Engineering Commons^™

Theory Of Constraints Project Management In A Manufacturing Environment, Shihching Kraft

Mechanical & Aerospace Engineering Theses & Dissertations

The following thesis covers the concepts of Theory of Constraints (TOC) Project Management. Introduced by Eliyahu M. Goldratt in I 984, TOC is a management philosophy that focuses on the use of critical chain project management to prioritize everyday tasks in a company. In TOC Project Management, there is always at least one resource constraint that limits the speed at which projects are completed. TOC management philosophy also recognizes that most projects in the manufacturing industry face unknown schedule delays that could cause projects to be completed late or over the planned budget. During project plan creation, plans are developed …

New Test Capabilities For The 0.3-Meter Transonic Cryogenic Wind Tunnel, Ben D. Phillips

Mechanical & Aerospace Engineering Theses & Dissertations

The small-scale, cryogenic, and high pressure characteristics of the 0.3-Meter Transonic Cryogenic Tunnel provide a unique, high-Reynolds number research capability. However, the facility is currently restricted by its reliance on a two-dimensional adaptive wall test section coupled with an inadequate facility control system. Access to the test section is restricted, the walls require excess time for convergence and are mechanically constrained by a wall jacking system that degrades under cyclic cryogenic operations, and the tunnel requires excessive time to reach the set point, particularly at low Mach numbers. As a result, productivity and operational efficiency are limited, leading to expensive …

Examination Of Micromotion-Induced Transient Effects Of Brain Tissue Interfaced With A Neural Probe, Michael A. Polanco

Mechanical & Aerospace Engineering Theses & Dissertations

Neural probes are utilized to obtain information regarding the activity of brain cells for neural stimulation. The functional longevity of a probe is dependent upon its ability to minimize injury risk during insertion and the recording period in vivo, which could be related to micromotion-related strain between the probe and surrounding tissue. A series of finite element analyses were conducted using the nonlinear transient dynamic code LSDYNA (LSTC, Livermore, CA) to study the strain induced within the brain in an area around a neural probe. A variety of displacement pulses were input into the brain, first where a high magnitude, …

An Investigation Of Unsteady, In-Cylinder Flows Of A Mock-Up Internal Combustion Engine Using Particle Image Velocimetry, David Schleeper

Mechanical & Aerospace Engineering Theses & Dissertations

Particle Image Velocimetry is frequently used in fluid mechanics and aerodynamics research to provide accurate, quantitative information on the instantaneous structure of a variety of flow fields. This technique provides a nonintrusive means of capturing vital, whole-field details of internal and external flows, such as vortex size and strength, not usually possible through other flow investigation techniques. Due to practical difficulties, the utilization of this method for the study of combustion chamber flow within an internal combustion engine is still relatively uncommon. This study used a TSI Particle Image Velocimetry system to identify two-dimensional flow patterns and velocities on a …

Photovoltaic Tracker Optimization With Unique Fault Detection And Enhanced Combiner System, Caitlin Nicole Conway

Electrical & Computer Engineering Theses & Dissertations

Renewable energy resources are rapidly becoming extremely important as the world's energy consumption continues to rise. The most popular of these resources is solar energy and more specifically photovoltaic energy. Currently, solar modules on the market are still not highly efficient. In order to increase the productivity of solar energy systems, larger fixed-panel photovoltaic systems or tracking photovoltaic systems are utilized. The major disadvantage of larger photovoltaic systems is the increased space requirements. Therefore, tracking photovoltaic systems are the best alternative to achieve higher solar energy yields.

To date, the only method of monitoring tracking photovoltaic systems is with the …

The Spatial Distribution Of Cancer Incidence In Fars Province: A Gis-Based Analysis Of Cancer Registry Data, Ali Goli, Mahbobeh Oroei, Mehdi Jalalpour, Hossein Faramarzi, Mehrdad Askarian

Civil and Environmental Engineering Faculty Publications

Background: Cancer is a major health problem in the developing countries. Variations of its incidence rate among geographical areas are due to various contributing factors. This study was performed to assess the spatial patterns of cancer incidence in the Fars Province, based on cancer registry data and to determine geographical clusters.

