Engineering Commons^™

Precision Metrology Of Laser Plasmas In The Xuv Band, John Szilagyi

Electronic Theses and Dissertations

The XUV band, a region of light spanning the wavelength range of 5 - 200 nm, is located between the Ultraviolet and X-ray regions of the electromagnetic spectrum. It is further divided into a 100 - 200 nm region called the Vacuum Ultraviolet (VUV), and a 5 – 100 nm region called the Extreme Ultraviolet (EUV). Applications of this light have been slow to develop due to the lack of suitable sources, efficient optics, and sensitive detectors. Recently, many industries such as the semiconductor manufacturing industry, medical surgery, micromachining, microscopy, and spectroscopy have begun to benefit from the short wavelengths …

Field Evaluation Of Insync Adaptive Traffic Signal Control System In Multiple Environments Using Multiple Approaches, Md Shafikul Islam Shafik

Electronic Theses and Dissertations

Since the beginning of signalization of intersections, the management of traffic congestion is one of most critical challenges specifically for the city and urbanized area. Almost all the municipal agencies struggle to manage the perplexities associated with traffic congestion or signal control. The Adaptive Traffic Control System (ATCS), an advanced and major technological component of the Intelligent Transportation Systems (ITS) is considered the most dynamic and real-time traffic management technology and has potential to effectively manage rapidly varying traffic flow relative to the current state-of-the-art traffic management practices. InSync ATCS is deployed in multiple states throughout the US and expanding …

A Triangulation Based Coverage Path Planning For A Mobile Robot With Circular Sensing Range, Vatana An

Electronic Theses and Dissertations

In this dissertation, two coverage path planning (CPP) approaches for a nonholonomic mobile robot are proposed. The first approach is the Local Coverage Path Planning (LCPP) approach which is designed for all sensing ranges. The second approach is the Global Coverage Path Planning (GCPP) approach which is designed for sufficient sensing range that can observe all points of interests in the target region (TR). The LCPP approach constructs CP after finding observer points for all local regions in the TR. The GCPP approach computes observer points after CP construction. Beginning with the sample TR, the LCPP approach requires 8 algorithms …

Assessing Interactions Between Estuary Water Quality And Terrestrial Land Cover In Hurricane Events With Multi-Sensor Remote Sensing, Chandan Mostafiz

Electronic Theses and Dissertations

Estuaries are environmentally, ecologically and environmentally important places as they act as a meeting place for land, freshwater and marine ecosystems. They are also called nurseries of the sea as they often provide nesting and feeding habitats for many aquatic plants and animals. These estuaries also withstand the worst of some natural disasters, especially hurricanes. The estuaries as well as the harbored ecosystems undergo significant changes in terms of water quality, vegetation cover etc. and these components are interrelated. When hurricane makes landfall it is necessary to assess the damages as quickly as possible as restoration and recovery processes are …

Ldmos Power Transistor Design And Evaluation Using 2d And 3d Device Simulation, Aiman Salih

Electronic Theses and Dissertations

The benefit of the super-junction (SJ) technique and the use of a floating P layer for low voltage (30 V) laterally double-diffused metal oxide semiconductor (LDMOS) transistors are investigated in this thesis using Sentaurus TCAD simulation software. Optimizations to the SJ LDMOS were attempted such as adding a buffer layer to the device, but simulation and theoretical evidence point out that the benefits of the SJ technique are marginal at the 30 V application. A replacement for the SJ technique was sought, the floating P structure proved to be a good solution at the low voltage range due to its …

An All-Against-One Game Approach For The Multi-Player Pursuit-Evasion Problem, Shahriar Talebi

Electronic Theses and Dissertations

The traditional pursuit-evasion game considers a situation where one pursuer tries to capture an evader, while the evader is trying to escape. A more general formulation of this problem is to consider multiple pursuers trying to capture one evader. This general multi-pursuer one-evader problem can also be used to model a system of systems in which one of the subsystems decides to dissent (evade) from the others while the others (the pursuer subsystems) try to pursue a strategy to prevent it from doing so. An important challenge in analyzing these types of problems is to develop strategies for the pursuers …

