Engineering Commons^™

An Application Of M-Matrices To Preserve Bounded Positive Solutions To The Evolution Equations Of Biofilm Models, Richard S. Landry Jr.

University of New Orleans Theses and Dissertations

In this work, we design a linear, two step implicit finite difference method to approximate the solutions of a biological system that describes the interaction between a microbial colony and a surrounding substrate. Three separate models are analyzed, all of which can be described as systems of partial differential equations (PDE)s with nonlinear diffusion and reaction, where the biological colony grows and decays based on the substrate bioavailability. The systems under investigation are all complex models describing the dynamics of biological films. In view of the difficulties to calculate analytical solutions of the models, we design here a numerical technique …

Parameter Estimation Technique For Models In Pss/E Using Real-Time Data And Automation, Malavika Vasudevan Menon

University of New Orleans Theses and Dissertations

The purpose of this thesis is to use automation to create appropriate models in PSS/E with the data from Hardware-in-Loop real-time simulations. With the increase in technology of power electronics, the use of High Voltage Direct Current Technology and Flexible Alternating Current Transmission System devices in the electrical power system have increased tremendously. Static Var Compensators are widely used and it is important to have accurate and reliable models for studies relating to power systems planning and interaction. An automation method is proposed to find the parameters of an SVC model in PSS/E with the data from the Hardware-in- loop …

Underwater Acoustic Signal Analysis Toolkit, Kirk Bienvenu Jr

University of New Orleans Theses and Dissertations

This project started early in the summer of 2016 when it became evident there was a need for an effective and efficient signal analysis toolkit for the Littoral Acoustic Demonstration Center Gulf Ecological Monitoring and Modeling (LADC-GEMM) Research Consortium. LADC-GEMM collected underwater acoustic data in the northern Gulf of Mexico during the summer of 2015 using Environmental Acoustic Recording Systems (EARS) buoys. Much of the visualization of data was handled through short scripts and executed through terminal commands, each time requiring the data to be loaded into memory and parameters to be fed through arguments. The vision was to develop …

Investigation Of 2195 And 2219 Post Weld Heat Treatments For Additive Friction Stir Lap Welds, Matthew Champagne

University of New Orleans Theses and Dissertations

To evaluate potential uses for friction stir welding in additive manufacturing, two separate parts were fabricated, one of 2195-T84 and the other 2219-T87, utilizing fixed pin techniques and additive lap welds. The parts were cut into samples, artificially aged and subjected to Rockwell hardness (HRB), Vickers hardness, micrographic photography, and metallographic imaging on both pre- and post- heat treatment. Additionally, tensile testing was performed on the heat-treated samples. A comparisons of test results showed a minimal increase in the yield strength of the 2195-T84 samples compared to as-welded tensile results obtained from a previous project. The ultimate tensile strength was …

Agenda For The Fifth Meeting Of The Forum On Soil Dynamics, Shamsher Prakash

Forum for Promotion of Soil Dynamics in India

No abstract provided.

Membership Of Forum For Promotion Of Soil Dynamics In India, Shamsher Prakash

Forum for Promotion of Soil Dynamics in India

No abstract provided.

Minutes Of The Fifth Meeting Of The Forum For Promotion Of Soil Dynamics In India, Shamsher Prakash

Forum for Promotion of Soil Dynamics in India

No abstract provided.

One-Way Coupled Hydroelastic Analysis Of Aluminum Wedge Under Slamming, Mallikarjun Kalluru

University of New Orleans Theses and Dissertations

The concept of using aluminum as the primary construction material for high speed ships and the hydroelastic behavior of the structure is widely gaining importance as a significant research topic in naval architecture. Aluminum is lighter than steel and hence can be predominantly used in high speed crafts which experiences significant slamming. This thesis work is focused on wedge shaped models. Free fall wedge impact is studied and a FORTRAN 90 computer program is developed to estimate the structural response of the wedge experiencing slamming by the use of matrix methods, finite element techniques and Newmark-Beta numerical time integration methods. …

