Engineering Commons^™

Time-Valued-Technology: A Light-Emitting Diode Case Study For Determining Replacement Strategy For High Technology Infrastructure Items, Kevin S. Ochs

Theses and Dissertations

Infrastructure projects have typically involved long-term investments in relatively mature technologies characterized by stable performance and cost. However, with the ever-increasing rate of technological innovation, an increasing number of potential infrastructure investments involve a decision to replace a traditional technology with a rapidly evolving technology. In such circumstances, it is possible to reap significant performance or cost advantages through near-term replacement. However, this rapid adoption strategy has the potential to incur an opportunity cost due to increased performance or cost advantages the technology would provide if replacement was delayed. This research develops a cost analysis method, referred to as time-valued-technology, …

Using Vft As A Constraint For Goal Programming Models: A Case Study For Turkish Air Force Flying Hour Program, Ahmet Bengoz

Theses and Dissertations

In its 60-year history, there have been many published documents in the literature about goal programming (GP), but contributions to the literature are still needed. This research intends to add to the literature on goal-programming models by discussing one of the key assumptions of GP regarding linearity, and by discussing some of the issues regarding incommensurability (difference in data types) and weighting. GP requires an interaction between the decision maker (DM) and the analyst to ensure that the model reflects the DM's preferences. However, it may be difficult for them to interact if the mathematical model is very large and …

Acuta Enews March 2012 Vol. 41, No. 3

ACUTA Newsletters

In this issue...

1 Meet the 2012-13 Board of Directors

2 Looking Back at a Look Ahead

3 New Benefit: Members in Transition

3 Upcoming Events

4 Members Celebrate Anniversaries

5 Committee Corner

6 Workflow Costing Methodology

7 ReNet trends Worth Watching

8 Committees Seeking Volunteers

8 Virtual Collaboration

9 Member Benefit of the Month: ACUTA journal

9 Streaming Video: IP & 21st C Skills

10 lnfo Links

10 Welcome New Members

11 Check It Out

Effect Of Gold Content On The Microstructural Evolution Of Sac305 Solder Joints Under Isothermal Aging, Mike Powers, Jianbiao Pan, Julie Silk, Patrick Hyland

Industrial and Manufacturing Engineering

Au over Ni on Cu is a widely used printed circuit board (PCB) surface finish, under bump metallization (UBM), and component lead metallization. It is generally accepted that less than 3 wt.% Au in Sn-Pb solder joints inhibits formation of detrimental intermetallic compounds (IMC). However, the critical limit for Au content in Pb-free solder joints is not well established. Three surface-mount package platforms, one with a matte Sn surface finish and the others with Ni/Au finish, were soldered to Ni/Au-finished PCB using Sn-3.0Ag- 0.5Cu (SAC305) solder, in a realistic manufacturing setting. The assembled boards were divided into three groups: one …

System For Detection Of Malicious Wireless Device Patterns, Shikhar P. Acharya, R. Arora, Ivan G. Guardiola

Engineering Management and Systems Engineering Faculty Research & Creative Works

The research within presents the use of Hidden Markov Models (HMM) for the detection of wireless devices in highly noisy environments using their unintended electromagnetic emissions (UEE). All electromagnetic devices emit such radiation that is unique to the electronics, housing, and other device attributes. This pattern recognition system can provide continuous detection analysis and can provide ideal information regarding the distance to an unknown device. An experiment was performed where UEE of a device was detected by a spectrum analyzer. Experimental result shows that our model can accurately detect if there is a device nearby emitting UEE or not.

