Engineering Commons^™

Environmental Effects On Mechanical And Thermal Behaviors Of Zinc Oxide Nanobelts And Dispersion Of Carbon Nanostructures, Yingchao Yang

Theses and Dissertations

One-dimensional (1-D) nanostructures, such as nanowires, nanobelts, and nanotubes of different materials, have significant applications as nanoscale interconnects and active/functional components of electronic and optoelectronic devices, sensors, actuators, nanoelectromechanical systems (NEMS), and energy generation/conversion systems. The thermal and mechanical stabilities of those nanodevices and nanoenabled energy systems are of both theoretical and practical interests. Thermodynamic properties of nanomaterials are different from those of bulk materials. As the size of a solid particle reduces to the nanometer scale, the surface-to-volume ratio increases and the melting temperature may remarkably decrease. The functionality and/or reliability of those nanodevices and nanoenabled energy systems are …

Comparison Of A Particle Filter And Other State Estimation Methods For Prognostics Of Lithium-Ion Batteries, Eric Alan Walker

Theses and Dissertations

A particle filter (PF) is shown to be more accurate than non-linear least squares (NLLS) and an unscented Kalman filter (UKF) for predicting the remaining useful life (RUL) and time until end of discharge voltage (EODV) of a Lithium-ion battery. The three algorithms track four states with correct initial guesses and 5% variation on the initial guesses. The more accurate prediction performance of PF over NLLS and UKF is reported for three Lithium-ion battery models: a data-driven empirical model, an equivalent circuit model, and a physics-based single particle (SP) model.

Emulation Of An Aeroderivative Twin-Shaft Gas Turbine Engine Using An Ac Electric Motor Drive, Blanca A. Correa

Theses and Dissertations

This dissertation presents a method to use an electric motor to emulate the steady-state and transient shaft power characteristics of an aeroderivative twin-shaft turbine engine. Model-based control provides the framework for developing an aeroderivative twin-shaft engine emulation system. Criteria are developed to appropriately specify the motor and variable-speed drive, based on torque, power, and inertia. This method accounts for the difference in inertia between the engine and the emulating motor; it establishes for the first time the nominal and peak torque requirements of the machine and the peak power and current requirements of the electronic motor drive (inverter).

Our results …

Structural Health Monitoring Of Composite Laminates Using Piezoelectric And Fiber Optics Sensors, Catalin Roman

Theses and Dissertations

This research proposes a new approach to structural health monitoring (SHM) for composite laminates using piezoelectric wafer active sensors (PWAS) and fiber optic bragg grating sensors (FBG). One major focus of this research was directed towards extending the theory of laminates to composite beams by combining the global matrix method (GMM) with the stiffness transfer matrix method (STMM). The STMM approach, developed by Rokhlin et al (2002), is unconditionally stable and is more computationally efficient than the transfer matrix method (TMM). Starting from theory, we developed different configurations for composite beams and validated the results from the developed analytical method …

Multi-Physicochemical Modeling Of Solid Oxide Fuel Cells And Electrolyzer Cells, Yuanyuan Xie

Theses and Dissertations

Multi-physicochemical models are developed for solid oxide fuel cells and electrolysis cells. The models describe the complicated transport processes of charge (electron/ion) conservation, mass/species conservation, momentum conservation, and energy conservation. Transport processes are coherently coupled with chemical reforming processes, surface elementary reaction processes, as well as electro-oxidation processes of both hydrogen and carbon monoxide. The models are validated with experimental data and utilized for fundamental mechanism studies of SOFCs fueled with different type of fuels, such as hydrogen, hydrocarbon, e.g., methane, H2S, and their mixtures. The fundamental mechanisms associated with syngas generation using electrolysis cell are also extensively investigated using …

Welding Parameters, Distortion And Mechanical Properties Of Aa7075 Lap Joints In Ssfsw, Hejun Yu

Theses and Dissertations

Friction Stir Welding (FSW), first invented by The Welding Institute of UK (TWI) in 1991, is a solid state welding process which was initially applied to welding Aluminum Alloy. FSW has wide application in industrial sectors. Stationary shoulder friction stir welding (SSFSW) was first developed to weld low thermal conductivity Ti-based alloys, which are hard to weld using conventional friction stir welding. Previous literatures showed SSFSW can produce uniform temperature distribution through thickness during the welding process. Since SSFSW is still under study phase, its advantages and disadvantages are not yet well defined. It is important to study the characteristics …

