Engineering Commons^™

Characterization And Performance Nanofiltration Membranes In Water Quality For Goldfish (Carassius Auratus) Aquaculture, Inpita Casuarina Eqisetia Utari, Uun Yanuhar, Asus Maizar Suryanto Hertika, Heru Suryanto, Jibril Maulana, Nico Rahman Caesar, Mahrus Ismail, Leong-Seng Lim

Journal of Mechanical Engineering Science and Technology (JMEST)

Water quality is an important factor in aquaculture activities, including goldfish (Carassius auratus) farming. One approach to improving water quality is the use of nanofilters. This study aims to evaluate the performance of nanofilters made from Sargassum sp. with the addition of copper oxide nanoparticles. The method used involves the fermentation of bacterial cellulose from Acetobacter xylinum using Sargassum sp. extract as a medium, followed by homogenization and the addition of CuO-NPs at concentrations of 0.5%, 1%, and 1.5%, and subsequent oven drying. The nanofilter membrane will then be analyzed using SEM, XRD, and FTIR to characterize its properties. Performance …

The Potential Of Ramie Fiber As Reinforcement In Calcium Carbonate-Filled Polyester Resin Matrix Composites For Roofing Applications, Reinaldo Reinaldo, Djoko Setyanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Polymer matrix composite roofing materials available in the Indonesian market typically consist of 30%wt chopped strand mat glass fiber embedded in unsaturated polyester resin, filled with 30 parts per hundred resin (PHR) calcium carbonate. The aim of this research is to evaluate whether natural ramie fibers can potentially replace glass fibers. In the first stage of the study, we compared three types of natural fibers abundant in Indonesia: banana stem fibers, sugarcane bagasse, and ramie. Showed that ramie fiber performed the best. Its flexural strength, flexural modulus, and impact toughness were the highest, measured at 191.57 MPa, 6691 MPa, and …

Captivating Combustion Traits Of Bio-Oil Droplets Enriched With Bio-Additives From The Areca Shell Waste, Muhammad Alif Raehan, Helen Riupassa, Hendry Y. Nanlohy

Journal of Mechanical Engineering Science and Technology (JMEST)

Fuel derived from crude vegetable oil, such as coconut oil, holds promise as an alternative energy source to mitigate the increasing reliance on fossil fuels driven by population growth and industrial activities. The experiment involved suspending a single droplet of crude coconut oil mixed with activated carbon from areca shell waste and placed at the junction on R-type thermocouple (Pt/Pt-Rh13%). The droplets were ignited using a hot wire and subjected to atmospheric pressure and room temperature. Coconut oil comprises a saturated triglyceride carbon chain compound of approximately 91%, and areca shell waste possesses a porous structure that fosters favorable interactions …

Characterization Of Hydroxyapatite Derived From Scallop Shell Waste Synthesized By Sonochemical Method With Different Temperature Calcination, Diki Dwi Pramono, Poppy Puspitasari, Aminnudin Aminnudin, Jeefferie Abd Razak

Journal of Mechanical Engineering Science and Technology (JMEST)

One common bio-ceramic material used in the biomedical industry is hydroxyapatite. Because of its crystallographic and molecular resemblance to the hard tissues of the human body, hydroxyapatite is thought to form. Scallop shells are one natural source of hydroxyapatite, which is high in calcium. This study examines how the calcination temperature affects the characteristics of hydroxyapatite made from leftover scallop shell. Hydroxyapatite was synthesized via the sonochemical method, with calcination conducted at temperatures of 900°C, 1000°C, and 1100°C. The hydroxyapatite that was prepared was assessed using Xray diffraction (XRD) to determine the phase and crystallite size, Scanning Electron Microscopy (SEM) …

The Role Of Banana Peel Surface Pores Through Increasing Temperature For Efficient Hydrogen Production, Abid Fahreza Alphanoda, Erlanda Augupta Pane, Agus Riyanto, Avita Ayu Permanasari

Journal of Mechanical Engineering Science and Technology (JMEST)

