Engineering Commons^™

Influence Of Skew And Nonlinear Deck On Elastic Versus Inelastic Distribution Behavior And Ultimate Capacity Of Steel Girder Bridges, Fayaz Sofi, Joshua Steelman

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Research Objectives

• Assessment of alternative load distribution methodologies for potential discrepancies that arise when evaluating distribution behavior of skewed steel girder bridges.

• Investigate the influence of skew and material nonlinearities (concrete cracking and steel yielding) on

• Load distribution behavior (elastic versus inelastic).

• System capacities (yielding and ultimate).

Summary and Conclusions • Influence of skew was examined on load distribution behavior, and nonlinear system-based capacities (yielding and ultimate) of composite steel girder bridges in presence of full material nonlinearities. In addition, assessment of two general definitions (beam-line and response fraction approaches) for quantifying load distribution behavior was …

Hyperelastic Structural Fuses For Steel Buildings, Francys López

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Why to upgrade traditional systems?

The FEMA P-58-1 listed some of the limitations in present-generation procedures:

Questions regarding the accuracy and reliability of available analytical procedures in predicting actual building response.

“High” level of conservatism underlying the acceptance criteria.

Inability to reliably and economically apply performance-based procedures to the design of new buildings; and Lack of alternative ways of communicating performance to stakeholders that is more meaningful and useful for decision making purposes.

Performance based design (PBD) emerges as the methodology aiming to bridge this gap, raising the design level performance from life safety (traditional systems) to keep structures fully …

Oxidation Of Ti2Alc In High Temperature Steam Environment, Ziyad M. Smoqi

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

High temperature oxidation of fuel cladding materials, during the loss of coolant accident (LOCA), is of utmost importance for next-generation nuclear energy systems. Ti₂AlC is a promising candidate material for nuclear applications due to its outstanding properties such as thermal stability at high temperatures, oxidation resistance in air, thermal shock resistance, low neutron absorption cross-section, and the resistance to irradiation-induced amorphization. In this research, high temperature steam oxidation experiments were conducted to evaluate the oxidation resistance of Ti₂AlC in LOCA conditions. After oxidation in 100% steam at 600 and 800˚C, the oxidation kinetics followed a parabolic …

Design For An Aging Population, Trygve Faste, Kiersten Muenchinger

TREC Final Reports

Older Americans are increasing in numbers and addressing their needs through better public transportation design will improve their quality of life. This study sought to increase understanding of the obstacles faced by people with impairments in vision, hearing and/or mobility, which are common issues for older people, and generate physical product solutions. The research was conducted to conceptualize products, structures and services to reduce or eliminate these obstacles.

With a focus on the Eugene, OR, public bus system, elderly riders were surveyed and interviewed. Designers rode on buses noting what worked well and where problems arose. Five ride-along observations of …

The Professional Constructor, Full Issue, Volume 42, Number 01

The Professional Constructor

No abstract provided.

The Future Of Social Media Usage For Scholarly Research, Brent D. Bowen, Jackie Luedtke, Timothy B. Holt, David Ehrensperger, Hunter M. Watson

Publications

The research method for this project – examining the dissemination of research artifacts through social media as well as the impact social media can have on scholarly research – originated with Dr. Brent Bowen of Embry-Riddle Aeronautical University at the Prescott, Arizona campus and Dr. Dean E. Headley of Wichita State University. Drs. Bowen and Headley introduced the Airline Quality Rating (AQR) in early 1991 as an objective method for comparing and scoring airline performance in areas deemed to be important for consumers. Scores are calculated by defining 15-elements in four major areas, focusing on airline performance and the significance …

Design Optimization And Motion Planning For Pneumatically-Actuated Manipulators, Daniel Mark Bodily

