Engineering Commons^™

Effects Of Β-Cyclodextrin As A Capping Agent On The Antibacterial Properties Of Agnps, Swarna Jaiswal, Brendan Duffy, Patrick Mchale

Conference Papers

No abstract provided.

Improving Core Skills In Apprentice Education, Peter Kenny

Conference Papers

Many Motor trade apprentice students enter the later years of their studies ill prepared for the level of the material encountered. This is due to several factors including the level of mathematics they have on leaving school. A lot of basic material has been covered during earlier years of their training but by the time they reach the third year of their apprenticeship (Phase 6) it is not safe to assume that they have a full grasp of the basics required. I have developed a diagnostic test to measure the level of preparedness of these students. This test covers basic …

An Investigation Of Data Protection And Computer Security In Small Irish Medical Practices, Sean Mcgrath

Dissertations

Small medical practices store and process the health information of their patients in order to aid in providing care to them. Because of this a level of trust exists between the patients and the practice to ensure the sensitive medical data is kept private and secure. There was no formalised way to test if this trust was well deserved and what level of protection was applied to such sensitive health records. A security model that is applicable to small medical practices for the purpose of protecting and securing the personal health information they store was constructed and validated by a …

Towards A Unified Definition Of Supply Chain Management, Edward Sweeney

Articles

A wide range of definitions of supply chain management (SCM) have been developed over the last three decades. The philosophy of SCM is based firmly on a recognition that it is only by working in a more integrated manner that competitive advantage can be maximised. However, for this to become a reality the development of common definitions and understandings between supply chain partners is a critical success factor. The corollary of this is that a lack of definitional consistency and a common understanding is an inhibitor to the successful adoption of SCM thinking in practice. This paper reviews a number …

Upmixing From Mono : A Source Separation Approach, Derry Fitzgerald

Conference papers

We present a system for upmixing mono recordings to stereo through the use of sound source separation techniques. The use of sound source separation has the advantage of allowing sources to be placed at distinct points in the stereo field, resulting in more natural sounding upmixes. The system separates an input signal into a number of sources, which can then be imported into a digital audio workstation for upmixing to stereo. Considerations to be taken into account when upmixing are discussed, and a brief overview of the various sound source separation techniques used in the system are given. The effectiveness …

Bs News July/August

Building Services Engineering

No abstract provided.

A Simple Ultrasensitive Displacement Sensor Based On A High Bend Loss Single-Mode Fibre And A Ratiometric Measurement System, Pengfei Wang, Gilberto Brambilla, Yuliya Semenova, Qiang Wu, Gerald Farrell

Articles

An all-fibre displacement sensor with a simple configuration and capable of monitoring sub-50 nm displacements is proposed and investigated experimentally. The proposed fibre displacement sensor consists of a half-loop structure of bare high bend loss single-mode fibre 1060XP and a ratiometric power interrogation system. By measuring the change in transmission ratio in the ratiometric system, a change in displacement can be measured. The displacement sensor is sensitive to temperature and an experimental investigation of this sensitivity is presented. It is found that the peak shift response has a linear variation with temperature; therefore, temperature dependence can be mitigated by a …

Comparing Fbg And Pcf Force Sensors In A Laparoscopic Smart Surgical Scissor Instrument, Dean Callaghan, Ginu Rajan, Mark Mcgrath, Eugene Coyle, Yuliya Semenova, Gerald Farrell

Conference Papers

This paper presents a sensorized laparoscopic surgical scissor instrument using both a fiber Bragg grating (FBG) and a tapered photonic crystal fiber (PCF) as force sensors. The sensors are located on the blades for the detection of interaction forces generated between the instrument and tissue during cutting. The force sensitivity of each sensorized blade is examined. Results show that the scissor blade-PCF sensor arrangement outperforms the blade with the FBG during static loading calibration experimentation. Moreover, experiments show that the PCF based arrangement is less sensitive to temperature effects than its FBG counterpart. This negates the need for additional temperature …

Performance Analysis And Assessment Of A Tf-Idf Based Archetype-Snomed-Ct Binding Algorithm, Sheng Yu, Jesus Bisbal, Damon Berry

Conference Papers

Term bindings in archetypes are at a boundary between health information models and health terminology for dual model-based electronic health-care record (EHR) systems. The development of archetypes and the population of archetypes with bound terms is in its infancy. Terminological binding is currently performed “manually” by the teams who create archetypes. This process could be made more efficient, if it was supported by automatic tools. This paper presents a method for evaluating the performance of automatic code search approaches. In order to assess the quality of the automatic search, the authors extracted all the unique bound codes from 1133 archetypes …

