Engineering Commons^™

Numerical Study Of Droplet Evaporation, Ritul Gandhi

Mechanical and Aerospace Engineering Theses - Archive

Droplet evaporation plays a vital role in various engineering fields such as air/fuel premixing, inkjet printing and many more. The high rate of power dissipation from the integrated circuits and chips of electronic devices creates a need for cooling it to achieve their optimal functionality. The high rate of cooling can be achieved by thin film evaporation of water by phase change as compared to the air cooling methods. Therefore, the study of droplet evaporation is necessary to understand the underlying physics and effects of different parameters on cooling performance. Numerical study of droplet evaporation has been done by using …

Dc-To-Dc Buck Converter, Kyle Christopher Roman

Electrical Engineering

The growth of sustainable energy requires many components to work in harmony creating one efficient and effective system. Sustainable energy generation that produces a DC current varying in voltage requires a subsystem to convert voltage to a practical and usable value. The DC to DC Buck converter converts high DC solar generated voltage to a 12V output. This Modular -Level power electronic (MLPE) device performs as a solar charge controller for small lithium ion batteries. Fluctuating voltage levels generated by Photovoltaic cells makes the solar controller a critical part of the solar system. Regulating the DC voltage allows safe and …

Dual Method Headphone Amplifier, Joseph S. Gross, Timothy P. Murphy

Electrical Engineering

Many high impedance headphones underperform their full potential when directly connected to the audio source. Amplifiers boost the audio signal and provide the headphones with sufficient power to ensure their maximum performance. The invention of transistors caused vacuum tube implementation to decline, leaving many audiophiles unsatisfied with the transistor’s sound signature. Vacuum tubes and transistors both amplify signals, however the distinct “tube sound” has vanished.

We have designed and created a product where the user selectively switches between solid-state transistor and tube amplification to compare the sound signatures of each amplification method. The ability to switch between the solid-state and …

A Study Of Manganese And Cobalt Incorporated Nickel Oxide Based Core-Shell Magnetic Nanoparticles, Samiul Hasan

Graduate Theses/Dissertations

The synthesis along with the structural and magnetic properties of manganese (Mn) and cobalt (Co) -incorporated nickel oxide (NiO) inverted core-shell nanoparticles (CSNs) were investigated. The primary objective of this study was to determine the effect of substitution of nickel (Ni) by transition metal ions (Mn²⁺/Co²⁺) in affecting the magnetic properties of the resultant CSNs. The core of the CSNs is comprised of NiO and the shell constitutes a Ni_x(Mn/Co)_1-xO phase. The synthesis of the CSNs was accomplished in two steps: first, NiO nanoparticles were synthesized using a thermal decomposition method. In …

Block Copolymer Nanostructures For Inorganic Oxide Nanopatterning, Krishna Pandey

Graduate Theses/Dissertations

Self-assembled nature of block copolymer (BCP) makes them ideal for emerging technologies in nanometer scale. The micro phase separation between two or more dissimilar polymer blocks of BCP leads to uniform periodic nanostructures of different domains of dimension in the range of 5-100 nm, good for the development of emerging microelectronic and optoelectronics devices. Molecular weight and chain architecture of each blocks govern the morphology evolution; gives different structure like spherical, micelles, lamellae, cylindrical, gyroid etc. The morphology evolution of BCP nanostructure also depends on different external factors as well. In the first work of this thesis, three external factors …

Monitoring And Anticipating The Convergence Of Lighting Control Strategies, Nina Chaichi, Tugrul Unsal Daim

Engineering and Technology Management Faculty Publications and Presentations

IPC co-classification in conjunction with cross impact analysis has been used to identify technology convergence and its strength over specific period of time. In this study, we tried to monitor the convergence of lighting control strategies which yields energy efficiency from 2009 to 2013. Also, we tried to anticipate the trend of impacts for near future. We take new approach to utilize detailed information including rate of change of co-classified patents, number of patents in each class, and convergence strength between two classes over time and build possible scenarios to anticipate the convergence trend. In our new approach, convergence strength …

Improving The Effectiveness Of Fuzzy Front End Management: Expanding Stage-Gate Methodologies Through Agile, Aruna Bhatia, Juchun Cheng, Sadaf Salek, Vidhi Chokshi, Antonie J. Jetter