Development And Application Of Microelectrodes To Study In Situ Disinfectant Loss And Corrosion On Metal Surface, Xiangmeng Ma

Electronic Theses and Dissertations

The primary objective of this research was to develop, fabricate, evaluate and utilize microelectrodes to metal coupons in artificial water system. In the brass experiment, it presented profiles of direct measurements of free chlorine/monochloramine, oxygen and pH to brass and cement based coupons. In monochloraminated water, brass showed a much faster corrosion process under observation. Profiles showed a less monochloramine consumption with as high as 7% greater oxygen utilization comparing to the brass in free chlorine solution, reflecting oxygen could be a major part of the corrosion initiation process. While cement showed less reactive characteristics to disinfectants and oxygen compared …

Effect Of Load Path And Failure Modes On Seismic Response Of Regular Bridges., Haider Darwash

Electronic Theses and Dissertations

Bridges are essential infrastructure constituents that have been studied for centuries. Typically, seismic bridge design and assessment utilize simplified modeling and analysis techniques based on one-dimensional spine elements and zero-length springs/hinges. The geometry of the elements and calibration of parameters are based on assumptions for the lateral load path and failure modes, e.g., sacrificial backwall and shear keys, neglecting wing walls, and strength based on backfill alone. These assumptions have led to observations of underestimated resistance, overestimated displacement demands, and unpredicted damage and failure mode. The focus of the study is on ordinary standard bridges with continuous reinforced concrete box …

Optimization Approaches For Electricity Generation Expansion Planning Under Uncertainty, Yiduo Zhan

Electronic Theses and Dissertations

In this dissertation, we study the long-term electricity infrastructure investment planning problems in the electrical power system. These long-term capacity expansion planning problems aim at making the most effective and efficient investment decisions on both thermal and wind power generation units. One of our research focuses are uncertainty modeling in these long-term decision-making problems in power systems, because power systems' infrastructures require a large amount of investments, and need to stay in operation for a long time and accommodate many different scenarios in the future. The uncertainties we are addressing in this dissertation mainly include demands, electricity prices, investment and …

A Framework For Measuring Return On Investment For Healthcare Simulation-Based Training, Hatim Bukhari

Electronic Theses and Dissertations

In the healthcare sector, providing high-quality service in a safe environment for both patient and staff is an obvious and ultimate major objective. Training is an essential component for achieving this important objective. Most organizations acknowledge that employee simulation-based training programs are an important part of the human capital strategy, yet few have effectively succeeded in quantifying the real and precise ROI of this type of investment. Therefore, if the training is perceived as a waste of resources and its ROI is not clearly recognized, it will be the first option to cut when the budget cut is needed. The …

Anisotropy Evolution Due To Surface Treatment On 3d-Printed Fused Deposition Modeling (Fdm) Of Acrylonitrile Butadiene Styrene (Abs), Blake E. Lozinski

Honors Undergraduate Theses

Purpose: This paper will present insight to the methodology and results of the experimental characterization of Acrylonitrile Butadiene Styrene (ABS) using Fused Deposition Modeling (FDM). The work in this research explored the effects of print orientation, surface treatment, and ultraviolet (UV) light degradation with the utilization of Digital Image Correlation (DIC) on ABS tensile specimens.

Design/methodology: ABS specimens were printed at three build orientations (flat (0 degrees), 45 degrees, and up-right (90 degrees)). Each of these specimens were treated with three different surface treatments including a control (acrylic paint, Cyanoacrylate, and Diglycidyl Bisphenol A) followed by exposure to UV light …

Time-Frequency Masking Performance For Improved Intelligibility With Microphone Arrays, Joshua P. Morgan

Theses and Dissertations--Electrical and Computer Engineering

Time-Frequency (TF) masking is an audio processing technique useful for isolating an audio source from interfering sources. TF masking has been applied and studied in monaural and binaural applications, but has only recently been applied to distributed microphone arrays. This work focuses on evaluating the TF masking technique's ability to isolate human speech and improve speech intelligibility in an immersive "cocktail party" environment. In particular, an upper-bound on TF masking performance is established and compared to the traditional delay-sum and general sidelobe canceler (GSC) beamformers. Additionally, the novel technique of combining the GSC with TF masking is investigated and its …

