali Abdullah M. Alzahrani

Masters Theses

"Slope, Roof, and mine wall stability problems are some of the main reasons for deaths at U.S. surface or underground mining. The safety instruments were not enough to prevent that failure or even predict it before it occurs. However, the cost of such a tool that can be helpful in detecting roof failures is very high and not reachable in most instances.

The present study investigates the feasibility of using the M16 Leddar Evaluation Kit to detect the roof failure in mines. The M16 Leddar Evaluation kit cost is between 300$-800$, so it is the reachable price if it provides …

Analysis Of Outsourcing Data To The Cloud Using Autonomous Key Generation, Mortada Abdulwahed Aman

Masters Theses

"Cloud computing, a technology that enables users to store and manage their data at a low cost and high availability, has been emerging for the past few decades because of the many services it provides. One of the many services cloud computing provides to its users is data storage. The majority of the users of this service are still concerned to outsource their data due to the integrity and confidentiality issues, as well as performance and cost issues, that come along with it. These issues make it necessary to encrypt data prior to outsourcing it to the cloud. However, encrypting …

Preformed Particle Gel Conformance Control Performance In Partially Opened Fracture And Fully Opened Fracture Systems, Ghith Ali Ahmed Biheri

Masters Theses

"Conformance problems, such as reservoir heterogeneity can result in a significant decrease in oil recovery, and an excessive water production. Millimeter particle gels (PPG) have been used as conformance control agents to plug open fractures, however, very little research has been conducted to study their ability to plug partially open fractures. This research studies the ability of the PPG to plug partially open fracture to improve conformance and increase recovery in oil reservoirs. Rectangular Sandstone cores were used to conduct the experiments. Fracture widths used include 2, 3.5, 5 mm. For each fracture width, four gel strengths were used; gel …

Bioaccessibility Of Lead From Lead-Contaminated Soil Upon Phosphate Amendment Using A Physiologically-Based Extraction Test, Samantha Jo Dicenso

Masters Theses

"Lead is known to cause health problems in humans, especially children, and an effective in‐situ remediation option has been sought for years. Adding phosphoric acid (PA) to contaminated soil causes a reaction that binds the lead to phosphate to produce pyromorphite (Pb₅(PO₄)₃Cl), a form of lead believed to be non‐bioavailable; however, field trials have given varied results (Bosso et al 2008; Munksgaard and Lottermoser 2011; Tang et al. 2009). One explanation for these results might be the impact of the agent used to raise pH after phosphoric acid addition. In order to examine this explanation soil was collected from the …

Cyber-Physical Manufacturing Cloud: An Efficient Method Of Building Digital Twin For 3d Printer By Adapting Mtconnect Protocol, Liwen Hu

Masters Theses

"The common modeling of a virtual machine is using an information model to describe the physics of machines. The integration of digital twins into productive cyber-physical cloud manufacturing (CPCM) systems imposes strict requirements such as reducing overhead and saving resources for the systems. In this paper, we investigate a new method for building cloud-based digital twins (CBDT), which can be adapted to the CPCM platform. Our method helps reduce computing resources in the processing center and guarantees the fastest speed of the interactions between the human users and physical machines. We introduce a knowledge resource center (KRC) built on a …

Combination Of Bmp-2 And Relaxin To Induce Osteogenesis In Vivo, Sahitya Injamuri

Masters Theses

"Bone grafts are a common procedure for treating craniofacial injuries such as trauma, surgery, and reconstruction. Autografts and allografts have limitations which encourages the use of synthetic bone grafts. While synthetic bone grafts, such as hydroxyapatite (HA) microspheres, are advantageous for their cost and reproducibility, they lack the cells and growth factors needed for proper osteoinduction. Bone morphogenetic protein-2 (BMP-2) has been shown to increase the osteoinduction of grafts but the effective dose is above physiological levels and causes undesired effects on the body. Relaxin has been shown to enhance BMP-2's ability to induce bone formation in vitro and thus …

Quantifying Ceramic Proppant Transport In Complex Fracture Networks, Vivekvardhan Reddy Kesireddy

Masters Theses

"Water fracs have become an essential part of unconventional reservoirs to create deeper fracture networks. Proppant transport in water fracs is challenging in terms of fluids ability to carry the proppant deeper into these fracture networks. This experimental study investigates the impact of the flow rates, fracture widths and complexity controlling the ability of proppant to flow into complex fracture networks. This research attempts to nullify the knowledge gap in understanding width heterogeneity in primary and secondary fractures. This study speaks for settling pattern and proppant transport through a slot flow model with a unique approach to understand stage wise …

