Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2013

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 1801 - 1830 of 7289

Full-Text Articles in Engineering

Removal Of Arsenic From Simulated Groundwater Using A Pilot-Scale Constructed Wetland Treatment System, Jeffrey Schwindaman Aug 2013

Removal Of Arsenic From Simulated Groundwater Using A Pilot-Scale Constructed Wetland Treatment System, Jeffrey Schwindaman

All Theses

A pilot-scale constructed wetland treatment system (CWTS) was designed and built to produce biogeochemical conditions that promoted targeted processes for removal of arsenic from simulated groundwater. Two series were designed to promote co-precipitation and sorption of arsenic with iron oxyhydroxides under oxidizing conditions, and two series were designed to promote precipitation of arsenic sulfide and co-precipitation of arsenic with iron sulfide under reducing conditions. The two major objectives were to (1) assess arsenic removal performance and (2) determine the fate and distribution of arsenic in each series. Results indicate that arsenic removal performance was greater in series designed to promote …

Go to article

Data Driven, Performance Based Parking Management In A University Setting, Brian Maleck Aug 2013

Data Driven, Performance Based Parking Management In A University Setting, Brian Maleck

All Theses

With university enrollment increasing, campuses are becoming under increased strain for parking. More students results in more cars on an already stressed parking infrastructure. In many instances, university parking management offices are being asked to accommodate this increase in parking without the construction of new parking infrastructure. In order to accommodate these demands, better parking management is required.
This research develops a framework to evaluate current parking management practices and pinpoint methods to improve upon current practices. The framework is generalized for use by any size and type of university. Clemson University's campus in Clemson, SC was used as a …

Go to article

Particle Electrophoresis And Magnetophoresis In Microchannels, Litao Liang Aug 2013

Particle Electrophoresis And Magnetophoresis In Microchannels, Litao Liang

All Theses

In current pharmaceutical and biotechnology industries with clinical applications, an increased demand for flow control and cell manipulation on the micrometer scale has emerged. Electrokinetic, magnetic and many other physics fields have been exploited to meet this demand. However, due to the requirement for sophisticated micro-structures and the interference of the increasing significance of many `trivial' physics properties (surface potential, permittivity, etc.) at the smaller scale, most applications encounter poor maneuverability and high operation/fabrication complexity issues. Very few attempts have been made to bypass these requirements while maintaining the same control and efficiency. This thesis research investigates the fundamental behaviors …

Go to article

Statistical Regression Methods For Gpgpu Design Space Exploration, Nimisha Raut Aug 2013

Statistical Regression Methods For Gpgpu Design Space Exploration, Nimisha Raut

All Theses

General Purpose Graphics Processing Units (GPGPUs) have leveraged the performance and power efficiency of today's heterogeneous systems to usher in a new era of innovation in high-performance scientific computing. These systems can offer significantly high performance for massively parallel applications; however, their resources may be wasted due to inefficient tuning strategies. Previous application tuning studies pre-dominantly employ low-level, architecture specific tuning which can make the performance modeling task difficult and less generic. In this research, we explore the GPGPU design space featuring the memory hierarchy for application tuning using regression-based performance prediction framework and rank the design space based on …

Go to article

Organization Of Information For Reversible Causes Of Pulseless In-Hospital Cardiac Arrest: A Randomized Control Trial Using A Cognitive Aid, Meera Ramachandran Aug 2013

Organization Of Information For Reversible Causes Of Pulseless In-Hospital Cardiac Arrest: A Randomized Control Trial Using A Cognitive Aid, Meera Ramachandran

All Theses

More than 200,000 in-hospital cardiac arrests are treated each year in the US with 21% survival rate. According to American Heart Association (AHA) guidelines, many causes for these arrests could be successfully treated if identified early. Such causes can be generalized as 'reversible causes'. Medical doctors identify the reversible causes associated with an arrest by recalling them from memory, using a mnemonic. In this study, using a cognitive aid such as an iPad application, the mnemonic was modified and causes were displayed alphabetically, and tested along with a new method that rank-ordered the reversible causes based on the patient context, …