Engineering and Technology Management Faculty Publications and Presentations

More now than ever before, product development has become more challenging and complex with all the globalization around business today. Understanding the requirements of unfamiliar markets can be very challenging for organizations trying to speed-up their innovations. Also with the advent of globalization there is pressure on everyone to perform better and roll out new products in the market. The fuzzy front end process is very dynamic and unstructured process. By taking advantage of the key characteristics of Agile and Stage-Gate model, an Integrated Agile- Stage- Gate Hybrid model was developed which could help in improving the effectiveness of the …

Measurement Of Peptoid Concentration Using Uv Spectroscopy, Katie Holland

Chemical Engineering Undergraduate Honors Theses

The goal of this research is to establish a relationship between ultraviolet adsorption and peptiod concentration to be used to determine the concentration of an unknown peptoid sample. This will allow for the measurement of concentration differences of peptoid samples before and after incubation with membrane surfaces. Samples were prepared nine know concentrations and diluted 50 fold. The UV absorbances of each sample was measured using a UV spectrophotometer at wavelengths from 200 to 450 nanometers. This process was repeated, and the maximum absorbance of each replicate was averaged to yield an absorbance value for each concentration of peptoid. …

Optimized Thruster Allocation Utilizing Dual Quaternions For The Asteroid Sample Return Mission (Osiris-Rex), Asher Smith

Doctoral Dissertations and Master's Theses

As spacecraft require higher positional accuracy from the attitude control systems, new algorithm developments, along with sensor and actuator resolution and range improvements are necessary to achieve the desired science accuracies. For agile 6-Degrees of freedom (6-DOF) spacecraft with redundancy, the actuators are usually oversized or overpopulated to meet the desired slew requirements. Currently, most spacecraft utilize an over-actuated thruster system to produce 6-DOF control. This thesis presents a simulation of the OSIRIS-REx mission during the descent phase to the asteroid Bennu, with a focus on utilizing dual quaternion dynamics and a newly developed thruster allocation method. The dual quaternion …

Low-Cost Wearable Head-Up Display For Flight General Aviation, Pavan K. Chinta

Doctoral Dissertations and Master's Theses

A low-cost wearable Commercial-off-The-Shelf (COTS) Augmented Reality (AR) Head-Up Display (HUD) system is designed, successfully reduced to practice, and flight tested. The system is developed based on the need for a technology that improves loss-of-control (LOC) safety in the General Aviation (GA) sector. The accuracy of the flight-path based system is determined to be within a degree of the truth source. The repeatability of the data from the COTS system is excellent. A complementary filter is proposed for air data flow angles and successfully flight tested for straight and level flight, dynamic maneuvering, and atmospheric turbulence, provided that a reasonably …

Mechanical And Electrical Characterization Of Carbon Fiber/Bucky Paper/Zinc Oxide Hybrid Composites, Suma Ayyagari

Doctoral Dissertations and Master's Theses

The quest for multifunctional carbon fiber reinforced composites (CFRPs) expedited the use of several nano reinforcements such as zinc oxide nanorods (ZnO) and carbon nanotubes (CNTs). Zinc oxide is semi-conductor with good piezoelectric and pyroelectric properties. These properties could be transmitted to CFRPs when a nanophase of ZnO is embedded within CFRPs. In lieu of ZnO nanorods, Bucky paper comprising mat of multiwall-carbon nanotubes (MWCNTs) could be sandwiched in-between laminae to construct a functionally graded composite with elevated electrical and thermal conductivities. In this study, a low temperature ( 90_C) hydrothermal synthesis method was utilized to grow ZnO nanorods on …

Computational Investigation Of The Biomechanics Of Babywearing In Regards To Developmental Dysplasia Of The Hip, Gaurav Girish

Doctoral Dissertations and Master's Theses

Developmental Dysplasia of the Hip (DDH) is a congenital condition where an infant’s hip socket is either loose or otherwise unstable. DDH causes a joint instability where the femoral head is not properly situated inside the acetabulum. Etiology of the condition is in part congenital and developmental, with a difference of DDH prevalence between ethnicities. Incidence of DDH is also in some part dependent on cultural practices and activities of the mother and child. The exact nature of this cultural incidence is not clearly understood. A computational approach is hypothesized to identify the impact of babywearing position on the healthy …

