Engineering Commons^™

Advancing The Cyberinfrastructure For Integrated Water Resources Modeling, Caleb A. Buahin

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Like other scientists, hydrologists encode mathematical formulations that simulate various hydrologic processes as computer programs so that problems with water resource management that would otherwise be manually intractable can be solved efficiently. These computer models are typically developed to answer specific questions within a specific study domain. For example, one computer model may be developed to solve for magnitudes of water flow and water levels in an aquifer while another may be developed to solve for magnitudes of water flow through a water distribution network of pipes and reservoirs. Interactions between different processes are often ignored or are approximated using …

Investigation And Engineering Of Polyketide Biosynthetic Pathways, Lei Sun

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This research is focused on investigation and engineering of natural product biosynthetic pathways for efficient production of pharmaceutically important molecules or generation of new bioactive molecules for drug development.

Natural products are an important source of therapeutics, such as chromomycin (anti-cancer), emodin (anti-inflammatory and anti-tumor) and sprolaxine (anti-Helicobacter pylori). Metabolic engineering of natural product biosynthetic pathways shows its promise for creating and producing valuable compounds with chemical diversity for drug discovery. One goal of this research is to create highly efficient strains to biosynthesize valuable natural products. The engineered Streptomyces roseiscleroticus strain constructed in this work showed higher …

A Selective-Discrete Particle Swarm Optimization Algorithm For Solving A Class Of Orienteering Problems, Aldy Gunawan, Vincent F. Yu, Perwira Redi, Parida Jewpanya, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

This study addresses a class of NP-hard problem called the Orienteering Problem (OP), which belongs to a well-known class of vehicle routing problems. In the OP, a set of nodes that associated with a location and a score is given. The time required to travel between each pair of nodes is known in advance. The total travel time is limited by a predetermined time budget. The objective is to select a subset of nodes to be visited that maximizes the total collected score within a path. The Team OP (TOP) is an extension of OP that incorporates multiple paths. Another …

Vkse-Mo: Verifiable Keyword Search Over Encrypted Data In Multi-Owner Settings, Yinbin Miao, Jianfeng Ma, Ximeng Liu, Junwei Zhang, Zhiquan Liu

Research Collection School Of Computing and Information Systems

Searchable encryption (SE) techniques allow cloud clients to easily store data and search encrypted data in a privacy-preserving manner, where most of SE schemes treat the cloud server as honest-but-curious. However, in practice, the cloud server is a semi-honest-but-curious third-party, which only executes a fraction of search operations and returns a fraction of false search results to save its computational and bandwidth resources. Thus, it is important to provide a results verification method to guarantee the correctness of the search results. Existing SE schemes allow multiple data owners to upload different records to the cloud server, but these schemes have …

Graphmp: An Efficient Semi-External-Memory Big Graph Processing System On A Single Machine, Peng Sun, Yonggang Wen, Nguyen Binh Duong Ta, Xiaokui Xiao

Research Collection School Of Computing and Information Systems

Recent studies showed that single-machine graph processing systems can be as highly competitive as clusterbased approaches on large-scale problems. While several outof-core graph processing systems and computation models have been proposed, the high disk I/O overhead could significantly reduce performance in many practical cases. In this paper, we propose GraphMP to tackle big graph analytics on a single machine. GraphMP achieves low disk I/O overhead with three techniques. First, we design a vertex-centric sliding window (VSW) computation model to avoid reading and writing vertices on disk. Second, we propose a selective scheduling method to skip loading and processing unnecessary edge …

A Multiagent-Based Approach For Vehicle Routing By Considering Both Arriving On Time And Total Travel Time, Zhiguang Cao, Hongliang Guo, Jie Zhang

Research Collection School Of Computing and Information Systems

Arriving on time and total travel time are two important properties for vehicle routing. Existing route guidance approaches always consider them independently, because they may conflict with each other. In this article, we develop a semi-decentralized multiagent-based vehicle routing approach where vehicle agents follow the local route guidance by infrastructure agents at each intersection, and infrastructure agents perform the route guidance by solving a route assignment problem. It integrates the two properties by expressing them as two objective terms of the route assignment problem. Regarding arriving on time, it is formulated based on the probability tail model, which aims to …

Finding The 'Faster' Path In Vehicle Routing, Jing Guo, Yaoxin Wu, Xuexi Zhang, Le Zhang, Wei Chen, Zhiguang Cao, Hongliang Guo

