Engineering Commons^™

Synergies Controls Improve Prediction Of Knee Contact Forces And Muscle Excitations During Gait, Benjamin J. Fregly, Jonathan P. Walter, Allison Kinney, Scott A. Banks, Darryl D. D'Lima, Thor F. Besier, David G. Lloyd

Mechanical and Aerospace Engineering Faculty Publications

This study investigates whether use of muscle excitation controls constructed from subjectspecific muscle synergy information can improve optimization prediction of knee contact forces and muscle excitations during walking. Muscle synergies quantify how a large number of experimental muscle electromyographic (EMG) signals can be reconstructed by linearly mixing a much smaller number of neural commands generated by the nervous system. Our hypothesis was that controlling all muscle excitations with a small set of experimentally calculated neural commands would improve prediction of knee contact forces and leg muscle excitations compared to using independently controlled muscle excitations.

Network Dynamics Of Visual Naming, Christopher R. Conner

Dissertations and Theses (Open Access)

Recognition and naming of objects and actions are fundamental components of language. They involve several different systems working in coordination to accomplish a complex behavior. During visual naming, sensory and semantic processing are carried out by dedicated cortical substrates in the temporal and occipital lobes, while response selection and articulatory planning are handled by prefrontal cortex. Despite decades of research using lesion analysis, functional MRI and electro-encephalography, the precise dynamics involved remain unknown due to the inadequate spatio-temporal resolution of these methodologies. Of particular interest is the organization of semantic knowledge and the degree of serial and parallel organization of …

Parameterizing Analytical Models To Support An Empirically Based Warehouse Design Methodology, Lisa Thomas

Graduate Theses and Dissertations

Research in the area of warehouse design is characterized by a myriad of analytical models that address one, typically small and isolated, area of the warehouse. These models, although important in gaining insight into one question of warehouse design, are of limited value when one considers the larger question of overall warehouse design. Thus, research in the area of overall warehouse design typically consists of procedure-driven processes based on qualitative factors and not the quantifiable results of analytical models.

In contrast, practitioners have significant empirical data related to how a design alternative performs in an industry, a company, or a …

Structural Properties Of Ferroelectric Lead (Zirconium0.5,Titanium0.5)Oxygen3 Nanotube Array And Electronic Structure Of Lao Delta-Doped Strontium Titanate, Rajendra Prasad Adhikari

Graduate Theses and Dissertations

In this Dissertation we begin with two introductions on: 1) ferroelectricity and related phenomena, and 2) novel properties of Oxide electronics and the generation of two dimensional electron gas. We then give theoretical background of density functional theory (including LDA+U) and pseudopotentials. The first part of research work is about structural, polarization, and dielectric properties of ferroelectric Lead Zirconate Titanate (PZT) solid solution in the form of a nanotube array, embedded in a matrix medium of different ferroelectric strengths. We use the effective Hamiltonian derived from first-principles and finite-temperature Monte Carlo methods to determine the various properties. We revealed different …

Multiscale Study Of Batio3 Nanostructures And Nanocomposites, Lydie Louis Louis

Graduate Theses and Dissertations

Advancements in integrated nanoelectronics will continue to require the use of unique materials or systems of materials with diverse functionalities in increasingly confined spaces.

Hence, research on finite-dimensional systems strive to unearth and expand the knowledge of fundamental physical properties in certain key materials which exhibit numerous concurrent and exploitable functions.