Porous carbon derived from banana peel has been synthesized by increasing the temperature range variation from 180 oC - 270 oC. The prepared carbon was tested in an experiment using double-chamber photoelectrochemistry to see the results of hydrogen production. SEM-EDX, FTIR, and TGA analyses identified all banana peel carbons. Optical and electrochemical properties were analyzed and measured by UV-Vis, Tauc Relationship, and Pearson Absolute Electronegativity. The amount of hydrogen gas produced from the simulation of UV-A visible light irradiation on variations of BP-240, BP-210, BP-180, and BPNatural. The surface of BP-270 has more pores and can produce the most significant …

Impact Of Natural Polymer Proportions On The Fire-Retardant Properties Of Bioplastics, I Gusti Ngurah Nitya Santhiarsa, Ni Made Dwidiani, I Gusti Ngurah Putu Tenaya, I Gede Artha Negara

Journal of Mechanical Engineering Science and Technology (JMEST)

This research investigates the influence of varying proportions of natural polymers on the fire-retardant properties of bioplastic. Tapioca starch (Manihot esculenta) and corn starch (Zea mays) were selected as the bioplastic materials, with different weight fractions employed in the analysis. These materials, as naturally occurring polymers, are biodegradable and serve as promising components in the development of bioplastics. Fire resistance testing was conducted in accordance with ASTM D635-03, utilizing weight ratios of tapioca to corn starch at 70:30, 60:40, and 50:50. The results included photographic documentation of each specimen alongside the corresponding outcomes from the fire resistance tests. These images …

Analysis Of Titanium Mesh Ti6al4v Formation Using Die Press Forming Machine For Cranioplasty, Ahmad Ayyub Syaiful Rizal, Mahros Darsin, Robertoes Koekoeh K. Wibowo, Khairul Anam

Journal of Mechanical Engineering Science and Technology (JMEST)

Cranioplasty is required for patients with head defects, where the deformed part of the head is replaced with Ti6Al4V titanium wire implants. The titanium wire forming process is usually done manually, which can take a long time and give results that do not match the anatomical shape of the head. Therefore, it is important to develop domestic technology that can produce titanium wire automatically. This study aims to analyze the frame and mold of the automatic wire mesh molding machine before production. The tool is made using press forming method and finite element analysis with ANSYS software. The machine frame …

The Effect Of Mixing Time And Rotation Speed On The Consistency Of Dough Viscosity In A Horizontal Mixer, Muhammad Akhlis Rizza, Ekky Yovianto Dharsono, Anggit Murdani, Ratna Monasari, Radhi Nurvian Amrullah, Supa Kusuma Aji, Dian Noorvy Khaerudin

Journal of Mechanical Engineering Science and Technology (JMEST)

Cassava must go through several manufacturing processes before it becomes chips on the market, including the process of stirring the dough. The stirring process is an important stage in various food industries. In the stirring process, the viscosity change in the dough is influenced by various factors, including the stirring process time and speed in stirring. Research on dough viscosity is important because it is directly related to the quality of the final product. The purpose of this study is to provide recommendations to users, both in the context of using horizontal mixers and the process of making similar products. …

Tactical Activities To Improve The Effectiveness Of Concrete Batching Plant Based On Overall Equipment Effectiveness Analysis, Yurida Ekawati, Iddo Christian Sutrisno, Teguh Oktiarso

Journal of Mechanical Engineering Science and Technology (JMEST)

The growth of infrastructure projects has led to an increased demand for ready-mix concrete. A company that produces ready-mix concrete using a batching plant encountered difficulties in fulfilling customer orders due to the high rate of machine downtime. Overall equipment effectiveness (OEE) was employed to examine these issues at the tactical activities, where the root causes of losses that occur in the OEE components of availability, performance, and quality were addressed. The OEE analysis was extended to encompass maintenance effectiveness measures, as the anticipated solution to the problem was not the replacement of the machine, but rather an enhancement of …

Friction Modeling Of Composite Brake Pads With Ulin Wood Powder (Eusideroxylon Zwageri), Muhammad Rezki Fitri Putra, Hajar Isworo, Muhamad Noor Yasin, Rachmat Subagyo

Journal of Mechanical Engineering Science and Technology (JMEST)