Assessing Aviation E-Marketplaces: A Mmulti-Criteria Approach., Emilio Esposito, Pietro Evangelista, Michele Mastroianni, Renato Passaro, Edward Sweeney, Claudia-Maria Wagner

Books/Book chapters

After a proliferation of logistics e-Marketplaces during the dot.com boom of 1998-2000, there has been a high rate of failure and survivals are developing much more slowly than expected. This is the case in the aviation industry where a large number of B2B e-Marketplaces emerged according to the focus of aviation companies’ strategies on electronic B2B in the late 1990s. However, the current use of e-Marketplaces in the industry is low and many of them have ceased trading. The traditional e-Marketplaces model has been characterised by poor quality portals and a lack of technical standards. Such an approach is unsustainable …

Hierarchical Fuzzy Logic System For Implementing Maintenance Schedules Of Offshore Power Systems, C. S. Chang, Zhaoxia Wang, Fan Yang, W. W. Tan

Research Collection School Of Computing and Information Systems

Smart grid provides the technology for modernizing electricity delivery systems by using distributed and computer-based remote sensing, control and automation, and two-way communications. Potential benefits of the technology are that the smart grid's central control will now be able to control and operate many remote power plant, optimize the overall asset utilization and operational efficiently. In this paper, we propose an innovative approach for the smart grid to handle uncertainties arising from condition monitoring and maintenance of power plant. The approach uses an adaptive maintenance advisor and a system-maintenance optimizer for designing/implementing optimized condition-based maintenance activities, and collectively handles operational …

The Morphology Evolution And Voiding Of Solder Joints On Qfn Central Pads With A Ni/Au Finish, Julie Silk, Jianbiao Pan, Mike Powers

Industrial and Manufacturing Engineering

In this paper, we report on a comprehensive study regarding the morphology evolution and voiding of SnAgCu solder joints on the central pad of two different packages – QFN and an Agilent package called TOPS – on PCBs with a Ni/Au surface finish. Samples were isothermally aged at the equivalent of 0, 2, 7 and 14 years service life. Representative solder joints were cross-sectioned and analyzed using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) in order to investigate the evolution of the solder joint morphology as a function of Au content and isothermal aging. IMC thickness was …

New Window On Optical Brain Imaging; Medical Development, Simulations And Applications, Chemseddine Mansouri, Nasser H. Kashou

Biomedical, Industrial & Human Factors Engineering Faculty Publications

In this chapter we hope to give a technological review of near-infrared light and systems, discuss optode design considerations including background on the fiber design as it relates to this field and finally touch on current trends and applications. For the latter, we will focus on diffusion theory and simulation of photon propagation using a head model. We will follow this with concluding remarks.

Modeling Small Unmanned Aerial System Mishaps Using Logistics Regression And Artificial Neural Networks, Sean E. Wolf

Theses and Dissertations

A dataset of 854 small unmanned aerial system (SUAS) flight experiments from 2005-2009 is analyzed to determine significant factors that contribute to mishaps. The data from 29 airframes of different designs and technology readiness levels were aggregated. 20 measured parameters from each flight experiment are investigated, including wind speed, pilot experience, number of prior flights, pilot currency, etc. Outcomes of failures (loss of flight data) and damage (injury to airframe) are classified by logistic regression modeling and artificial neural network analysis. From the analysis, it can be concluded that SUAS damage is a random event that cannot be predicted with …

Dynamic Analysis Of A Lean Cell Under Uncertainty, Ahmed M. Deif

Industrial Technology and Packaging

One of the ultimate targets of lean manufacturing paradigm is to balance production and produce at takt time in production cells. This paper investigates the performance of a lean cell that implements the previous lean goals under uncertainty. The investigation is based on a system dynamics approach to model a dynamic lean cell. Backlog is used as a performance metric that reflects the cell’s responsiveness. The cell performance is compared under certain and uncertain external (demand) and internal (machine availability) conditions. Results showed that although lean cell is expected to be responsive to external demand with minimum waste, however, this …

A Survey Based Analysis Of It Adoption And 3pls’ Performance, Pietro Evangelista, Riccardo Mogre, Alessandro Perego, Antonino Raspagliesi, Edward Sweeney

Articles

Purpose – In today’s competitive scenario, effective supply chain management is increasingly dependant on third party logistics (3PL) companies’ capabilities and performance. The dissemination of information technology (IT) has contributed to change the supply chain role of 3PL companies and IT is considered an important element influencing performance of modern logistics companies. Therefore, the purpose of this paper is to explore the relationship between IT and 3PLs’ performance, assuming that logistics capabilities play a mediating role in this relationship.