Development Of Proteomic Characterization And Speciation Techniques Utilizing Tryptic Peptides With Maldi-Tof Ms And Lc-Esi Ms-Ms, Jennifer Marie Kooken

Theses and Dissertations

The characterization of microbes which can be opportunists and pathogens (e.g., methicillin resistant Staphylococcus aureus (MRSA)) is important in understanding and potentially treating diseases caused by various bacterial species. Common genera found in the human skin micro-biome include Micrococcus and Staphylococcus, but there only a limited number of tests to differentiate these genera and/or species. My research reflects methods development from distinguishing one closely related genera from another and then expanded to species identification. Tryptic peptides were analyzed by MALDI TOF MS and the mass profiles compared with those of a reference strain in both genus and species identification. Aconitate …

The Effect Of Αct-1 Peptide On Bone Marrow Stromal Cells Following Injury, Adam Clay Vandergriff

Theses and Dissertations

Connexin43 (Cx43) is a component of gap junctions and is involved in intercel- lular signaling following injury to tissues. The carboxyl terminus of Cx43 binds to the PDZ2 domain of ZO-1 in order to form gap junction plaques and connect to the cytoskeleton. A biomimetic peptide known as αCT-1, replicating the last 9 amino acids found in the carboxyl terminus of CX43, has been shown to improve wound healing by preferentially binding to the PDZ2 domain of ZO-1. A possible mecha- nism for its action is through the Epithelial-Mesenchymal Transformation (EMT). Scratch assays were performed on rat bone marrow stromal …

Accelprint:Accelerometers Are Different By Birth, Sanorita Dey

Theses and Dissertations

This paper submits a hypothesis that smartphone accelerometers possess unique fingerprints. We believe that the fingerprints arise from hardware imperfections during the sensor manufacturing process, causing every sensor chip to respond differently to the same motion stimulus. The differences in responses are subtle enough that they do not affect most of the higher level functions computed on them. Nonetheless, upon close inspection, these fingerprints emerge with consistency, and can even be somewhat independent of the stimulus that generates them. Measurements and classification on 80 standalone accelerometer chips, 25 Android phones, and 2 tablets, show precision and recall upward of 96%, …

Accelerating Short Read Mapping Using A Dsp Based Coprocessor, Shaun I. Gause

Theses and Dissertations

Advances in next generation sequencing technologies have allowed short reads to be generated at an increasing rate, shifting the bottleneck of the sequencing process to the short read mapping computations. High costs and extended processing times drive researchers to pursue more efficient solutions with an overall goal of a short read mapping architecture capable of processing short reads as they are generated. Digital signal processors have shown high performance capabilities while maintaining low power consumption in a wide field of applications. This thesis explores the use of a DSP accelerated exact match short read mapping algorithm, focusing on a performance …

3d Grain Segmentation In Superalloy Images Using Multichannel Edge-Weighted Centroidal Voronoi Tessellation Based Methods, Yu Cao

Theses and Dissertations

Accurate grain segmentation on 3D superalloy images is very important in materials science and engineering. From grain segmentation, we can derive the underlying superalloy grains' micro-structures, based on which many important physical, mechanical and chemical properties of the superalloy samples can be evaluated. However, grain segmentation is usually a very challenging problem since: 1) even a small 3D superalloy sample may contain hundreds of grains; 2) carbides and noises may degrade the imaging quality; and 3) the intensity within a grain may not be homogeneous. In addition, the same grain may present different appearances, i.e. intensities, under different microscope settings. …

Syntactic And Semantic Interoperability Among Hydrologic Models, Mostafa Mohamed Elag

Theses and Dissertations

Development of integrated hydrologic models requires coupling of multidisciplinary, independent models and collaboration between different scientific communities. Component-based modeling provides an approach for the integration of models from different disciplines. A key advantage of component-based modeling is that it allows components to be created, tested, reused, extended, and maintained by a large group of model developers and end users. One significant challenge that must be addressed in creating an integrated hydrologic model using a component-based approach is enhancing the interoperability of components between different modeling communities and frameworks. The major goal of this work is to advance the integration of …