This study investigates the performance of composite brake pads made of Ulin (Eusideroxylon zwageri) sawdust using simulation modeling, focusing on the pressure distribution, frictional stress, and contact state in five brake pad designs (DS0 to DS4). The brake pad designs used U-shaped grooves to improve cooling efficiency and debris removal. The results show that DS1 and DS2 exhibit the most uniform pressure distribution, with maximum values of 0.045 MPa and 0.048 MPa, respectively. DS1 recorded the highest peak frictional stress at 2.53 × 10-8 MPa, while DS2 showed consistent stress stability, reducing the possibility of uneven wear. DS3 achieved a …

The Influence Of Sodium Chloride Treatment On The Sisal Fiber Bundle’S Properties, Tamaryska Setyayunita, Heru Suryanto, Aminnudin Aminnudin

Journal of Mechanical Engineering Science and Technology (JMEST)

Currently, composite board manufacturing using natural fiber has the potential to be expanded due to environmental awareness. To produce high-performance natural fiber, treatment is needed to improve natural fiber’s mechanical and physical properties. One of chemical treatments is by using sodium chloride (NaCl). This study aimed to investigate the characteristics of sisal fiber after NaCl treatment. The concentrations of NaCl treatment were 1, 3, and 5 (wt.%) at room and boiling temperature and the soaking duration was 1 hour. Meanwhile, tensile strength, strain, and Young’s modulus were tested to evaluate the mechanical properties. Fiber bundle diameter, weight change due to …

E-Learning Management Technology Integration For Laboratory Usage, Mohammed Khaleel Hussein, Mohammed Ahmed Subhi, Saleh Mahdi Mohammed, Mayasah Al-Khateeb

Iraqi Journal for Computer Science and Mathematics

E-learning systems have transformed educational sectors and more interestingly, the use of these educational platforms for laboratory-based practices has been trending in the last couple of years. Laboratory-usage e-learning system has various tremendous benefits such as the skill of accessibility utilization and practical experimentation simulation. Several intelligent tasks still need to be tackled to make the most of it. One of the biggest problems is how to recreate hands-on experience in a virtual or remote environment. Some e-learning systems offer simulations and virtual experiments but may also require additional tactile feedback through interaction with physical equipment for this challenge, it …

The Significance Of Cannibalism, Panic, And Sanctuary In The Interactions Between Prey And Predator With A Stage Structure, Ahmed Sami Abdulghafour, Raid Kamel Naji

Iraqi Journal for Computer Science and Mathematics

This paper analyzes a novel prey-predator model that takes into account the predator's stage structure, cannibalism within the predator population, panicky behavior, and the existence of a sanctuary where the prey might hide from the predator. The Holling type II functional response is used in the predation process. The behavior of the identified fixed points of the proposed system has been closely analyzed. The analysis focuses on the local stability and potential bifurcations that could happen close to the system's fixed points. The Lyapunov function approach is used to investigate the fixed-point stability zone globally. Numerical simulations were run to …

Author Spotlight, Li-Fang Yang, Joseph W. Sampson, Xiao-Hang Sun, Hai-Qiang Deng, He Zhang, Md Maksudur Rahman, Yang Tao, Hang Ren

Journal of Electrochemistry

No abstract provided.

Single-Entity Collisional Electrochemistry At The Micro- And/Or Nano-Interface Between Two Immiscible Electrolyte Solutions, Li-Fang Yang, Jun-Jie Chen, Ling-Yu Chen, Si-Qi Jin, Tao-Xiong Fang, Si-Jia He, Liang-Jun Shen, Xin-Jian Huang, Xiao-Hang Sun, Hai-Qiang Deng

Journal of Electrochemistry

Single-entity collisional electrochemistry (SECE) is a branch of single-entity electrochemistry. It can directly characterize entities/particles with single particle resolution through random collisions between particles and electrodes in a solution, and obtain rich physicochemical information, thus becoming one of the frontiers of electroanalytical chemistry in the past two decades. Interestingly, the (micro/nanoscale) sensing electrodes have evolved from a polarizable liquid/ liquid (mercury/liquid) interface to a solid/liquid interface and then to a liquid/liquid interface (i.e., an interface between two immiscible electrolyte solutions, ITIES), as if they have completed a cycle (but in fact they have not). ITIES has become the latest sensing …

