Engineering Commons^™

Sugar Versus Lipid For Sustainable Biofuels, Yaşar Demirel

Yaşar Demirel Publications

Introduction

First‐generation biofuels, namely, ethanol and biodiesel, have led to far reaching impact on the peoples’ life world‐wide.[1] However, they inter-fere with the food supply chain and may not be sustainable although some of the biomass are converted to biofuels after those biomasses have met the human needs. Still, the first‐generation–based biofuels have proved that sugar and lipid platforms can be an answer to energy security and global warming concerns without the need for new infrastructure for feedstock delivery as well as for biomass‐to‐biofuel conversion tech-nologies. At the same time, we are discovering and assessing the long‐term environmental im-plications on …

Co-Gasification Of Coal And Biomass Wastes In An Entrained Flow Gasifier: Modelling, Simulation And Integration Opportunities, Dalia A. Ali Eng, Mamdouh A. Gadalla Prof., Omar Y. Abdelaziz, Christian P. Hulteberg, Fatma H. Ashour Prof.

Chemical Engineering

Gasification processes convert carbon-containing material into syngas through chemical reactions in the presence of gasifying agents such as air, oxygen, and steam. Syngas mixtures produced from such processes consist mainly of carbon monoxide (CO), hydrogen (H2), carbon dioxide (CO2), and methane (CH4); this gas can be directly utilised as a fuel to produce electricity or steam. Besides, it is regarded as a basic feedstock within the petrochemical and conventional refining industries, producing various useful products like methanol, hydrogen, ammonia, and acetic acid. In this work, a rigorous process model is developed to simulate the co-gasification of coal-biomass blends through an …

Influential Women In Flight - Trading Cards, Becca Stegmann

Women in STEM

For this assignment, I created a collection of trading cards that provide biographies and important information about influential minority women in flight. The front of each card has basic demographic information, including each person’s name, birth date, hometown, and what they are known for. The back of each card has a slightly longer explanation of each person, followed by something they are quoted with saying and some key facts about their lives. The cards can be printed out in color and laminated for longevity if desired.

Women In Engineering, Arianna Frisina

Women in STEM

The timeline consists of significant events of women in engineering. The years range from 1939 to 1974 and contains information from Hidden Figures and a peer-reviewed article that was found on JSTOR. The timeline shows the years that the women (Katherine Johnson, Dorothy Vaughan, Christine Darden, and Mary Jackson) began working for NACA. It also includes the time Christine Darden discovered her passion for math, when Kitty O’Brien Joyner sued the University of Virginia, the year of the Civil Rights Act, when Katherine Johnson was able to attend the editorial meetings, and Mary Jackson enrolling in engineering classes. The year …

Self-Sensing Cementitious Materials, Alexander Nicholas Houk

Theses and Dissertations--Civil Engineering

The study of self-sensing cementitious materials is a constantly expanding topic of study in the materials and civil engineering fields and refers to the creation and utilization of cement-based materials (including cement paste, cement mortar, and concrete) that are capable of sensing (i.e. measuring) stress and strain states without the use of embedded or attached sensors. With the inclusion of electrically conductive fillers, cementitious materials can become truly self-sensing. Previous researchers have provided only qualitative studies of self-sensing material stress-electrical response. The overall goal of this research was to modify and apply previously developed predictive models on cylinder compression test …

Laboratory Performance Comparison Of Vortecone Inertial Dust Scrubber To Flooded-Bed Dust Scrubber, Adam J. Levy

Theses and Dissertations--Mining Engineering

Increasing incidence of Black Lung disease in miners since the early 1990s has concerned law makers and the mining industry. New regulations promulgated by MSHA in 2014 lowered the permissible limit of dust exposure of underground workers. The hazards of respirable coal dust have been common knowledge throughout the mining industry since the enactment of the 1969 Federal Coal Mine Health and Safety Act, and many administrative controls have been put in place since its enactment.

