Engineering Commons^™

Adaptive Dynamic Programming For High-Dimensional, Multicollinear State Spaces, Bancha Ariyajunya

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Dynamic programming (DP) is a mathematical programming method for optimizing a system changing over time and has been used to solve multi-stage optimization problems in manufacturing systems, environmental engineering, and many other fields. Exact solutions are only possible for small problems or under very limiting restrictions, but computationally practical approximate DP methods now exist. Most continuous-state problems require discretization of the state space. A design and analysis of computer experiments (DACE) approach for approximate DP uses experimental design and statistical modeling to approximate the value function in continuous-state problems. However, ideal experimental designs are orthogonal, and when the state variables …

Cnt Reinforced Epoxy Foamed And Electrospun Nano-Fiber Interlayer Systems For Manufacturing Lighter And Stronger Featherweight Composites, Vasileios M. Drakonakis

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Multiple works have been performed in improving carbon fiber reinforced polymer (CFRP) composites especially in terms of strength so delamination, which is the major defect in laminated composites, is prevented. Nevertheless, there is not much focus on improving conventional CFRP systems in terms of weight especially when these are used in primary structures. This work questions whether lighter and at the same time stronger CFRP composites can be manufactured in order to replace conventional CFRP systems in major applications. Under this perspective, this study demonstrates that inducing controlled porosity may offer a systemic approach for manufacturing light weight carbon fiber …

Evaluating Human-Robot Implicit Communication Through Human-Human Implicit Communication, Andrew Xenos Richardson

Electronic Theses and Dissertations

Human-Robot Interaction (HRI) research is examining ways to make human-robot (HR) communication more natural. Incorporating natural communication techniques is expected to make HR communication seamless and more natural for humans. Humans naturally incorporate implicit levels of communication, and including implicit communication in HR communication should provide tremendous benefit. The aim for this work was to evaluate a model for humanrobot implicit communication. Specifically, the primary goal for this research was to determine whether humans can assign meanings to implicit cues received from autonomous robots as they do for identical implicit cues received from humans. An experiment was designed to allow …

Decision Support Models For The External Variety Of Configurable Products, Erkan Isikli

Wayne State University Dissertations

The decision of what configurations of a product to offer is a difficult one for marketing and sales departments. In this study, we developed decision support models that can help decision makers when using operational models to manage external variety of configurable products. Our main objective is to reduce the number of product variants offered in a proper way so that inventory and demand models do not suffer from the curse of dimension. Due to its ability and flexibility, our framework can be employed under various marketing actions. We applied our framework to both qualitative and quantitative data.

Data Mining Based Threshold Development For Novelty Detection, Poovich Phaladiganon

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

The objective of this dissertation is to develop thresholds for novelty detection with applications to statistical process control (SPC). SPC is a widely used technique for improving process and product quality. The primary tool of SPC is a control chart that is used to monitor and detect abnormal processes. Traditional control chart techniques usually require a specific distributional assumption, typically the normal distribution, to establish their control limits. However, in modern manufacturing processes, the normality assumption is often violated. Novelty detection more generally seeks abnormal (or novel) patterns in data, and novelty detection techniques can be applied to control charts …

Multivariate Modeling For A Multiple Stage, Multiple Objective Green Building Framework, Pin Kung

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Green building is a sustainable concept to reduce environmental impact. Decision–making for green building is a complex task. A multi–stage green building framework will guide future development of a comprehensive multiple stage, multiple objective (MSMO) decision–making framework. The software eQUEST is utilized in a design and analysis of computer experiments (DACE) approach to study building options that potentially impact energy usage and cost metrics. The DACE approach uses experimental design and statistical analysis to uncover multivariate patterns that will provide guidance for green building decisions. The computer experiments execute the green building software tools ATHENA [11] and eQUEST [13]. The …

The Art Of Microchannel Molding In Microscope Glass Slides, Sree Bhupathiraju

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

This research is an effort to develop a new process by combining engineering principles with the history of glass art molding to develop clear micro-level test features in glass, for bio-medical and drug experiments dealing with cells, tissue, and micro-level organisms. Most of the present research in the bio-medical field involving micro-level cell and brain tissue testing is done using expensive glass or developed using Polydimethylsiloxane (PDMS) as the main material. Disadvantages of PDMS is that, over time the cell or blood tissue reacts with polymers causing a reduction in clarity making it difficult for a research scientist to observe …

Rq-Tech, A Strategic-Level Approach For Conceptualizing Enterprise Architectures, Christine A. Hoyland