An Investigation Of The Perception Of Gains From Undergraduate International Exchange Programs: The Tale Of Atlantis, Donal Mchale, Gul Okudan Kremer, Michael Dyrenfurth, Brian Bowe

Conference Papers

In this paper, we provide the quantitative results collected through a two-column survey instrument with which students recorded their perceptions of their educational experiences, and then summarize the qualitative study findings to outline the benefits of being immersed in different educational settings through study abroad experiences. Given the current resource constraint environment in higher education settings, we hope to help our community in making better decisions relevant to developing and sustaining study abroad programs

Surgical Cutting And Ablation By Energy Based Devices: Principles And Applications, Garrett Mcguinness, Joseph A. Mcgeough, Graham Gavin, Brendan O'Daly

Conference Papers

Advances in ultrasound, radiofrequency, and water jet systems are facilitating their increased use in new medical ablation or cutting applications in fields as diverse as cardiology, orthopaedics, ophthalmology, dermatology, oncology and neurosurgery. These methods involve controlled alteration or destruction of tissues via the application of thermal, electrical or kinetic energy. This market segment is characterised by advanced devices capable of heating or cooling tissue from -200°C to 400°C, or inducing vibrations of up to 60 kHz to cause tissue damage. The medical conditions targeted primarily pertain to chronic and age-related diseases, but elective and cosmetic procedures are also addressed. Medical …

Measuring Design Metrics In Websites, Emilio Navarro, Ronan Fitzpatrick

Conference papers

The current state of the World Wide Web demands website designs that engage consumers in order to allow them to consume services or generate leads to maximize revenue. This paper describes a software quality factor to measure the success of websites by analyzing web design structure and not relying only on websites traffic data. It is also documents the requirements and architecture to build a software tool that measures criteria for determining Engagibility. A new set of social criteria to be measured for current website philosophy is also proposed.

Process Refinement Through Design Of Experiments (Taguchi) To Reduce Porosity Levels Of Thin Flame Spray Nicrbsi Coatings On Cast Aluminium Alloys, David Culliton, David Kennedy, Tony Betts

Conference Papers

Thin(16matrix of key deposition parameters was constructed to develop the optimum spray parameters. The effects of parameter variations on the porosity levels of these coatings were assessed. Key parameter interactions were reported. Quantifiable interactions between the selected parameters were noted for the LM24 substrate. However, on the LM25 substrate these interactions were much less defined. Corrosion performance of the optimised coatings, based on electrochemical impedance spectroscopy, was reported. The presence of through-pores in the coatings were shown to reduce the corrosion resistance of the coated systems by a factor of 10, in dilute NaCl solutions, compared to bulk 316L stainless …

A Rheological Model Of The Dynamic Behaviour Of Magnetorheological Elastomers, Lin Chen, Stephen Jerrams

Articles

A rheological model is described that was developed to simulate the dynamic behaviour of magnetorheological elastomers (MREs). The viscoelasticity of the polymer composite, magnetic field induced properties and interfacial slippage between the matrix and particles were modelled by analogy with a standard linear solid model, a stiffness variable spring and a spring-Coulomb friction slider respectively. The loading history and rate dependent constitutive relationships for MREs were derived from the rheological model. The hysteresis loop from shear strain - shear stress plots, which determines the shear modulus and loss factor, were obtained from substituting cyclic loading into these constitutive relationships. The …

Qualitative Research In Engineering Education, Kevin Kelly, Brian Bowe

Conference papers

No abstract provided.

Characterisation, Modelling And Simulation Of Flexible Polyurethane Foam, Conor Briody, Barry Duignan, Stephen Jerrams

Conference Papers

Flexible polyurethane foam is an open-celled polymeric material that exhibits strain rate and temperature effects. It has found various applications in areas including the packaging, medical, sports, aerospace and aeronautical industries. Polyurethane foam is ubiquitous in seating applications and finds particular use in specialised wheelchair seating where customised seating solutions are required which can provide proper comfort and support without the risk of developing pressure ulcers. Proper seating design is critical for users if this problem is to be avoided, but a lack of quantitative knowledge of this material’s behaviour has limited its effectiveness. The objectives of the work presented …

A Review Of Zero Discharge Wastewater Treatment Systems Using Reed Willow Bed Combinations In Ireland, Sean O'Hogain, Liam Mccarton, Anna Reid, John Turner

Articles

The concept of a reed willow bed combination has the potential to achieve a zero discharge wastewater treatment system. This paper will present results from a two year study to monitor the performance of a reed willow bed facility at Lynches Lane, Co. Dublin, Ireland. Outline design specifications for the facility will be presented. Monitoring results for a two year period including influent and effluent parameters, rainfall, potential evapotranspiration, and soil classification will be presented and discussed. During the two year monitoring period the system achieved a zero discharge. This paper will discuss the potential widespread application of similar systems …