The purpose of this thesis is to analyze the performance of a Vortecone scrubber, used in the automotive industry to remove paint overspray from …

Investigating A Sequentially Assembled Mnox/Pt Nanocatalyst As A Potential Anode For Ethylene Glycol Fuel Cells, Ghada El-Nowihy

Chemical Engineering

Aiming at a better electrocatalytic enhancement of ethylene glycol (EG) electrooxidation (EGO) in an alkaline medium for EG fuel cells (EGFCs), a MnOx/Pt anode was developed. A sequential layer-by-layer electrodeposition technique was employed to assemble first platinum nanoparticles (nano-Pt) directly onto the surface of a glassy carbon (GC) electrode then manganese oxide nanoparticles (nano-MnOx) were next immobilized. Field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray spectroscopy (EDS) were employed to evaluate the surface morphology and the bulk composition of the proposed catalyst in addition to the relative ratio of the catalyst’s ingredients. On the other hand, the catalyst …

Field-Observed Angles Of Repose For Stored Grain In The United States, Rumela Bhadra, Mark E. Casada, Sidney A. Thompson, Josephine M. Boac, Ronaldo G. Maghirang, Michael D. Montross, Aaron P. Turner, Samuel G. Mcneill

Biosystems and Agricultural Engineering Faculty Publications

Bulk grain angle of repose (AoR) is a key parameter for inventorying grain, predicting flow characteristics, and designing bins and grain handling systems. The AoR is defined for two cases, piling (dynamic) or emptying (static), and usually varies with grain type. The objective of this study was to measure piling angles of repose for corn, sorghum, barley, soybeans, oats, and hard red winter (HRW) wheat in steel and concrete bins in the United States. Angles were measured in 182 bins and 7 outdoor piles. The piling AoR for corn ranged from 15.7° to 30.2° (median of 20.4° and standard deviation …

Automated Calibration Of Electrochemical Oxygen Sensors For Use In Compost Bedded Pack Barns, John T. Evans, Michael P. Sama, Joseph L. Taraba, George B. Day

Biosystems and Agricultural Engineering Faculty Publications

The objective of this study was to develop an automated calibration process for a galvanic cell type oxygen sensor. The manufacturer recommended a two-point calibration at room temperature; however, testing revealed that the response was not linear when both the temperature and oxygen concentrations varied. Thus, additional points were needed to generate a representative calibration equation and to reduce the sensor prediction interval. The calibration process needed to be capable of automatically recording sensor response (voltage) at an array of temperatures and oxygen concentrations. Calibration gases were used to precisely control the oxygen concentration inside a small manifold, and an …

Application Of Hyperspectral Imaging And Acoustic Emission Techniques For Apple Quality Prediction, Nader Ekramirad, Ahmed Rady, Akinbode A. Adedeji, Reza Alimardani

Biosystems and Agricultural Engineering Faculty Publications

There is a growing demand for developing effective non-destructive quality assessment methods with quick response, high accuracy, and low cost for fresh fruits. In this study, hyperspectral reflectance imaging (400 to 1000 nm) and acoustic emission (AE) tests were applied to ‘GoldRush‘ apples (total number, n = 180) to predict fruit firmness, total soluble solids (TSS), and surface color parameters (L*, a*, b*) during an eight-week storage period. Partial least squares (PLS) regression, least squares support vector machine (LS-SVM), and multivariate linear regression (MLR) methods were used to establish models to predict the quality attributes of the apples. The results …

Ammonia And Carbon Dioxide Emissions Of Three Laying-Hen Housing Systems As Affected By Manure Accumulation Time, Timothy A. Shepherd, Hongwei Xin, John P. Stinn, Morgan D. Hayes, Yang Zhao, Hong Li

Biosystems and Agricultural Engineering Faculty Publications

Laying-hen housing design and management are the most significant factors affecting the generation and release of gaseous ammonia to the atmosphere. Transitioning the hen housing type from traditional high-rise (where manure is stored within the house for about one year) to modern manure-belt style (where manure is removed every 1 to 4 d and placed into long-term storage) has significantly improved in-barn air quality and reduced farm-level ammonia emissions. As a direct result of the advantages, 100% of new construction for U.S. egg production incorporates manure-belt systems that regularly remove manure from the houses. However, manure-belt system designs (e.g., active …

Development And Evaluation Of A Low-Cost Probe-Type Instrument To Measure The Equilibrium Moisture Content Of Grain, Paul R. Armstrong, Samuel G. Mcneill, Naomi Manu, Augustine Bosomtwe, James K. Danso, Enoch Osekre, George Opit

Biosystems and Agricultural Engineering Faculty Publications

Storage of grain in bags is common in Africa, Asia, and many other less developed countries making a bag probing method well-suited for moisture content (MC) measurement. A low-cost meter was developed under a USAID project to reduce post-harvest loss (PHL). The meter, referred to as the PHL meter, measures the MC of maize and other grains based on relative humidity (RH) and temperature (T) measurements obtained by a small digital sensor located in the tip of a tubular probe that can be inserted into bags of grain or other grain bulks. Measurements are used by equilibrium moisture content (EMC) …

