Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

University of South Carolina

2006

Articles 1 - 23 of 23

Full-Text Articles in Engineering

Fabrication And Characterization Of Poly(Propylene Fumarate) Scaffolds With Controlled Pore Structures Using 3-Dimensional Printing And Injection Molding, Kee-Won Lee, Shanfeng Wang, Lichun Lu, Esmaiel Jabbari, Bradford L. Currier, Michael J. Yaszemski Oct 2006

Fabrication And Characterization Of Poly(Propylene Fumarate) Scaffolds With Controlled Pore Structures Using 3-Dimensional Printing And Injection Molding, Kee-Won Lee, Shanfeng Wang, Lichun Lu, Esmaiel Jabbari, Bradford L. Currier, Michael J. Yaszemski

Faculty Publications

Poly(propylene fumarate) (PPF) is an injectable, biodegradable polymer that has been used for fabricating preformed scaffolds in tissue engineering applications because of in situ crosslinking characteristics. Aiming for understanding the effects of pore structure parameters on bone tissue ingrowth, 3-dimensional (3D) PPF scaffolds with controlled pore architecture have been produced in this study from computer-aided design (CAD) models. We have created original scaffold models with 3 pore sizes (300, 600, and 900 µm) and randomly closed 0%, 10%, 20%, or 30% of total pores from the original models in 3 planes. PPF scaffolds were fabricated by a series steps involving …

Go to article

A New Class Of Miniature Embedded Inverted-F Antennas (Ifas) For 2.4 Ghz Wlan Application, Mohammed Z. Azad, Mohammod Ali Sep 2006

A New Class Of Miniature Embedded Inverted-F Antennas (Ifas) For 2.4 Ghz Wlan Application, Mohammed Z. Azad, Mohammod Ali

Faculty Publications

A new class of miniature printed embedded inverted-F antennas are proposed for operation in the 2.4-2.485 GHz wireless local-area network band. One of the proposed antennas on FR4 substrate (dielectric constant = 4.4) measures 9.2 mm by 4.1 mm and has a bandwidth of 3.5%. The peak gain of this antenna is 1.4 dBi. An overall size reduction of 70% is achieved compared to a conventional inverted-F antenna. Effects of dielectric loss tangent and material conductivity on the bandwidth and efficiency of these antennas are also investigated. Finally, two embedded antenna elements are analyzed to demonstrate the feasibility for a …

Go to article

The 1.6-Kv Algan/Gan Hfets, N. Tipirneni, Alexei Koudymov, V. Adivarahan, Jinwei Yang, Grigory Simin, Asif Khan Sep 2006

The 1.6-Kv Algan/Gan Hfets, N. Tipirneni, Alexei Koudymov, V. Adivarahan, Jinwei Yang, Grigory Simin, Asif Khan

Faculty Publications

The breakdown voltages in unpassivated nonfield-plated AlGan/GaN HFETs on sapphire substrates were studied. These studies reveal that the breakdown is limited by the surface flashover rather than by the AlGan/GaN channel. after elimination of the surface flashover in air, the breakdown voltage scaled linearly with the gate-drain spacing reaching 1.6 kV at 20 mu m. The corresponding static ON-resistance was as low as 3.4 m Omega(.)cm(2). This translates to a power device figure-of-merit V-BR(2)/R-ON = 7.5 x 10(8) V-2 . n(-1) cm(-2), which, to date, is among the best reported values for an AlGan/GaN HFET.

Go to article

A Compact Digitally Controlled Fuel Cell/Battery Hybrid Power Source, Zhenhua Jiang, Roger A. Dougal Aug 2006

A Compact Digitally Controlled Fuel Cell/Battery Hybrid Power Source, Zhenhua Jiang, Roger A. Dougal

Faculty Publications

A compact digitally controlled fuel cell/battery hybrid power source is presented in this paper. The hybrid power source composed of fuel cells and batteries provides a much higher peak power than each component alone while preserving high energy density, which is important and desirable for many modern electronic devices, through an appropriately controlled dc/dc power converter that handles the power flow shared by the fuel cell and the battery. Rather than being controlled to serve only as a voltage or current regulator, the power converter is regulated to balance the power flow to satisfy the load requirements while ensuring the …

Go to article

Self-Assembled Composite Nano-/Micronecklaces With Sio2 Beads In Boron Strings, Hai Ni, Xiaodong Li Jul 2006

Self-Assembled Composite Nano-/Micronecklaces With Sio2 Beads In Boron Strings, Hai Ni, Xiaodong Li

Faculty Publications

Nano-/micronecklaces with SiO2 beads in boron strings were synthesized by simply sublimating the desired powders in a sealed quartz tube at high temperature. The boron strings have a rectangular cross section with width varying from 80to1000nm while the SiO2 beads bear either spindle or spherical shape with a size ranging from 100nmto5μm. The spacing between the SiO2 beads is uniform in each boron string. Both the boron strings and the SiO2 beads are amorphous and free of defects. The supersaturated vapors of silicon and oxygen induced the SiO2 bead formation.