Go to article

Air Pressure Energy Storage For Reverse Osmosis: Bench-Scale Proof Of Concept, Ying Sun Aug 2013

Air Pressure Energy Storage For Reverse Osmosis: Bench-Scale Proof Of Concept, Ying Sun

All Theses

Society faces diminishing access to clean drinking water because of increasing global population and the development of modern industries. At the same time, climate change and other environmental problems caused by the increase in fossil fuel consumption the emphasis on reducing dependency on traditional energy resources in the process of potable water production. To address both problems, a small-scale wind powered reverse osmosis (RO) desalination system with a unique energy storage mechanism was envisioned to provide an energy buffer such that fluctuating and intermittent wind can be utilized. Energy is stored in the form of compressed air in a pressure …

Go to article

Protocol Development Of A Study Of Loading And Stability Of The Glenoid Inlay Versus Onlay Shoulder System, Breanne Przestrzelski Aug 2013

Protocol Development Of A Study Of Loading And Stability Of The Glenoid Inlay Versus Onlay Shoulder System, Breanne Przestrzelski

All Theses

The large range of pathology associated with the glenohumeral joint has motivated the development of innovative technology to improve stability of the glenohumeral joint. When considering a total shoulder arthroplasty (TSA), an additional choice may be considered: the onlay or inlay glenoid component.
The purpose of this study is to examine the contact pressures and implant stability associated with fatigue loading of these two types of glenoid components. The current standard of choice is that of the onlay design, which sits proud to the surrounding tissue and has a tendency to exhibit a rocking-horse loosening phenomenon. A newer option on …

Go to article

The Development Of A Rapid Fiber-Based Immunoassay As A Point-Of-Care Or In-Home Diagnostic Test, Christopher Waddell Aug 2013

The Development Of A Rapid Fiber-Based Immunoassay As A Point-Of-Care Or In-Home Diagnostic Test, Christopher Waddell

All Theses

Early diagnosis of conditions allows for physicians to treat patients earlier, and ultimately improve patient outcomes. Two conditions of particular interest for earlier and cheaper diagnosis are the influenza virus and human immunodeficiency virus (HIV). Antiviral treatment administered within the first 48 hours of influenza infection decreases symptom severity, risk of complications, and reduced healthcare costs. Early diagnosis of HIV can decrease the risk of transmission of the virus to HIV negative individuals and allow for earlier administration of highly active antiretroviral treatment (HAART), improving patient quality of life and patient outcomes.
Currently, the 'gold standard' for detection of both …

Go to article

Probabilistic Back Analysis Of Geotechnical Systems, Lei Wang Aug 2013

Probabilistic Back Analysis Of Geotechnical Systems, Lei Wang

All Theses

This thesis is aimed at applying the probabilistic approaches for back analysis of geotechnical systems. First, a probabilistic back-analysis of a recent slope failure at a site on Freeway No. 3 in northern Taiwan is presented. The Markov Chain Monte Carlo (MCMC) simulation is used to back-calculate the geotechnical strength parameters and the anchor force. These inverse analysis results, which agree closely with the findings of the post-event investigations, are then used to validate the maximum likelihood method, a computationally more efficient back-analysis approach. The improved knowledge of the geotechnical strength parameters and the anchor force gained through the probabilistic …

Go to article

Continuum Robotic Surface: Forward Kinematic Analysis And Implementation, Jessica Merino Aug 2013

Continuum Robotic Surface: Forward Kinematic Analysis And Implementation, Jessica Merino

All Theses

This thesis presents a new class of biologically inspired robots: continuum robotic surfaces. This work is fueled by the question: can the interaction between robot and environment be advanced with “programmable surfaces in space?” The novelty of continuum robotic surfaces lies in their ability to be actively controlled and reconfigured in what we believe is the current “missing dimension” in robot movements — two–dimensional space. We believe that such surfaces will lend themselves to more complex applications. However, to effectively deploy such surfaces for these complex applications, kinematic models will be necessary to plan and control desired configurations. The forward …

Go to article

Problems In The Study And Use Of Ac Dielectrophoresis And Their Consequences: A Study Based On Comsol Multiphysics Modeling, Vandana Devi Pandian Babu Aug 2013