Evaluating Ventilation Rates Based On New Heat And Moisture Production Data For Swine Production, Yanxi Lu, Morgan D. Hayes, John P. Stinn, Tami M. Brown-Brandl, Hongwei Xin

Biosystems and Agricultural Engineering Faculty Publications

Heat and moisture production (HMP) rates of animals are used for calculation of ventilation rate (VR) in animal housing. New swine HMP data revealed considerable differences from previously reported data. This project determined new design VRs and evaluated differences from previously recommended VRs. The swine production stages evaluated included gestation, farrowing, nursery, growing, and finishing. The ranges of ambient temperature and ambient relative humidity (RH) evaluated for VR were -25°C to 15°C in 10°C increments and 15% to 75% in 15% increments, respectively. Indoor set points for temperature and RH were, respectively, 15°C, 20°C, 25°C and 60%, 70%, 80% for …

Evaluation Of Flocculation, Sedimentation, And Filtration For Dewatering Of Scenedesmus Algae, Nicholas A. Rhea, Jack Groppo, Czarena Crofcheck

Biosystems and Agricultural Engineering Faculty Publications

Algae can be used as a feedstock for agricultural fertilizers, livestock and poultry feeds, anaerobic digestion, and biofuel production. For each end product, the requirements for moisture content (or solids content) vary, such that a desirable water removal strategy needs to be adaptable to varying levels of water removal. Flocculation, sedimentation, and filtration were evaluated as possible strategies for thickening and dewatering of algae. The goal of this study was to validate that algae cells treated by such means could be processed by vacuum belt filters and to determine the conditions under which the solids content could be increased to …

Effects Of Biochar Treatment Of Municipal Biosolids And Horse Manure On Quality Of Runoff From Fescue Plots, Rachel Williams, Dwayne R. Edwards

Biosystems and Agricultural Engineering Faculty Publications

Land-applied horse manure and municipal biosolids can increase nutrient and bacteria concentrations in runoff. Biochar has been demonstrated to have beneficial impacts on nutrient retention and runoff quality when used to treat other land-applied organic soil amendments (e.g., poultry manure). The objective of this study was to evaluate the effects of biochar addition to horse manure and municipal biosolids on runoff concentrations of nutrients and fecal coliforms. Biochar was added at 5% to 8% (wet basis) to horse manure and biosolids that were applied to 2.4 m x 6.1 m fescue plots followed by application of simulated rainfall (102 mm …

Investigation Of Local Velocities And Phase Holdups, And Flow Regimes And Maldistribution Identification In A Trickle Bed Reactor, Mohd Fitri Bin Abdul Rahman

Doctoral Dissertations

"Trickle bed reactors are packed beds of catalyst on which gas and liquid reactants flow concurrently downward. In this work, the experimental work was carried out in 0.14 m diameter Plexiglas column using air-water system flowing over a packed bed of 3 mm glass bead particles. The local liquid and gas velocities, phase saturation and their time series have been investigated for the first time by developing, validating, and implementing a new two-tip optical fiber probe technique. It was found the radially and axially the liquid and gas velocities and their saturation vary and they also vary with times. In …

Mass Transfer Studies In Heavy Oil Recovery Using Solvents, Vijitha Mohan

Doctoral Dissertations

"Heavy oil, sometimes called bitumen, is known for its high viscosity (above 100 cp) and low API gravity (below 22⁰). In most cases, viscosity reduction is needed for the final product. There is a considerable amount of heavy oil in Alberta, Canada and the world's largest heavy oil deposit is in Venezuela. Yet less than 1% of it can be recovered because of its high viscosity. For shallow reservoirs, it is possible to resort to open cast mining. For deeper reservoirs, steam is used at ~ 350 ⁰C which gets the oil viscosity reduced to 1cp, which can now be …

Animatronic Kinect Bear, Christopher J. Barth, Luis Manjarrez, Emily Lopez

Computer Engineering

The objective of the project was to build an interactive robotic bear through the application of Computer Engineering related software and hardware concepts. Utilizing the body recognition features of XBos One Kinect, the bera will be able to mimic a user's motions in real time.

