Engineering Commons^™

Rethinking The Design Of Low-Cost Point-Of-Care Diagnostic Devices, Faith W. Kimani, Samuel M. Mwangi, Benjamin J. Kwasa, Abdi M. Kusow, Benjamin K. Ngugi, Jiahao Chen, Xinyu Liu, Rebecca Cademartiri, Martin M. Thuo

Engineering Management and Systems Engineering Faculty Research & Creative Works

Reducing the global diseases burden requires effective diagnosis and treatment. In the developing world, accurate diagnosis can be the most expensive and time-consuming aspect of health care. Healthcare cost can, however, be reduced by use of affordable rapid diagnostic tests (RDTs). In the developed world, low-cost RDTs are being developed in many research laboratories; however, they are not being equally adopted in the developing countries. This disconnect points to a gap in the design philosophy, where parameterization of design variables ignores the most critical component of the system, the point-of-use stakeholders (e.g., doctors, nurses and patients). Herein, we demonstrated that …

Precoder Design For Simultaneous Wireless Information And Power Transfer Systems With Finite-Alphabet Inputs, Xiaodong Zhu, Weiliang Zeng, Chengshan Xiao

Electrical and Computer Engineering Faculty Research & Creative Works

Existing research on a simultaneous wireless information and power transfer (SWIPT) system is based on the assumption of Gaussian inputs. However, the optimal design on Gaussian inputs may lead to dramatic performance loss for practical systems with finite-Alphabet inputs. This paper focuses on the precoder design for a SWIPT system with finite-Alphabet inputs and instantaneous channel state information over a multiple-input multiple-output channel. We formulate the optimal precoder design as an optimization problem, in which the objective is to maximize the mutual information over the channel from the transmitter to the information receiver under the constraints of transmit power and …

Convolutional Neural Network Based Localized Classification Of Uterine Cervical Cancer Digital Histology Images, Haidar A. Almubarak, R. Joe Stanley, Rodney Long, Sameer Antani, George Thoma, Rosemary Zuna, Shelliane R. Frazier

Electrical and Computer Engineering Faculty Research & Creative Works

In previous research, we introduced an automated localized, fusion-based algorithm to classify squamous epithelium into Normal, CIN1, CIN2, and CIN3 grades of cervical intraepithelial neoplasia (CIN). The approach partitioned the epithelium into 10 segments. Image processing and machine vision algorithms were used to extract features from each segment. The features were then used to classify the segment and the result was fused to classify the whole epithelium. This research extends the previous research by dividing each of the 10 segments into 3 parts and uses a convolutional neural network to classify the 3 parts. The result is then fused to …

Developing Ict Skills Of Stem Teachers In Mexico: The Key Role Of The Tutorial Function, Alexander N. Chen, David Mccalman, Mark E. Mcmurtrey, J. Gabriel Domínguez Castillo, Víctor Manuel Cab Pech

Journal of International Technology and Information Management

It is well documented in distance education literature that one of the factors that are considered essential to the success of an online course is the tutorial function. The role of counselor consists of assisting and encouraging students, building learning activities, and developing support strategies for the use of technology. The tutor thus was assessed as one element of great importance in on-line education, and, to some, an essential feature of this mode. In this paper, the importance of the tutorial function and its effect on the development of skills for using information and communication technology (ICT) in science, technology, …

Safety Concepts For Workers From An Osha Perspective, Zamaan Al-Shabbani, Roy E. Sturgill Jr., Gabriel B. Dadi

Kentucky Transportation Center Research Report

Highway construction and maintenance workers face numerous hazards on job sites, many of which are unique by industry standards. Despite the exposure of state transportation agency employees and contractors to these hazards, there are few safety standards, regulations, programs that directly target the sector aimed at prevention and mitigation. To help the Kentucky Transportation Cabinet (KYTC) improve employee safety, researchers at the Kentucky Transportation Center (KTC) analyzed the frequency and causes of workplace injuries for 10 essential Cabinet maintenance operations. Most incidents were attributable to human factors or ergonomics. Based on this analysis, the leading causes of incidents, and a …

Activation Of The Phospholipid Scramblase Tmem16f By Nanosecond Pulsed Electric Field (Nspef) Facilitates Its Diverse Cytophysiological Effects, Claudia Muratori, Andrei G. Pakhomov, Elena Gianulis, Jade Meads, Maura Casciola, Peter A. Mollica, Olga N. Pakhomova