Go to article

Iii-Nitride Transistors With Capacitively Coupled Contacts, Grigory Simin, Z.-J. Yang, A. Koudymov, V. Adivarahan, M. Asif Khan Jul 2006

Iii-Nitride Transistors With Capacitively Coupled Contacts, Grigory Simin, Z.-J. Yang, A. Koudymov, V. Adivarahan, M. Asif Khan

Faculty Publications

AlGaN∕GaNheterostructure field-effect transistor design using capacitively coupled contacts (C3HFET) is presented. Insulated-gate [C3 metal-oxide-semiconductor HFET(C3MOSHFET)] has also been realized. The capacitively coupled source, gate, and drain of C3 device do not require annealedOhmic contacts and can be fabricated using gate alignment-free technology. For typical AlGaN∕GaNheterostructures, the equivalent contact resistance of C3 transistors is below 0.6Ωmm. In rf-control applications, the C3HFET and especially the C3MOSHFET have much higher operating rf powers as compared to HFETs.C3 design is instrumental for studying the two-dimensional electron gas transport in other wide band gap …

Go to article

Algan/Gan/Algan Double Heterostructure For High-Power Iii-N Field-Effect Transistors, C. Q. Chen, J. P. Zhang, V. Adivarahan, A. Koudymov, H. Fatima, Grigory Simin, J. Yang, M. Asif Khan Jun 2006

Algan/Gan/Algan Double Heterostructure For High-Power Iii-N Field-Effect Transistors, C. Q. Chen, J. P. Zhang, V. Adivarahan, A. Koudymov, H. Fatima, Grigory Simin, J. Yang, M. Asif Khan

Faculty Publications

We propose and demonstrate an AlGaN/GaN/AlGaN double heterostructure (DH) with significantly improved two-dimensional (2D) confinement for high-power III-N heterostructurefield-effect transistors(HFETs). The DH was grown directly on an AlN buffer over i-SiC substrate. It enables an excellent confinement of the 2D gas and also does not suffer from the parasitic channel formation as experienced in past designs grown over GaN buffer layers. Elimination of the GaN buffer modifies the strain distribution in the DH, enabling Al contents in the barrier region well over 30%. For the AlGaN/GaN/AlGaN DH design, the 2D electron gasmobility achieved was 1150 cm2/V s at …

Go to article

Digital Oxide Deposition Of Sio2 Layers For Iii-Nitride Metal-Oxide-Semiconductor Heterostructure Field-Effect Transistors, V. Adivarahan, S. Rai, N. Tipirneni, A. Koudymov, J. Yang, Grigory Simin, M. Asif Khan May 2006

Digital Oxide Deposition Of Sio2 Layers For Iii-Nitride Metal-Oxide-Semiconductor Heterostructure Field-Effect Transistors, V. Adivarahan, S. Rai, N. Tipirneni, A. Koudymov, J. Yang, Grigory Simin, M. Asif Khan

Faculty Publications

We present a digital-oxide-deposition (DOD) technique to deposit high quality SiO2dielectric layers by plasma-enhanced chemical vapor deposition using alternate pulses of silicon and oxygen precursors. The DOD procedure allows for a precise thickness control and results in extremely smooth insulating SiO2 layers. An insulating gate AlGaN∕GaNheterostructurefield-effect transistor(HFET) with 8nm thick DOD SiO2dielectric layer had a threshold voltage of −6V (only 1V higher than that of regular HFET), very low threshold voltage dispersion, and output continuous wave rf power of 15W∕mm at 55V drain bias.

Go to article

Erratum: “Terahertz Studies Of The Dielectric Response And Second-Order Phonons In A Gase Crystal” [Appl. Phys. Lett.87, 182104 (2005)], B. L. Yu, F. Zeng, V. Kartazayev, R. R. Alfano, K. C. Mandal Apr 2006

Erratum: “Terahertz Studies Of The Dielectric Response And Second-Order Phonons In A Gase Crystal” [Appl. Phys. Lett.87, 182104 (2005)], B. L. Yu, F. Zeng, V. Kartazayev, R. R. Alfano, K. C. Mandal

Faculty Publications

No abstract provided.