Correspondingly, ferroelectric nanostructures, which particularly display a plethora of complex phenomena, prevalent in countless fields of research, are noteworthy candidates. Presently, however, the assimilation of zero-(0D) and one-dimensional (1D) ferroelectric into micro- or nano-electronics has been lagging, in part due to a lack of applied and fundamental studies but …

Sustainable Design Education Through A Self-Directed Online System, Jeremy Faludi, Adam Menter

Dartmouth Scholarship

Sustainable design and engineering is an important topic, yet it is under-represented in educational institutions; moreover, it must be taught to practicing professionals, not just students. A free online system has been created to address both problems at once, providing educational materials for educators and also providing a self-paced program for professionals or students to earn a certificate in sustainable design. Called the Autodesk Sustainability Workshop, it is a collection of video tutorials and supporting materials (PDF reference guides, slide decks, quizzes, and other resources) that can be used either by individuals themselves or by educators (either in schools or …

Attitudes Of Virginia Technology Education Teachers Toward The Effectiveness Of Their Curriculum, Glenn Patton

OTS Master's Level Projects & Papers

The problem of this study was to determine Virginia technology education teachers' attitudes regarding the effectiveness of their curriculum and resources.

Erratum: A Mechanistic Model Of Early Fcεri Signaling: Lipid Rafts And The Question Of Protection From Dephosphorylation (Plos One (2013) 8 (8)), Dipak Barua, Byron Goldstein

Chemical and Biochemical Engineering Faculty Research & Creative Works

A funding organization and grant were incorrectly omitted from the Funding Statement. The Funding Statement should read: "Research reported in this publication was supported by the National Institute of General Medical Sciences of the National Institutes of Health under award number R37-GM035556, The SpatioTemporal Modeling Center at the University of New Mexico under award number P50:GM065794 and the Department of Energy through contract DE-AC52-06NA25396. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript."

Investigation Of Sound Transmission Through An Open Window Into A Room, Caleb F. Sieck

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

In recent decades, noise levels in cities and the associated annoyance and health consequences have become regular topics of discussion. As a result, the assessment of environmental noise transmitting into buildings has received much attention. Current models of sound transmission through open windows have either neglected their thickness or the presence of a room behind on one side. The objectives of the present work were to (1) develop an accurate analytical model of sound transmission through an open window of finite thickness into a room, (2) verify the analytical model using a finite element model and experimental measurements, and (3) …

Characterization And Quantification Of Monomers, Oligomers, And By-Products From Switchgrass Hemicelluloses During Biomass Pretreatment, Kris Allan Bunnell

Graduate Theses and Dissertations

Production of fuels and chemicals from biomass is contingent upon economical release of carbohydrates from biomass. Carbohydrates can then be used for production of bio-based products using a biochemical conversion process. Pretreatment, the first step of the biochemical conversion process, has been suggested to be the most costly step of the conversion process. Thus, better understanding the behavior of biomass during pretreatment is imperative for an economically viable production of biofuels and chemicals. Elucidating the physicochemical properties of biomass and developing an understanding the depolymerization patterns of biomass during pretreatment will help progress towards this goal.

In this study, July- …

Real-Time Visualization Of Finite Element Models Using Surrogate Modeling Methods, Ryan C. Heap

Theses and Dissertations

Finite element analysis (FEA) software is used to obtain linear and non-linear solutions to one, two, and three-dimensional (3-D) geometric problems that will see a particular load and constraint case when put into service. Parametric FEA models are commonly used in iterative design processes in order to obtain an optimum model given a set of loads, constraints, objectives, and design parameters to vary. In some instances it is desirable for a designer to obtain some intuition about how changes in design parameters can affect the FEA solution of interest, before simply sending the model through the optimization loop. This could …

Achieving High Strength And High Ductility In Friction Stir-Processed Cast Magnesium Alloy, Wei Yuan, Sushanta K. Panigrahi, Rajiv S. Mishra

Materials Science and Engineering Faculty Research & Creative Works

Friction stir processing (FSP) is emerging as an effective tool for microstructural modification and property enhancement. As-cast AZ91 magnesium alloy was friction stir processed with one-pass and two-pass to examine the influence of processing conditions on microstructural evolution and corresponding mechanical properties. Grain refinement accompanied with development of strong basal texture was observed for both processing conditions. Ultrafine-grained (UFG) AZ91 was achieved under two-pass FSP with fine precipitates distributed on the grain boundary. The processed UFG AZ91 exhibited a high tensile strength of ∼435 MPa (117 pct improvement) and tensile fracture elongation of ∼23 pct. The promising combination of strength …