Problems In The Study And Use Of Ac Dielectrophoresis And Their Consequences: A Study Based On Comsol Multiphysics Modeling, Vandana Devi Pandian Babu

All Theses

Dielectrophoresis (or DEP) is an important phenomenon which is induced when a dielectric particle is placed in a non-uniform electric field. The force generated by DEP has been exploited for various micro and nano fluidics applications like positioning, sorting and separation of particles involved in medical diagnostics, drug discovery, cell therapeutics, biosensors, microfluidics, nanoassembly, particle filtration etc. The integration of DEP systems into the microfluidics enables inexpensive, fast, highly sensitive, highly selective, label-free detection and also the analysis of target bioparticles.

This work aims to provide a complete compilation of the factors affecting the DEP force. It elucidates the underlying …

Go to article

Finite Element Analysis Of Effective Mechanical Properties, Vibration And Acoustic Performance Of Auxetic Chiral Core Sandwich Structures, Hrishikesh Joshi Aug 2013

Finite Element Analysis Of Effective Mechanical Properties, Vibration And Acoustic Performance Of Auxetic Chiral Core Sandwich Structures, Hrishikesh Joshi

All Theses

Honeycomb cellular materials are widely used in engineering applications due to their high strength to weight ratio and controllable effective mechanical properties. The effective properties are controlled by varying the geometry of the repetitive unit cells of honeycomb structure. Sandwich panels made of honeycomb cores are beneficial in many applications including vibration isolation and sound transmission reduction. Sandwich panels with standard honeycomb core configurations have previously been studied with regards to sound transmission behavior. It has been established that the auxetic honeycomb cores, having negative in-plane Poisson's ratio, exhibit higher sound transmission loss as compared to regular honeycomb cores. In …

Go to article

Novel Side-Vent-Channel Based Blast Mitigation Concept For Light Tactical Vehicles, Ramin Yavari Aug 2013

Novel Side-Vent-Channel Based Blast Mitigation Concept For Light Tactical Vehicles, Ramin Yavari

All Theses

A new concept solution for improving survivability of the light tactical military vehicles to blast-loads resulting from a shallow-buried mine detonated underneath such vehicles is proposed and critically assessed using computational engineering methods and tools. The solution is inspired by the principle of operation of the rocket-engine nozzles, in general and the so called 'pulse detonation' rocket engines, in particular, and is an extension of the recently introduced so-called 'blast chimney' concept (essentially a vertical channel connecting the bottom and the roof and passing through the cabin of a light tactical vehicle).
Relative to the blast-chimney concept, the new solution …

Go to article

An Analysis Of A Missing Design Concept For Sustainable Buildings: Addressing The Safety And Health Of The Construction Worker, Christopher Almond Aug 2013

An Analysis Of A Missing Design Concept For Sustainable Buildings: Addressing The Safety And Health Of The Construction Worker, Christopher Almond

All Theses

Construction work is inherently dangerous. The 2010 U.S. Bureau of Labor Statistics show the construction industry had the most fatal injuries of all industry sectors, 17%. U.S. regulations place the responsibility for construction safety on the construction contractor. However, owners and designers have the potential to affect the safety of the construction workforce. Owners have gotten more involved in promoting the safety and health of construction workers in recent years; however, studies show that the safety and health of the construction workforce is not typically considered by designers.
The Naval Facilities Engineering Command (NAVFAC) - the U.S. Navy's systems command …

Go to article

Improved Iterative Detection Techniques For Slow-Frequency-Hop Communications With Reed-Solomon Codes, Madhabi Manandhar Aug 2013

Improved Iterative Detection Techniques For Slow-Frequency-Hop Communications With Reed-Solomon Codes, Madhabi Manandhar

All Theses

The performance of a packet-level iterative detection technique is examined for a slow-frequency-hop packet radio system using interleaved Reed-Solomon codes and per-dwell differential encoding. A per-dwell soft-input-soft-output detector along with successive-erasures decoding results in a system that performs better than previously considered detection techniques in the presence of partial-band interference. The log-MAP algorithm and two forms of its max-log-MAP approximation are considered for the soft-input-soft-output detector along with different channel estimators. The performance and detection complexity of the systems is compared. A limit on the number of erasures allowed in successive-erasures decoding is also considered, and its effect on the …