Theses and Dissertations

Soft robotic systems are becoming increasingly popular as they are generally safer, lighter, and easier to manufacture than their more rigid, traditional counterparts. These advantages allow an increased sense of freedom in both the design and operation of these platforms. In this work, we seek methods of leveraging this freedom to both design and plan motions for two different serial-chain, pneumatically actuated manipulators developed by Pneubotics, a small startup company based in San Francisco. In doing so, we focus primarily on two related endeavors: (1) the optimal kinematic design of these and other similar robots (i.e., choosing link lengths, base …

Balancing Technical And User Objectives In The Design Of Improved Biomass Cookstoves For Developing Regions Of The World, Kendall Steven Thacker

Theses and Dissertations

Over the past decade a large amount of research has been dedicated in academic literature to improving the technical capabilities of improved cookstoves; primarily the performance efficiency and reduction of emissions. Unfortunately, as published literature has highlighted, the trade-offs that result from placing such a concentrated emphasis on these technical objectives is that improved cookstoves lack the same level of usability as traditional cookstoves. Thus, users often return to using their traditional stoves and the potential impact of the improved cookstoves is never fully realized. In order for improved cookstoves to have greater impact, there must be better balance between …

Using On-Chip Error Detection To Estimate Fpga Design Sensitivity To Configuration Upsets, Andrew Mark Keller

Theses and Dissertations

SRAM-based FPGAs provide valuable computation resources and reconfigurability; however, ionizing radiation can cause designs operating on these devices to fail. The sensitivity of an FPGA design to configuration upsets, or its SEU sensitivity, is an indication of a design's failure rate. SEU mitigation techniques can reduce the SEU sensitivity of FPGA designs in harsh radiation environments. The reliability benefits of these techniques must be determined before they can be used in mission-critical applications and can be determined by comparing the SEU sensitivity of an FPGA design with and without these techniques applied to it. Many approaches can be taken to …

Principles And Insights For Design For The Developing World, Amy Eleanor Wood

Theses and Dissertations

This dissertation collects principles and insights from various sources related to design for the developing world. These principles and insights form part of the foundation that can guide other engineers working in this area. The sources are the published literature, practitioners, non-governmental organizations, and our own field studies. From the engineering literature, we identified nine principles to guide engineers as they design poverty alleviating products for developing communities. Each principle is articulated, supporting literature is described, an in-depth example from the literature is given, followed by suggestions for how the principle can be applied to day-to-day engineering activities. Next, the …

Using Lidar Data To Analyze Access Management Criteria In Utah, Marlee Lyn Seat

Theses and Dissertations

The Utah Department of Transportation (UDOT) has completed a Light Detection and Ranging (LiDAR) data inventory that includes access locations across the UDOT network. The new data are anticipated to be extremely useful in better defining safety and in completing a systemwide analysis of locations where safety could be improved, or where safety has been improved across the state. The Department of Civil and Environmental Engineering at Brigham Young University (BYU) has worked with the new data to perform a safety analysis of the state related to access management, particularly related to driveway spacing and raised medians. The primary objective …

Hybrid State-Transactional Database For Product Lifecycle Management Features In Multi-Engineer Synchronous Heterogeneous Computer-Aided Design, Devin James Shumway

Theses and Dissertations

There are many different programs that can perform Computer Aided Design (CAD). In order for these programs to share data, file translations need to occur. These translations have typically been done by IGES and STEP files. With the work done at the BYU CAD Lab to create a multi-engineer synchronous heterogeneous CAD environment, these translation processes have become synchronous by using a server and a database to manage the data. However, this system stores part data in a database. The data in the database cannot be used in traditional Product Lifecycle Management systems. In order to remedy this, a new …

Effect Of The Wake Structure On Drag Coefficient For A Thin Flexible Wire, Harika Gurram

Theses and Dissertations

The present research work focuses on investigating the effect of wake structure on the drag coefficient of a thin flexible wire. Previous researchers have investigated the flow characteristics around the cylinder and estimated the drag coefficient for different Reynold’s number range. The flow transition characteristics in the boundary layer and its effect on the drag coefficient were described. These studies were performed on a non-deformable cylinder. The present work focuses on the drag characteristics of thin flexible cylinders whose diameter is on the order of microns. The results showed up to 30% lower value than reported literature drag coefficient values …