Impact Of Curing Time And Curing Stress On The Mechanical Behavior Of Cement-Improved And Cement-Fiber-Improved Soft Soil, Ryan Daniel Starcher

Theses and Dissertations

In order to improve the engineering properties of soft soils, materials, such as cement and fiber, can be introduced to the soil mass. Currently, design criterion for a cement-soil mixture requires only the measurement of unconfined compressive strength. This simple measurement may not be adequate to describe the behavior that results from differing field loading conditions. A series of consolidation tests and unconfined compression tests were conducted with special attention being paid to the effects of curing time and vertical curing stress. It is shown that the introduction of cement into soft soils results in decreased compressibility and increased unconfined …

Quantifying Regional-Scale Water Storage Using Models And Observations: Application For Drought Assessment In South Carolina, Mirza Md Mozaddid Billah

Theses and Dissertations

Hydrologic models are widely used to determine the occurrence and severity of droughts, and to aid in the decision making process for reducing drought impacts. These models apply approaches including water and energy balance equations to determine water availability at field to continental scales. One challenge in implementing hydrologic models at larger scales (regional to continental) is the lack of data with sufficient spatial and temporal resolution to represent actual conditions within the modeling domain. If such data is available, the challenge remains how best to find, access, and process the data so that it can be used within hydrologic …

Fabrication And Characterization Of Surrogate Fuel Particles Using The Spark Erosion Method, Kathryn Elizabeth Metzger

Theses and Dissertations

In light of the disaster at the Fukushima Daiichi Nuclear Plant, the Department of Energy's Advanced Fuels Program has shifted its interest from enhanced performance fuels to enhanced accident tolerance fuels. Dispersion fuels possess higher thermal conductivities than traditional light water reactor fuel and as a result, offer improved safety margins. The benefits of a dispersion fuel are due to the presence of the secondary non-fissile phase (matrix), which serves as a barrier to fission products and improves the overall thermal performance of the fuel. However, the presence of a matrix material reduces the fuel volume, which lowers the fissile …

Pellet Cladding Mechanical Interactions Of Ceramic Claddings Fuels Under Light Water Reactor Conditions, Bo-Shiuan Li

Theses and Dissertations

Ceramic materials such as silicon carbide (SiC) are promising candidate materials for nuclear fuel cladding and are of interest as part of a potential accident tolerant fuel design due to its high temperature strength, dimensional stability under irradiation, corrosion resistance, and lower neutron absorption cross-section. It also offers drastically lower hydrogen generation in loss of coolant accidents such as that experienced at Fukushima. With the implementation of SiC material properties to the fuel performance code, FRAPCON, performances of the SiC-clad fuel are compared with the conventional Zircaloy-clad fuel. Due to negligible creep and high stiffness, SiC-clad fuel allows gap closure …

Gelation Characteristics And Osteogenic Differentiation Of Stromal Cells In Inert Hydrolytically Degradable Micellar Polyethylene Glycol Hydrogels, Danial Barati

Theses and Dissertations

The use of polyethylene glycol (PEG) hydrogels in tissue engineering is limited by their persistence in the site of regeneration. In an attempt to produce degradable PEG-based hydrogels while preserving the unique properties of PEG, linear (LPELA) and star (SPELA) poly(ethylene glycol-co-lactide) acrylate, star (SPEDA) poly(ethylene glycol-co-dioxanone), star (SPEGA) poly(ethylene glycol-co-glycolide) acrylate as the least hydrophobic and (SPECA) poly(ethylene glycol-co-caprolactone) as the most hydrophobic macromonomers with short hydrophobic segments were synthesized. The hydrogels were characterized with respect to gelation time, modulus, water content, sol fraction, degradation, and osteogenic differentiation of encapsulated marrow stromal cells (MSCs). Chain extension of PEG with …

The Effect Of Bi-Polar Plate And Membrane Materials On Water Transport In Pemfcs, Visarn Lilavivat

Theses and Dissertations

An analysis of liquid water transport and removal in Proton Exchange Membrane Fuel Cells (PEMFCs) as affected by different membranes and the geometry and surface roughness of bipolar plates on is presented. Four topics are considered. First, the channel dimension and shape of various flow fields have been shown to affect the cell performance and the uniformity in the distributions of current. Typical variations in the channel width, height, and undercut that may occur with manufactured metal plates are studied. These sample-to-sample variations and distributions are studied and compared with laboratory-scale graphite plates. The goal of the work is to …