Improving The Performance Of Data-Intensive Computing On Cloud Platforms, Wei Dai

Electronic Theses and Dissertations

Big Data such as Terabyte and Petabyte datasets are rapidly becoming the new norm for various organizations across a wide range of industries. The widespread data-intensive computing needs have inspired innovations in parallel and distributed computing, which has been the effective way to tackle massive computing workload for decades. One significant example is MapReduce, which is a programming model for expressing distributed computations on huge datasets, and an execution framework for data-intensive computing on commodity clusters as well. Since it was originally proposed by Google, MapReduce has become the most popular technology for data-intensive computing. While Google owns its proprietary …

An Analytical Investigation Of Prestressed Beam Bridge Performance Before And After Widening, Chris Oriordan Adjah

Electronic Theses and Dissertations

As traffic and congestion increase, so does the likelihood of collisions. The solution to this problem is usually through a rehabilitation process with two primary options: (1) widening/expansion of existing roadway and bridges and (2) complete replacement (new construction) of roadway and bridges. The first option is the most feasible and cost-effective. While roadway widening/expansion pose minimal issues, the same cannot be said of bridge widening. An existing bridge presents a multitude of challenges during the planning and design phases, during construction, and throughout the structure's service life. Special attention is required in both the design and detailing of the …

Chaotification As A Means Of Broadband Vibration Energy Harvesting With Piezoelectric Materials, Daniel Geiyer

Electronic Theses and Dissertations

Computing advances and component miniaturization in circuits coupled with stagnating battery technology have fueled growth in the development of high efficiency energy harvesters. Vibration-to-electricity energy harvesting techniques have been investigated extensively for use in sensors embedded in structures or in hard-to-reach locations like turbomachinery, surgical implants, and GPS animal trackers. Piezoelectric materials are commonly used in harvesters as they possess the ability to convert strain energy directly into electrical energy and can work concurrently as actuators for damping applications. The prototypical harvesting system places two piezoelectric patches on both sides of the location of maximum strain on a cantilever beam. …

The Study Of Physiochemical Properties Of Cerium Oxide Nanoparticles And Its Application In Biosensors, Swetha Barkam

Electronic Theses and Dissertations

Biosensors continue to get smaller and faster with the advancement in nanotechnology through the use of nanomaterials to achieve high sensitivity and selectivity. However, the continued reliance on biomolecules or enzymes in the biosensor assembly poses the problem of reproducibility, storage and complexity. This dissertation research address some of the challenges by investigating the physiochemical properties of nanoparticles to understand its interaction with biological systems and develop enzyme free biosensors. In this study, we have demonstrated a novel strategy to integrate cerium oxide nanoparticles (CNPs) as an efficient transducer through rigorous screening for developing enzyme/label free biosensors for detecting analytes …

Investigating Novel Water Treatment Methods And Monitoring Techniques For Sulfide-Laden Groundwater Supplies, Benjamin Yoakum

Electronic Theses and Dissertations

This dissertation reports on research related to novel water treatment and monitoring techniques for sulfide-laden groundwater supplies. The dissertation is divided into several chapters with four core chapters focused on investigations studying a novel water treatment method or monitoring technique. The first investigation assessed the efficacy of multi-pass spray aeration treatment to remove trihalomethanes (THMs) and to reduce the total THM formation potential (TTHMFP) of an aerated water column post-aeration. A recirculating spray aeration pilot unit was constructed to make this assessment. To assess the effect of multi-pass spray aeration on the TTHMFP, water was recirculated through a fabricated spray …

A Training Effectiveness Evaluation Of Uh-60a/L Simulated Environments: An Interdisciplinary Approach, Martin Goodwin

Electronic Theses and Dissertations

The U.S. military continues to develop and expand its use of simulation-based aviation training. While traditional simulation-based training continues to be a proven training method, game-based simulation has become more sophisticated and may provide viable training options in some applications. The use of game-based simulation with traditional simulation-based training can potentially reduce costs, enhance return on investment, advance training objectives, and inform future training environment designs. Current fiscal limitations are driving the need for more efficient training methods, while operational requirements are dictating training protocols that produce optimum levels of readiness. The gap between fiscal constraints and desired training outcomes …