Engineering Management & Systems Engineering Faculty Publications

The purpose of this study is to present a system-theoretic based methodology and corresponding model for Enterprise Architecture development. Enterprise Architecture models can assist managers by illustrating the systemic relationships of their business and the impact their decisions can make. Unfortunately, today's modeling practices are proprietary, time-consuming, and generally ineffective as tools for communicating strategic-level planning across and down all levels of the enterprise. This research explored the most significant factors that must be considered when translating authoritative text and rich pictures of business doctrine into semantic models. An ontology, namely RQ-Tech, was used to parse and tag representative samples …

An Analysis Of Factors Affecting The Effective Use Of Knowledge Management In Counter Improvised Explosive Device (C-Ied) Operations, Umit Gencer, Rafael E. Landaeta, Resit Unal, C. Ariel Pinto, Gokay Sursal

Engineering Management & Systems Engineering Faculty Publications

Improvised Explosive Device (IED) is a weapon of choice and is likely to remain a major component of the Global War on Terrorism. It is critical that gaps in knowledge transfer are quickly addressed in order to more effectively equip personnel to counter IED (C-IED) threat. Therefore, the military must analyze the current Knowledge Management (KM) programs in C-IED arena in order to maximize transfer of knowledge derived from experience and skill to staffs and finally to commanders. This study investigates the factors that influence effective use of KM in C-IED operations in the military. The study suggests that effective …

Effectiveness In Executive Decision-Making Bodies: The Role Of Conflict, Chris L. Day, Pilar Pazos

Engineering Management & Systems Engineering Faculty Publications

The theory and practice related to team processes such as communication, coordination, conflict, and their impact on team performance and effectiveness has been focused on principles applied to teams in general and to specific subsets of teams/situations. Executive decision-making bodies are a specialized subset of teams charged with managing strategic and enterprise-wide change typically consisting of talented team members who make decisions having a broad impact on the organizations they lead. Executive decision-making bodies have been largely unexplored in the team research literature. This study presents an in-depth review of prior research exploring the role of input factors and conflict …

A Case Study Of Key Factors Driving Global Virtual Team Effectiveness, Pilar Pazos, Ana María Canto, Nina C. Magpili

Engineering Management & Systems Engineering Faculty Publications

The purpose of this study is to increase our understanding of the factors contributing to global virtual team effectiveness. We report on a case study on global virtual teams whose members differed in location and nationalities, worked on common collaborative projects, and used media to communicate and coordinate their work. This paper examines the relationships between input factors such as goal commitment, planning and resource availability and team outcomes. Data were collected from 14 teams in an international Master's program in Quality Management, Safety and Environmental Impact hosted in Bolivia and Chile. Students were from nine different countries in South …

Acuta Enews January 2012 Vol. 41, No. 1

ACUTA Newsletters

ln This lssue...

1 Board Approves Slate of Nominees

2 From the President: New Building Network Designs at BC............ .--.Joseph Harrington, Boston College

3 Nominate a Colleague for the ACUTA Ruth A Michalecki Leadership Award

4 Member Benefit of the Month: Monthly Newsletter Subscriptions

4 Today's ACUTA for Today's CIO ................. Keith Fowlkes, UVA Wise

5 ACUTA Webinar: The Challenges of Mobile Connectivity

5 Board Report............... Riny Ledgerwood, SDSU

6 Info Links.............. .....Randy Hayes, Univ. of Northern Iowa

7 How Transdisciplinarity Will Help Workers Thrive ...................James Fraleigh, Apollo Research Institute

8 Committee Corner

8 Thanks to Event Sponsors in 2011 …

The Pricing Of Multiple Exercisable American-Style Real Options, Yu Meng

Doctoral Dissertations

"Real options embedded in a project provide management with the flexibility to alter initial investment decisions, thus making them a practical tool for project planning and budgeting. Additional values are contributed to the underlying project due to the flexibilities that are provided by real options. This dissertation presents two models for pricing multiple exercisable American real options, one that employs the binomial tree method and the other one that employs the finite difference method. Different examples of multiple exercisable real options are discussed to demonstrate the two pricing models. Interactions between options and reality constraints are also considered. These two …

Approximate Policy Iteration For Markov Control Revisited, Abhijit Gosavi

Engineering Management and Systems Engineering Faculty Research & Creative Works

Q-Learning is based on value iteration and remains the most popular choice for solving Markov Decision Problems (MDPs) via reinforcement learning (RL), where the goal is to bypass the transition probabilities of the MDP. Approximate policy iteration (API) is another RL technique, not as widely used as Q-Learning, based on modified policy iteration. in this paper, we present and analyze an API algorithm for discounted reward based on (i) classical temporal differences update for policy evaluation and (ii) simulation-Based mean estimation for policy improvement. Further, we analyze for convergence API algorithms based on Q-factors for (i) discounted reward and (ii) …

Preface To Part Iii: Model Based Systems Engineering, Steven Corns

Engineering Management and Systems Engineering Faculty Research & Creative Works

No abstract provided.