Go to article

The Extraction Of Acetic Acid From Thermotoga Neapolitana Fermentation Spent Medium Using Fresh/Recovered Aliquat 336 And Produce Cma, Yifan Du Aug 2013

The Extraction Of Acetic Acid From Thermotoga Neapolitana Fermentation Spent Medium Using Fresh/Recovered Aliquat 336 And Produce Cma, Yifan Du

All Theses

To offer an alternative pathway to produce calcium magnesium acetate (CMA) as an environmental friendly deicer to relieve the pressure on fossil fuels demand, a liquid-liquid extraction process was studied. This process includes using Aliquat 336 (tri-n-octylmethylammonium chloride) diluted in kerosene as an organic extractant to extract acetic acid from Thermotoga neapolitana fermentation spent medium, which contained 34 g/L of acetic acid and 10 g/L of NaCl.
The extraction efficiency of Aliquat 336 was studied under several different extraction conditions. The initial pH of the spent medium was adjusted to a pH range of 2.25 to 5.75 with a 0.5 …

Go to article

Describing Plutonium Contamination Issues In Hanford Soils: Development Of A Thermodynamic Surface Complexation Model, Sarah Herr Aug 2013

Describing Plutonium Contamination Issues In Hanford Soils: Development Of A Thermodynamic Surface Complexation Model, Sarah Herr

All Theses

The development of remediation strategies for long-term site management requires knowledge of an actinide's geochemical behavior. Understanding this behavior can lead to the formation of a subsurface transport model. For example, plutonium mobility in the subsurface environment is significantly influenced by oxidation-reduction and complexation reactions. This work considered the surface-mediated reduction of plutonium, as well as the hydrolysis and carbonate complexation of the actinide.
Evaluating the significance of these reactions required several variable pH batch sorption studies. Experiments incorporated plutonium and neptunium sorption to sediments from the Hanford Nuclear Reservation in Washington State. Two different sediments were examined: coarse-grained and …

Go to article

An Assessment Of The Accuracy Of An Automated Bite Counting Method In A Cafeteria Setting, Ziqing Huang Aug 2013

An Assessment Of The Accuracy Of An Automated Bite Counting Method In A Cafeteria Setting, Ziqing Huang

All Theses

Advances in body-worn sensors and mobile health technology have created new opportunities for empowering people to take a more active role in managing their health. Obesity has been recognized as a target of opportunity that could particularly benefit from this approach. Self-monitoring of dietary intake is critical for weight loss/management, but currently used tools such as
food diaries require users to manually estimate and record energy intake, making them subjective, prone to error, and difficult to use for long periods of time. Our group is developing a new tool called
the 'bite counter' that automates the monitoring of caloric intake. …

Go to article

Hydrogen Production By Thermotoga Lettingae Using Spent Fermentation Media Containing Acetic Acid, Archana Ganesh Aug 2013

Hydrogen Production By Thermotoga Lettingae Using Spent Fermentation Media Containing Acetic Acid, Archana Ganesh

All Theses

Biological production of hydrogen (H2) gas from fermentation of agricultural feedstock is one method to produce clean and sustainable source of energy. During fermentation of glucose to H2, acetic acid and carbon dioxide (CO2) by Thermotoga neapolitana, only 33% of the energy contained in glucose is converted to hydrogen. The aim of this study was to use a second thermotogale, Thermotoga lettingaeto ferment sugars and acetic acid in spent media to produce H2. Hydrogen production by this bacterium in fresh and spent media was studied by quantifying the amount of …

Go to article

Impact Of Channel Conditions On Existing Scour Measuring Instruments, Md Nasimul Hoque Chowdhury Aug 2013

Impact Of Channel Conditions On Existing Scour Measuring Instruments, Md Nasimul Hoque Chowdhury