Design/methodology/approach – Empirical evidence based on a questionnaire survey conducted on a sample of logistics service companies operating in the Italian …

Acuta Enews February 2012 Vol. 41, No. 2

ACUTA Newsletters

In this issue...

1 Seminar in Review & What's New

3 jeri Semer Volunteer Recognition Award j Upcoming Events

4 Single- vs. Multi-Vendor Approaches to UC

5 Harness Mobile Technology's Potential

6 lnfo Links

7 Board Report

7 Committee Corner

8 Member Benefit of the Month: Membership Directory

8 Thanks to Exhibitors & Sponsors welcome New Members

9 Check It Out

Pico-Satellite Integrated System Level Test Program, Marcus A. Ruddy

Master's Theses

Testing is an integral part of a satellite’s development, requirements verification and risk mitigation efforts. A robust test program serves to verify construction, integration and assembly workmanship, ensures component, subsystem and system level functionality and reduces risk of mission or capability loss on orbit.

The objective of this thesis was to develop a detailed test program for pico-satellites with a focus on the Cal Poly CubeSat architecture. The test program established a testing baseline from which other programs or users could tailor to meet their needs. Inclusive of the test program was a detailed decomposition of discrete and derived test …

A Study Of Queuing Theory In Low To High Rework Environments With Process Availability, Adam J. Brown

Theses and Dissertations--Manufacturing Systems Engineering

In manufacturing systems subject to machine and operator resource constraints the effects of rework can be profound. High levels of rework burden the resources unnecessarily and as the utilization of these resources increases the expected queuing time of work in process increases exponentially. Queuing models can help managers to understand and control the effects of rework, but often this tool is overlooked in part because of concerns over accuracy in complex environments and/or the need for limiting assumptions. One aim of this work is to increase understanding of system variables on the accuracy of simple queuing models. A queuing model …

A Software Application For The Selection Of Temperature Measuring Sensors Using The Analytic Hierarchy Process (Ahp), Tarek Al-Hawari, Shadi Mohammad Al-B'Ool, Amer Momani

Systems Science and Industrial Engineering Student Scholarship

This study presents a software application that applies the Analytic Hierarchy Process (AHP) to objectively select the best temperature sensors. Three industrial applications and seven sensor alternatives are considered. The developed application performs the selection process in a computerised, easy–to–use graphical user interface. The underlying decision method ranks temperature sensors with scores resulting from the synthesis of relative preferences of each alternative at different levels considering independent evaluation criteria. Pair–wise relative comparison matrices collected from experts are embedded and are retrieved according to user specifications. A case study is conducted which involves selecting the best sensor for an automotive catalytic …

Learning From Failure In Systems Engineering: A Panel Discussion, Nathan Slegers, Ronald T. Kadish, Gary E. Payton, John Thomas, Michael D. Griffin, Dan Dumbacher

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

This paper summarizes the discussion of the Learning from Failure in Systems Engineering panel that was held in Huntsville, AL on November 8, 2010. The panel objective was to discuss how systems engineers respond to and learn from failure and identify future directions important to the community. The panel consisted of four representatives with experience in government, industry, and academia: (1) Ronald Kadish from Booz Allen Hamilton and former director of the Missile Defense Agency, (2) Gary Payton, retired Deputy Under Secretary of the Air Force for Space Programs, (3) John Thomas from Booz Allen Hamilton and President-elect of INCOSE, …

New Tabu Search Heuristics For The Dynamic Facility Layout Problem, Alan Mckendall, Wen-Hsing Liu

Faculty & Staff Scholarship

A manufacturing facility is a dynamic system that constantly evolves due to changes such as changes in product demands, product designs, or replacement of production equipment. As a result, the dynamic facility layout problem (DFLP) considers these changes and is defined as the problem of assigning departments to locations during a multi-period planning horizon such that the sum of the material handling and re-arrangement costs is minimised. In this paper, three tabu search (TS) heuristics are presented for this problem. The first heuristic is a simple TS heuristic. The second heuristic adds diversification and intensification strategies to the first, and …

Application Of Reference Models In Technology Management, Farshad Madani

Engineering and Technology Management Student Projects

Reference models, sometimes called with other different words, prepare a general model from a specific view of the related environment. Reference models are considered as a basic foundation to create: 1) a common language among specialists 2) a reference for the entities such as processes 3) relationships among entities 4) tools and decision making procedures for the real world.