Ultrawideband (Uwb) And Reconfigurable Antennas - New Concepts For Conformal Load Bearing Antenna Structures (Clas), Nicholas Bishop

Theses and Dissertations

Conformal antennas have been increasingly playing an important role in a vast number wireless of communication applications. More specifically, Conformal Load Bearing Antenna Structures (CLAS) have drawn a great deal of interest among researchers and engineers because of their advantages of multiple functionality, e.g. antenna and structure both. The objectives of this thesis are to investigate and design innovative conformal Ultrawideband (UWB) endfire antenna arrays and reconfigurable aperture coupled pixel patch antennas both of which are good candidates for CLAS. First, a broadband VHF-UHF end-fire Yagi-Uda array is proposed for possible air vehicle integration and operation within the 240-465 MHz …

Dislocation Reduction In Silicon Doped High Aluminum Content Algan Layers For Deep Uv Optoelectronic Devices, Hung-Chi Chen

Theses and Dissertations

III-Nitride based deep ultraviolet (UV) light emitting diodes (LEDs) are prospective candidates to replace the conventional bulky, expensive and environmentally harmful mercury lamp as new UV light sources, used in the applications of water and air purification, germicidal and biomedical instrumentation systems, etc. Due to the lack of native substrates and poor carrier injection, AlGaN-based deep UV LED is suffering from low optical power and low overall efficiency, which prevents the availability of low cost, high efficiency deep UV LED on the market.

This dissertation is focused on improving the efficiency of deep UV LEDs, by improving the base template …

Effects Of N-Type Doping On Algan Material Quality, Devendra Diwan

Theses and Dissertations

The field of group III-nitride semiconductors has seen incredible developments during last couple of decades. They are recognized as the most promising materials for a wide field of optoelectronics and electronic devices. Their bandgap ranges from 6.2 eV for AlN to 0.7 eV for InN, covering a wide spectral range from infrared (1.77 mm) to deep ultraviolet (200 nm). Their direct bandgap makes them useful for fabricating optoelectronic devices such as light emitting diodes (LEDs), laser diodes (LDs), and photodetectors. III-nitride semiconductor materials also possess strong bond strengths and exhibit good structural, chemical and thermal stability. These properties make it …

Fault Protection In Dc Distribution Systems Via Coordinated Control Of Power Supply Converters And Bus Tie Switches, Pietro Cairoli

Theses and Dissertations

A new fault protection method responds to the current needs of emerging dc power distribution systems by coordinating electronic power converters and mechanical contactors to rapidly isolate short circuit faults while maintaining continuity of power to loads. This work is important because the increasing performance, higher efficiency, and decreasing cost of electronic power converters have spurred a rediscovery and proliferation of dc power distribution systems. Although dc distribution offers advantages such as higher transmission efficiency, higher power density, higher reliability, and ease of interfacing asynchronous sources, enthusiasm for adopting dc technologies suffers from widespread concern over the means to protect …

Acoustic Emission Source Characterization Of Fatigue Crack Extension In Steel Bridge Material, Md Mozahid Hossain

Theses and Dissertations

The probability of Acoustic Emission (AE) detection associated with fatigue crack extension in steel bridge components is a difficult problem due to the complexity of the AE sources. AE is a very promising technique for structural health monitoring and automated micro-crack detection as it is generated by the material itself, unlike other nondestructive testing techniques (for example impact echo and ultrasonics), which require external input sources. Characterizing the source of AE is an ongoing challenge because AE sensors are not only sensitive to the AE signals but also to mechanical noise and reflections. It is therefore difficult to interpret the …

Liquefaction Potential Of South Carolina Coastal Plain Soils Using Dilatometer Data, Joseph Ronald Williamson

Theses and Dissertations

In recent years much research has been focused on developing the flat plate dilatometer (DMT) as a tool to estimate the liquefaction potential of soils. Currently the DMT is over shadowed by the more accepted methods of estimating liquefaction potential which utilize test data from either the standard penetration test (SPT), cone penetration test (CPT), or shear wave velocity test (Vs). The SPT, CPT, and V_s tests are all well-developed methods of estimating liquefaction potential and are supported by extensive databases; however, the DMT is believed by many researchers to be the superior alternative. Due to the DMT's minimal …

An Analysis Of Constructive Network Formation Models, Gary Fredericks

Theses and Dissertations

We study a family of network formation models to determine how payment rules affect the final network topologies that emerge. In our model a set of nodes starts out without any edges and the nodes must pay for the creation of edges using one of several different payment mechanisms. Example payment mechanisms include one node paying for the whole edge, and the cost being shared equally between the two nodes. We show how the set of networks formed by some payment rules are subsets of those formed by other rules. We also perform extensive empirical tests on networks of up …

Plc Code Vulnerabilities Through Scada Systems, Sidney E. Valentine, Jr.

