Engineering Commons^™

Nano-Channels Early Formation Investigation On Stainless Steel 316ti After Immersion In Molten Pb-Bi, Abu Khalid Rivai, Mardiyanto Mardiyanto, Annette Heinzel

Makara Journal of Technology

Development of fuel cladding and structural materials in Pb-Bi environment, especially at high temperature, is a critical issue for the deployment of LFR (Lead alloy-cooled Fast Reactor) and ADS (Accelerator Driven Transmutation System). This is because of the corrosive characteristic of Pb-Bi to metals as constituent materials of fuel cladding and structural of the reactors. Corrosion test of a high-chromium austenitic stainless steel i.e. SS316Ti in molten Pb-Bi at 550 ºC has been carried out for about 300 hours continuously. The characterization using SEM-EDS (Scanning Electron Microscopy - Energy Dispersive X-ray Spectroscopy) showed that an iron oxide as the outer …

Synthesis Of Libob Fine Powder To Increase Solubility, Etty Marti Wigayati, Titik Lestariningsih, Christin Rina Ratri, Ibrahim Purawiardi, Bambang Prihandoko

Makara Journal of Technology

Lithium bis (oxalate) borate or LiBOB compound has captured interest of researchers, because it is potentially viable to be used as electrolyte salt in lithium-ion battery system. This compound is easy to synthesize and considered to be more environmentally friendly compared to conventional electrolyte salt because LiBOB does not contain halogen element. This research focused on the synthesis of LiBOB fine powder, which main purpose is improving LiBOB salt solubility in liquid electrolyte solution. This will aid the ion transfer between electrodes which in turn will increase the electrolyte performance. Solid state reaction was employed in this experiment. Synthesis of …

Influence Of Polyethylene Glycol (Peg) In Cmc-Nh4br Based Polymer Electrolytes: Conductivity And Electrical Study, Nur Khalidah Zainuddin, Ahmad Salihin Samsudin

Makara Journal of Technology

The present work was carried with new type and promising polymer electrolytes system by development of carboxyl methylcellulose (CMC) doped NH4Br and plasticized with polyethylene glycol (PEG). The sample was successfully prepared via solution casting with no separation phase and good mechanical properties. The electrical conductivity and thermal conductivity of CMC-NH4Br-PEG based PEs system have been measured by the electrical impedance spectroscopy method in the temperature range of 303–373 K. The highest ionic conductivity gained is 2.48 x 10-3 Scm-1 at ambient temperature for sample contain with 8 wt. % PEG. It can be concluded that the plasticized is accountable …

Purification Simulation With Vapor Permeation And Distillation-Adsorption In Bioethanol Plant, Misri Gozan, Mia Sari Setiawan, Kenny Lischer

Makara Journal of Technology

High purity of Bioethanol is required in biofuel mixing with gasoline (EXX). In bioethanol production line, the azeotropic property of ethanol-water becomes the barrier for purification process. This study examined two bioethanol separation processes by support of simulation tools, Superpro Designer 9.0 software. Ethanol purity and a low costeconomical process were the major considerations. Purification method of vapor permeation membrane technology was compared with distillation-adsorption method. Data from previous lab experiments and some literatures were used. The results showed that distillation-adsorption method is more economical compared to vapor permeation technology. Payback period of the simulation is 3.9 years and 4.3 …

The Effects Of Light Intensity On The Growth Kinetics Of The Cyanobacteria Synechococcus Elongatus And Synechocystis Sp., Aleshia Lexus Hector

Honors Capstones

No abstract provided.

Quantitative Analysis Of High Pressure Hazards In Oil And Gas Field Operations, Giuseppe Feo

Honors Capstones

No abstract provided.

The Chiral Coefficient: Rapid Optimization Of Plasmonic Circular Dichroism, Jon Wilson

Honors Capstones

No abstract provided.