Bioelectrics Publications

Nanosecond pulsed electric fields (nsPEF) are emerging as a novel modality for cell stimulation and tissue ablation. However, the downstream protein effectors responsible for nsPEF bioeffects remain to be established. Here we demonstrate that nsPEF activate TMEM16F (or Anoctamin 6), a protein functioning as a Ca²⁺-dependent phospholipid scramblase and Ca²⁺-activated chloride channel. Using confocal microscopy and patch clamp recordings, we investigated the relevance of TMEM16F activation for several bioeffects triggered by nsPEF, including phosphatidylserine (PS) externalization, nanopore-conducted currents, membrane blebbing, and cell death. In HEK 293 cells treated with a single 300-ns pulse of 25.5 kV/cm, …

Understanding Sanitation Preferences: An Exploratory Study In The Sirohi District Of Rajasthan, Karen Mac

Independent Study Project (ISP) Collection

Of all the countries in the world, India has the highest number of people practicing open defecation, causing adverse health outcomes from the unconfined spread of faecal matter. The Government of India is ambitiously aiming to end this practice through the construction of 12 million toilets by 2019, but historically, many toilets across India have gone unused. This study focused on understanding: (1) the reasons why people continue to openly defecate despite having toilets and (2) the requirements of a toilet that rural households would be willing to use. Along with 36 observations of household toilets, semi-structured group (n=8) and …

Optimization Of The Hot Embossing Parameters And Sintering Characterization For Alumina/Berea Sandstone Ceramics, Justin F. Robbins

Faculty Publications

The purpose of this study is to investigate the process of hot embossing on alumina based ceramics as a cost-efficient procedure for manufacturing microfluidic testing components. Alumina ceramics were used as an exploratory phase for the final objective of the project, manufacturing of Berea sandstone based ceramic samples. These testing components are vital to the growth of various fields ranging from the retrieval of oil and natural gas to studying the water purification process of aquifers. Previous research has shown potential in using hot embossing on Alumina based ceramics; however, complications with extrusion and micro-structure quality were observed. For this …

Computational Modeling For Abnormal Brain Tissue Segmentation, Brain Tumor Tracking, And Grading, Syed Mohammad Shamin Reza

Electrical & Computer Engineering Theses & Dissertations

This dissertation proposes novel texture feature-based computational models for quantitative analysis of abnormal tissues in two neurological disorders: brain tumor and stroke. Brain tumors are the cells with uncontrolled growth in the brain tissues and one of the major causes of death due to cancer. On the other hand, brain strokes occur due to the sudden interruption of the blood supply which damages the normal brain tissues and frequently causes death or persistent disability. Clinical management of these brain tumors and stroke lesions critically depends on robust quantitative analysis using different imaging modalities including Magnetic Resonance (MR) and Digital Pathology …

Effects Of Vacuuming Pervious Concrete On Infiltration Rate, Demetrios E. Maurakis, Eugene G. Maurakis

Virginia Journal of Science

The objectives of this research were twofold: test the infiltration rate of pervious concrete before and after vacuum cleaning and assess infiltration variability over time. Infiltration tests were performed on a 558.2 m2 area of pervious concrete, divided into sixteen 0.35 m2 test areas in a parking area at the Science Museum of Virginia in Richmond, Virginia on five dates from November 4-December 30, 2013. Average infiltration rates (avg.= 22.8 and 36.3 L/m²/min) immediately after vacuuming were lower than those (avg.=30.7 and 41.3 L/m²/min) before vacuuming. We hypothesize that the vacuuming lifted materials towards the surface …

Utilizing Functional Near-Infrared Spectroscopy For Prediction Of Cognitive Workload In Noisy Work Environments, Ryan Gabbard, Mary E. Fendley, Irfaan A. Dar, Rik Warren, Nasser H. Kashou

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Occupational noise frequently occurs in the work environment in military intelligence, surveillance, and reconnaissance operations. This impacts cognitive performance by acting as a stressor, potentially interfering with the analysts’ decision-making process. We investigated the effects of different noise stimuli on analysts’ performance and workload in anomaly detection by simulating a noisy work environment. We utilized functional near-infrared spectroscopy (fNIRS) to quantify oxy-hemoglobin (HbO) and deoxy-hemoglobin concentration changes in the prefrontal cortex (PFC), as well as behavioral measures, which include eye tracking, reaction time, and accuracy rate. We hypothesized that noisy environments would have a negative effect on the participant in …

Optimizing Student Workforce Scheduling At Psu Office Of Information Technology (Oit), Agam Ebramsyah, Aishwarya Joy, Cody Miller, Jake Stevens, Priyanka Patil