A Physical And Computational Comparison Of Floating Breakwater Design Efficiencies For Habitat Restoration In The Indian River Lagoon, Abigail Lynn Stehno

Theses and Dissertations

This study examines the design and implementation of floating breakwaters (FB) in the Indian River Lagoon (IRL) to support and protect living shoreline restoration projects from damaging wave climates. The design significant wave climate of the IRL in a 0.6 m water depth had an incident significant wave height of 0.20 m with a wave period of 1.6 s. Based on previous studies, it has been found that habitat restoration will be successful if the wave height is reduced from 0.20 m to 0.10 m with the use of a FB structure. FB structures attenuate wave energies and are transportable, …

Measurement Comparison Of Rf Receivers In Umts 1900mhz, Mohammed Najat Mohammed Sayan

Theses and Dissertations

In every day engineering practice, drive test systems are used to verify coverage, estimate quality of service and optimize RF network. To accomplish these tasks, drive tests need to be conducted in a systematic and cost efficient way. There are several commercial UMTS drive test systems and they can be classified as high dynamic range, multiband, and phone-based measurement tools. The data obtained from the measurement tools are then analyzed using statistical methods and inference. This thesis presents a detailed and comparative study of some of the physical layer measurements in UMTS 1900MHz frequency band. The collected measurements are compared …

Woodchip Denitrification Bioreactor For Reducing Nitrate In Contaminated Well Water For St. Francis Retreat Center, Andrew Highlander, Patrick Johnson

Civil, Environmental and Sustainable Engineering Senior Theses

The St. Francis Retreat Center, which serves over 7000 people each year, has had issues with the health of Flint Lake, located on their property, during the drought season. By utilizing a nearby water well, the retreat center looks to recharge the lake and sustain its water levels, essentially restoring its natural ecosystem. The issue is that the well water is contaminated with high amounts of nitrates, which is not only an issue for the lake’s health, but also is very unsafe for human consumption. In order to design a water treatment system that is ecofriendly, sustainable, and cost-efficient, the …

Decentralized Wastewater Treatment Plant In Bangalore, India, Cameron Akhavan, Simon Barbe, Alejandro Fernandez Fernandez

Civil, Environmental and Sustainable Engineering Senior Theses

The Vrishabawathi River in Bangalore, India, has high levels of pollution due to untreated wastewater discharges from the city. The city requires significant expansion of its wastewater treatment infrastructure. Smaller-capacity plants spread throughout the city, known as decentralized treatment plants, provide an alternative to centralized treatment plants that can meet these demands. This project involved the design of one decentralized plant. This plant is located in the Kengeri district of the city, a mostly residential area in the outskirts of Bangalore. The designed treatment facility includes two primary clarifiers, two biotowers, and two secondary clarifiers. Plants like these can help …

Satellite Sequencing Optimization And Observational Orbit Determination Using Genetic Algorithms, Andrew W. Verstraete

Masters Theses

The problem of mission design for a robotic servicing satellite in geosynchronous Earth orbit (GEO) was investigated. A representative set of potential client satellites was selected, and operational needs were randomly assigned based on the average number of GEO retirements, anomalies, and repositioning maneuvers that currently occur each year. An objective function was developed to represent the value of servicing mission sequences, including client fees, time penalties, and operational risk. A genetic algorithm was then used to find sequences of operations on the potential client set that maximized the objective function’s value. Scenarios were analyzed with the database of satellites …

Solar Module Condition Monitoring Using Thermal Imaging, Ammar W. Hashim

Masters Theses

Solar energy industry has been exponentially increasing over the past decades with solar panels sales recording significant growth mainly due to the fact that solar energy is a renewable clean source of energy. Similar to other systems, condition monitoring is essential to maintain high efficiency specially that these systems are still not scoring more than 46% efficiency and also to ensure a safe system and prevent electric and fire risks that may occur. In this work, we introduce a system using infrared thermography along with selected image processing techniques to effectively and non-destructively test and detect these defects. Hot spots …