Synthetic Jet Actuator-Based Aircraft Tracking Using A Continuous Robust Nonlinear Control Strategy, N. Ramos-Pedroza, W. Mackunis, M. Reyhanoglu

Publications

A robust nonlinear control law that achieves trajectory tracking control for unmanned aerial vehicles (UAVs) equipped with synthetic jet actuators (SJAs) is presented in this paper. A key challenge in the control design is that the dynamic characteristics of SJAs are nonlinear and contain parametric uncertainty. The challenge resulting from the uncertain SJA actuator parameters is mitigated via innovative algebraic manipulation in the tracking error system derivation along with a robust nonlinear control law employing constant SJA parameter estimates. A key contribution of the paper is a rigorous analysis of the range of SJA actuator parameter uncertainty within which asymptotic …

Subject-Independent Emotion Recognition Based On Physiological Signals: A Three-Stage Decision Method, Jing Chen, Bin Hu, Yue Wang, Philip Moore, Yongqiang Dai, Lei Feng, Zhijie Ding

Biomedical Engineering Faculty Publications

Background: Collaboration between humans and computers has become pervasive and ubiquitous, however current computer systems are limited in that they fail to address the emotional component. An accurate understanding of human emotions is necessary for these computers to trigger proper feedback. Among multiple emotional channels, physiological signals are synchronous with emotional responses; therefore, analyzing physiological changes is a recognized way to estimate human emotions. In this paper, a three-stage decision method is proposed to recognize four emotions based on physiological signals in the multi-subject context. Emotion detection is achieved by using a stage-divided strategy in which each stage deals with …

Ls301 Fluorescence-Guided Photodynamic Therapy Of Brain Cancer Using Ppix Photosensitizer, Haini Zhang

McKelvey School of Engineering Theses & Dissertations

Incomplete brain tumor removal always causes neurologic deficit, disease recurrence and high mortality. Protoporphyrin IX (PpIX) accumulated in glioma cells with exogenous 5-aminolevulinic acid (5-ALA) serves as contrast agent for fluorescence-guided surgery and as well as acts as a photosensitizer for photodynamic therapy (PDT). However, the accurate tumor delineation using PpIX is limited by autofluorescence and superficial penetration depth. LS301 is a tumor-targeted near-infrared (NIR) contrast agent developed in our lab which allows deeper tumor imaging and avoids autofluorescence. My project aims to investigate whether LS301 can improve PpIX mediated PDT and tumor removal surgery. We have demonstrated co-localization of …

Three-Dimensional Nanomaterials For Supercapacitor Applications: From Metal Oxides To Metal Phosphides, Zhi Zheng

University of New Orleans Theses and Dissertations

Over the past few years, energy storage devices have received tremendous interest due to the increasing demand for sustainable and renewable energy in modern society. Supercapacitors are considered as one of the most promising energy storage devices because of their high power density and long cycle life. However, low energy density remains as the main shortcoming for supercapacitors. The overall performance of supercapacitors is predominantly determined by the characteristics of the electrodes. Specifically, constructing nanostructured electrode material has been proven as an efficient way to improve the performance by providing large surface area and short ionic and electronic diffusion paths. …

Design, Manufacture, And Structural Dynamic Analysis Of A Biomimetic Insect-Sized Wing For Micro Air Vehicles, Jose Enrique Rubio

University of New Orleans Theses and Dissertations

The exceptional flying characteristics of airborne insects motivates the design of biomimetic wing structures that can exhibit a similar structural dynamic behavior. For this purpose, this investigation describes a method for both manufacturing a biomimetic insect-sized wing using the photolithography technique and analyzing its structural dynamic response. The geometry of a crane fly forewing (family Tipulidae) is acquired using a micro-computed tomography scanner. A computer-aided design model is generated from the measurements of the reconstructed scanned model of the insect wing to design the photomasks of the membrane and the venation network required for the photolithography procedure. A composite …