Armagh Observatory: Historic Building Information Modelling For Virtual Learning In Building Conservation, Maurice Murphy, Alain Chenaux, Garrett Keenaghan, V. Gibson, John Butler, C. Pybusr

Conference papers

In this paper the recording and design for a Virtual Reality Immersive Model of Armagh Observatory is presented, which will replicate the historic buildings and landscape with distant meridian markers and position of its principal historic instruments within a model of the night sky showing the position of bright stars. The virtual reality model can be used for educational purposes allowing the instruments within the historic building model to be manipulated within 3D space to demonstrate how the position measurements of stars were made in the 18th century. A description is given of current student and researchers activities concerning on-site …

Current State Of The Art Historic Building Information Modelling, Conor Dore, Maurice Murphy

Conference papers

In an extensive review of existing literature a number of observations were made in relation to the current approaches for recording and modelling existing buildings and environments: Data collection and pre-processing techniques are becoming increasingly automated to allow for near real-time data capture and fast processing of this data for later modelling applications. Current BIM software is almost completely focused on new buildings and has very limited tools and pre-defined libraries for modelling existing and historic buildings. The development of reusable parametric library objects for existing and historic buildings supports modelling with high levels of detail while decreasing the modelling …

Strengthening The Development Of The Short-Rotation Plantations Bioenergy Sector: Policy Insights From Six European Countries, Carlos Parra-Lopez, Martin Holley, Kevin Lindegaard, Samir Sayadi, Gonzalo Esteban-Lopez, Victor Duran-Zuazo, Christoph Knauer, Hans-Georg Von Engelbrechten, Ralf Winterber, Annika Henriksson, Annette Lamley, Anders Nylander, Susanne Paulrud, Pauline Leonard, Patrick Daly, Lukasz Drzewaszewski, Wojciech Rzewuski

Articles

This paper, based on a participatory methodological framework involving expert stakeholders and researchers from six European countries (Germany, Ireland, Poland, Spain, Sweden and UK), analyses the priority issues for the development of short-rotation plantations (SRP), and proposes a series of policy strategies to strengthen this development. The results indicate that there is a lack of awareness of the multifaceted benefits of SRP at the level of farmers, policy makers and public authorities. More research is required to put a value on the multifunctionality of SRP and justify its public support. Small-scale projects using established technologies are also required with energy …

Investigation Into The Local Nature Of Rate Of Change Of Frequency In Electrical Power Systems, Damien Doheny, Michael Conlon

Conference papers

In recent years power systems world-wide have seen large increases in wind power penetration and this trend is expected to continue. This is having the undesirable consequence of reducing the inertia of electrical power systems, especially at times of high wind generation. Reduced inertia makes a power system more susceptible to a larger rate of change of frequency (RoCoF) following a grid disturbance, such as the sudden disconnection of a load or generator. High RoCoF events could trigger generator protective devices or anti-islanding RoCoF relays, disconnecting generation from the grid, compounding the initial grid disturbance and in extreme cases result …

Investigating Students’ Perception Using Construction Management Simulations, Saeed Rokooei, James D. Goedert, Asregedew Woldesenbet

Department of Construction Engineering and Management: Faculty Publications

Today, construction programs are incorporating a wide variety of active learning methods in their curricula to improve student learning outcomes and induce a more knowledge retention rate. Simulations and educational games are one of the fast growing and effective active learning methods that have been implemented in many programs. However, there are few instances of such learning methods applied in construction programs and a limited number of research projects have been conducted to investigate short-term and long-term outcomes of these methods and applications. This paper presents construction students’ perceptions of tested simulations with regards to the features, knowledge gained, level …

Brain Connectivity After Concussion, Armin Iraji

Wayne State University Dissertations

Mild traumatic brain injury (mTBI) accounts for over one million emergency visits in the United States each year. While most mTBI patients have normal findings in clinical neuroimaging, alterations in brain structure and functional connectivity have frequently been reported. In this study, we investigated the large-scale brain structural and functional connectivity using diffusion MRI and resting-state fMRI data. Data from 40 mTBI patients was acquired at the acute stage (within 24 hrs after injury). 35 patients returned for data acquisition at a follow-up (4-6 weeks after injury). Data was also collected from a cohort of 58 healthy subjects, 36 of …