Influence Of Strain And Strain Rate On Microstructural Evolution During Superplasticity Of Mg-Al-Zn Sheet, A. Mohan, S. K. Panigrahi, R. S. Mishra, R. Verma

Materials Science and Engineering Faculty Research & Creative Works

Strain-induced abnormal grain growth was observed along the gage length during high-temperature uniaxial tensile testing of rolled Mg-Al-Zn (AZ31) sheet. Effective strain and strain rates in biaxial forming of AZ31 sheets also affected the nature of grain growth in the formed sheet. For the uniaxial testing done at 400 C and a strain rate of 10^-1 s^-1, abnormal grain growth was prevalent in the gage sections that experienced true strain values between 0.2 and 1.0. Biaxial forming of AZ31 at 5 x 10 ^-2 s^-1 and 400 C also exhibited abnormal grain growth at the cross …

Segmentation And Model Generation For Large-Scale Cyber Attacks, Steven E. Strapp

Theses

Raw Cyber attack traffic can present more questions than answers to security analysts. Especially with large-scale observables it is difficult to identify which packets are relevant and what attack behaviors are present. Many existing works in Host or Flow Clustering attempt to group similar behaviors to expedite analysis; these works often phrase the problem directly as offline unsupervised machine learning. This work proposes online processing to simultaneously model coordinating actors and segment traffic that is relevant to a target of interest, all while it is being received. The goal is not just to aggregate similar attack behaviors, but to provide …

Preconditioning Methods For Ideal And Multiphase Fluid Flows, Ashish Gupta

Masters Theses and Doctoral Dissertations

The objective of this study is to develop a preconditioning method for ideal and multiphase multispecies compressible fluid flow solver using homogeneous equilibrium mixture model. The mathematical model for fluid flow going through phase change uses density and temperature in the formulation, where the density represents the multiphase mixture density. The change of phase of the fluid is then explicitly determined using the equation of state of the fluid, which only requires temperature and mixture density. The method developed is based on a finite-volume framework in which the numerical fluxes are computed using Roe’s [1] approximate Riemann solver and the …

Computational Investigation Of The Effects Of Casing Treatments On The Performance Of A Turbofan, Weiyang Lin

Masters Theses and Doctoral Dissertations

A computational survey focused on modifications to the casing near the rotor blade tip is carried out for the purpose of enhancing the performance and increasing the stall margin of a model turbofan stage in transonic operating conditions. The study is divided into three phases. During the first phase two types of casing treatments, inward protruding rings and circumferential grooves, were tested with relatively coarse grids. In the second phase, a grid resolution study is carried out with the results from this phase influencing the choices for the third stage. In the third phase, a comprehensive study is performed to …

Analysis Of Two-Stage Shunt Capacitor Bank Protection Deficiencies With Mitigation Suggested, Russell William Patterson

Masters Theses and Doctoral Dissertations

A large utility was experiencing a problem when switching a two-stage capacitor bank resulting in misoperations of the bank protection. When the bypass switch is opened a long duration dc offset occurs across all capacitors. This dc causes saturation of the tap point VT resulting in a false differential voltage and misoperation of the protection. The utility had to disable the voltage differential during switching until the phenomenon could be studied and a suitable solution found. The work is a comprehensive analysis of the transients affecting the protection and how the problem could be mitigated. An analytical approach was taken …

Water Desalination And Purification Using Renewable Energy Technologies, Michael Louis Broggi

Masters Theses and Doctoral Dissertations

Water is an essential element of life as well as an integral cornerstone of any civilizations economic development. Although taken for granted by most living in developed nations, access to clean drinking water still proves to be a daily struggle for more than 1.2 billion individuals around the globe. More than 10% of the global population consumes food grown using waste water on a daily basis. Desalination facilities are in operation around the globe but are extremely large consumers of energy. There are several options available today which can reduce this energy demand and bring the desalination process down to …

Development Of Stationary And Mobile Tailgating Detection Solutions For Ground Vehicles, Tyler Zellmer