Precision Delivery Using Nanopipette For Single-Cell Studies, He Zhang, Maksudur Rahman, Yang Tao, Joseph W Sampson, Hang Ren

Journal of Electrochemistry

Nanopipette based scanning probe technique is a versatile tool in non-contact imaging in biology. In addition to the topographic imaging, its capability of localized delivery of bio-active molecules is emerging. In this mini review, we introduce the applications of nanopipette in single-cell researches with a focus on localized delivery. The working principles of three delivery modes including resistive pulse, pressure-driven flow, and electroosmotic flow-driven delivery are summarized and compared. Their applications in single-cell researches are reviewed. The current technical challenges in scanning ion conductance microscopy-based delivery, and their growing influence in medicine and pharmacologic researches are also discussed.

Aqueous Supercapacitors With Wide Operative Voltage Window And Long Cycling Life Enabled By Electrolyte Hybridization Effect, Shi-Hua Ma, Qi Yin, Jin-Ping Zhao

Journal of Electrochemistry

Developing supercapacitors (SCs) with long cycling life and wide operative voltage window is a significant topic in the field of aqueous electrolytes. Although the design of water in salt (WIS) electrolytes has pushed the development of aqueous electrolytes to a new height, the WIS electrolytes with an operative voltage window of up to 2.5 V is still very scarce. Herein, in order to enrich the type of aqueous electrolyte with high operative voltage, tetramethylammonium trifluoromethanesulfonate (TMAOTf) based WIS electrolyte was used as a model to construct WIS based hybrid electrolyte with acetonitrile (ACN) co-solvent and LiTFSI co-solute. In view of …

Preface To Special Issue On Single-Entity Electroanalysis, Fei Li, Yi-Lun Ying, Yi-Ge Zhou

Journal of Electrochemistry

No abstract provided.

Journal Of Electrochemistry, The Flagship Journal Of Chinese Chemical Society Electrochemical Committee, Made A Public Appearance At The 22nd National Electrochemical Congress, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

The Award Ceremony Of The 2nd Xiamen University Short Video Abstract Contest For Science And Technology Journal Papers Came To A Successful Conclusion, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

The 9th National Conference Of Solid State Battery Successfully Held In Xiamen, Fujian, Zheng-Liang Gong

Journal of Electrochemistry

No abstract provided.

Juegos De Rol En El Desarrollo De Projectpipe: Una Inmersión En El Uso De Metodologías De Diseño, Julieth A. Gómez Hernández, Cristian C. Orozco Ospina, Nicolas Restrepo Henao

Journal of Roleplaying Studies and STEAM

En el entorno digital actual, la evolución del concepto de juegos de rol ha llevado al desarrollo de aplicaciones web interactivas y educativas. En sintonía con este planteamiento, se presenta la siguiente propuesta, que adopta una metodología integrada para aprovechar la versatilidad del método de Bruno Munari y el Diseño Centrado en el Usuario (DCU). La metodología de Munari descompone la gestión macro del proyecto en pasos manejables; mientras que el DCU se enfoca en la creación de una interfaz intuitiva y funcional mediante prototipos iterativos y pruebas continuas de usabilidad. Como complemento a estas estrategias se integra la metodología …

Journal Of Roleplaying Studies And Steam (Jrpssteam) Vol. 3 [2024], Número 2 (Issue 2)., Cristo Leon, Miguel A. Bastarrachea-Magnani

Journal of Roleplaying Studies and STEAM

Editorial - La última y nos movemos

Siempre es difícil asumir y enfrentar los cambios, desde el primer número y junto a un gran comité editorial nos dimos a la tarea de lanzar y mantener una revista académica exitosa, con rigor académico y que sirviera por un lado como un espacio para publicar trabajos académicos serios sobre juegos de rol y por el otro como un referente académico sobre el tema, en ese sentido, no tengo la menor duda de que lo hemos logrado.