Methods: In this cross sectional study, the new cases of cancer were recorded from 2001 to 2009. Crude incidence rate was estimated based on age groups and sex in the counties of the Fars Province. Age standardized incidence rates (ASR) per 100,000 was calculated in each year. …

Harmonic Generation In Multiresonant Plasma Films, Maria Antonietta Vincenti, Domenico De Ceglia, Joseph W. Haus, Michael Scalora

Electrical and Computer Engineering Faculty Publications

We investigate second- and third-harmonic generation in a slab of material that displays plasma resonances at the pump and its harmonic frequencies. Near-zero refractive indices and local field enhancement can deplete the pump for kW/cm² incident powers, without resorting to other resonant photonic mechanisms. We show that low-threshold, highly efficient nonlinear processes are possible in the presence of losses and phase mismatch in structures that are 10⁴ times shorter than typical nonlinear crystals, for relatively low irradiance values.

Formulation To Predict Lower Limb Muscle Forces During Gait, Gil Serrancolí, Jonathan P. Walter, Allison Kinney, A. Barjau, Benjamin J. Fregly, Josep M. Font-Llagunes

Mechanical and Aerospace Engineering Faculty Publications

The human body has more muscles than Degrees of Freedom (DoF), and that leads to indeterminacy in the muscle force calculation. This study proposes the formulation of an optimization problem to estimate the lower-limb muscle forces during a gait cycle of a patient wearing an instrumented knee prosthesis. The originality of that formulation consists of simulating muscle excitations in a physiological way while muscle parameters are calibrated. Two approaches have been considered. In Approach A, measured contact forces are applied to the model and all inverse dynamics loads are matched in order to get a physiological calibration of muscle parameters. …

Bridging The Gap Between Engineering Design And Pk-12 Curriculum Development Through The Use The Stem Education Quality Framework, Margaret Pinnell, James Rowley, Sandi Preiss, Rebecca P. Blust, Rebecca Beach, Suzanne Franco

Mechanical and Aerospace Engineering Faculty Publications

This paper will describe a unique partnership among the Department of Teacher Education and School of Engineering at the University of Dayton (UD) and the Dayton Regional STEM Center (DRSC). This partnership resulted in the development of the STEM Education Quality Framework (SQF), a tool to guide educators in teaching, learning and refining STEM education. The SQF resulted in a variety of educational tools, including a STEM curriculum template, that was implemented in the DRSCs teacher professional development and curriculum development program entitled the STEM Fellow Program. The STEM Fellow program was later modeled in a unique, NSF sponsored six …

Feed‐In Tariff Design For Domestic Scale Grid‐Connected Pv Systems Using High Resolution Household Electricity Demand Data, Lacour Ayompe, Aidan Duffy

Articles

The advent of large samples of smart metering data allows policymakers to design Feed‐in Tariffs which are more targeted and efficient. This paper presents a methodology which uses these data to design FITs for domestic scale gridconnected PV systems in Ireland. A sample of 2,551 household electricity demand data collected at ½‐hourly intervals, electricity output from a 2.82 kWp PV system over the same time interval as well as PV system costs and electricity tariffs were used to determine the required FIT to make it worthwhile for the households to invest in the PV system. The methodology shows that it …

Small Wind Turbines In Turbulent (Urban) Environments: A Consideration Of Normal And Weibull Distributions For Power Prediction, Keith Sunderland, Thomas Woolmington, Jonathan Blackledge, Michael Conlon

Articles

The urban terrain and the associated morphological complexities therein, present significant challenges for the deployment of small wind turbines. In particular, a considerable amount of uncertainty is attributable to the lack of understanding concerning how turbulence within urban environments affects turbine productivity. Current wind turbine power output measurements (particularly for small/micro wind turbines) are based on an average wind speed over an observation period; with limited accountability of the variability of wind speed within the observation time frame. This paper however, presents two models that can instead accurately consider such wind speed variation and how it affects the turbine, based …

Repair Of I-65 Expressway Bridges Using Carbon Fiber Reinforced Polymer (Cfrp) Composites, Ching Chiaw Choo, Abheetha Peiris, Issam E. Harik

Kentucky Transportation Center Research Report

This report documents the repair of five locations along the I-65 Expressway in Jefferson County, KY. The repair involved: (1) the precast prestressed concrete girder spans between Jacob Street and Gray Street, (2) the reinforced concrete bearing pads of Bridge Pier 4 at the intersection of Jefferson Street and Preston Street, (3) the reinforced concrete bearing pads of Bridge Pier 6 near the intersection of Main Street and Hancock Street, (4) the precast prestressed concrete girder spans between Chestnut Street and Gray Street and (5) the reinforced concrete pier column on East Muhammad Ali Blvd.