All Theses

Improving the safety of North American roadways is a top priority for government agencies and transportation organizations alike. Regulations on appropriate driving behavior have been developed to minimize the likelihood of crashes occurring, but law enforcement tools remain to be fully developed and applied in the field. One prominent example of this is tailgating – the dangerous act of one ground vehicle following another too closely. This activity is responsible for thousands of crashes every year, but police officers currently have few tools to accurately detect and document tailgating events. Though tailgating often occurs in a wide variety of vehicle …

Extraction Of Antioxidants From Animal Blood And Its Potential Application As A Pet Food Preservative, Chengyi Tu

All Theses

Nowadays, more and more people are having pets as members of their family. To the year of 2012, there are 78.2 million dogs and 86.4 million cats owned in the U.S according to the report of the Humane Society of the U.S. The pet food industry as a result has been prosperous, with an estimated market size of $21 billion in the year of 2013. However, there is a common problem for the industry - fat rancidification. Pet foods usually contain relatively high levels of fat, which, if not well protected, are prone to oxidation and generate unfavorable products including …

Near-Duplicate Video Retrieval: Current Research And Future Trends, Jiajun Liu, Zi Huang, Hongyun Cai, Heng Tao Shen, Chong-Wah Ngo, Wei Wang

Research Collection School Of Computing and Information Systems

The exponential growth of online videos, along with increasing user involvement in video-related activities, has been observed as a constant phenomenon during the last decade. User's time spent on video capturing, editing, uploading, searching, and viewing has boosted to an unprecedented level. The massive publishing and sharing of videos has given rise to the existence of an already large amount of near-duplicate content. This imposes urgent demands on near-duplicate video retrieval as a key role in novel tasks such as video search, video copyright protection, video recommendation, and many more. Driven by its significance, near-duplicate video retrieval has recently attracted …

Functional Ontologies And Their Application To Hydrologic Modeling: Development Of An Integrated Semantic And Procedural Knowledge Model And Reasoning Engine, Aaron Range Byrd

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In hydrology we straddle the domains of science and engineering. As hydrologists our goal is to predict the movement and volume of water. As scientists we seek to improve our understanding of water-related processes and how to model them. As engineers we seek to be able answer specific water-related questions to provide protection and an essential resource for the people we serve. Underlying all of our work is a body of knowledge that we have developed and continue to develop. This knowledge involves many aspects, such as the role of various hydrologic processes, how to obtain data, computational models that …

Geosynchronous Earth Orbit/Low Earth Orbit Space Object Inspection And Debris Disposal: A Preliminary Analysis Using A Carrier Satellite With Deployable Small Satellites, Derick A. Crockett

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

From communication to weather prediction, to national security, geosynchronous satellites play an important role in our society. Geosynchronous satellites are about 35,786 km (22,236 miles) from the surface of the earth. Getting a satellite to this altitude is very expensive, making geosynchronous satellites highly valued assets. Ground-based observation of these satellites is very limited and provides little insight when failures or anomalies occur. To provide detailed images and information of these critical satellites, highly functioning smaller satellites can be employed. This study explores the potential benefits of using these smaller satellites to perform on-orbit proximity inspections of geosynchronous satellites. The …

Digital Microfluidics As A Reconfiguration Mechanism For Antennas, Yasin Damgaci

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The properties of conventional antennas are fixed by the initial design and cannot be changed. A reconfigurable antenna, on the other hand, can dynamically change its properties, and it can adjust its behavior for a given propagation condition. This dissertation work concentrates on novel reconfiguration technologies, including design, microfabrication, and characterization aspects with an emphasis on their applications to multifunctional reconfigurable antennas. In the literature, reconfigurable antennas have made use of various reconfiguration techniques. The most common techniques utilized revolved around switching mechanisms. Other techniques such as the incorporation of variable capacitors, varactors, and physical structure manipulation surfaced recently to …

Computational Biomechanical Modeling Of The Human Knee During Kneeling, Tariq R. Abo-Alhol