Validated Trnsys Model For Forced Circulation Solar Water Heating Systems With Flat Plate And Heat Pipe Evacuated Tube Collectors, Lacour Ayompe, Aidan Duffy, Sarah Mccormack, Michael Conlon

Articles

This paper presents a validated TRNSYS model for forced circulation solar water heating systems used in temperate climates. The systems consist of two flat plate collectors (FPC) and a heat pipe evacuated tube collector (ETC) as well as identical auxiliary components. The systems were fitted with an automated unit that controlled the immersion heaters and hot water demand profile to mimic hot water usage in a typical European domestic dwelling. The main component of the TRNSYS model was the Type 73 FPC or Type 538 ETC. A comparison of modelled and measured data resulted in percentage mean absolute errors for …

Shifted Nmf Using An Efficient Constant-Q Transform For Monaural Sound Source Separation, Rajesh Jaiswal, Derry Fitzgerald, Eugene Coyle, Scott Rickard

Conference papers

Non-negative Matrix Factorisation (NMF) based algorithms have found application in monaural audio source separation due to their ability to factorize audio spectrogram into additive part-based basis functions, which typically corresponds to individual notes or chords in music. These separated basis functions are usually greater in number than the active sources, hence clustering is needed for individual source signal synthesis. Although, many attempts have been made to improve the clustering of the basis functions to sources, much research is still required in this area. Recently, Shifted NMF based methods have been proposed as a means to avoid clustering these pitched basis …

User Assisted Source Separation Using Non-Negative Matrix Factorisation, Derry Fitzgerald

Conference papers

Much research has been carried out on the use of non-negative matrix factorisation for the purpose of musical sound source separation. However, a notable shortcoming of non-negative matrix factorisation is that the recovered basis functions have to be clustered to sound sources for separation to take place. This has proved to be a difficult problem to solve. As a means of overcoming this problem, we introduce an extension to non-negative matrix factorisation which allows a user to guide the sepa- ration by singing, or playing along with, the source they want to separate. This is done through the use of …

Printed Circularly-Polarized Antenna With Ultra-Wide Axial-Ratio Bandwidth, Xiulong Bao, Max Ammann

Articles

A circularly polarised printed dipole-like antenna employing asymmetrical arms and an orthogonal slit in the ground plane is presented. It is fed by a stepped microstrip line which connects to the shorter arm. By utilising surface currents on the asymmetrical arms and the orthogonal feedline structure, circular polarisation is realised. Experimental and numerical data are in agreement and the measured results show a fractional impedance bandwidth of 41.3% (1.77–2.69 GHz) and a wide axial-ratio bandwidth of 38.4% (1.81–2.67 GHz).

Review Of The Maxus 8 Sounding Rocket Experiment To Investigate Solidification In A Ti-Al-Nb Alloy, Robin Mooney, David Browne, Olga Budenkova, Yves R. Fautrelle, Ludo Froyen, Andrey Kartavykh, Stephan Rex, Burkhard Schmitz, Daniella Voss, Shaun Mcfadden

Conference Papers

A review of the MAXUS 8 sounding rocket microgravity experiment to investigate solidification structures in a Ti-Al-Nb intermetallic alloy is presented. The experiment was part of the Intermetallic Materials Processing in Relation to Earth and Space Solidification (IMPRESS) EU FP6 project. Key objectives were to investigate columnar and equiaxed solidification, and to achieve Columnar-to-Equiaxed Transition (CET) in the alloy. A microgravity experiment was designed to achieve this using a controlled power-down method. Two alloys were tested: one inoculated with a grain refiner and the other without grain refinement. Unrefined samples displayed axial and radial columnar growth. Boride inoculated samples displayed …

Deployment And Characterisation Of A Telescopic Boom For Sounding Rockets, Johnalan Keegan, Mark Wylie, Stephen Curran, Dinesh Vather, Paul Duffy

Conference Papers

In any sounding rocket, volume and mass are at a premium. Payload designers strive towards smaller, lighter and cheaper mechanisms which can achieve the same goals. This project aims to reduce the mass and volume for probe deployment booms and their deployment mechanisms. An experiment (Telescobe) to test a low cost novel method of boom deployment using telescopic carbon fibre poles was developed. A custom camera measurement system was also developed to measure boom length and harmonic deflection. This experiment was flown onboard the REXUS 9 sounding rocket [1] in February 2011 from Esrange space centre, Sweden. The experiment functioned …

An Evaluation Of The Eeg Alpha-To-Theta And Theta-To-Alpha Band Ratios As Indexes Of Mental Workload, Bujar Raufi, Luca Longo