Engineering and Technology Management Student Projects

A significant challenge for businesses of any size, is generating a work schedule that ensures adequate personnel coverage to ensure all aspects of the business are properly staffed, while preventing waste produced from having an excess number of employees working at a given time. The decision to manually create spreadsheets and work schedules that take into account availability, staffing requirements, and cost efficiency can become overwhelming and labor intensive. For Portland State University's Office of Information Technology (OIT), there is a significant challenge in scheduling student workers, while ensuring staffing requirements are met, student work hour restrictions are observed, and …

Optimizing Distributed Energy Resources On A Distribution Feeder, Bill Henry, Stephen Macdonald, Nicole Wehner, Gabe Mcbride, Tyler Groth

Engineering and Technology Management Student Projects

The purpose of this study is to optimize a set of distributed energy resources (DERs) on an electric utility distribution level feeder. A DER is a decentralized resource, usually located at end-use electric utility customer sites, that stores or generates electricity – such as batteries and rooftop photovoltaic solar, or in the case of demand response, in which the utility has the ability to manage electricity consumption to the benefit of distribution grid operation. The aggregation and optimization of a set of DERs of disparate operating characteristics, over a period of three years is performed and the methods employed explained. …

Geology Influence In The Slope Stability Analysis By Limit Equilibrium, Finite Elements And Random Finite Elements Methods, Juan Camilo Viviescas, Juan Pablo Osorio

Conference papers

Slope stability analyzes correspond to the evaluation of the safety factors commonly performed through the limit equilibrium and finite element methods. Due to the uncertainty of the geotechnical parameters, different statistical methods have emerged such as the limit equilibrium combined with the Monte Carlo simulation method and the random finite elements, which have been widely accepted in recent years. Normally, these analyzes are not performed taking into account the geological influence on the geotechnical properties, so in this work we proceed with the comparison of several geometrical typologies of slopes for mudflows and a residual soils of the Stock San …

Predicting Adhesive Bond Performance Based On Initial Dielectric Properties, Priyanshu Kumar Banerjee, Muthu Ram Prabhu Elenchezhian, Vamsee Vadlamudi, Rassel Raihan, Kenneth Reifsnider

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

This paper will focus on an approach to study the mechanical as well as the dielectric properties of an adhesive bond. The dielectric testing is done by using Broadband Dielectric Spectroscopy (BbDS), wherein the dielectric characteristics of the material are analyzed in a wide frequency spectrum. The data obtained by this technique are used to demonstrate the charge transport, the combined dipolar fluctuation, and the effects of polarization occurring between the boundaries of materials. The continuous modifications of the dielectric spectra are due to the changes in the electrical and structural interactions between the particles, shapes, and orientations of the …

Optimal Microgrids Placement In Electric Distribution Systems Using Complex Network Framework, Mahmoud Saleh, Yusef Esa, Nwabueze Onuorah, Ahmed Mohamed

Publications and Research

This paper provides a new approach to find the optimal location for Microgrids (MGs) in electric distribution systems using complex network analysis. An optimal location in this paper refers to a location that would result in increased grid resilience, reduced power losses, less line loading, higher voltage stability and secured supply to critical loads during power outage. The criteria used to find the optimal placement of MGs were based on the centrality analysis adopted from complex network theory, the center of mass concept used in physics, and the controlled delivery grid (CDG) concept. An IEEE 30-bus system was used as …

An Empirical Study To Investigate The Effect Of Air Density Changes On The Dsrc Performance, Mostafa El-Said, Vijay Bhuse, Alexander Arendsen

Peer-Reviewed Publications

The primary role of Intelligent Transportation Systems (ITS) system is to implement Advanced Driver Assistance Services (ADAS) such as pedestrian detection, fog detection and collisions avoidance. These services rely on detecting and communicating the environment conditions such as heavy rain or snow with nearby vehicles to improve the driver's visibility. ITS systems rely on DSRC to communicate this information via a Vehicle-to-Vehicle (V2V) or Vehicle-to-Infrastructure (V2I) communications architectures. DSCR performance may be susceptible to environmental changes such as air density, gravitation (gravitational acceleration), air temperature, atmospheric pressure, humidity, and precipitation.

The goal of this research is to investigate whether the …

Vlsj Members Fall 2017, Vlsj Lab, Mechanical Engineering Department, Georgia Southern University

VLSJ Lab: Members (Archived)

No abstract provided.