Research Collection School Of Computing and Information Systems

In this study, the authors improve the faster criterion in vehicle routing by extending the bi-delta distribution to the bi-normal distribution, which is a reasonable assumption for travel time on each road link. Based on this assumption, theoretical models are built for an arbitrary path and subsequently adopted to evaluate two candidate paths through probabilistic comparison. Experimental results demonstrate the bi-normal behaviour of link travel time in practice, and verify the faster criterion's superiority in determining the optimal path either on an artificial network with bi-normal distribution modelling link travel time or on a real road network with real traffic …

Antibacterial Activity Of Zno Nanoparticles On Silica Thin Film For Wastewater Treatment, S Chanrawangyot, S Rattanachan, A Watcharenwong, T Fangsuwannarak

Journal of Metals, Materials and Minerals

Zinc Oxide nanoparticles on silica matrix thin films were prepared by the Sol-gel method and dip coating on ceramic tiles. In this study, EC (Ethyl cellulose) and TP (alpha-terpineol) used as a binder and a solvent in Sol-gel method, respectively, were studied on the characteristics of thin films. The thin films were dried and calcined at the temperature of 500, 600˚C soaking 30 minutes with the heating rate of 1˚C/minutes. The result of Glancing X-Ray Diffraction showed that thin films were ZnO phase on the amorphous phase of silica matrix. Scanning electron microscope showed the ZnO nanoparticles dispersed on thin …

Physical And Optical Properties Of 20cao-(80-X)B2o3-Xzno Glass System, N Jearnkulprasert, O Chaemlek, N Wantana, J Kaewkhao

Journal of Metals, Materials and Minerals

The 20CaO-(80-x)B2O3-xZnO glasses were prepared by melt quenching technique (where x=0, 5, 15 and 20 mol%) in order to study in the physical and optical properties. These glass compositions were heated to 1200 ºC for 3 hours and annealed at 500ºC for 3 hours. Clear glass samples were obtained from these compositions. The density, molar volume, refractive index, optical spectra (in the wavelength of 190-1100 nm), optical band gap, optical basicity and polarizability of glass samples have been investigated in this work.

Kinetic Study Of Chitosan-Alginate Biopolymeric Nanoparticles For The Controlled Release Of Curcumin Diethyl Disuccinate, S Bhunchu, P Rojsitthisak, P Rojsitthisak

Journal of Metals, Materials and Minerals

The aim of this study was to investigate the release profile, and evaluate the best fitted kinetic model and mechanism, of curcumin diethyl disuccinate (CDD) from chitosan-alginate biopolymeric nanoparticles (CANPs) in simulated gastrointestinal fluids (without enzymes) and simulated body fluid. The CDD-loaded CANPs (CDD-CANPs) were prepared by oil-in-water emulsification and ionotropic gelation under the previously reported optimal condition (3 mg/mL of CDD, 4.05% (w/v) of TweenTM 80 and a chitosan:alginate mass ratio of 0.05:1), which resulted in CDD-CANPs with a favorable particle size (327±14 nm), zeta potential (-27.3±0.2 mV), encapsulation efficiency (51.2±2.2%) and loading capacity (11.2±0.8%). The in vitro release …

Utilization Of Aluminium Dross As A Main Raw Material For Synthesis Of Geopolymer, P Puksisuwan, P Laoratanakul, B Cherdhirunkorn

Journal of Metals, Materials and Minerals

Aluminium dross contains both small particles and large agglomerates, where the recyclable part is the large agglomerates with high aluminium metal content. The residual Al dross is unrecyclable small particles with very low aluminium metal content. In this research, the residual Al dross from the aluminium recycle industry and the bagasse ash from a biomass power plant were used as main raw materials for geopolymer fabrication with alkaline solutions (Na2SiO3 and NaOH) using in the typical geopolymerization process. After mixing with alkaline solutions, the mixtures were uniaxially pressed into a cylinder die. The samples were cured for 3, 7, 14 …