Well Log Interpretation And 3d Reservoir Property Modeling Of Maui-B Field, Taranaki Basin, New Zealand, Aziz Mennan

Masters Theses

"Maui-B is one of the largest hydrocarbon-producing fields in the Taranaki Basin. Many previous works have estimated reservoir volume. This study uses 3D property modeling, which is one of the most powerful tools to characterize lithology and reservoir fluids distribution through the field. This modeling will help in understanding the reservoir properties and enhancing the production by selecting the best location for future drilling candidates. In this study, 3D seismic, core, and well log data were used to build and define a structural model, facies analysis, and petrophysical parameters. After well log interpretation and petrophysical parameter calculations, each parameter was …

Characterizing Groundwater Flow At Fort Leonard Wood Using Universal Cokriging With Trend Removal, Rachel Mae Uetrecht

Masters Theses

"Groundwater elevation interpolation is necessary for the prediction of groundwater flow direction and contaminant transport. Kriging is a geostatistical tool commonly used to interpolate groundwater elevation. Kriging requires a relatively large number of monitoring wells at the site of interest. The variogram model is a crucial element to the kriging equations. The variogram modelling process is an iterative procedure that is often very time consuming. This study presents a literature based approach that provides a point of departure for the variogram modelling process as well as other kriging parameters. A literature database is developed in order to provide insight and …

Diffusion And Mechanical Characterization Of Nanoparticle-Enabled Diffusion Controlled Materials, Joseph Louis Volpe

Masters Theses

"Nanoparticle-enabled diffusion control has been shown to rapidly refine multiphase microstructures during slowly cooled casting. This thesis characterizes the diffusion and the mechanical properties of nanoparticle-enabled diffusion controlled materials. To characterize diffusion properties, in situ characterization is performed to verify the nanoparticle enabled diffusion control mechanism. Materials with nanoparticles were observed to decrease the diffusion coefficient by at least one order of magnitude under similar melting conditions as compared to materials without nanoparticles. To understand mechanical properties, the nanoparticles that assembled at the growing interface were characterized under mechanical tensile stress. Nanoparticle-enabled interfaces were observed to improve the interface bond …

Evaluation Of Preformed Particle Gel As A Diverting Agent For Acidizing, Bo Wei

Masters Theses

"Preformed particle gels (PPGs) have been developed and successfully used to improve conformance in heterogeneous reservoirs. However, no research has been reported to show their potential diverting applications in acidizing because of their unknown performance in this process. This work targets on evaluating the potential of PPGs to be used as diverting agents and factors influencing the diverting performance.

The swelling properties of three types of PPGs (PPG #1, #2, and #3) were first studied in brine and acid, including the swelling kinetics and equilibrium, PPG strength, and deswelling performance. Effects of different brine concentration, acid concentration, and temperature were …

Sparse Emission Source Microscopy For Rapid Emission Source Imaging, Ling Zhang

Masters Theses

"In Paper I, Sparse Emission Source Microscopy (ESM) methodology will be introduced and discussed for the localization of major EMI radiation sources in complex and large systems. Traditional ESM method takes abundant and uniformly-distributed scanning points on the scanning plane using a robotic system, which can provide high-quality source images but consumes too much time. This section presents a sparse and nonuniform sampling technique for ESM, which is more time-efficient in identifying major radiation sources, even though the image quality is sacrificed. The feasibility of sparse sampling is mathematically proved, and it is shown that increasing number of points increases …

A New Reinforcement Learning Algorithm With Fixed Exploration For Semi-Markov Decision Processes, Angelo Michael Encapera

Masters Theses

"Artificial intelligence or machine learning techniques are currently being widely applied for solving problems within the field of data analytics. This work presents and demonstrates the use of a new machine learning algorithm for solving semi-Markov decision processes (SMDPs). SMDPs are encountered in the domain of Reinforcement Learning to solve control problems in discrete-event systems. The new algorithm developed here is called iSMART, an acronym for imaging Semi-Markov Average Reward Technique. The algorithm uses a constant exploration rate, unlike its precursor R-SMART, which required exploration decay. The major difference between R-SMART and iSMART is that the latter uses, in addition …