Attentiveness On Airline Quality As Viewed By The Domestic Consumer, Brent D. Bowen, Erin Bowen, Dean E. Headley, Mary Fink, Madeline S. Kuhn

Publications

This study examines the relationship between the quantitative model of the Airline Quality Rating (AQR), and the qualitative model of the Airline Passenger Survey (APS). Operational performance of the U.S. airline industry has been monitored for the past 27 years by the Airline Quality Rating, and qualitative performance has been monitored for the past 6 years by the Airline Passenger Survey. The AQR provides consumers and aviation industry professionals a means to compare performance quality among U.S. airlines using objective, performancebased data. No other airline study in the country is based on performance measures. The APS was added as a …

The Vulnerabilities Of Hypoxic Events Within General Aviation, Timothy B. Holt, Jacqueline Luedtke, Claire Schindler

Publications

The problem this study addresses is the uncertainty of the common circumstances that general aviation pilots find themselves in that create a hypoxic state, their symptoms of hypoxia, as well as whether or not that pilot deemed the event to put them in an unsafe flight condition. The results of this study showed not only those that were impacted the greatest by hypoxia, but also a caring concern for reporting these events to better flight physiology training. The key elements for this research were:

• Level of pilot experience who have experienced hypoxia
• Reporting statistics
• Symptoms experienced
• Suggestions for bettering flight …

Incorporating Digital Learning Tools In Conjunction With Air Traffic Control Simulation, Jennah Perry, Jacqueline Luedtke, Allison Little, Benjamin Cook, Holly Hughes

Publications

Learning and applying complex information at a fast rate can be challenging for students within an air traffic control - training program. Incorporating digital learning tools into an air traffic control training programs may increase student learning and success rates. Swivl is a digital learning capture tool designed to enhance student learning by allowing students to refer back to their individual classroom lab training session videos via an online portal. Embry Riddle’s air traffic program has started using Swivl in two separate ATC courses in order to determine if it is a viable solution to increase learning.

During our research, …

Improvements, Algorithms And A Simulation Model For A Compact Phased-Array Radar For Uas Sense And Avoid, Adam Kaleo Roberts

Theses and Dissertations

Unmanned aerial systems (UAS) are an influential technology which can enhance life in multiple ways. However, they must be able to sense and operate safely with manned aircraft. Radar is an attractive sensor for UAS because of its all-weather performance. It is challenging, though, to meet the size, weight, and power (SWaP) limitations of UAS and especially small-UAS while still maintaining the needed sensing capability. A working FMCW radar prototype has been created which meets the SWaP requirement of small-UAS. A simulation model for the radar was developed to test the processing algorithms of the radar and proved to be …

High-Speed Programmable Fpga Configuration Memory Access Using Jtag, Ammon Bradley Gruwell

Theses and Dissertations

Over the past couple of decades Field Programmable Gate Arrays (FPGAs) have become increasingly useful in a variety of domains. This is due to their low cost and flexibility compared to custom ASICs. This increasing interest in FPGAs has driven the need for tools that both qualify and improve the reliability of FPGAs for applications where the reconfigurability of FPGAs makes them vulnerable to radiation upsets such as in aerospace environments. Such tools ideally work with a wide variety of devices, are highly programmable but simple to use, and perform tasks at relatively high speeds. Of the various FPGA configuration …

Electrospun Spiderskin Bandage For Epidermal Protection And Recovery, Michael David Paskett

Undergraduate Honors Capstone Projects

Spider silk is one of nature's most promising biomaterial s for a variety of applications, however, due to the inability to farm spiders, transgenic hosts are required for large-scale production. With the unique combination of strength, elasticity, and biocompatibility, spider silk has an incredible potential for use in the human body. This study was conducted to merge two major applications of spider silk for the creation of a novel bandaging product. Electrospinning technology was utilized to create a spider silk/polymer bandage matrix to be applied with an aqueous spider silk skin adhesive.