Radiative Contour Mapping Using Uas Swarm, Zachary Cook

UNLV Theses, Dissertations, Professional Papers, and Capstones

The work is related to the simulation and design of small and medium scale unmanned aerial system (UAS), and its implementation for radiation measurement and contour mapping with onboard radiation sensors. The compact high-resolution CZT sensors were integrated to UAS platforms as the plug-and-play components using Robot Operation System. The onboard data analysis provides time and position-stamped intensities of gamma-ray peaks for each sensor that are used as the input data for the swarm flight control algorithm. In this work, a UAS swarm is implemented for radiation measurement and contour mapping. The swarm of UAS has advantages over a single …

Development Of A Multiphase Photon Monte Carlo Method For Spray Combustion And Its Application In High-Pressure Conditions, Somesh Roy, Jian Cai, Michael F. Modest

Mechanical Engineering Faculty Research and Publications

In this work the development of a multiphase photon Monte Carlo (PMC) method with a focus on resolving radiative heat transfer in combustion simulations is presented. The multiphase PMC solver can account for description of participating media in both Lagrangian and Eulerian frameworks. The solver is validated against exact solutions in several one-dimensional configurations. The developed solver is then applied to Diesel spray combustions, where liquid spray droplets are assumed to be cold, nonemitting, large, and isotropically scattering. Several formulations for radiative properties of the Diesel spray are first explored. The PMC solver has then been coupled with the multiphase …

Development Of A Rotordynamic Signal Processing Matlab Interface And A Two-Disk Rotor Model, David L. Baker

Master's Theses

Using MATLAB and a National Instruments data acquisition card, a signal processing program meant to monitor the behavior of rotordynamic systems in real-time was developed and tested. By using traditional analysis methods in this field of engineering, commonly desired data representations such as bode, polar, orbit, full spectrum plots were able to be produced to a very high accuracy. Additional capabilities offered by this application are slow roll compensation, synchronous and sub-synchronous filtering, and true three dimensional plotting. The verification of this program was done by comparing the results to the ones acquired with Bently Nevada’s “Automated Diagnostics for Rotating …

Genealogy Extraction And Tree Generation From Free Form Text, Timothy Sui-Tim Chu

Master's Theses

Genealogical records play a crucial role in helping people to discover their lineage and to understand where they come from. They provide a way for people to celebrate their heritage and to possibly reconnect with family they had never considered. However, genealogical records are hard to come by for ordinary people since their information is not always well established in known databases. There often is free form text that describes a person’s life, but this must be manually read in order to extract the relevant genealogical information. In addition, multiple texts may have to be read in order to create …

Sd-Mcan: A Software-Defined Solution For Ip Mobility In Campus Area Networks, Adam Chase Calabrigo

Master's Theses

Campus Area Networks (CANs) are a subset of enterprise networks, comprised of a network core connecting multiple Local Area Networks (LANs) across a college campus. Traditionally, hosts connect to the CAN via a single point of attachment; however, the past decade has seen the employment of mobile computing rise dramatically. Mobile devices must obtain new Internet Protocol (IP) addresses at each LAN as they migrate, wasting address space and disrupting host services. To prevent these issues, modern CANs should support IP mobility: allowing devices to keep a single IP address as they migrate between LANs with low-latency handoffs. Traditional approaches …

Smart Dc/Dc Wall Plug Design For The Dc House Project, Richard Sinclair Liu

Master's Theses

The present day duplex wall receptacle in the United States provides 120Vrms AC at 60Hz, which comes from a standard set for AC loads by the National Electrical Manufacturers Association. With a DC system, such as what is used in the DC House project currently being developed at Cal Poly, providing DC power to DC loads presents a technical challenge due to the different required DC operating voltages of the loads. This thesis entails the design and construction of a Smart DC/DC Wall Plug, which can automatically adjust its output voltage to match any required DC load voltages. In the …

Computer-Aided Diagnoses (Cad) System: An Artificial Neural Network Approach To Mri Analysis And Diagnosis Of Alzheimer's Disease (Ad), Berizohar Padilla Cerezo

Master's Theses

Alzheimer’s disease (AD) is a chronic and progressive, irreversible syndrome that deteriorates the cognitive functions. Official death certificates of 2013 reported 84,767 deaths from Alzheimer’s disease, making it the 6th leading cause of death in the United States. The rate of AD is estimated to double by 2050. The neurodegeneration of AD occurs decades before symptoms of dementia are evident. Therefore, having an efficient methodology for the early and proper diagnosis can lead to more effective treatments.