In this report, it's tried the definitions of reference model in the selected papers have been reviewed. It's noticeable that in many papers the term of framework is used instead of reference model. Also, applications of reference models are reviewed and …

Network-Based Data Collection For A Project-Based Freshman Class, Samuel Bogan Daniels, Cheryl Q. Li, David Harding

Mechanical and Industrial Engineering Faculty Publications

The hands-on experience for engineering students is often lacking with class sizes increasing and classroom resources under constant pressure. Even with smaller class sizes and studio classrooms there is only so much equipment and technical support to run experiments and allow for student interaction. Network-based data collection and control may alleviate some of these issues and allow for more hands-on experiences, although remote, in the classroom. This paper discusses the interesting problems and not so obvious pitfalls of setting up some simple network-based data acquisition systems for a multidisciplinary freshman level engineering course. The course as currently taught includes some …

Trust Development In Swift Starting Action Teams: A Multilevel Framework, Jessica Wildman, Marissa Shuffler, Elizabeth Lazzara, Stephen Fiore, C. Shawn Burke, Eduardo Salas, Sena Garven

United States Army: Publications

Swift starting action teams (STATs) are increasingly prevalent in organizations, and the development of trust is often a critical issue for their effectiveness. However, current theory and research do not provide a clear picture regarding how trust toward the team (i.e., the team as the target) is developed in these settings. The primary contribution of this article is to present a theoretical framework describing how individual-level trust toward one’s team is developed in STAT contexts. This article integrates several existing trust theories into one comprehensive context-specific multilevel theory of how trust develops in STATs from cognitive, affective, behavioral, and contextual …

Throughput Analysis And Bottleneck Management Of Production Lines, Hatice Ucar

Wayne State University Dissertations

Companies are increasing their manufacturing excellence in order to stay competitive in the globalizing market. Plants are becoming more complex year by year due to increasing product classes, hardware complexity, etc... The design and operation of manufacturing systems is of greater importance today than it was in the past. Many studies have been carried out on the design and operation of manufacturing systems by academicians and practitioners over the years, however, there is still no agreement on how to best predict and improve the factory performance (Gershwin, 2000). The studies are based on either analytical approaches or simulation-based approaches. Success …

Sampling Based Progressive Hedging Algorithms For Stochastic Programming Problems, Nezir Aydin

Wayne State University Dissertations

Many real-world optimization problems have parameter uncertainty. For instances where the uncertainties can be estimated to a certain degree, stochastic programming (SP) methodologies are used to identify robust plans. Despite advances in SP, it is still a challenge to solve real world stochastic programming problems, in part due to the exponentially increasing number of scenarios. For two-stage and multi-stage problems, the number of scenarios increases exponentially with the number of uncertain parameters, and for multi-stage problems also with the number of decision stages.

In the case of large scale mixed integer stochastic problem instances, there are usually two common approaches: …

Factors Impacting Technology Transfer: The Maquiladora Industry In Yucatan, Mexico, Ana Maria Canto, Carlos Blanco, Pilar Pazos

Engineering Management & Systems Engineering Faculty Publications

Technology transfer and knowledge transfer are the building blocks for innovation, efficiency and increased competitiveness. The topic of technology transfer in the context of multinational companies has been the focus of technology management researchers for well over two decades. Developing countries housing twin plans have been exposed to technology transfer from very diverse countries with different approaches to the technology transfer process and different levels of success. This cultural and national diversity adds an additional level of complexity to the technology transfer domain that has been largely unexplored. This paper will explore critical factors that had an impact in successful …