In designing the bandaging matrix , the mechanical …

Amending Phb With Algal Biomass To Enhance Biodegradability, Amanda R. Stoudt

Undergraduate Honors Capstone Projects

Pollution due to petroleum-based plastic is a growing problem all over the world. Petroleum-based plastics that fill landfills and oceans take hundreds of years to degrade. One possible solution to this growing problem is to increase the use of bioplastics. Polyhydroxybutyrate (PHB) is a widely studied bioplastic that is biodegradable in both soil and marine environments. However, PHB use is limited due to its poor mechanical properties. Past researchers have investigated the use of natural additives, primarily different types of plant fibers, to enhance both the mechanical properties and degradation rates of bioplastics. The purpose of this project was to …

Memcapacitive Devices In Logic And Crossbar Applications, Dat Tran, Christof Teuscher

Electrical and Computer Engineering Faculty Publications and Presentations

Over the last decade, memristive devices have been widely adopted in computing for various conventional and unconventional applications. While the integration density, memory property, and nonlinear characteristics have many benefits, reducing the energy consumption is limited by the resistive nature of the devices. Memcapacitors would address that limitation while still having all the benefits of memristors. Recent work has shown that with adjusted parameters during the fabrication process, a metal-oxide device can indeed exhibit a memcapacitive behavior. We introduce novel memcapacitive logic gates and memcapacitive crossbar classifiers as a proof of concept that such applications can outperform memristor-based architectures. The …

The Effectiveness Of Sanitary Inspections As A Risk Assessment Tool For Thermotolerant Coliform Bacteria Contamination Of Rural Drinking Water: A Review Of Data From West Bengal, India, Christian Snoad, Corey L. Nagel, Animesh Bhattacharya, Evan A. Thomas

Mechanical and Materials Engineering Faculty Publications and Presentations

The use of sanitary inspections combined with periodic water quality testing has been recommended in some cases as screening tools for fecal contamination. We conducted sanitary inspections and tested for thermotolerant coliforms (TTCs), a fecal indicator bacteria, among 7,317 unique water sources in West Bengal, India. Our results indicate that the sanitary inspection score has poor ability to identify TTC-contaminated sources. Among deep and shallow hand pumps, the area under curve (AUC) for prediction of TTC > 0 was 0.58 (95% confidence interval [CI] = 0.53–0.61) and 0.58 (95% CI = 0.54–0.62), respectively, indicating that the sanitary inspection score was only …

Development And Training Of A Neural Controller For Hind Leg Walking In A Dog Robot, Alexander J. Hunt, Nicholas Szczecinski, Roger Quinn

Mechanical and Materials Engineering Faculty Publications and Presentations

Animals dynamically adapt to varying terrain and small perturbations with remarkable ease. These adaptations arise from complex interactions between the environment and biomechanical and neural components of the animal’s body and nervous system. Research into mammalian locomotion has resulted in several neural and neuro-mechanical models, some of which have been tested in simulation, but few “synthetic nervous systems” have been implemented in physical hardware models of animal systems. One reason is that the implementation into a physical system is not straightforward. For example, it is difficult to make robotic actuators and sensors that model those in the animal. Therefore, even …

Optimizing Control Of Shell Eco-Marathon Prototype Vehicle To Minimize Fuel Consumption, Chad Louis Bickel

Master's Theses

Every year the automotive industry strives to increase fuel efficiency in vehicles. When most vehicles are designed, fuel efficiency cannot always come first. The Shell Eco-marathon changes that by challenging students everywhere to develop the most fuel-efficient vehicle possible. There are many different factors that affect fuel efficiency, and different teams focus on different vehicle parameters. Currently, there is no straightforward design tool that can be used to help in Shell Eco-marathon vehicle design. For this reason, it is difficult to optimize every vehicle parameter for maximum fuel efficiency.