Ior Methods In Unconventional Reservoirs Of North America: Comprehensive Review, Dheiaa Alfarge, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Unconventional resources have played a significant role in changing oil industry plans recently. Shale formations in North America have huge oil in place, 900 billion barrels of recoverable oil in Bakken only. However, the predicted primary recovery is still low as less than 10%. Therefore, seeking for improved oil techniques to increase oil recovery in these complex plays is inevitable. In this paper, three stages of review have been combined to find out the applicability of the most feasible IOR methods in these unconventional reservoirs. Firstly, the most common fluid and rock properties of these reservoirs have been investigated and …

Well Integrity Assessment Of Monitoring Wells At An Active Co2-Eor Flood, Andrew Duguid, Boyun Guo, Runar Nygaard

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Assessment of well integrity has become more important for CCS and CO₂-EOR as it has become apparent that wells represent the most likely migration pathway for CO₂ to leave a CCS storage unit or a CO₂-EOR reservoir. Although wells represent a migration pathway, they are also the best vehicle for employing technology monitoring CO₂ injection and storage. This contradiction of being a potential migration path and key monitoring technology leads to a need to understand how monitoring wells may be similar or different in comparison to other types of wells with respect to migration …

3d Bioprinting Of Stem Cells And Polymer/Bioactive Glass Composite Scaffolds For Bone Tissue Engineering, Caroline Murphy, Krishna Kolan, Wenbin Li, Julie A. Semon, D. E. Day, Ming-Chuan Leu

Biological Sciences Faculty Research & Creative Works

A major limitation of using synthetic scaffolds in tissue engineering applications is insufficient angiogenesis in scaffold interior. Bioactive borate glasses have been shown to promote angiogenesis. There is a need to investigate the biofabrication of polymer composites by incorporating borate glass to increase the angiogenic capacity of the fabri-cated scaffolds. In this study, we investigated the bioprinting of human adipose stem cells (ASCs) with a polycaprolac-tone (PCL)/bioactive borate glass composite. Borate glass at the concentration of 10 to 50 weight %, was added to a mixture of PCL and organic solvent to make an extrudable paste. ASCs suspended in Matrigel …

Development Of A Nonlinear Model For The Prediction Of Response Times Of Glucose Affinity Sensors Using Concanavalin A And Dextran And The Development Of A Differential Osmotic Glucose Affinity Sensor, Louis G. Reis

Doctoral Dissertations

With the increasing prevalence of diabetes in the United States and worldwide, blood glucose monitoring must be accurate and reliable. Current enzymatic sensors have numerous disadvantages that make them unreliable and unfavorable among patients. Recent research in glucose affinity sensors correct some of the problems that enzymatic sensors experience. Dextran and concanavalin A are two of the more common components used in glucose affinity sensors. When these sensors were first explored, a model was derived to predict the response time of a glucose affinity sensor using concanavalin A and dextran. However, the model assumed the system was linear and fell …

Synthesis, Characterization, And Activity Of Co/Fe Alumina/Silica Supported Ft Catalysts And The Study Of Promoter Effect Of Ruthenium, Sunday Azubike Esumike

Doctoral Dissertations

The alumina and hybrid alumina-silica FT catalyst were prepared by one-step solgel/oil-drop methods using metal-nitrate-solutions (method-I), and nanoparticle-metaloxides (method-2). The nanoparticle-metal-oxides did not participate in solubility equilibria in contrast to metal nitrate in method-1 causing no metal ion seepage; therefore, method-2 yields higher XRF metal loading efficiency than method-1. The thermal analysis confirmed that the metal loading by method-1 and method-2 involved two different pathways. Method-1 involves solubility equilibria in the conversion of metal-nitrate to metal- hydroxide and finally to metal-oxide, while in method-2 nanoparticle-metal-oxide remained intact during sol-gel-oil-drop and calcination steps.

The alumina supported catalysts were dominated by γ-alumina …

A Novel Diffuse Fraction-Based Two-Leaf Light Use Efficiency Model: An Application Quantifying Photosynthetic Seasonality Across 20 Ameriflux Flux Tower Sites, Hao Yan, Shao-Qiang Wang, Kai-Liang Yu, Bin Wang, Qin Yu, Gil Bohrer, Dave P. Billesbach, Rosvel Bracho, Faiz Rahman

Department of Agricultural and Biological Systems Engineering: Faculty Publications

.