The precast prestressed concrete girders …

Kentucky's Prism-Based Automated Ramp Screening System Evaluation, Jerry Kissick, David Q. Hunsucker, Andrew Martin, Jennifer Walton, Mark Bell

Kentucky Transportation Center Research Report

In 2010, Kentucky implemented a Performance Registration Information Systems and Management (PRISM) based automated ramp screening system (PARSS) at the Boone County inspection station on southbound I-71. The purpose of the PARSS is to identify and screen every vehicle that enters the Boone County inspection station. The system provides automated screening of trucks based on the license plate number and the USDOT number displayed on the vehicle. If it is determined that the vehicle should be stopped for inspection, that decision is communicated to the truck driver via the existing directional arrows that direct drivers to the static scale for …

Tools For Applying Constructability Concepts To Project Development (Design), Nikiforos Stamatiadis, Paul Goodrum, Emily Shocklee, Roy Sturgill, Chen Wang

Kentucky Transportation Center Research Report

The purpose of this report is to document the activities of Phases I and II of the research effort and present the findings of the work accomplished. Phase I developed the Constructability Review Database for the Kentucky Transportation Cabinet and Phase II conducted a benefit analysis of the constructability review process. The database provides the basis for entry and collection of constructability reviews and allows for the identification of trends leading to potential improvements of the process. The database can be used to summarize activities, generate reports for a project, and be capable of quantifying the benefits from the process. …

Repair Using Steel Fiber Reinforced Polymer On Us 150 Bridges, Ching Chiaw Choo, Abheetha Peiris, Issam E. Harik

Kentucky Transportation Center Research Report

The report details the pre-construction monitoring, planning and design, and construction of the retrofit measures on the US150 bridge over Beech Fork River in Nelson County, KY and Cartwright Creek bridge on the border of Washington-Nelson County, KY. All reinforced concrete girders of the five-span Beech Fork River bridge and three-span Cartwright Creek bridge of deck-girder construction had developed diagonal cracks near or at the transition of the variable-and-constant depth regions.

To remedy the problem steel fiber reinforced polymer (SFRP) sheets were selected as the means of retrofit due to their strength and stiffness, as well as conformability and flexibility. …

Altered Cholesterol Metabolism In Human Cancers Unraveled By Label-Free Spectroscopic Imaging, Shuhua Yue

Open Access Dissertations

Despite tremendous scientific achievements, cancer remains the second leading cause of death in the United States. Metabolic reprogramming has been increasingly recognized as a core hallmark of cancer. My dissertation work identified novel diagnostic markers and therapeutic targets for human cancers through the study of cholesterol in cancer cells.

Enabled by label-free Raman spectromicroscopy, we performed the first quantitative analysis of lipogenesis at single cell level in human patient cancerous tissues. Our imaging data revealed an unexpected, aberrant accumulation of esterified cholesterol in lipid droplets of high-grade prostate cancer and metastases, but not in normal prostate, benign prostatic hyperplasia, or …

Preparation Of Mesoporous Silica Supported Ruthenium Oxides And The Application And Kinetic Study In The Catalysis Of Water Oxidation, Yang Zhang

Open Access Dissertations

Photo-induced water splitting of water into H2 and O2 has been a major focus in the development of clean and renewable energy. The development of viable and efficient catalysts that facilitates O2 production remains the major challenge in the study of the corresponding half-reaction of water oxidation. There are plenty of metal oxides reported active in the catalysis of water oxidation. However, several important performance bench marks of those materials, such as the non-stoichiometric production of O2, slow reaction rate and/or low quantum efficiency, remain to be improved.

Ruthenium oxide (RuO2) has long been known as one of the most …

A Novel Fluid Structure Interaction And Thermal Model To Predict The Cylinder Block / Valve Plate Interface Performance In Swash Plate Type Axial Piston Machines, Marco Zecchi

Open Access Dissertations

The cylinder block / valve plate interface represents one of the most critical design element in the rotating kit of axial piston machines. The thin film of lubricant between cylinder block and valve plate has to fulfill simultaneously a bearing and a sealing function under dynamic load conditions; on the other hand, it represents an important source of power losses due to viscous friction and leakage flow.