Neuroimaging techniques such as magnetic resonance imaging (MRI) can detect changes in the brain of living subjects. Moreover, medical imaging techniques are the …

A Comparison Study Of Composite Laminated Plates With Holes Under Tension, Joun S. Kim

Master's Theses

A Comparison Study of Composite Laminated Plates with Holes under Tension

A study was conducted to quantify the accuracy of numerical approximations to deem sufficiency in validating structural composite design, thus minimizing, or even eliminating the need for experimental test. Error values for stress and strain were compared between Finite Element Analysis (FEA) and analytical (Classical Laminated Plate Theory), and FEA and experimental tensile test for two composite plate designs under tension: a cross-ply composite plate design of [(0/90)4]s, and a quasi-isotropic layup design of [02/+45/-45/902]s, each with a single, centered hole of 1/8” diameter, and 1/4" diameter (four sets …

A Comparative Analysis Of Professional Pilot Jobs, Ryan Snoeyink

Honors Theses

Professional Pilots fly aircraft for a living. Just like there are many different types of aircraft, there are many different types of professional pilot jobs. While it is an impossible task to describe every single job a professional pilot could have, there are four "groups" in which most jobs can be classified. These groups are Part 121 Scheduled Airline Service, Part 135 On-demand Charter, Part 91 Corporate/Private, and Part 61/141/142 Flight Instruction. The goal of this thesis is to examine the differences between these four groups; and by doing so, aid in the education and career decision making of those …

Aerodynamic Analysis Of Low Speed Wing Design Using Taguchi L9 Orthogonal Array, Kenneth Witcher, Ian Mcandrew, Elena Vishnevskaya

Publications

The study of aerodynamics has been preoccupied with understanding flight at increasing speeds and ultimately supersonic. Today, this pursuit has advanced the science for both Hypersonic and Transonic flight to near Mach 1 supporting economical commercial flight operations. This research presents the data from a Taguchi array on low speed with twin wing designs to establish the design parameters for their use in low speed and high altitude. Also presented is how aerodynamic advantages can be achieved through understanding the interactions of parameters and their use. This is compared to operational effectiveness when applied to remotely piloted aircraft that are …

Cloudskulk: Design Of A Nested Virtual Machine Based Rootkit-In-The-Middle Attack, Joseph Anthony Connelly

Boise State University Theses and Dissertations

Virtualized cloud computing services are a crucial facet in the software industry today, with clear evidence of its usage quickly accelerating. Market research forecasts an increase in cloud workloads by more than triple, 3.3-fold, from 2014 to 2019 [33]. Integrating system security is then an intrinsic concern of cloud platform system administrators that with the growth of cloud usage, is becoming increasingly relevant. People working in the cloud demand security more than ever. In this paper, we take an offensive, malicious approach at targeting such cloud environments as we hope both cloud platform system administrators and software developers of these …

Identifying Restaurants Proposing Novel Kinds Of Cuisines: Using Yelp Reviews, Haritha Akella

Boise State University Theses and Dissertations

These days with TV-shows and starred chefs, new kinds of cuisines appear in the market. The main cuisines like French, Italian, Japanese, Chinese and Indian are always appreciated but they are no longer the most popular. The new trend is the fusion cuisine, which is obtained by combining different main cuisines. The opening of a new restaurant proposing new kinds of cuisine produces a lot of excitement in people. They feel the need to try it and be part of this new culture. Yelp is a platform which publishes crowd sourced reviews about different businesses, in particular, restaurants. For some …

Development Of In-Vitro And In-Vivo Devices To Study The Mechanobiology Of Ligament Healing, John Bayard Everingham

Boise State University Theses and Dissertations

Ligament injuries are the most common sports injury in the United States. The current clinical practice for treating ligament injuries leaves many patients with significant pain and joint laxity for years following the initial injury. Controlled mechanical stimulation of the tissue after injury is necessary for robust healing, but the optimal mechanical environment for ligament healing is not fully understood. Alternative therapies, such as instrument assisted soft tissue mobilization (IASTM), offer a form of mechanical stimulation that is non-invasive and has shown promising clinical outcomes but the optimal dosage for IASTM treatments is unknown. The objective of this study was …

Thermodynamics And Kinetics Of Dna Origami Cross-Tile Array Formation, Brett Michael Ward