Diffuse radiation can increase canopy light use efficiency (LUE). This creates the need to differentiate the effects of direct and diffuse radiation when simulating terrestrial gross primary production (GPP). Here, we present a novel GPP model, the diffuse-fraction-based two-leaf model (DTEC), which includes the leaf response to direct and diffuse radiation, and treats maximum LUE for shaded leaves (ε_msh defined as a power function of the diffuse fraction (D_f)) and sunlit leaves (ε_msu defined as a constant) separately. An Amazonian rainforest site (KM67) was used to calibrate the model by simulating the linear relationship between …

A Cmos Synapse Design Implementing Tunable Asymmetric Spike Timing-Dependent Plasticity, Robert C. Ivans, Kurtis D. Cantley, Justin L. Shumaker

Electrical and Computer Engineering Faculty Publications and Presentations

A CMOS synapse design is presented which can perform tunable asymmetric spike timing-dependent learning in asynchronous spiking neural networks. The overall design consists of three primary subcircuit blocks, and the operation of each is described. Pair-based Spike Timing-Dependent Plasticity (STDP) of the entire synapse is then demonstrated through simulation using the Cadence Virtuoso platform. Tuning of the STDP curve learning window and rate of synaptic weight change is possible using various control parameters. With appropriate settings, it is shown the resulting learning rule closely matches that observed in biological systems.

Evaluating The Ability Of Swell Prediction Models To Predict The Swell Behavior Of Excessively High Plastic Soils, Bhaskar Chittoori, Mir Md. Tamim, Amit Gajurel, Deb Mishra

Civil Engineering Faculty Publications and Presentations

Lightly loaded structures underneath expansive soils encounter severe damage due to the swell/shrink nature of expansive soils resulting from moisture variations. Billions of dollars are spent every year to repair the damages caused by these soils in the U.S. and worldwide. Designing structures to accommodate the swelling strains is a major challenge as predicting the swelling potential of these soils accurately is not easy. A wide variety of swell prediction models have been introduced by various researchers to predict the behavior of these often-problematic expansive soils. These models include various properties of soils such as, plasticity characteristics, compaction conditions, consolidation …

Geotechnical Evaluations Of A Tailings Dam For Use By A Molybdenum And Copper Mine Project In Southern Idaho, Thomas Robbins, Bhaskar C.S. Chittoori

Civil Engineering Faculty Publications and Presentations

A proposed mining project in Boise County, Idaho for the extraction of copper, molybdenum, and silver deposits, required investigations into a possible tailings dam construction that will be built using the processed material from the mine. The mine is located southwest of Lowman Idaho, northeast of Pioneerville Idaho, and directly north of Jackson Peak Mountain. The total area for the proposed project is approximately 12 square kilometers and the estimated material to be excavated is about 1.99 billion cubic meters (BCM) (USDA 2013). Typical investigations into the construction of a tailings dam consist of identifying the types of ore contained …

Geopolymerization Of Coal Ash To Produce Cementless Binders, Hamid Akbari, Robert Mensah-Biney, Jonathan Simms

Coal Combustion and Gasification Products Journal Archive

The main objective of this study was to evaluate geopolymer concrete made from coal combustion by-products, disposed of in landfills, as a potential substitute for the ordinary Portland cement (OPC), which is responsible for 5-8% of the total CO2 emissions in the world. In this study, a coal fly ash sample from the Carolinas was used in a chemical process known as geopolymerization to produce a “geopolymer” binder. The developed geopolymer binder could competently substitute the OPC binder in regular concrete applications. An experimental design program was conducted to optimize parameters of the geopolymerization affecting the strength of the final …

Groundwater Monitoring And Data Analysis Under The Coal Combustion Residuals Rule, Bruce Hensel

Coal Combustion and Gasification Products Journal Archive

No abstract provided.

Ponded And Landfilled Fly Ash As A Source Of Rare Earth Elements From A Kentucky Power Plant, James C. Hower, John G. Groppo, Kevin R. Henke, Uschi M. Graham, Madison M. Hood, Prakash Joshi, Dorin V. Preda

Coal Combustion and Gasification Products Journal Archive

Twenty samples, with one composite sample built out of the 20 individual samples, of ponded ash were collected at a Kentucky power plant. The coal feed throughout the history of the power plant was central eastern Kentucky low- to moderate-S high volatile A bituminous coal. The pond was in the process of being excavated, with the ash moved to a landfill on another company property. In spite of the long history of the pond and the expected variation in coal supply, and perhaps because of the mixing due to the excavation, there is little variation in ash-basis rare earth elements …