Articles

Many research works indicate that EEG bands, specifically the alpha and theta bands, have been potentially helpful cognitive load indicators. However, minimal research exists to validate this claim. This study aims to assess and analyze the impact of the alpha-to-theta and the theta-to-alpha band ratios on supporting the creation of models capable of discriminating self-reported perceptions of mental workload. A dataset of raw EEG data was utilized in which 48 subjects performed a resting activity and an induced task demanding exercise in the form of a multitasking SIMKAP test. Band ratios were devised from frontal and parietal electrode clusters. …

Investigation Of Wave Farm Electrical Network Configurations, Fergus Sharkey, Michael Conlon, Kevin Gaughan

Conference papers

Wave Energy Converters (WECs) have been in development for a number of decades and some devices are now close to becoming a commercial reality. As such, pilot projects are being developed, particularly in the UK and Ireland, to deploy WECs on a pre-commercial array scale. There is little experience in the wave energy or utility industry of designing and installing electrical networks for WEC arrays with the closest comparison being offshore wind farms. There are some key features of WECs which will ultimately dictate thatthe electrical configuration differs from that of offshore wind farms.

This paper investigates the potential representative …

Studies Of Shrinkage As A Result Of Holographic Recording In Acrylamide Based Photopolymer Film, Mohesh Moothanchery, Izabela Naydenova, Vincent Toal

Articles

We studied the shrinkage in acrylamide-basedphotopolymer by measuring the Bragg detuning of transmission diffraction gratings recorded at different slant angles and at different intensities. Transmission diffraction gratings of spatial frequency 1000 lines/mm were recorded in an acrylamide-based photopolymer film having 60 ± 5 μm thickness. We have obtained the grating thickness and the final slant angles from the Bragg curve and hence calculated the shrinkage caused by holographic recording. The shrinkage of the material was evaluated for three different recording intensities 1, 5 and 10 mW/cm2, while the total exposure energy was kept constant at 80 mJ/cm2. From the experimental …

A Discussion Of Anti-Islanding Protection Schemes Incorporated In A Inverter Based Dg, Mohamed Moin Hanif, Malabika Basu, Kevin Gaughan

Conference papers

The discussion in this paper is about the local anti-islanding protection techniques that are incorporated in a inverter based DG. The most widely used passive and active techniques along with their suitability to reduce the Non-detection zone (NDZ) are explained here. The most recent work using wavelet transform which actually reduces the NDZ to zero is also introduced in the last section of the paper.

A Parametric Analysis Of Domestic Electricity Consumption Patterns In Ireland, Fintan Mcloughlin, Aidan Duffy, Michael Conlon

Conference Papers

This paper reports findings from a study of electrical load profiles obtained from a survey of a representative cross section of approximately 4,000 Irish dwellings. Electricity demand was recorded at half-hourly intervals for each dwelling over a six month period from 1st July 2009 to 31st December 2009. Descriptive statistics are shown for each electrical parameter such as mean, maximum demand, load factor and time of use (ToU) of electricity consumption. The mean power demand and daily mean load factor of the sample was 0.512kW and 23.43% respectively for all dwellings over the monitoring period. A mean daily maximum demand …

Humidity Sensor Based On A Single-Mode Hetero-Core Fiber Structure, Qiang Wu, Yuliya Semenova, Jinesh Mathew, Pengfei Wang, Gerald Farrell

Articles

Using a small-core single-mode fiber (SCSMF), a novel relative humidity (RH) sensor based on an SMF28-SCSMFSMF28 fiber structure was proposed in this paper. By depositing a humidity sensitive material, such as poly (ethylene oxide) (PEO) on the bare SCSMF fiber, the proposed structure can act as an RH sensor with high sensitivity. Experiments demonstrated that the proposed RH sensor with PEO coating can achieve a sensitivity of 430nm per relative humidity unit (RHU) in the RH range from 80% to 83% RH and a sensitivity of 50nm per RHU in the RH range from 83% to 95% RH.

Analyse Du Comportement Réel Et De L'Optimisation Structurelle Des Cycles De Turbines À Gaz, Alexandru Dobrovicescu, Michel Feidt, Lavinia Grosu, Jim Mcgovern, Georgiana Tirca-Dragomirescu

Conference Papers

L’article présente une étude comparative, basée sur l’analyse exégétique, de l’effet de non prise en considération du comportement réel de l’agent thermique et de l’utilisation des modèles simplifiés pour calculer les performances des cycles de turbines à gaz avec et sans récupération de chaleur. Un intérêt spécial a été réservé au processus de combustion et au transfert de chaleur dans le préchauffeur d’air. La variation des destructions et des pertes d’exergie par rapport à la variation des paramètres fonctionnels est présentée.