An accurate prediction of the time changing characteristics of the interface, in terms of fluid film thickness, dynamic pressure field, load carrying ability and energy dissipation is necessary to generate more efficient and …

Solar Cell Temperature Dependent Efficiency And Very High Temperature Efficiency Limits, John Robert Wilcox

Open Access Dissertations

Clean renewable solar energy is and will continue to be a critically important source of electrical energy. Solar energy has the potential of meeting all of the world's energy needs, and has seen substantial growth in recent years. Solar cells can convert sun light directly into electrical energy, and much progress has been made in making them less expensive and more efficient. Solar cells are often characterized and modeled at 25 °C, which is significantly lower than their peak operating temperature. In some thermal concentrating systems, solar cells operate above 300 °C. Since increasing the temperature drastically affects the terminal …

Fabricating Complex-Shaped Components By Room-Temperature Injection Molding Of Aqueous Ceramic Suspension Gels, Valerie Lynn Wiesner

Open Access Dissertations

Water-based ceramic suspension gels (CeraSGels) effectively produced dense, near-net shape ceramic parts by room-temperature injection molding, a novel processing method based on traditional ceramic injection molding. This alternative method eliminated the need for heating and cooling feedstocks to process, as is required in conventional injection molding, through control of the rheological response of the CeraSGels by simply varying polymer content without the use of any harsh crosslinking or curing agents or further chemical processes. The development of room-temperature injection molding initially focused on forming CeraSGels based on alumina, a readily available model material, in order to optimize suspension preparation and …

Development Of A Multiscale Atomistic Code To Investigate Self-Organized Pattern Formation Induced By Ion Irradiation, Zhangcan Yang

Open Access Dissertations

Various self-organized patterns including ripples and quantum dots can be induced by ion beam sputtering (IBS). For the past decades, the understanding of such phenomenon has been mainly relied on the Bradley-Harper theory that attributes the formation of self-organized patterns to the interplay between roughening by curvature dependence of erosion and smoothening by surface diffusion. Recently, the development of the crater function theory has overturned this erosion-based paradigm to a redistribution-based paradigm. The theory has proved that erosion is irrelevant and negligible in the pattern formation at low and intermediate incidence angles. Despite the success, there are still some questions …

Developing A Framework For Determining The Contribution Of Transportation Project To Sustainable Development, Karim Ahmed Abdel Warith

Open Access Dissertations

In the past few years, stakeholders in the transportation industry have been concerned with sustainability. However, transportation decision makers have had difficulty incorporating sustainability into transportation infrastructure decisions. This is mainly attributed to the vagueness of the term. Incorporating sustainability into transportation decision making has been a desire put forth by engineers for that past 10 years. However, with no apparent method of defining sustainability, designers and decision makers have not been able to fulfill this desire.

This investigation attempts to define sustainability in a comprehensive and quantitative manner. The research proposes a new methodology that relies on the objective …

High-Pressure Vapor-Phase Catalytic Hydrodeoxygenation Of Lignin-Derived Compounds To Hydrocarbons On Bimetallic Catalysts In The Range Of 0.2-2.4 Mpa., Sara Lynn Yohe

Open Access Dissertations

Biomass, as the only renewable source of carbon, presents a sustainable alternative to liquid fossil fuels for the production of renewable transportation fuels and chemicals. The lignin portion of biomass poses a significant challenge in the upgrading and conversion of lignocellulosic biomass to fuels and chemicals, and in many current biorefineries is not utilized. However, the lignin fraction is a valuable feedstock due to its aromatic structure, lower O:C ratio than cellulose and hemicellulose, and high energy content (up to 40%) and weight fraction (average 25 wt%) of biomass. Several processes (including fast-pyrolysis, fast-hydropyrolysis, and liquid phase processing) are able …

The Comparison Of Composite Aircraft Field Repair Method (Cafrm) With Traditional Aircraft Repair Technologies, Peng Hao Wang

Open Access Dissertations

In the aviation industry, manufacturers made the transition from aluminum to composite materials for the majority of their primary structures over the last few decades. While the design and manufacturing techniques have consistently evolved, field repair methods were consistently overlooked. In this study, specimens fabricated using some of the common repair methods such as the autoclave repair method, and Double Vacuum Debulk (DVD) repair method were tested against the Composite Aircraft Field Repair Method (CAFRM) proposed by the researcher. Specimens were tested with microscopy, acid digestion, short beam shear, and mode I fracture tests. The researcher was able to determine …