Go to article

Jamming Sensor Networks: Attack And Defense Strategies, Wenyuan Xu, Wade Trappe, Yanyong Zhang Apr 2006

Jamming Sensor Networks: Attack And Defense Strategies, Wenyuan Xu, Wade Trappe, Yanyong Zhang

Faculty Publications

Wireless sensor networks are built upon a shared medium that makes it easy for adversaries to conduct radio interference, or jamming, attacks that effectively cause a denial of service of either transmission or reception functionalities. These attacks can easily be accomplished by an adversary by either bypassing MAC-layer protocols or emitting a radio signal targeted at jamming a particular channel. In this article we survey different jamming attacks that may be employed against a sensor network. In order to cope with the problem of jamming, we discuss a two-phase strategy involving the diagnosis of the attack, followed by a suitable …

Go to article

A Reconfigurable Distributed Computing Fabric Exploiting Multilevel Parallelism, Charles L. Cathey, Jason D. Bakos, Duncan A. Buell Apr 2006

A Reconfigurable Distributed Computing Fabric Exploiting Multilevel Parallelism, Charles L. Cathey, Jason D. Bakos, Duncan A. Buell

Faculty Publications

This paper presents a novel reconfigurable data flow processing architecture that promises high performance by explicitly targeting both fine- and course-grained parallelism. This architecture is based on multiple FPGAs organized in a scalable direct network that is substantially more interconnect-efficient than currently used crossbar technology. In addition, we discuss several ancillary issues and propose solutions required to support this architecture and achieve maximal performance for general-purpose applications; these include supporting IP, mapping techniques, and routing policies that enable greater flexibility for architectural evolution and code portability.

Go to article

Power Anomaly Effects And Costs In Low-Voltage Mobile Power Systems, Shengyi Liu, Charles H. Singer, Roger A. Dougal Apr 2006

Power Anomaly Effects And Costs In Low-Voltage Mobile Power Systems, Shengyi Liu, Charles H. Singer, Roger A. Dougal

Faculty Publications

Electric power anomalies or disturbances can disrupt the normal operation of equipment, accelerate aging, or even cause outright failures thus resulting in increased costs of maintenance and reduced system reliability. Past research on the effects caused by power anomalies has been mostly focused on industrial, commercial, or residential systems, or on power distribution equipment. A literature survey reveals that there is no comprehensive review related to low-voltage (LV) power systems and utilization equipment applicable to military combat vehicles, such as aircraft and ships. This paper summarizes the results of a new literature survey that focused on the causes, effects, and …

Go to article

Convergence Of Ipsec In Presence Of Resets, Chin-Tser Huang, Mohamed G. Gouda, E.N. Elnozahy Mar 2006

Convergence Of Ipsec In Presence Of Resets, Chin-Tser Huang, Mohamed G. Gouda, E.N. Elnozahy

Faculty Publications

IPsec is the current security standard for the Internet Protocol IP. According to this standard, a selected computer pair (p, q) in the Internet can be designated a “security association”. This designation guarantees that all sent IP messages whose original source is computer p and whose ultimate destination is computer q cannot be replayed in the future (by an adversary between p and q) and still be received by computer q as fresh messages from p. This guarantee is provided by adding increasing sequence numbers to all IP messages sent from p to q. Thus, p needs to always remember …

Go to article

Adaptive Evolution Of Chloroplast Genome Structure Inferred Using A Parametric Bootstrap Approach, Liying Cui, Jim Leebens-Mack, Li-San Wang, Jijun Tang, Linda Rymarquis, David B. Stern, Claude W. Depamphilis Feb 2006

Adaptive Evolution Of Chloroplast Genome Structure Inferred Using A Parametric Bootstrap Approach, Liying Cui, Jim Leebens-Mack, Li-San Wang, Jijun Tang, Linda Rymarquis, David B. Stern, Claude W. Depamphilis

Faculty Publications

Background
Genome rearrangements influence gene order and configuration of gene clusters in all genomes. Most land plant chloroplast DNAs (cpDNAs) share a highly conserved gene content and with notable exceptions, a largely co-linear gene order. Conserved gene orders may reflect a slow intrinsic rate of neutral chromosomal rearrangements, or selective constraint. It is unknown to what extent observed changes in gene order are random or adaptive. We investigate the influence of natural selection on gene order in association with increased rate of chromosomal rearrangement. We use a novel parametric bootstrap approach to test if directional selection is responsible for the …