Theses and Dissertations

Supervisory Control and Data Acquisition (SCADA) systems are widely used in automated manufacturing and in all areas of our nation's infrastructure. Applications range from chemical processes and water treatment facilities to oil and gas production and electric power generation and distribution. Current research on SCADA system security focuses on the primary SCADA components and targets network centric attacks. Security risks via attacks against the peripheral devices such as the Programmable Logic Controllers (PLCs) have not been sufficiently addressed.

Our research results address the need to develop PLC applications that are correct, safe and secure. This research provides an analysis of …

The Anti-Angiogenic Effects Of Sparstolonin B, Henry Rhodes Bateman

Theses and Dissertations

Sparstolonin B (SsnB) is a novel bioreactive compound isolated from Sparganium stoloniferum, an herb historically used in Traditional Chinese Medicine as an anti-tumor agent. SsnB has demonstrated anti-inflammatory properties, inhibiting Toll-like receptor mediated inflammation in isolated macrophages and in mice. Angiogenesis, the process of new capillary formation from existing blood vessels, is dysregulated in many pathological disorders, including atherosclerosis, diabetic retinopathy, and tumor growth. The goal of the project was to investigate the anti-angiogenic effects of SsnB.

The first part of the project utilized in vitro functional assays to study how SsnB affected endothelial cells. SsnB inhibited endothelial cell tube …

Mass Spectrometry And Tandem Mass Spectrometry Characterization Of Protein Patterns, Protein Markers And Whole Proteomes For Pathogenic Bacteria, Jennifer Intelicato-Young

Theses and Dissertations

There have been many recent reviews published on MALDI-TOF MS (matrix assisted laser desorption/ionization time-of-flight) MS (mass spectrometry) for identification of bacteria particularly with relevance to clinical microbiology. MALDI-TOF MS is now a mature technique for bacterial identification with great promise. The purpose of this review is to put into perspective MALDI-TOF MS and other widely used mass spectrometry methods for characterization of proteins. MALDI-TOF MS is used for rapid determination of a mass pattern of proteins for bacterial characterization; these proteins

are generally not identified. Alternatively, after gel separation, MALDI TOF-TOF MSMS (tandem mass spectrometry) or on-line LC-ESI MS-MS …

High Fat Diet Induced Obesity In A Mouse Model For Colorectal Cancer, Kennerly Clinton Patrick

Theses and Dissertations

Obesity is widely correlated with the incidence of colorectal cancer (CRC). The exact mechanisms that link obesity to CRC risk have not yet been fully established, and only a limited number of animal models are available to study pathways involved in obesity-related colon carcinogenesis. The objective of this study was to determine the influence of HFD-induced obesity on AOM/DSS-mediated colorectal tumorigenesis, tumor proliferation, and symptom severity. Male C57BL/6 mice were fed a novel high fat diet, designed to mimic the standard American diet (12 % saturated fat & 28 % unsaturated fat), at 4 weeks of age until 16 weeks …

Design And Analysis Of An Electronically Steerable Microstrip Patch And A Novel Coplanar Waveguide (Cpw) Fed Slot Antenna Array, Hamad Shaban Aldossary

Theses and Dissertations

Conformal Phased Array Antennas (CPAAs) are very attractive for their high gain, low profile, and beam scanning ability while being conformal to their mounting surface. Among them are microstrip patch phased arrays and wideband slot phased arrays which are of particular significance.

In this work, first the study, design, and implementation of a conformal microstrip patch phased array is presented which consists of a high gain beam scanning array implemented using microstrip delay lines controlled using GaAs SPDT switches. Then the study and design of a wideband Coplanar Waveguide (CPW)-fed slot phased array antenna is presented. In both cases the …