Scholarly Collaboration In Engineering Education: From Big-Data Scientometrics To User-Centered Software Design, Hanjun Xian

Open Access Dissertations

Engineering education research has grown into a flourishing community with an-ever increasing number of publications and scholars. However, recent studies show that a significant amount of engineering education knowledge retains a clear disciplinary orientation. If the gaps in scholarly collaboration continue to be prevalent within the entire community, it will become increasingly difficult to sustain community memory. This will eventually inhibit the propagation of innovations and slow the movement of research findings into practice.

This dissertation studies scholarly collaboration in the engineering education research community. It provides a clear characterization of collaboration problems and proposes potential solutions. The dissertation is …

Atomistic Simulation Of Plasma Interaction With Plasma Facing Components In Fusion Reactors, Xue Yang

Open Access Dissertations

The interaction between plasma and fusion relevant materials is one of the critical issues in successfully using those materials in Tokamak reactors. This research uses molecular dynamics, kinetic Monte Carlo and binary collision approximation methods to model fusion relevant material bombarded by energetic particles to investigate retention, deposition, sputtering, erosion, blistering effects, diffusion, and so on.

The deuterium bombardment of monocrystalline tungsten was modeled by LAMMPS code using Tersoff type interatomic potential. The deuterium trapping rate, implantation depth, and stopping time in 600-2000 K tungsten bombarded by 5-100 eV deuterium atoms were simulated. Irradiated monocrystalline tungsten became amorphous prior to …

A Dynamic Magnetic Equivalent Circuit Model For Design And Control Of Wound Rotor Synchronous Machines, Xiaoqi Wang

Open Access Dissertations

Recently, a new magnetic equivalent circuit (MEC) model was developed to support automated multi-objective design of wound-rotor synchronous machines (WRSMs). In this research, the MEC model and its application have been enhanced. Initial enhancement has focused on using the MEC model to explore machine design and control as a unified problem. Excitation strategies for optimal steady-state performance have been developed. The optimization is implemented in two phases. First, stator and field excitation at rated power is obtained as part of a WRSM design in which the objectives are to minimize machine mass and loss. Second, a map between current and …

Design And Assembly Of Nanostructured Complex Metal Oxide Materials For The Construction Of Batteries And Thermoelectric Devices, Gautam Ganapati Yadav

Open Access Dissertations

Thermoelectric devices and lithium-ion batteries are among the fastest growing energy technologies. Thermoelectric devices generate energy from waste heat, whereas lithium-ion batteries store energy for use in commercial applications. Two different topics are bound with a common thread in this thesis - nanotechnology! In fact, nanostructuring is a more preferred term for the approach I have taken herein. Another commonality between these two topics is the material system I have used to prove my hypotheses - complex metal oxides.

Complex metal oxides can be used for both energy generation and storage as they are stable at high temperatures, are benign …

Synthesis Of Graphene Nanomaterials And Their Application In Electrochemical Energy Storage, Guoping Xiong

Open Access Dissertations

The need to store and use energy on diverse scales in a modern technological society necessitates the design of large and small energy systems, among which electrical energy storage systems such as batteries and capacitors have attracted much interest in the past several decades. Supercapacitors, also known as ultracapacitors, or electrochemical capacitors, with fast power delivery and long cycle life are complementing or even replacing batteries in many applications. The rapid development of miniaturized electronic devices has led to a growing need for rechargeable micro-power sources with high performance. Among different sources, electrochemical micro-capacitors or micro-supercapacitors provide higher power density …

Effects Of Dip-Coated Films On The Properties Of Implantable Intracortical Microelectrodes, Salah Sommakia

Open Access Dissertations

The successful clinical use of implantable intracortical microelectrodes (ICMs) to treat certain types of deafness, blindness, and paralysis is limited by a reactive tissue response (RTR) of the brain. This RTR culminates in the formation of a tight glial scar and a loss of neuronal density around implanted ICMs, and is accompanied by a decrease in signal to noise ratio and an increase in impedance. While no comprehensive mechanistic understanding of the underlying biology is currently agreed upon in the field, a general consensus exists around a highly volatile acute RTR phase. During this acute phase, the electrical properties of …