A Bounded Actor-Critic Algorithm For Reinforcement Learning, Ryan Jacob Lawhead

Masters Theses

"This thesis presents a new actor-critic algorithm from the domain of reinforcement learning to solve Markov and semi-Markov decision processes (or problems) in the field of airline revenue management (ARM). The ARM problem is one of control optimization in which a decision-maker must accept or reject a customer based on a requested fare. This thesis focuses on the so-called single-leg version of the ARM problem, which can be cast as a semi-Markov decision process (SMDP). Large-scale Markov decision processes (MDPs) and SMDPs suffer from the curses of dimensionality and modeling, making it difficult to create the transition probability matrices (TPMs) …

Dynamic Electromechanical Characterization Of Ferroelectrics At Cryogenic Temperatures, William Kent Hays

Masters Theses

"Electromechanical coupling in ferroelectric materials has given rise to a myriad of technological applications. Through the complex domain structure of ferroelectrics materials, which are typically stiff and have low damping, can exhibit significant structural damping. The applications for a material with a relatively large Young’s modulus and the ability to damp out vibrations would be useful for structures, more specifically, aerospace structures. The dynamic mechanical properties of ferroelectrics, particularly mechanical properties while an electric field is applied, are not well understood. This is due in part to the lack of experimental methods to measure such properties. Even with recent advancements …

Processing And Properties Of Wc-Based Cu-Ni-Mn-Zn Metal Matrix Composites Produced Via Pressureless Infiltration, Paul M. Brune

Masters Theses

"This research focuses on the processing and properties of tungsten carbide-based (WC-based) Cu-Ni-Mn-Zn metal matrix composites (MMCs) fabricated by pressureless infiltration. The first goal of this project was to test the wettability of Cu-Ni-Mn and Cu-Ni-Mn-Zn on various carbides. The sessile drop technique was employed to determine if they were suitable candidates for pressureless infiltration. The carbides investigated were TaC, WC, B₄C, and SiC. It was determined that both alloys had contact angles of less than 70⁰ on TaC, WC, and B4C, which is one requirement for pressureless infiltration. However, both alloys reacted with B₄C to …

Wrinkling Of Functionally Graded Sandwich Structures Subject To Biaxial And In-Plane Shear Loads, Harold Costa

Masters Theses

"Benefits of a functionally graded core increasing wrinkling stability of sandwich panels have been demonstrated in a recent paper [1] where a several-fold increase in the wrinkling stress was observed, without a significant weight penalty, using a stiffer core adjacent to the facings. In the present paper wrinkling is analyzed in case where the facings are subject to biaxial compression and/or in-plane shear loading and the core is arbitrary graded through-the-thickness. Two issues addressed are the effect of biaxial or in-plane shear loads on wrinkling stability of panels with both graded and ungraded core and the verification that functional grading …

Ti-Fe Intermetallics Analysis And Control In Joining Titanium Alloy And Stainless Steel By Laser Metal Deposition, Wei Li

Masters Theses

"Direct fusion joining titanium alloy and stainless steel can cause brittle Ti-Fe intermetallics which compromise the mechanical properties of diffusion bonds between titanium alloys and stainless steel. Therefore, filler metals are required as transition layers. In this research, stainless steel metallic powder was directly deposited on the titanium alloy substrate by laser beam, the Ti-Fe intermetallic phases formed in this process were investigated through analyzing fracture morphology, phase identification, and Vickers Hardness Number (VHN). After that, Laser Metal Deposition (LMD) was applied to explore a new fabricating process to join Ti6Al4V and SS316. A transition composition route was introducedTi6Al4V → …

3d Bioprinting A Pcl/13-93b3 Glass Composite And Its Potential Use As A Bio-Ink, Caroline Blair Murphy

Masters Theses

"A major limitation of using synthetic scaffolds in tissue engineering is little growth of incorporated cells in the interior of the scaffold, resulting in insufficient angiogenesis in the scaffold interior. Recently, cells have been 3D bioprinted concurrently with biomaterials to produce a cellularized, bioactive, angiogenic 3D environment. This thesis describes a novel solvent-extrusion method for printing polycaprolactone (PCL)/bioactive borate glass composite as a biomaterial for a cell-laden scaffold.

Bioactive borate glass was added to a mixture of PCL and organic solvent to make an extrudable paste, creating scaffolds measuring 10×10×1 mm³ in overall dimensions with pore sizes ranging from …