All Theses

Scour around bridge piers and abutments, is the prominent reason for bridge failures. Bridge failures have substantial effects on economy and human lives. About 60% of the total bridge failures in U.S. can be attributed to scour. In the past, scour has been responsible for several million dollars in bridge repair cost. Given the threat to the bridge infrastructure due to scour, the U.S. Federal Highway Administration has proposed several countermeasures to reduce the impact of bed degradation. One of these countermeasures that is particularly relevant during peak flow periods is the real-time scour monitoring. Scour monitoring involves real-time data …

Go to article

Application Of Parameter Estimation And Calibration Method For Car-Following Models, Md Rahman Aug 2013

Application Of Parameter Estimation And Calibration Method For Car-Following Models, Md Rahman

All Theses

Both safety and the capacity of the roadway system are highly dependent on the car-following characteristics of drivers. Car-following theory describes the driver behavior of vehicles following other vehicles in a traffic stream. In the last few decades, many car-following models have been developed; however, studies are still needed to improve their accuracy and reliability.
Car-following models are a vital component of traffic simulation tools that attempt to mimic driver behavior in the real world. Microscopic traffic simulators, particularly car-following models, have been extensively used in current traffic engineering studies and safety research. These models are a vital component of …

Go to article

Modeling Benefits Of Implementing Low Impact Development Practices Within Forecasted Growth Scenarios Of The Reedy River Watershed, Stephen Taylor Aug 2013

Modeling Benefits Of Implementing Low Impact Development Practices Within Forecasted Growth Scenarios Of The Reedy River Watershed, Stephen Taylor

All Theses

For this research, a previously developed comprehensive watershed water quality model for the Reedy River as developed for South Carolina Department of Health and Environmental Control (SCDHEC) and the US Environmental Protection Agency (EPA) as a total maximum daily load (TMDL) assessment tool was used to assess the benefits of using low impact development (LID) designs in future growth of Greenville County, within the Reedy River watershed. The original intent of this model was to provide SCDHEC with a defensible model that could be used to prepare nutrient TMDLs for an area located at Boyd Millpond and the Reedy River …

Go to article

Corrosion Activity In Precast Concrete Elements And Cementitious Closure Pours, Shabi Abbas Udaipurwala Aug 2013

Corrosion Activity In Precast Concrete Elements And Cementitious Closure Pours, Shabi Abbas Udaipurwala

All Theses

The use of prefabricated elements in the construction of highway bridges has been a common practice in the United States since 1950s. Precast concrete adjacent box beam girder bridges are quite popular given that the precast elements not only have structural capacity to span across the supports, but also form the bridge deck. These bridges have generally performed well during the initial years after construction, but recent failures in Pennsylvania and Indiana have aroused a nationwide alarm to investigate the causes of failure and find solutions to repair these bridges or develop design for new replacement bridges. It was found …

Go to article

Lifting-Line Predictions For Induced Drag And Lift In Ground Effect, W. F. Phillips, Doug F. Hunsaker Aug 2013

Lifting-Line Predictions For Induced Drag And Lift In Ground Effect, W. F. Phillips, Doug F. Hunsaker

Mechanical and Aerospace Engineering Faculty Publications

Closed-form relations are presented for estimating ratios of the induced-drag and lift coefficients acting on a wing in ground effect to those acting on the same wing outside the influence of ground effect. The closed-form relations for these ground-effect influence ratios were developed by correlating results obtained from numerical solutions to Prandtl’s lifting-line theory. Results show that these influence ratios are not unique functions of the ratio of wing height to wingspan, as is sometimes suggested in the literature. These ground-effect influence ratios also depend on the wing planform, aspect ratio, and lift coefficient.

Go to article

Electrospun Nanofiber Yarns For Nanofluidic Applications, Chen-Chih Tsai Aug 2013

Electrospun Nanofiber Yarns For Nanofluidic Applications, Chen-Chih Tsai

All Dissertations

This dissertation is centered on the development and characterization of electrospun nanofiber probes. These probes are envisioned to act like sponges, drawing up fluids from microcapillaries, small organisms, and, ideally, from a single cell. Thus, the probe performance significantly depends on the materials ability to readily absorb liquids. Electrospun nanofibers gained much attention in recent decades, and have been applied in biomedical, textile, filtration, and military applications. However, most nanofibers are produced in the form of randomly deposited non-woven fiber mats. Recently, different electrospinning setups have been proposed to control alignment of electrospun nanofibers. However, reproducibility of the mechanical and …