Evaluation Of Milwaukee B And Synchronized As New Service Interchange Designs, Amirarsalan Mehrara Molan

Wayne State University Dissertations

These days, alternative interchanges are attracting the attention of transportation

agencies and designers more than ever. Most of the existing interchanges in the U.S

were built in the 1950s and 1960s when traffic volume was much lower, and the type of

vehicles and driving habits were completely different. Moreover, the knowledge of

highway design and safety is more developed now, and this provides an appropriate

situation to increase the efficiency of interchanges regarding traffic operation and safety

using alternative interchanges.

This research evaluated the performance of two proposed service interchange

designs—the synchronized design which is related to a superstreet intersection …

On Detectability Of Networked Discrete Event Systems, Yazeed Sasi

Wayne State University Dissertations

Detectability of discrete event systems, the ability to determine the current and subsequent states, is very important in supervisory control and many other applications. So far only detectability of non-networked discrete event systems has been defined and investigated. Non-networked discrete event systems assume all the communication to be carried out on time without any delays or losses. The assumption of reliable link is true when the distance of communication is short; however, it is often violated in networked systems. In my dissertation, I investigate the detectability for the networked discrete event systems. Because applications vary, we investigate the four types …

Development Of A Finite Element Pelvis And Lower Extremity Model With Growth Plates For Pediatric Pedestrian Protection, Ming Shen

Wayne State University Dissertations

Finite element (FE) model is a useful tool frequently used for investigating the injury mechanisms and designing protection countermeasures. At present, no 10 years old (YO) pedestrian FE model has been developed from appropriate anthropometries and validated against limitedly available impact response data. A 10 YO child FE pelvis and lower extremities (PLEX) model was established to fill the gap of lacking such models in this age group. The baseline model was validated against available pediatric postmortem human subjects (PMHS) test data and additional scaled adult data, then the PLEX model was integrated to build a whole-body FE model representing …

Seed Plant Drone For Reforestation, Erico Pinheiro Fortes

The Graduate Review

The desertification issue in the Cape Verde Islands over the past decades has proven to be a very serious problem which concerns the entire archipelago. Erosion, inaccessible land and the lack of field workers is making agricultural production increasingly inefficient. This project seeks to construct a viable and efficient solution to improve the agricultural system and soil erosion issues in the Cape Verde islands. To accomplish this goal, we will build an autonomous flying quadcopter that will mechanically dispense seeds to restore the arid and infertile regions for agriculture.

This project has three deliverables. The first is a custom-built quadcopter …

Thermal Analysis Of 3d Printed 420 Stainless Steel, Adithya Pothuri

All Graduate Theses, Dissertations, and Other Capstone Projects

Additive manufacturing opens new possibilities in the manufacturing industry. 3D printing is a form of additive manufacturing. 3D printers will have a significant influence over the industrial market, with extremely positive effects in no time. The main aim of this research is to determine the effect of process parameters of Binder Jet manufactured 420 Stainless Steel (420SS) parts on thermal properties such as thermal conductivity. Different parameters, such as layer thickness, sintering time and sintering temperature were varied. A full factorial design of experiment matrix was made by varying these parameters using two levels. Testing showed that different parameters affected …

Optimizing Rpl Objective Function For Mobile Low-Power Wireless Networks, Mohammad Abdellatif, Ifeoma Urama, Hossein Fotouhei

Electrical Engineering

Supporting mobility in wireless sensor networks is one of the major requirements for future Internet of Things (IoT) applications. This work focuses on optimizing the objective function of Routing Protocol for Low-power and Lossy Networks (RPL) in mobile applications. RPL routing is the most common standard routing protocol designed for IoT applications. We optimized RPL objective function by combining several RPL parameters, such as (i) Expected Transmission Count (ETX), (ii) number of hops, and (iii) average Received Signal Strength Indicator (RSSI) as inputs in a fuzzy logic model. These parameters are more influenced in mobile applications. We applied the fuzzy …