The Prospects Of Zinc As A Structural Material For Biodegradable Implants—A Review Paper, Galit Katarivas Levy, Jeremy Goldman, Eli Aghion

Michigan Tech Publications, Part 1

In the last decade, iron and magnesium, both pure and alloyed, have been extensively studied as potential biodegradable metals for medical applications. However, broad experience with these material systems has uncovered critical limitations in terms of their suitability for clinical applications. Recently, zinc and zinc-based alloys have been proposed as new additions to the list of degradable metals and as promising alternatives to magnesium and iron. The main byproduct of zinc metal corrosion, Zn²⁺, is highly regulated within physiological systems and plays a critical role in numerous fundamental cellular processes. Zn²⁺ released from an implant may suppress …

Elution Tailing Of Nonaqueous Phase Liquids In Porous Media, Louisa Orr

Civil and Environmental Engineering Undergraduate Honors Theses

A variety of porous media were studied to characterize contaminant dispersion over time. This work looked at a compilation of previously published studies to investigate the dependence of long term elution tailing trends on particular soil characteristics. Recession curve analysis was conducted on existing dispersed contaminant literature, to yield the low-concentration recession constant (K). The R² values correlating the soil properties to contaminant concentration ranged from 0.12494 to 0.95429. The low-concentration recession constant (K) values ranged from 0.9745407 0.9999988. The relationship between K and the soil properties porosity, organic carbon, and fines fraction is increasing. Bulk density and the …

Rates And Causes Of Accidents For General Aviation Aircraft Operating In A Mountainous And High Elevation Terrain Environment, Marisa Aguiar, Alan Stolzer, Douglas D. Boyd

Publications

Flying over mountainous and/or high elevation terrain is challenging due to rapidly changeable visibility, gusty/rotor winds and downdrafts and the necessity of terrain avoidance. Herein, general aviation accident rates and mishap cause/factors were determined (2001–2014) for a geographical region characterized by such terrain.

Accidents in single piston engine-powered aircraft for states west of the US continental divide characterized by mountainous terrain and/or high elevation (MEHET) were identified from the NTSB database. MEHET-related-mishaps were defined as satisfying any one, or more, criteria (controlled flight into terrain/obstacles (CFIT), downdrafts, mountain obscuration, wind-shear, gusting winds, whiteout, instrument meteorological conditions; density altitude, dust-devil) cited …

Chemical Variations And Engineering Implications Of Reclaimed Asphalt Pavement And Chemically Modified Asphalt Binders, Md Shahriar Al Alam

Student Theses and Dissertations

Petroleum crude oil, the prime source of asphalt binder, originates from many naturally occurring crude sources, which vary widely in chemical compositions. These compositions are defined as Saturates, Aromatics, Resins, and Asphaltenes (SARA) fractions. Physical properties of an asphalt binder are closely linked to its crude-inherited SARA fractions. Thus, asphalt binders differ significantly from one another, while they are intended to serve the same way under a specified traffic loading intensity and temperature. To serve this need, asphalt binders are often modified chemically. Sometimes, Reclaimed Asphalt Pavement (RAP) is added to this binder because of the limited supply of virgin …

Feasibility Of 802.11a-Based Transceivers For Vhf/Uhf Communications In Remote Regions, Abhimanyu Nath

Graduate Theses & Non-Theses

The project focuses on adapting a traditional IEEE802.11a specification originally designed for indoors, to work across mountainous terrains such as areas of rural Montana in the UHF band. The goal of the project is to experiment with various CSMA/CA timing parameters to accommodate long propagation delays between mountain peaks. The simulation tool was built in C++. When links with various data rates and hidden nodes were introduced during worst case performance analysis, severe packet drops and queue latencies were found in the network statistics. A few timing optimizations were explored and alternatives were considered in the systems design. When stations …

Holistic Methodology For Stochastic Space Mission Utility Analysis, Ja'mar Alexander Watson

Theses and Dissertations

Analysis and design mechanisms have a profound effect on space missions; yet, space mission engineering is a discipline without unanimous definition and implementation. Current philosophies are inadequate due to incomplete mission phasespaces, disaggregated design methods, exclusion of constitutive relations, curtailed tradespace exploration, and unsubstantiated mission concept solutions. This dissertation presents a new paradigm for simultaneously developing, exploring, and assessing statistically validated space mission concepts. Stochastic modeling and simulation, providing multivariate mission utility analysis with concurrently integrated tradespace exploration, risk assessment, and holistic design, facilitates the methodology. Backtesting of the Apollo II-17 crewed missions to the Moon and retrodiction of Martian …