Go to article

Elastic Modulus Of Amorphous Sio2 Nanowires, Hai Ni, Xiaodong Li, Hongsheng Gao Jan 2006

Elastic Modulus Of Amorphous Sio2 Nanowires, Hai Ni, Xiaodong Li, Hongsheng Gao

Faculty Publications

Amorphous SiO2 nanowires with diameter ranging from 50 to 100 nm were synthesized using chemical vapor deposition(CVD) under an argon atmosphere at atmospheric pressure. Nanoscale three-point bending tests were performed directly on individual amorphous SiO2 nanowires using an atomic force microscope (AFM).Elastic modulus of the amorphous SiO2 nanowires was measured to be 76.6±7.2GPa, which is close to the reported value of the bulk SiO2 and thermally grown SiO2 thin films, but lower than that of plasma-enhanced CVD SiO2 thin films. The amorphous SiO2 nanowires exhibit brittle fracture failure in bending.

Go to article

High-Pressure Torsion-Induced Grain Growth In Electrodeposited Nanocrystalline Ni, X. Z. Liao, A. R. Kilmametov, R. Z. Valiev, Hongsheng Gao, Xiaodong Li, A. K. Mukherjee, J. F. Blingert, Y. T. Zhu Jan 2006

High-Pressure Torsion-Induced Grain Growth In Electrodeposited Nanocrystalline Ni, X. Z. Liao, A. R. Kilmametov, R. Z. Valiev, Hongsheng Gao, Xiaodong Li, A. K. Mukherjee, J. F. Blingert, Y. T. Zhu

Faculty Publications

Deformation-induced grain growth has been reported in nanocrystalline (nc) materials under indentation and severe cyclic loading, but not under any other deformation mode. This raises an issue on critical conditions for grain growth in nc materials. This study investigates deformation-induced grain growth in electrodeposited nc Ni during high-pressure torsion (HPT). Our results indicate that high stress and severe plastic deformation are required for inducing grain growth, and the upper limit of grain size is determined by the deformation mode and parameters. Also, texture evolution suggests that grain-boundary-mediated mechanisms played a significant role in accommodating HPT strain.

Go to article

Combinatorial Study Of Ni-Ti-Pt Ternary Metal Gate Electrodes On Hfo2 For The Advanced Gate Stack, K.-S. Chang, M. L. Green, J. Suehle, E. M. Vogel, H. Xiong, Jason R. Hattrick-Simpers, I. Takeuchi, O. Famodu, K. Ohmori, P. Ahmet, T. Chikyow, P. Majhi, B.-H. Lee, M. Gardner Jan 2006

Combinatorial Study Of Ni-Ti-Pt Ternary Metal Gate Electrodes On Hfo2 For The Advanced Gate Stack, K.-S. Chang, M. L. Green, J. Suehle, E. M. Vogel, H. Xiong, Jason R. Hattrick-Simpers, I. Takeuchi, O. Famodu, K. Ohmori, P. Ahmet, T. Chikyow, P. Majhi, B.-H. Lee, M. Gardner

Faculty Publications

The authors have fabricated combinatorial Ni–Ti–Pt ternary metal gate thin film libraries on HfO2 using magnetron co-sputtering to investigate flatband voltage shift (ΔVfb) , work function (Φm) , and leakage current density (JL) variations. A more negative ΔVfb is observed close to the Ti-rich corner than at the Ni- and Pt-rich corners, implying smaller Φm near the Ti-rich corners and higher Φm near the Ni- and Pt-rich corners. In addition, measured JL values can be explained consistently with the observed Φm variations. Combinatorial methodologies prove to be useful …

Go to article

Elastic Wave Propagation In Sinusoidally Corrugated Waveguides, Sourav Banerjee, Tribikram Kundu Jan 2006

Elastic Wave Propagation In Sinusoidally Corrugated Waveguides, Sourav Banerjee, Tribikram Kundu

Faculty Publications

The ultrasonicwave propagation in sinusoidally corrugated waveguides is studied in this paper. Periodically corrugated waveguides are gaining popularity in the field of vibration control and for designing structures with desired acoustic band gaps. Currently only numerical method (Boundary Element Method or Finite Element Method) based packages (e.g., PZFlex) are in principle capable of modeling ultrasonic fields in complex structures with rapid change of curvatures at the interfaces and boundaries but no analyses have been reported. However, the packages are very CPU intensive; it requires a huge amount of computation memory and time for its execution. In this paper a new …