Locating Unmanned Aerial Vehicles (Uavs), Ali Ghubaish

McKelvey School of Engineering Theses & Dissertations

Despite the popularity and usefulness of Unmanned Aerial Vehicles (UAVs) or drones, they are not allowed to fly in some areas without prior permission from the Federal Aviation Administration (FAA). However, many incidents of UAVs breaching such restrictions have been reported. A UAV location system can help the law enforcement to be alerted and can prevent UAVs breaching any restricted area without permission. This master thesis proposes a UAV location system where each UAV has a unique identification tag. The method consists of two stages: distance and location estimation. We compared distance estimation using three different methods: Time of Arrival …

The Interaction Between Encapsulated Gd2o3 Particles And Polymeric Matrix: The Mechanism Of Fracture And X-Ray Attenuation Properties, Ly B. T. La, Christopher Leatherday, Peng Qin, Yee-Kwong Leong, Kevin Hayward, Bin Jiang, Lai-Chang Zhang

Research outputs 2014 to 2021

This work sheds light on the relationship between the quantities of synthesized core shell Gd₂O₃ added to epoxy matrix and the mechanical and X-ray attenuation properties of particulate epoxy composite. Then, an optimal geometric design of non-lead based X-ray protective material with light weight per volume unit is prepared. A plateau with 28–30 % increments in the value of fracture toughness (K_IC ) is observed with a specific addition of 0.08 – 0.1 volume fraction (φ_S) of Gd₂O₃ particles in pure epoxy. The same quantity of particles also optimally raises …

Application Of Pca To Cardiac Optical Mapping, Louis Woodhams

McKelvey School of Engineering Theses & Dissertations

Structural remodeling of the heart due to pathologies such as hypertension and myocardial infarction leads to the appearance of myofibroblasts, a phenotype largely absent in physiologic myocardium. While myofibroblasts are responsible for wound healing and structural repair of damaged myocardium, they are thought to have deleterious effects on electrical and mechanical properties of the heart. Understanding these effects is critical to developing effective treatments, and has motivated the development of a series of in vitro engineered heart tissues and cardiomyocyte-myofibroblast co-cultures whose mechanical and electrophysiological function can be deduced from video analysis. Electrophysiological properties are evident from changes in intensity …

Femtosecond Laser Micromachining Of Low-Temperature Co-Fired Ceramic And Glass Fiber Reinforced Polymer Printed Circuit Boards Materials, Raif Farkouh

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Low-temperature co-fired ceramic (LTCC), and glass fiber reinforced polymer (GFRP) printed circuit boards (PCBs) are two materials used for the packaging of electronics. The excellent mechanical and electrical properties of LTCC, combined with the ability to embed passive components offer superior radio frequency (RF) performance and device miniaturization for high-frequency applications. Due to its unique properties, LTCC provides superior performance in applications as diverse as military radar, imaging systems, advanced automotive sensing, telecommunications, and satellites. The use of LTCC in these applications has created a demand for the micromachining of holes, channels, and cavities with specific geometries and structures. Likewise, …

Harmonics Elimination In Three Phase Cascade H-Bridge Multilevel Inverter Using Virtual Stage Pwm, Amro Quedan

Durham School of Architectural Engineering and Construction: Dissertations, Thesis, and Student Research

The multilevel inverters are one of the great solutions that are proposed to satisfy the demand for high-power application and the significant integration of renewable energy. The conversion process from DC to AC must be done at high efficiency to decrease the energy loss and to ensure the electric grid power quality. The Total Harmonic Distortion (THD) is the most important feature that indicates the efficiency of the conversion process. In this research, due to the advantages of the cascade H-bridge inverter over other topologies, it has been used with the virtual stage PWM technique to investigate two different methods …

Prediction Of Average Annual Surface Temperature For Both Flexible And Rigid Pavements, Karthikeyan Loganathan, Mena I. Souliman