In this study, a simulation is developed by using basic vehicle …

Cirrus Cloud Microphysics Over Darwin, Australia, Dorothea Ivanova, Matthew Johnson

Publications

Ice clouds, crucial to the understanding of both short - and long - term climate trends, are poorly represented in global climate models (GCMs). Cirrus clouds, one of the largest uncertainties in the global radiation budget, have been inadequately studied at low latitudes. Parameterizations exist for mid - latitude and tropical cirrus ( Ivanova et al. 2001; McFarquhar et al. 1997). Due to climate sensitivity in the GCM with respect to cloud input, without robust parameterizations of cirrus clouds, the GCM is inaccurate over most output fields, including radiative forcing, temperature, albedo, and heat flux (Yao and Del Genio 1999). …

An Efficient And Cost Effective Fpga Based Implementation Of The Viola-Jones Face Detection Algorithm, Peter Irgens, Curtis Bader, Theresa Lé, Devansh Saxena, Cristinel Ababei

Electrical and Computer Engineering Faculty Research and Publications

We present an field programmable gate arrays (FPGA) based implementation of the popular Viola-Jones face detection algorithm, which is an essential building block in many applications such as video surveillance and tracking. Our implementation is a complete system level hardware design described in a hardware description language and validated on the affordable DE2-115 evaluation board. Our primary objective is to study the achievable performance with a low-end FPGA chip based implementation. In addition, we release to the public domain the entire project. We hope that this will enable other researchers to easily replicate and compare their results to ours and …

Development Of Prognostic Techniques For Surface Defect Growth In Railroad Bearing Rolling Elements, Nancy De Los Santos, Robert Jones, Constantine Tarawneh, Arturo A. Fuentes, Anthony Villarreal

Mechanical Engineering Faculty Publications

Prevention of bearing failures which may lead to catastrophic derailment is a major safety concern for the railroad industry. Advances in bearing condition monitoring hold the promise of early detection of bearing defects, which will improve system reliability by permitting early replacement of failing components. However, to minimize disruption to operations while providing the maximum level of accident prevention that early detection affords, it will be necessary to understand the defect growth process and try to quantify the growth speed to permit economical, non-disruptive replacement of failing components rather than relying on immediate removal upon detection. The study presented here …

Fast And Accurate Sparse Coding Of Visual Stimuli With A Simple, Ultra-Low-Energy Spiking Architecture, Walt Woods, Christof Teuscher

Electrical and Computer Engineering Faculty Publications and Presentations

Memristive crossbars have become a popular means for realizing unsupervised and supervised learning techniques. Often, to preserve mathematical rigor, the crossbar itself is separated from the neuron capacitors. In this work, we sought to simplify the design, removing extraneous components to consume significantly lower power at a minimal cost of accuracy. This work provides derivations for the design of such a network, named the Simple Spiking Locally Competitive Algorithm, or SSLCA, as well as CMOS designs and results on the CIFAR and MNIST datasets. Compared to a non-spiking model which scored 33% on CIFAR-10 with a single-layer classifier, this hardware …

Physiologically-Aware Communication Architecture For Transmission Of Biomedical Signals In Basns For Emerging Iot Applications, Jose Santos, Dongming Peng, Hamid Sharif

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This research work proposes a novel physiologicallyaware communication architecture for the transmission of biomedical signals in BASNs (Body Area Sensor Networks) and wearables for emerging IoT applications. The architecture to fulfill the following objectives:

• Reduce volume of biomedical data in IoT networks and Internet infrastructure.

• Minimize the required computational load of biomedical data on the cloud side.

• Extend the lifetime of the mobile wearable/BASN through improved energy savings.

This architecture is generalizable to class of biomedical signals. It prevents large volume of biomedical data to be generated; uses patient state to control almost any system parameter; achieves …

Reducing Graphene–Metal Contact Resistance Via Laser Nano-Welding, Kamran Keramatnejad, H. Rabiee Golgir, Y. S. Zhou, D. W. Li, X. Huang, Yongfeng Lu

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The large graphene-metal contact resistance is a major limitation for development of graphene electronics. graphene behaves as an insulator for out-of-plane carrier transport to metallic contacts.

Laser nano-welding was developed and led to RC reductions of up to 84%.

Localized laser irradiation at the edges of graphene led to the formation of chemically active point defects.

Precise structural modifications and formation of G-M bonding led to improved carrier efficiency in graphene devices.