Aviation Propulsive Lithium-Ion Battery Packs State-Of-Charge And State-Of-Health Estimations And Propulsive Battery System Weight Analysis, Jingsi Lilly

Doctoral Dissertations and Master's Theses

Aviation propulsive battery pack research is in high demand with the development of electric and hybrid aircraft. Accurate inflight state-of-charge and state-of-health estimations of aviation battery packs still remain challenging. This thesis puts efforts on estimating the state-of-charge, state-of-health, and remaining energy of a lithium- ion propulsive battery pack with a recursive least squares based adaptive estimator. By reading the system measurements (discharging currents and terminal voltages) with persistent excitation, the proposed estimator can determine the present internal parameters of the battery cells and further interpolate them into state-of-charge, state-of-health, and the remaining energy information. The validation results indicate that …

Aerodynamic And Performance Analysis Of A Morphing Helicopter Rotor System, Vinay Gopal Krishnan

Doctoral Dissertations and Master's Theses

The purpose of this study was to investigate the effect of rotor morphing, specifically variable rotor speed and variable blade twist, on various parameters such as the distribution of angle of attack, lift, power, thrust and/or other metrics describing the performance of a helicopter rotor. A MATLAB based blade element theory model was developed and executed for different flight conditions. The model was validated against the flight test data of a UH-60. Effects on power, lift to drag ratio and rotor drag from variations in blade twist, rotor speed, rotor radius and blade chord was analyzed. Morphing cases were applied …

Design Of Flight Control Laws For A Novel Stratospheric Dual-Aircraft Platform, Cindy Nshuti

Doctoral Dissertations and Master's Theses

Dual-aircraft platform (DAP) is a novel concept that features two glider-like unmanned aerial systems (UAS) tethered via a thin adjustable cable allowing them to sail back-and-forth, without propulsion, using vertical wind shear. DAP offers the potential of a low-cost atmospheric satellite. This thesis presents the results of an initiative to demonstrate this novel flight concept through modeling, simulation, and flight testing at Embry-Riddle Aeronautical University (ERAU). A realistic simulation environment, described herein, was developed to support the development and testing of flight control systems. This environment includes nonlinear aerodynamic models for the aircraft, a multi-element cable dynamics model, propeller-motor thrust …

A Study On The Control, Dynamics, And Hardware Of Micro Aerial Biomimetic Flapping Wing Vehicles, Siara Hunt

Doctoral Dissertations and Master's Theses

Biological flight encapsulates 400 million years of evolutionary ingenuity and thus is the most efficient way to fly. If an engineering pursuit is not adhering to biomimetic inspiration, then it is probably not the most efficient design. An aircraft that is inspired by bird or other biological modes of flight is called an ornithopter and is the original design of the first airplanes. Flapping wings hold much engineering promise with the potential to produce lift and thrust simultaneously. In this research, modeling and simulation of a flapping wing vehicle is generated. The purpose of this research is to develop a …

Museum Wave Tank Design, David James Streng, Lisa Michelle Dischinger, John Frederick Niemoller

Mechanical Engineering

The Santa Maria Discovery Museum would like to add a tsunami wave tank to be one of their demonstrations. The wave tank needs to draw the attention of their young crowd and be educationally informative about the shapes and effects of waves. As this is a museum demonstration for children, the structure, user interface, and wave making mechanism must be durable.

We are a senior project team from California Polytechnic State University that worked on this project with Allan Hancock College and Stanford University. We created waves by rapidly moving a plunger vertically in the water column. This project allows …

Fatigue Impacts On Hdpe Pipe Material Properties, Marjan Shahrokh Esfahani

Civil Engineering Dissertations - Archive

During a pipe’s life cycle, failures occur due to numerous factors such as age, loading conditions, environmental conditions, installation quality, manufacturing procedures, operation and maintenance strategies and so on. Frequent pressure surges or fluctuations in a piping system may cause a fatigue failure as fatigue is one of the most important issues in water pipes due to water hammer impacts. Application of buried High Density PolyEthylene (HDPE) water pipelines has significantly increased in recent years, and PE4710 is a new member of HDPE family. So, there is not yet enough information about PE4710 long-term performance. Due to lack of enough …

Aermod Modeling Of Air Pollutant Emissions From Backup Generator Use In Lagos, Nigeria, Temitope Abayomi