Civil Engineering Faculty Publications and Presentations

The surface temperature of pavements is a critical attribute during pavement design. Surface temperature must be measured at locations of interest based on time-consuming field tests. The key idea of this study is to develop a temperature profile model to predict the surface temperature of flexible and rigid pavements based on weather parameters. Determination of surface temperature with traditional techniques and sensors are replaced by a newly developed method. The method includes the development of a regression model to predict the average annual surface temperature based on weather parameters such as ambient air temperature, relative humidity, wind speed, and precipitation. …

Highly Vented Truss Wall Honeycomb Structures, David J. Sypeck

Publications

A vented honeycomb structure with a plurality of honey­comb cells arranged in a hierarchical order and having a plurality of truss walls, each truss wall including a plurality of members. The vented honeycomb structure is fabricated by joining a plurality of sheets of trusses using any one of an expansion, a corrugation, and a slotting process. Fabri­cation can also occur by deposition, casting, additive, extru­sion, or aligning and joining methods. The honeycomb cells, truss walls, truss wall openings, and truss wall members can be functionally graded.

Biomechanical Tolerance Of Whole Lumbar Spines In Straightened Posture Subjected To Axial Acceleration, Brian D. Stemper, Sajal Chirvi, Ninh Doan, Jamie L. Baisden, Dennis J. Maiman, William H. Curry, Narayan Yoganandan, Frank A. Pintar, Glenn Paskoff, Barry S. Shender

Biomedical Engineering Faculty Research and Publications

Quantification of biomechanical tolerance is necessary for injury prediction and protection of vehicular occupants. This study experimentally quantified lumbar spine axial tolerance during accelerative environments simulating a variety of military and civilian scenarios. Intact human lumbar spines (T12‐L5) were dynamically loaded using a custom‐built drop tower. Twenty‐three specimens were tested at sub‐failure and failure levels consisting of peak axial forces between 2.6 and 7.9 kN and corresponding peak accelerations between 7 and 57 g. Military aircraft ejection and helicopter crashes fall within these high axial acceleration ranges. Testing was stopped following injury detection. Both peak force and acceleration were significant …

Optimizing Filter-Probe Diffusion Weighting In The Rat Spinal Cord For Human Translation, Matthew D. Budde, Nathan P. Skinner, L. Tugan Muftuler, Brian D. Schmit, Shekar N. Kurpad

Biomedical Engineering Faculty Research and Publications

No abstract provided.

Algorithm For Computational Imaging On A Real-Time Hardware, Manish Bhattarai

Electrical and Computer Engineering ETDs

DRAMATIC advances in the field of computational and medical imaging over the past decades have enabled many critical applications such as night vision, medical diagnosis, quality control, and remote sensing. The increasing demand for image quality and its fidelity requires an increase in pixel count and a sophisticated post-processing mechanism to efficiently store, transmit, and analyze this massive data. There is an inherent trade-off between the generation of big data by such imaging systems and efficiency in extraction of useful information within real-time constraints, limiting the efficacy of such sensors in real-time decision-making systems. The traditional imaging system gets burdened …

Highly Vented Truss Wall Honeycomb Structures, David J. Sypeck

Publications

A vented honeycomb structure with a plurality of honey­comb cells arranged in a hierarchical order and having a plurality of truss walls, each truss wall including a plurality of members. The vented honeycomb structure is fabricated by joining a plurality of sheets of trusses using any one of an expansion, a corrugation, and a slotting process. Fabri­cation can also occur by deposition, casting, additive, extru­sion, or aligning and joining methods. The honeycomb cells, truss walls, truss wall openings, and truss wall members can be functionally graded.

Adaption Of Catechol And Reversible Addition-Fragmentation Chain-Transfer (Raft) Chemistries For Water-Based Applications, Olabode Oyeneye

Electronic Thesis and Dissertation Repository

Incorporating the binding chemistry of catechol functionality with RAFT chemistry offers a facile and simplified approach for developing a suite of new 2D and 3D hybrid materials with tailored morphologies. Leveraging both chemistries by synthesizing catechol-end functionalized RAFT agents and catechol-containing monomeric species for RAFT (co)polymerization, this dissertation examined a new series of advanced materials that were designed for water-based applications including model flocculants, thermoresponsive hydrogels, adsorbents and underwater adhesives.