Time Series Classification Using Deep Learning For Process Planning: A Case From The Process Industry, Nijat Mehdiyev, Johannes Lahann, Andreas Emrich, David Lee Enke, Peter Fettke, Peter Loos

Engineering Management and Systems Engineering Faculty Research & Creative Works

Multivariate time series classification has been broadly applied in diverse domains over the past few decades. However, before applying the classification algorithms, the vast majority of current studies extract hand-engineered features that are assumed to detect local patterns in the time series. Therefore, the efficiency and precision of these classification approaches are heavily dependent on the quality of variables defined by domain experts. Recent improvements in the deep learning domain offer opportunities to avoid such an intensive hand-crafted feature engineering which is particularly important for managing the processes based on time-series data obtained from various sensor networks. In our paper, …

Rate Based Impact Analysis, Nishant Sharma

School of Computing: Dissertations, Theses, and Student Research

Impact Analysis (IA) identifies control and data dependencies to determine the system components that could be affected by a change. Changes to robotic systems as they are updated often alter the flow of control and sensor data. Changes to the rates at which data is published from sensors, controllers, and other parts of the system are particularly subtle and difficult to detect. These rate changes, even if minor (e.g. lowering the frame rate of a camera), can propagate throughout the system and have broad impacts. However, for robotic systems, these changes in flow rate cannot be precisely tracked by just …

Learning About Women In Stem For First-Year Students [Liberal Arts: Math And Science], Reem Jaafar, Ian Alberts

Open Educational Resources

This assignment was designed for students in the first year seminar and aligns with the Inquiry and Problem Solving core competency, with a focus on “framing the issues” (identifies and/or addresses questions problems and/or hypothesis informed by knowledge of context) and “evidence gathering” (assembles, reviews and synthesizes evidence from diverse sources of relevant knowledge). Both assignments rely on writing and one may include an oral component. In writing, the focus is on “Content Development and Organization,” as well as “Control of Language, Syntax, and Mechanics.”

LaGuardia’s Core Competencies and Communication Abilities

Main Course Learning Objectives:

• The LMF course for Liberal …

Climate, Not Conflict, Explains Extreme Middle East Dust Storm, Anthony J. Parolari, Dan Li, Elie Bou-Zeid, Gabriel Katul, Shmuel Assouline

Civil and Environmental Engineering Faculty Research and Publications

The recent dust storm in the Middle East (September 2015) was publicized in the media as a sign of an impending ‘Dust Bowl.’ Its severity, demonstrated by extreme aerosol optical depth in the atmosphere in the 99th percentile compared to historical data, was attributed to the ongoing regional conflict. However, surface meteorological and remote sensing data, as well as regional climate model simulations, support an alternative hypothesis: the historically unprecedented aridity played a more prominent role, as evidenced by unusual climatic and meteorological conditions prior to and during the storm. Remotely sensed normalized difference vegetation index demonstrates that vegetation cover …

Hydrologic Transport Of Dissolved Inorganic Carbon And Its Control On Chemical Weathering, Salvatore Calabrese, Anthony J. Parolari, Amilcare Porporato

Civil and Environmental Engineering Faculty Research and Publications

Chemical weathering is one of the major processes interacting with climate and tectonics to form clays, supply nutrients to soil microorganisms and plants, and sequester atmospheric CO₂. Hydrology and dissolution kinetics have been emphasized as factors controlling chemical weathering rates. However, the interaction between hydrology and transport of dissolved inorganic carbon (DIC) in controlling weathering has received less attention. In this paper, we present an analytical model that couples subsurface water and chemical molar balance equations to analyze the roles of hydrology and DIC transport on chemical weathering. The balance equations form a dynamical system that fully determines …

Streaming Vr For Immersion: Quality Aspects Of Compressed Spatial Audio, Miroslaw Narbutt, Sean O’Leary, Andrew Allen, Jan Skoglund, Andrew Hines

Conference papers

Delivering a 360-degree soundscape that matches full sphere visuals is an essential aspect of immersive VR. Ambisonics is a full sphere surround sound technique that takes into account the azimuth and elevation of sound sources, portraying source location above and below as well as around the horizontal plane of the listener. In contrast to channel-based methods, ambisonics representation offers the advantage of being independent of a specific loudspeaker set-up. Streaming ambisonics over networks requires efficient encoding techniques that compress the raw audio content without compromising quality of experience (QoE). This work investigates the effect of audio channel compression via the …