Go to article

Biofabrication Of Scaffolds For Intervertebral Disc (Ivd) Tissue Regeneration, Benjamin Whatley Aug 2013

Biofabrication Of Scaffolds For Intervertebral Disc (Ivd) Tissue Regeneration, Benjamin Whatley

All Dissertations

The ultimate goal of tissue regeneration is to replace damaged or diseased tissue with a cell-based or biomaterial-based tissue that accurately mimics the functionality, biology, mechanics, and cellular and extracellular matrix (ECM) composition of the native tissue. Specifically, the ability to control the architecture of tissue engineered constructs plays a vital role in all of these issues as scaffold architecture has an affect on function, biomechanics, and cellular behavior. Many tissue engineered scaffolds focus on the ability to mimic natural tissue by simulating the ECM due to the fact that in each distinct tissue, the ECM serves as a structural …

Go to article

Synthesis And Characterization Of Thermally Responsive Polymer Layers, Michael Seeber Aug 2013

Synthesis And Characterization Of Thermally Responsive Polymer Layers, Michael Seeber

All Dissertations

Future devices such as biomedical and microfluidic devices, to a large extent, will depend on the interactions between the device surfaces and the contacting liquid. Further, biological liquids containing proteins call for controllable interactions between devices and such proteins, however the bulk material must retain the inherent mechanical properties from which the device was fabricated from. It is well known that surface modification is a suitable technique to tune the surface properties without sacrificing the bulk properties of the substrate.
In the present study, surface properties were modified through temperature responsive polymer layers. After the modification, the surfaces gained switchability …

Go to article

Joint Location And Dispatching Decisions For Emergency Medical Service Systems, Hector Toro-Diaz Aug 2013

Joint Location And Dispatching Decisions For Emergency Medical Service Systems, Hector Toro-Diaz

All Dissertations

Emergency Medical Service (EMS) systems are a service that provides acute care and transportation to a place for definitive care, to people experiencing a medical emergency. The ultimate goal of EMS systems is to save lives. The ability of EMS systems to do this effectively is impacted by several resource allocation decisions including location of servers (ambulances), districting of demand zones and dispatching rules for the servers. The location decision is strategic while the dispatching decision is operational. Those two decisions are usually made separately although both affect typical EMS performance measures. The service from an ambulance is usually time …

Go to article

A Localized Controlled Delivery System Utilizing A Block Copolymer To Improve The Current Paradigm Of Chemotherapy, Jason Olbrich Aug 2013

A Localized Controlled Delivery System Utilizing A Block Copolymer To Improve The Current Paradigm Of Chemotherapy, Jason Olbrich

All Dissertations

The goal of the field of Bioengineering has always been to bring about a better standard of care for patients. As a field encompassing a broad array of researchers and talents, such improvements often are brought about through the integration of different fields. This work advances the integration of controlled delivery and chemotherapy. The use of cytotoxic chemotherapy has become and will continue to be a powerful tool for the treatment of solid malignancies. Conventional dose scheduling of cytotoxic agents and newer biological response modifiers are investigated under a clinical paradigm initially designed to identify a drug dose that elicits …

Go to article

Modeling, Control, And Motion Analysis Of A Class Of Extensible Continuum Manipulators, Apoorva Kapadia Aug 2013

Modeling, Control, And Motion Analysis Of A Class Of Extensible Continuum Manipulators, Apoorva Kapadia

All Dissertations

In this dissertation, the development of a kinematic model, a configuration-space controller, a master-slave teleoperation controller, along with the analysis of the self-motion properties for redundant, extensible, continuous backbone (continuum) ``trunk and tentacle' manipulators are detailed. Unlike conventional rigid-link robots, continuum manipulators are robots that can bend at any point along their backbone, resulting in new and unique modeling and control issues. Taken together, these chapters represent one of the first efforts towards devising model-based controllers of such robots, as well as characterizing their self-motion in its simplest form.
Chapter 2 describes the development of a convenient set of generalized, …

Go to article

First Prev Next Last