Civil Engineering Theses - Archive

Generator emissions contribute to increase in air pollution. In developing countries with inadequate electricity supply, many people rely on back-up generators for long-term electricity supply. Nigeria is the second biggest importer of generators in Africa. As of 2009, it was estimated that 60 million people in Nigeria owned and operated small to medium size generators to provide electricity for their daily use. The sheer number of generators in use suggests that generator emissions are a significant source of air pollution in the country, particularly in urban cities. In this work, the concentrations of pollutants emitted from 50 generators in a …

Seismic Performance Of Double-Channel And Double-Hss Sections, Special Truss Moment Frame With Buckling Restrained Braces, And Long Span Special Truss Moment Frame, Chatchai Jiansinlapadamrong

Civil Engineering Dissertations - Archive

Until recently, all special truss moment frame (STMF) experimental research was done on only double angle STMFs. In order to satisfy the code seismic drift limitation, especially for mid-rise and tall multistory buildings, a large column section is needed, when double angle sections are used. However, heavy chord members can be used in this instance. Due to configuration of STMFs, the chord members in the special segment of an STMF experience higher rotational demand than the story drift. As a result, there is a need to verify large rotational capacity of other heavy steel shapes. Recent analytical investigation and experimental …

A Risk-Based Method For Estimating The Carbon Sequestration Budget For A Mixed Hardwood Forest, Erin Cooper

Chemical Engineering Undergraduate Honors Theses

Carbon Dioxide (CO₂) levels in the atmosphere have risen from approximately 310 ppm in the 1950’s to over 400 ppm as of 2015. This rise in CO₂ has likely resulted in the observed warming trend of the earth’s atmosphere in the same time frame, causing significant concern in the scientific community. Several mitigation strategies have arisen to combat the upward trend of CO₂ emissions in recent decades, among them being carbon sequestration- the process of capturing CO₂ from the atmosphere and holding it for an extended period of time. This study used the U.S. Forest …

Mppt Control For Solar Splash Photovoltaic Array, Kelsey Zenko

Mechanical Engineering Undergraduate Honors Theses

This thesis demonstrates the ability to model and simulate the operation of Maximum Power Point Tracking, MPPT. Moreover, the MPPT technology is contextualized within the confines of the Solar Splash competition to provide the foundation for future model development and simulation for optimal competition performance. MatLab Simulink was used to model the solar panel's operation. A MPPT algorithm was written using the perturb and observe method and was implemented in the model using a buck DC to DC converter. The performance of the model with hardware in the loop using Typhoon and dSPACE, which demonstrated how the actual hardware would …

Effectiveness Of Chain Link Turtle Fence And Culverts In Reducing Turtle Mortality And Providing Connectivity Along U.S. Hwy 83, Valentine National Wildlife Refuge, Nebraska, Usa, Marcel P. Huijser, Kari E. Gunson, Elizabeth R. Fairbank

Nebraska Department of Transportation: Research Reports

We evaluated the effectiveness of existing turtle fences through collecting and analyzing turtle mortality data along U.S. Hwy 83, in and around Valentine National Wildlife Refuge, Nebraska, USA. We also investigated the level of connectivity for turtles provided through the culverts that were originally designed to pass water through a capture-mark-recapture experiment. While fenced valley sections had 33.1% fewer turtle observations than unfenced valley sections, the difference was not significant. However, we think that the effectiveness of the fence can be improved through fence repairs, other modifications of the fences, vegetation maintenance, and extending the length of the fences. Four …

Structural And Elastic Properties Of Degenerate Sno Monolayers At Finite Temperature, Afsana Sharmin

Graduate Theses and Dissertations

Chalcogen-based layered superconductors with a litharge structure such as FeS and FeSe mono-layers undergo structural and superconducting phase transitions that are tunable by doping. Representing another material platform with a litharge structure but without valence d-electrons, SnO monolayers also display a structural ground state with a degenerate rectangular unit cell at zero temperature and a charge-tunable energy barrier that leads to a thermally-controllable structural phase change. Doped SnO monolayers with rectangular degenerate unit cells give rise to two-dimensional multiferroicity. Their two-dimensional elastic energy landscape adopts a basic analytic expression that is employed to discuss this structural transition. The results contained …