The Impact Of Online Collaboration Spaces On Virtual Team Outcomes, Anil Ustun, Pilar Pazos

Engineering Management & Systems Engineering Faculty Publications

With the emergence of information technology, organizational teams often work virtually, relying on different technologies to successfully complete tasks. This paper investigates the influence of online collaboration spaces on team performance and team affective outcomes such as satisfaction with the process. An experiment will be conducted in which teams of 3 participants will work together on a survival decision-making activity (Lost at Sea). Teams will be collaborating in a web-conferencing (Adobe Connecta™) space and a 3D (three-dimensional) virtual space (Second Life). Based on Social Presence Theory, we expect that the avatar-based 3D environment will provide a richer environment for social …

A Framework For Personalized Dynamic Cross-Selling In E-Commerce Retailing, Arun K. Timalsina

Wayne State University Dissertations

Cross-selling and product bundling are prevalent strategies in the retail sector. Instead of static bundling offers, i.e. giving the same offer to everyone, personalized dynamic cross-selling generates targeted bundle offers and can help maximize revenues and profits. In resolving the two basic problems of dynamic cross-selling, which involves selecting the right complementary products and optimizing the discount, the issue of computational complexity becomes central as the customer base and length of the product list grows. Traditional recommender systems are built upon simple collaborative filtering techniques, which exploit the informational cues gained from users in the form of product ratings and …

Rfid-Based Business Process And Workflow Management In Healthcare:Design And Implementation, Xiaoyu Ma

Wayne State University Dissertations

The healthcare system in the United States is considered one of the most complex systems and has encountered challenges related to patient safety concerns, escalating costs, and unpredictable outcomes. Many of these problems share a common cause - a lack of efficient business process management and visibility into the real-time location, status, and condition of medical resources. The goal of this research is to propose a newly integrated system to model, automate, and monitor healthcare business processes using an automatic data collection technology to record the timing and location of activities and identify their various resources.

This dissertation makes several …

Understanding System Of Systems Development Using An Agent-Based Wave Model, Paulette Acheson, Louis Pape, Cihan H. Dagli, Nil Kilicay-Ergin, John Columbi, Khaled Haris

Engineering Management and Systems Engineering Faculty Research & Creative Works

System of Systems (SoS) development is a complex process that depends on the cooperation of various independent Systems [1]. SoS acquisition and development differs from that typical for a single System; it has been shown to follow a wave paradigm known as the Wave Model [2]. Agent based models (ABMs) consist of a set of abstracted entities referred to as agents, and a framework using simplified rules for simulating agent decisions and interactions. Agents have their own goals and are capable of perceiving changes in the environment. Systemic (global) behavior emerges from the decisions and interactions of the agents. This …

Using An Ahp/Anp Hybrid Methodology For Freight Transport Networks Selection Towards Sustainable Transportation, Andrea M. Graham

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

The selection of an effective transportation network for the transport of container freight is one of the most important factors in supply chain and logistics planning. The current transport networks, hub-and-spoke and point-to-point, although optimal in many aspects are still plagued with issues in route optimization, empty travel, and bad intermodal synchronization. The trucking industry, the most utilized of all modes, offers unsustainable components in its current state that continually introduce negative impacts to an ever evolving supply chain network. This research investigates a third potentially more sustainable distributed multi-segment transportation network. This network will be compared to the traditional …

Constraint Optimal Selection Techniques (Costs) For Linear Programming, Goh Saito

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Simplex pivoting algorithms remain the dominant approach to solve linear programming (LP) because they have advantages over interior-point methods. However, current simplex algorithms are often inadequate for solving a large-scale LPs because of their insufficient computational speeds. This dissertation develops the significantly faster simplex-based, active-set approaches called Constraint Optimal Selection Techniques (COSTs). COSTs specify a constraint-ordering rule based on constraints' likelihood of being binding at optimality, as well as a rule for adding constraints. In particular, new techniques for adding multiple constraints in an active-set framework, and an efficient constraint-ordering rule for LP are proposed. These innovations greatly reduce computation …