Para este número, la principal sorpresa es que dejo de ser el editor en jefe, esto …

Efficient Operation Of The Stand-Alone Solar Photovoltaic Power System, Tasneem Mohammed Abed Al-Ezaby, Saad Saad Eskander, Mohammed Adel El-Sayes

Mansoura Engineering Journal

Due to the instability in the amount of solar radiation and the need for battery units to steady the required energy to supply the load the cost of the photovoltaic system construction and operation has increased by at least 60%, an optimal operation for sizing the photovoltaic system has been presented to reduce the number of battery units and utilize the solar cell panels to the maximum. The characteristic behavior of the PV system has been studied and the load curve has been presented. Based on the results we achieved our purpose. A suitable program has been offered and the …

Secure Blind Medical Image Watermarking Using Hybrid Feature Extraction Techniques, Sawsan D. Mahmood, Yassine Aribi, Fadoua Drira, Adel M. Alimi

Iraqi Journal for Computer Science and Mathematics

Watermarking offers great potential for medical images by embedding identifiable information that ensures secure and authenticated sharing of patient data while maintaining both integrity and diagnostic quality. In this paper, we present an innovative framework for blind medical image watermarking that harnesses advanced feature extraction techniques, including K-Means clustering, BRISK (Binary Robust Invariant Scalable Key-points), GFTT (Good Features to Track), and chaotic systems algorithms.

We conducted extensive experiments on the Ocular Disease Intelligent Recognition (ODIR) dataset, focusing specifically on Retinal Optical Coherence Tomography (OCT) images. The results highlight the framework's ability to preserve image quality and diagnostic utility, with minimal …

Notes For Contributors To Space & Defense

Space and Defense

No abstract provided.

Front Matter, Damon Coletta

Space and Defense

No abstract provided.

Convolutional Neural Networks For Dementia Severity Classification: Ordinal Versus Regular Methods, Ambresh Bhadrashetty, P. Sandhya

Iraqi Journal for Computer Science and Mathematics

Dementia, a chronic neurodegenerative disorder, progressively impairs cognitive functions such as memory, reasoning, learning, and recall, placing a significant burden on patients and healthcare systems. Early and accurate classification of dementia severity is crucial for personalized care and intervention. This study introduces a novel Convolutional Neural Network (CNN) designed to classify dementia into four ordinal severity levels (None, Very Mild, Mild, and Moderate) based on MRI brain scans. Utilizing the extensive Open Access Series of Imaging Studies (OASIS) dataset, which includes 86,437 MRI scans (67,222 ‘none,’ 13,725 ‘very mild,’ 5,002 ‘mild,’ and 488 ‘moderate’), our model addresses severe class imbalance …

New Three-Parameter Exponentiated Benini Distribution: Properties And Applications, Elif Yıldırım, Gamze Özel, Christophe Chesneaul, Farrukh Jamal, Ahmed M. Gemeay

Iraqi Journal for Computer Science and Mathematics

Modeling of some rarely occurring environmental events, obtaining and analyzing accurate predictions is quite important in determining the nature of such events and taking measures accordingly. Modeling these rarely occurring environmental events with the statistical distributions in the literature may cause some problems. For this reason, different statistical distributions are needed for modeling this type of rare data. In this paper, a new three-parameter exponentiated Benini distribution based on the exponential family is proposed as a new lifetime distribution. It is called the three-parameter exponentiated Benini distribution. Although new distributions are derived by different methods in the literature, there is …

Investigating Intrusion Detection System Using Federated Learning For Iot Security Challenges, Mohammed Q. Mohammed, Zena Abd Alrahman, Aouf R. Shehab

Iraqi Journal for Computer Science and Mathematics

The Internet of Things (IoT) is a decentralized and ever-changing network, which poses challenges in terms of security. The input highlights the need for robust security measures to protect IoT devices and their data from potential threats. The study focuses on Federated Learning (FL) technology as a potential solution to enhance IoT security. FL models are designed to protect sensitive data while allowing its exchange with other systems, making it a promising approach for securing IoT environments. Additionally, the input suggests the implementation of intrusion detection systems (IDS) as an additional strategy to enhance overall IoT security. By combining FL …