Architecture, Simulation, And Implementation Of Commodity Computer Components In Software Defined Radio Systems, Amean Al-Safi

Dissertations

Radio communications have evolved through an extended history of theoretical and practical component development into modern devices most often envisioned as the ubiquitous smart phones found in almost everyone’s hand on a university campus. During this development, radios have evolved from analog devices operating at low frequencies into nearly all digital processing systems referred to as Software Defined Radio (SDR) operating in frequency bands over 1 Gigahertz. Although specific forms and types of communication are fiercely pursued by commercial communication companies and industry, there remain numerous concepts where further advancement is possible, and applications, possibly less commercially viable, where advancements …

Multiprocessing Real Time Vision Based System For Condition Monitoring In Solar Panels, Moath Hashim Alsafasfeh

Dissertations

Enabling an algorithm to be executed in parallel on a multicore or a multiprocessor system has become a necessity for many real time applications. Multicore systems are widely used to improve performance and satisfy time and power demands. In this dissertation, solar energy, which has proved itself as the future clean source of energy, is also considered in real time. Optimum utilization of this energy propelled research efforts into many directions of the solar system components. However, while real time operations of Photovoltaic (PV) systems occur without any supervisory mechanisms, many internal and/or external obstacles can occur and hinder a …

Behavior And Strength Of Rc Spandrel Members Under Unsymmetrical Bending And Torsion Including Cfrp Retrofitting, Muhammad Fahim

Civil & Environmental Engineering Theses & Dissertations

This dissertation presents the outcome of an experimental and theoretical investigation of the behavior and strength of reinforced concrete spandrel members both with and without carbon fiber reinforced polymer (CFRP) retrofitting. Both isolated spandrel members with L-shaped cross section as well as those integrated with reinforced concrete slabs are studied. A series of isolated spandrel members were tested under separate and combined actions of unsymmetrical bending and torsion. Six of these specimens were retrofitted externally with high-strength CFRP strips. Materially nonlinear analysis procedures are also formulated and programmed for the spandrel members with and without CFRP retrofitting. Furthermore, ultimate bending-torsion …

A Household Daily Non-Mandatory Activity Participation And Duration Modeling Accounting For Person Level Budget Constraints, Ivana Vukovic

Civil & Environmental Engineering Theses & Dissertations

A key methodological and behavioral innovative component in recent Activity-Based Models (ABMs) used for transportation planning is the household-level non-mandatory activity participation component. While traditional ABMs use a series of simple models to predict non-mandatory activity participation decisions in a sequential manner (which is often not correct), the Multiple Discrete Continuous Extreme Value (MDCEV) model can model both individual and joint non-mandatory activity participation and time allocation decisions in different out-of-home activities of all household members simultaneously. A key advantage of the MDCEV framework is that it accounts for complex intra-household interactions among different household members by allocating the total …

Role Of Requirements Engineering In Software Project’S Success, Sujatha Alla

Engineering Management & Systems Engineering Theses & Dissertations

Despite considerable time and resources spent on the initiation phase of software projects, discrepancies often exist between formal project documentation, customer requirements, and final project specifications. Such discrepancies in the requirements management process can have a very negative impact on final project outcomes. A Business Requirements Document (BRD) constitutes the formal software requirements documentation, which typically includes stakeholders’ needs and expectations and project scope while providing a clear project roadmap and project plan. According to IEEE standards, a BRD should be a structured document that includes specific elements such as functional and technical requirements while incorporating certain traits such as …

A Predictor Analysis Framework For Surface Radiation Budget Reprocessing Using Design Of Experiments, Patricia Allison Quigley