Go to article

Miniature Circularly Polarized Rectenna With Reduced Out-Of-Band Harmonics, Mohammod Ali, Guangli Yang, Roger A. Dougal Jan 2006

Miniature Circularly Polarized Rectenna With Reduced Out-Of-Band Harmonics, Mohammod Ali, Guangli Yang, Roger A. Dougal

Faculty Publications

Wireless embedded sensors are becoming increasingly important for many safety critical applications. Sensor batteries or capacitors must be charged as needed in order to achieve high data rate communications. A miniature circularly polarized rectenna operating at 5.5 GHz is introduced which, with the help of an integrated band-reject filter, reduces out-of-band harmonic emission significantly. The rectenna has a conversion efficiency of 74% with more than 50 dB out-of-band harmonic suppression at 11 GHz.

Go to article

Modeling Volume Changes In Porous Electrodes, Parthasarathy M. Gomadam, John W. Weidner Jan 2006

Modeling Volume Changes In Porous Electrodes, Parthasarathy M. Gomadam, John W. Weidner

Faculty Publications

A three-dimensional mathematical model is presented to describe volume changes in porous electrodes occurring during operation. Material conservation equations are used to derive governing relationships between electrode dimensions and porosity for deposition/precipitation, intercalation, and ionomer-based electrodes. By introducing a parameter, called the swelling coefficient, the relative magnitudes of the change in electrode dimensions and the change in porosity are determined. The swelling coefficient is design-dependent and measured experimentally for a given cell design. The model is general and forms a critical addition required to extend the existing porous electrode models to include volume change effects. For the special case of …

Go to article

Development Of An Electroless Method To Deposit Corrosion-Resistant Silicate Layers On Metallic Substrates, Swaminatha P. Kumaraguru, Basker Veeraraghavan, Branko N. Popov Jan 2006

Development Of An Electroless Method To Deposit Corrosion-Resistant Silicate Layers On Metallic Substrates, Swaminatha P. Kumaraguru, Basker Veeraraghavan, Branko N. Popov

Faculty Publications

A novel electroless method for depositing corrosion-resistant silicate layers on metallic substrates from aqueous solutions has been developed. The silicate layer was deposited from an aqueous solution of sodium silicate (3.22 weight ratio sodium silicate, 37.5% solution in water from PQ Corporation) and sodium borohydride. The technique is demonstrated by forming a passive film on galvanized steel. Deposition parameters such as concentration of the bath, temperature, and pH have been optimized based on the corrosion characteristics of the final coating. Studies on the coating reveal the formation of a very thin (5 nm) zinc disilicate layer followed by a much …

Go to article

Concurrent Multiple- Issue Negotiation For Internet-Based Services, Jiangbo Dang, Michael N. Huhns Jan 2006

Concurrent Multiple- Issue Negotiation For Internet-Based Services, Jiangbo Dang, Michael N. Huhns

Faculty Publications

Negotiation is a technique for reaching a mutually beneficial agreement among autonomous entities. In an Internet-based services context, multiple entities are negotiating simultaneously. The concurrent negotiation protocol extends existing negotiation protocols, letting both service requestors and service providers manage several negotiation processes in parallel. Colored Petri nets, which have greater expressive power than finite state machines and offer support for concurrency, represent the negotiation protocol and facilitate the analysis of desirable properties.

Go to article

An Experimental Investigation Of Guided Wave Propagation In Corrugated Plates Showing Stop Bands And Pass Bands, Tribikram Kundu, Sourav Banerjee, Kumar V. Jata Jan 2006

An Experimental Investigation Of Guided Wave Propagation In Corrugated Plates Showing Stop Bands And Pass Bands, Tribikram Kundu, Sourav Banerjee, Kumar V. Jata

Faculty Publications

Nonplanar surfaces are often encountered in engineering structures. In aerospace structures, periodically corrugated boundaries are formed by friction-stir-welding. In civil engineering structures, rebars used in reinforced concrete beams and slabs have periodic surface. Periodic structures are also being used to create desired acoustic band gaps. For health monitoring of these structures, a good understanding of the elastic wave propagation through such periodic structures is necessary. Although a number of research papers on the wave propagation in periodic structures are available in the literature, no one experimentally investigated the guided wave propagation through plates with periodic boundaries and compared the experimental …

Go to article