To prepare the RAFT agents, novel trithiocarbonates with several catechol end R groups (as postpolymerization anchors) were synthesized that differ in their carbonyl α-substituents (Dopa-CTAs). These materials were evaluated for …

Displacement Measurement Using A Laser Doppler Vibrometer Mounted On An Unmanned Aerial Vehicles, Piyush Garg

Electrical and Computer Engineering ETDs

The railroad network in the united states is one of the best in the world, handling around 40 percent of all US freight movement. To maintain the serviceability and cost-effective operation of the railway infrastructure, regular monitoring is essential. Bridges are a critical part of the railway infrastructure and their timely maintenance and repair are important. Measuring transverse bridge displacement under train loading can assist to determine the bridge condition. The traditional methods available for transverse displacement measurement include Linear Variable Differential Transducers (LVDT). However, irregular terrain, remote and inaccessible locations, and the height of railroad bridges make implementation of …

The Role Of Catalytic Residue PKA On The Hydrolysis/Transglycosylation Partition In Family 3 Β-Glucosidases, Inacrist Geronimo, Christina M. Payne, Mats Sandgren

Chemical and Materials Engineering Faculty Publications

β-Glucosidases (βgls) primarily catalyze the hydrolysis of the terminal glycosidic bond at the non-reducing end of β-glucosides, although glycosidic bond synthesis (called transglycosylation) can also occur in the presence of another acceptor. In the final reaction step, the glucose product or another substrate competes with water for transfer to the glycosyl-enzyme intermediate. The factors governing the balance between the two pathways are not fully known; however, the involvement of ionizable residues in binding and catalysis suggests that their pK_a may play a role. Through constant pH molecular dynamics simulations of a glycoside hydrolase Family 3 (GH3) βgl, we …

Tiled Time Delay Estimation In Mobile Cloud Computing Environments, Ruairí De Fréin

Conference papers

We present a tiled delay estimation technique in the context of Mobile Cloud Computing (MCC) environments. We examine its accuracy in the presence of multiple sources for (1) sub-sample delays and also (2) in the presence of phase-wrap around. Phase wrap-around is prevalent in MCC because the separation of acoustic sources may be large. We show that tiling a histogram of instantaneous phase estimates can improve delay estimates when phase-wrap around is sig- nificantly present and also when multiple sources are present. We report that error in the delay estimator is generally less than 5% of a sample, when the …

Material State Awareness For Composites Part Ii: Precursor Damage Analysis And Quantification Of Degraded Material Properties Using Quantitative Ultrasonic Image Correlation (Quic), Subir Patra, Sourav Banerjee

Faculty Publications

Material state awareness of composites using conventional Nondestructive Evaluation (NDE) method is limited by finding the size and the locations of the cracks and the delamination in a composite structure. To aid the progressive failure models using the slow growth criteria, the awareness of the precursor damage state and quantification of the degraded material properties is necessary, which is challenging using the current NDE methods. To quantify the material state, a new offline NDE method is reported herein. The new method named Quantitative Ultrasonic Image Correlation (QUIC) is devised, where the concept of microcontinuum mechanics is hybrid with the experimentally …

Ros-Enabled Framework For A Miniature Hexapod As A Mobile Robot Research Platform, Joseph Michael Kloeppel

Electrical and Computer Engineering ETDs

The purpose of this thesis is to investigate and develop a framework for connected six-legged robots which can be used as a Robotic Operating System (ROS) based research platform. The research presented aims to purvey the necessary engineering and scientific steps needed to evolve a consumer-grade connected toy into a fully functioning and highly capable robotic system. Such a platform can be used to simulate and implement novel biologically inspired swarm research. Crawling robots have the advantage of being able to scale terrains which wheeled mobile robots may not and possess many interesting characteristics. The miniROaCH, miniature ROS-enabled and Crawling …