Engineering Management & Systems Engineering Theses & Dissertations

Earth’s Radiation Budget (ERB) is an accounting of all incoming energy from the sun and outgoing energy reflected and radiated to space by earth’s surface and atmosphere. The National Aeronautics and Space Administration (NASA)/Global Energy and Water Cycle Experiment (GEWEX) Surface Radiation Budget (SRB) project produces and archives long-term datasets representative of this energy exchange system on a global scale. The data are comprised of the longwave and shortwave radiative components of the system and is algorithmically derived from satellite and atmospheric assimilation products, and acquired atmospheric data. It is stored as 3-hourly, daily, monthly/3-hourly, and monthly averages of 1°x1° …

Modification Of Deposition Process Parameters For Uniform Indium Layer Deposition, Isaac Butt

Electrical & Computer Engineering Theses & Dissertations

The need for more efficient light to energy converting cells has long been a subject of research and development. With abundant availability of solar energy that the earth receives, the photovoltaic industry has sought materials that could serve the purpose of great energy conversion. The photovoltaic industry is mainly dominated by Silicon owing to its abundant availability, reliability and economic cost. However, due to limitations on efficiency improvements, some focus has shifted toward III-V based solar cells with a great potential for attaining higher efficiency and multi-junction applications. However, the cost of the III-V materials is extremely high due to …

Development Of An Analysis And Design Optimization Framework For Marine Propellers, Ashish C. Tamhane

Mechanical & Aerospace Engineering Theses & Dissertations

In this thesis, a framework for the analysis and design optimization of ship propellers is developed. This framework can be utilized as an efficient synthesis tool in order to determine the main geometric characteristics of the propeller but also to provide the designer with the capability to optimize the shape of the blade sections based on their specific criteria.

A hybrid lifting-line method with lifting-surface corrections to account for the three-dimensional flow effects has been developed. The prediction of the correction factors is achieved using Artificial Neural Networks and Support Vector Regression. This approach results in increased approximation accuracy compared …

Behavior And Strength Of Non-Prestressed And Prestressed Hillman Composite Beam Including Cfrp Retrofitting, Wajid Khan

Civil & Environmental Engineering Theses & Dissertations

The Hillman Composite Beam (HCB) is a recent innovation used for the first time in 2008 for a bridge construction in USA. It essentially consists of an FRP outer shell, concrete arch inside the shell and steel strands used to tie the two ends of the arch. Being new in the field, the behavior of HCB has not been thoroughly studied. This dissertation presents a study of the flexural behavior and strength of HCB up to the collapse as well as explores the influence of using carbon reinforced polymer (CFRP) retrofitting and prestressed steel for a further increase in HCB …

Recurrent Neural Networks And Matrix Methods For Cognitive Radio Spectrum Prediction And Security, Alexander M. Glandon

Electrical & Computer Engineering Theses & Dissertations

In this work, machine learning tools, including recurrent neural networks (RNNs), matrix completion, and non-negative matrix factorization (NMF), are used for cognitive radio problems. Specifically addressed are a missing data problem and a blind signal separation problem. A specialized RNN called Cellular Simultaneous Recurrent Network (CSRN), typically used in image processing applications, has been modified. The CRSN performs well for spatial spectrum prediction of radio signals with missing data. An algorithm called soft-impute for matrix completion used together with an RNN performs well for missing data problems in the radio spectrum time-frequency domain. Estimating missing spectrum data can improve cognitive …

Deposition Of Silicon Thin Films By Ion Beam Assisted Deposition, Tejaswini Miryala

Electrical & Computer Engineering Theses & Dissertations

With the depletion of non-renewable energy sources owing to increasing demands, we need to develop renewable energy sources, which can replace them with cleaner energy sources. The solar industry is one of these renewable energies. In spite of having very high potential, harvesting solar energy has been a challenge due to the cost of solar cells. Silicon dominates the photovoltaic industry, but even this technology can accommodate great improvements. This can be done notably by finding low cost deposition techniques for the silicon. The main aim of this thesis is to form high-quality nanocrystalline silicon thin films with the help …