Biotemplating Pores With Size And Shape Diversity For Li-Oxygen Battery Cathodes, Dahyun Oh, Cagla Ozgit-Akgun, Esin Akca, Leslie Thompson, Loza Tadesse, Ho-Cheol Kim, Gökhan Demirci, Robert Miller

Faculty Publications

Synthetic porogens provide an easy way to create porous structures, but their usage is limited due to synthetic difficulties, process complexities and prohibitive costs. Here we investigate the use of bacteria, sustainable and naturally abundant materials, as a pore template. The bacteria require no chemical synthesis, come in variable sizes and shapes, degrade easier and are approximately a million times cheaper than conventional porogens. We fabricate free standing porous multiwalled carbon nanotube (MWCNT) films using cultured, harmless bacteria as porogens, and demonstrate substantial Li-oxygen battery performance improvement by porosity control. Pore volume as well as shape in the cathodes were …

Multi-Valued Sequences Generated By Power Residue Symbols Over Odd Characteristic Fields, Begum Nasima, Yasuyuki Nogami, Satoshi Uehara, Robert Morelos-Zaragoza

Faculty Publications

This paper proposes a new approach for generating pseudo random multi-valued (including binary-valued) sequences. The approach uses a primitive polynomial over an odd characteristic prime field $\f{p}$, where p is an odd prime number. Then, for the maximum length sequence of vectors generated by the primitive polynomial, the trace function is used for mapping these vectors to scalars as elements in the prime field. Power residue symbol (Legendre symbol in binary case) is applied to translate the scalars to k-value scalars, where k is a prime factor of p-1. Finally, a pseudo random k-value sequence is obtained. Some important properties …

Pythagorean Approximations For Lego: Merging Educational Robot Construction With Programming And Data Analysis, Ronald I. Greenberg

Computer Science: Faculty Publications and Other Works

Abstract. This paper can be used in two ways. It can provide reference information for incorporating diagonal elements (for bracing or gear meshing) in educational robots built from standard LEGO kits. Alternatively, it can be used as the basis for an assignment for high school or college students to recreate this information; in the process, students will exercise skills in both computer programming and data analysis. Using the paper in the second way can be an excellent integrative experience to add to an existing course; for example, the Exploring Computer Science high school curriculum concludes with the units “Introduction to …

Chitosan Nanoparticle Modifications For Improved Gene Delivery In An Oral Dna Vaccine Application, Austin Helmink

Honors Program: Senior Projects (Public)

Vaccines represent one of the most significant medical innovations of the 20^th century, resulting in the eradication or near eradication of a handful of deadly diseases. However, many infectious diseases remain resistant to effective vaccination, largely due to a lack full immune activation by traditional protein-based vaccines. A promising alternative vaccination strategy is the emerging development of DNA vaccines, which rely upon the delivery of exogenous genetic material to host cells encoding for a viral or bacterial antigen in order to induce a robust immune response by closely mimicking live infection. The delivery of genetic material requires a carrier …

Impact-Resistant Behavior Of Reinforced Concrete Bridge Columns, Chen Fang

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The damage caused by a vehicle collision on a pier column can be catastrophic for the functionality of a bridge, even a total collapse of the bridge. ❖ A vehicle collision and a subsequent vehicle blast cause more damages on the bridge. ❖ Limited researches have been conducted to investigate the behavior of the bridge subjected to the combined effect of vehicle collision and blast. ❖ It is necessary to analyze the responses of the bridge under the vehicle collision and blast and provide some design suggestions to strengthen the bridge.

Conclusions ❖ The finite element models including column, pile …

Optimizing Steel Railway Truss Bridge Health Monitoring, Ahmed Rageh, Daniel Linzell

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Problems - Steel Railway Trusses • Aging • Large system – bridge AND railway • Labor intensive condition eval • Reported conditions: Stringer-to-floor beam connections [Haghani 2012] Stringer flange clip angle cracks [Haghani 2012] Unequal eyebars stress distribution [DelGrego 2008] Displaced eyebar pins [DelGrego 2008

Problems – Condition Evaluation • Visual inspection: Prescribed frequency Costly Subjected to human interpretation • Sensors: Focused on a single bridge Extensive array Costly