Boise State University Theses and Dissertations

As the cost to continue scaling photolithography to pattern smaller semiconducting devices increases exponentially, new materials and fabrication approaches are being sought to extend and enhance current capabilities. DNA nanostructures have been identified as a promising material for patterning nanoscale devices, and several studies have demonstrated the ability to program DNA nanostructures to self-assemble into large scale arrays. These DNA arrays can be designed to create the patterns necessary for fabricating semiconductor device features. However, these structures are far from ideal and contain a number of defects that limit the adoption of this approach for manufacturing. In order to create …

Additive Manufacturing Techniques And Their Biomedical Applications, Yujing Liu, Wei Wang, Laichang Zhang

Research outputs 2014 to 2021

Additive manufacturing (AM), also known as three-dimensional (3D) printing, is gaining increasing attention in medical fields, especially in dental and implant areas. Because AM technologies have many advantages in comparison with traditional technologies, such as the ability to manufacture patient-specific complex components, high material utilization, support of tissue growth, and a unique customized service for individual patients, AM is considered to have a large potential market in medical fields. This brief review presents the recent progress of 3D-printed ­biomedical materials for bone applications, mainly for metallic materials, including multifunctional alloys with high strength and low Young’s modulus, shape memory alloys, …

Synthesis Of Magnetic Carbon Supported Manganese Catalysts For Phenol Oxidation By Activation Of Peroxymonosulfate, Yuxian Wang, Yongbing Xie, Chunmao Chen, Xiaoguang Duan, Hongqi Sun, Shaobin Wang

Research outputs 2014 to 2021

Magnetic core/shell nanospheres (MCS) were synthesized by a novel and facile one-step hydrothermal method. Supported manganese oxide nanoparticles (Fe₃O₄/C/Mn) were obtained from various methods (including redox, hydrothermal and impregnation) using MCS as the support material and potassium permanganate as the precursor of manganese oxide. The Mn/MCS catalysts were characterized by a variety of characterization techniques and the catalytic performances of Fe₃O₄/C/Mn nanoparticles were tested in activation of peroxymonosulfate to produce reactive radicals for phenol degradation in aqueous solutions. It was found that Fe₃O₄/C/Mn catalysts can be well dispersed …

Fifth Graders’ Creativity In Inventions With And Without Creative Articulation Instruction, Darcie K. Kress, Audrey C. Rule

Journal of STEM Arts, Crafts, and Constructions

Industry and authors of 21^st Century Skill Frameworks are calling for student proficiency in creativity, problem-solving, innovation, collaboration, and communication skills. This project involved 13 fifth grade gifted students in inventing products for a specified audience with a set of given materials, time limit, and topic constraints. The complex, challenging project supports Next Generation Science Engineering Process Standard 3-5-ETS1-2 and applies concepts of plant and animal adaptations. The study had a counterbalanced, repeated measures design in which student made an initial invention during the pretest, then participated in two trials with one in the control condition and the other …

Challenging Elementary Learners With Programmable Robots During Free Play And Direct Instruction, Kimberly S. Mccoy-Parker, Lindsey N. Paull, Audrey C. Rule, Sarah E. Montgomery

Journal of STEM Arts, Crafts, and Constructions

Computer programming skills are important to many current careers; teaching robot coding to elementary students can start a positive foundation for technological careers, develop problem-solving skills, and growth mindsets. This study, through a repeated measures design involving students in two classrooms at two widelyseparated grade levels (first graders aged 6-7 years and fifth graders aged 10-11 years), determined if allowing students to challenge themselves with coding exercises in the experimental condition resulted in greater learning and more positive attitudes than a more structured set of exercises provided by the teacher in the control condition. Background instruction in coding and using …

Reading Nonfiction Science Literature With And Without Arts Integration Activities, Elizabeth Mccartney, Catherine Mochal, Victoria Boyd, Audrey C. Rule, Sarah E. Montgomery

Journal of STEM Arts, Crafts, and Constructions

This study explores the integration of the arts into the teaching of science nonfiction texts during literacy instruction. Sixty-one elementary students (15 second graders, 25 third graders, and 21 fifth graders) attending schools of differing socio-economic levels participated in this study. The study examined the effects of artsintegration on student content knowledge, engagement level, and attitudes toward learning regarding science nonfiction texts. Throughout the eight-week study, students experienced both the traditional no-arts control condition and the experimental arts-integration condition in two-week segments for different science topics. Both conditions employed literacy strategies to teach comprehension of science nonfiction texts. The resulting …