Electronic Theses and Dissertations

Total knee replacement benefits patients who suffer from severe knee pain or joint stiffness and other joint related illnesses that limit everyday activities. There has been an increase in the number of procedures performed each year and a need to evaluate the performance of these implants during specialized activities such as kneeling. Most computational studies lack insight into inter-patient variability and the results do not apply to large population. This study developed: (1) three-dimensional explicit finite element (FE) models to investigate natural and implanted knee joint kinematics and bone strain and (2) a platform to enable population-based evaluation by combining …

Juxtaposing Nasa’S Aeronet Aod With Carb Pm Data Over The San Joaquin Valley To Facilitate Multi-Angle Imaging Spectroradiometer (Misr) Pm Pollution Research, John Kanemoto

STAR Program Research Presentations

Airborne particulate matter (PM) has been shown to increase the risk for asthma, chronic bronchitis, cardiopulmonary complications, and respiratory cell membrane damage/infection/leakage. PM levels are currently analyzed from two perspectives: stationary land-based monitoring (LBM) sites and total Aerosol Optical Depth (AOD) atmospheric column measurements. Both perspectives often leave miles of space between measuring locations and will have a continually increasing cost from introducing/maintaining sites. The Multi-angle Imaging SpectroRadiometer (MISR) satellite team hopes to begin investigating/archiving PM levels comprehensively via inputting MISR AOD measurements into a function/model which predicts the amount of ground level PM.

In the future, multivariable spatial correlations …

Non-Redundant Sensor Fault Detection Using An Improved Dynamic Model, Brandon Cannon, Robert C. Leishman, Timothy W. Mclain, Joseph Jackson, Jovan Boskovic

Faculty Publications

This paper proposes a method of detecting faults in non-redundant sensors. Such a method is advantageous for small unmanned aerial vehicles (UAVs), which are prevented from carrying redundant sensors due to size, weight, and power constraints. The method we propose uses a multiplicative extended Kalman lter (MEKF) for estimation and employs hypothesis testing to detect faults. This method has been shown to detect bias, drift, and increased noise in a non-redundant sensor real-time on board an autonomous rotorcraft.

Robust Motion Estimation With Rgb-D Cameras, Robert C. Leishman, Daniel Koch, Timothy W. Mclain

Faculty Publications

Estimating vehicle motion using vision sensors in real time has been greatly explored in the past few years due to speed improvements and advances in computer hardware. Six degree of freedom motion estimation using vision information is desirable due to a vision sensors low cost, low power requirements and light weight and for the quality of the solutions that can be obtained using few assumptions about the environment. However, cameras have the downside of not providing good estimates when visual features are sparse or not available. Also, there are problems with changes in lighting and when light is low or …

Effect Of Differential Movement Of Straight Reinforcing Bars During Early Age Curing On The Bond Strength, Tyler Andrews

All Theses

As the nation's infrastructure continues to age, the number of structural deficiencies is rising. Accordingly, there is a great need and desire to replace these failing components in a quick and efficient fashion. Prefabricated elements for structures such as bridges and parking decks are commonly implemented in this process in order to save both time and money. These prefabricated elements are often subjected to moving live loads during construction and repair which, consequently, result in differential movements occurring across the joints connecting the elements of these structures. Potential reductions in joint capacity, joint stiffness, and structural durability are the byproducts …

Fabrication And Characterization Of Radio-Frequency Sensors For Liquid Material Detection, Yuxi He

All Theses

This thesis presents a series of studies on fabrication and characterization of radio-frequency (RF) sensors. In the light of Electromagnetics and Transmission Line Theory, we designed multiple RF sensors with different detection capability emphasis and used them to detect various materials, especially liquid samples and materials in solutions such as dielectric thin films, confined liquids, red blood cells, and malarial pigments (hemozoin). Most sensors were fabricated under clean room environment following the standard process protocols. Proper process developments were also made to achieve special structures and functionalities of our novel sensors. Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) …