Comparison Study Between Post-Fermentation Stillage And Pre-Fermentation Mash Utilizing Acidification And Steam Explosion Techniques For Cellulose Saccharification, Daniel Mckee

Master's Theses

Pre-fermentation mash fiber and post-distillation stillage fiber were examined and compared using a variety of preparatory techniques to determine the better source for cellulose fiber saccharification. Once screened, dried, and diluted to a 10% solution, mash fiber and stillage fiber were exposed to increasing temperatures for steam explosion techniques as well as increasing acidification techniques. Both underwent enzymatic saccharification to convert the exposed cellulose to glucose and other sugars. Once the optimum steam explosion technique parameters and acidification parameters were determined to be 2.5% sulfuric acid at 127.8°C for 1 hour, a comparison of the saccharification of pre-fermentation mash fiber …

Development Of Wo3 Nanostructure By Acid Treatment And Annealing, T Sanasi, S Pinitsoontorn, M Horprathum, P Eiamchai, C Chananonnawathorn, W Hincheeranun

Journal of Metals, Materials and Minerals

Tungsten oxide (WO3) nanostructure is an interesting material for many applications such as batteries, gas sensors, photocatalysts, display utilizing, and smart windows. In this work, we fabricated the WO3 nanoplates by sputtering, acid treatment and annealing. Firstly, a tungsten film was deposited on a silicon or glass substrate by sputtering. The film was then immersed in nitric acid (HNO3) at 80 °C. The effect of the exposure time, and annealing temperature was investigated. After the acid treatment, the tungsten oxide hydrate or tungstile (WO3•H2O) with nanoplate structure was developed. The optical transmittance in the visible range was significantly improved compared …

Properties Of Natural Rubber Latex Filled With Bacterial Cellulose Produced From Pineapple Peels, T Saowapark, E Chaichana, A Jaturapiree

Journal of Metals, Materials and Minerals

Bacterial cellulose (BC) is natural biopolymers with unique properties such as high purity and high tensile strength. These properties considerably support for use as filler in rubber applications. In this research, BC was produced from fermentation by Acetobacter xylinum. Additionally, pineapple peels (agricultural waste) were evaluated for carbon sources in BC's production process. Natural rubber latex (NRL) compound was then incorporated BC with various loadings of 0, 5, 10 and 15 phr (parts per hundred of rubber) for enhancement properties of NRL. Furthermore, NRL filled with BC (NRL-BC) compounds were prevulcanized at 70°C for 2 hours and then NRL-BC sheets …

Thermal-Fluid Dynamic Model Of Luge Steels, Brandon Stell

Master's Theses

Luge is an Olympic sport in which athletes ride feet-first on sleds down an ice-covered track. Competitors spring from the starting position and accelerate their sled by paddling with spiked gloves against the ice surface. Once the Luger leaves the starting section, their downhill motion is solely propelled by the effects of gravity. Athletes compete, one after the other, for the fastest time. Runs can differ by as little as a thousandth of a second, meaning that every minor sled adjustment, change of line choice, and shift of body position is critical. In the past, the sport of Luge has …

The Role Of Soil Stiffness In Reverse Fault Rupture Propagation, Moises I. Buelna

Master's Theses

A nonlinear Mohr-Coulomb constitutive model with a strain dependent yield surface and non-associated flow was employed to study the plastic soil properties which affect the rate of surface fault rupture propagation in reverse events. These numerical simulations show a trend for soils with higher stiffness to have a higher rate of rupture propagation. Additionally the study shows the effects of strain softening and hardening on the rate of rupture propagation. Soils which strain harden exhibiting ductile behavior typically require more basal offset to rupture to the surface than soils which strain soften exhibiting brittle behavior. These results agree with our …

Manufacturing And Instrumentation Of An Open End Compressed Air Shock Tube, Josue O. Ruiz

Master's Theses

Shock tubes have been used extensively to study shock wave structures and high speed flow features. The purpose of constructing this open end shock tube was to have the ability to produce shock waves in a laboratory setting but also understand the exit flow coming out which can be applied to future studies that are beyond the scope of this work. This undertaking would require that an open end shock tube be built and instrumented with PCB Integrated Circuit Piezoelectric (ICP) Pressure Sensor Model 113B24 that would then be connected to a PCB Model 482C05 Signal Conditioner with the purpose …