Enabling Systems And The Adaptability Of Complex Systems-Of-Systems, Charles O. Adler, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

For complex techno-social system-of-systems, the system's robustness and its ability to adapt to changing environments and circumstances over the life cycle of the systems is an important measure of system quality and effectiveness. the IEEE 15288-2004 standard describes the concept of "enabling systems" that provide non-operational services to the system-of-interest at various times in the system life cycle. This concept of enabling systems provides critical components and perspective in the architecting and analysis of systems-of-systems adaptability and capabilities over time. Enabling systems also provide a potential strong link between the technical system and larger environmental effects such as economic conditions. …

Computational System Architecture Development Using A Holistic Modeling Approach, Renzhong Wang, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

This paper presents an innovative system architecture development framework that allows the search of optimum architecture solutions within large design space by automating certain model construction, alternative generation, simulation, and assessment tasks. Such framework is facilitated by a holistic modeling approach that combines the capabilities of Object Process Methodology (OPM), Colored Petri Net (CPN) and feature model. the resultant holistic model not only can capture the structural, behavior, and dynamic aspects of a system, allowing strong analysis methods to be applied, but also can specify the architectural design space allowing generation of architecture alternatives that cover it. the proposed framework …

Application Of Model-Based Systems Engineering On A University Satellite Design Team, Dustin Nottage, Steven Corns

Engineering Management and Systems Engineering Faculty Research & Creative Works

System Engineering is a foundation of the Missouri S&T's Satellite Design Team, although it is not explicitly stated at all times. However, implementation of the systems engineering process within a student design team presents unique challenges. Student design teams have a high personnel turnover, a limited time commitment due to classes, some new members have little to no experience, and a sometimes lack of motivation to participate since it is volunteered time. the largest problem on the team is getting the new members knowledgeable about the system so they can start contributing as fast as possible. the other big problem …

Eustressed Or Distressed? Combining Physiology With Observation In User Studies, Avinash Wesley, Peggy Lindner, Ioannis Pavlidis

Engineering Management and Systems Engineering Faculty Research & Creative Works

In this article the authors describe a novel way to conduct user studies via the combination of a physiological and an observational information channel. The method enables not only the quantification of arousing emotional states but also their disambiguation into positive or negative instances. The physiological channel targets sympathetic responses and has materialized as a perspiratory signal extracted from thermal imagery of the perinasal area. The observational channel has materialized via decoding of facial expressions. However, while such decoding is usually performed in the visible spectrum, the authors have developed an algorithm to carry this out in thermal imagery instead. …

Creating A State-Wide Transfer Program For Engineering Technology And Technology Management Studies, Gregory Arbuckle, Mark Doggett

SEAS Faculty Publications

The primary purpose of the Western Kentucky Pipeline for 2+2+2 Engineering Technology and Technology Management (ET/TM) students program is to significantly increase degree production and workforce preparation in central and western Kentucky through the construction of a long-term sustainable, reproducible model bridging program of cooperation between Western Kentucky University (WKU), Murray State University (MSU) and the Kentucky Community and Technical College System (KCTCS). The program will significantly increase industrial and technology education opportunities, technology enrollment and two and four-year degree completion. Additionally, this project supports the Kentucky Council on Postsecondary Education’s (CPE) goal to double the overall number of undergraduate …

Impact Of Rotated Aisles On Travel Distance In Manufacturing Facilities, Dale Masel, Samantha Hedges

12th IMHRC Proceedings (Gardanne, France – 2012)

To design a facility, expected flows between the resources is one of the most important input. Flows are usually calculated given some statistics of previous periods or from the expected demand and the process required. However, in a refurbishing and recycling facility, flows are very fluctuating and not trivial to predict. The quantity produced by such facility not only depends on the demand but also on the supplies which are returned products under guaranty or discarded products after their end-of-use. The uncertainty and the variability on these supplies are often higher than the one on the demand which makes it …

Simulation-Based Performance Improvement Of A Defense Logistics Warehouse, Banu Y. Ekren, Gerald W. Evans, Sunderesh S. Heragu, John S. Usher

12th IMHRC Proceedings (Gardanne, France – 2012)

Warehouses play a critical role in supply chains. They serve as a vital link between manufacturers and customers. In this study, we investigate performance of the largest warehouse (Eastern Distribution Center - EDC) of the Defense Logistics Agency (DLA) located in New Cumberland, PA and propose a near optimum design for the receiving area of the warehouse to improve its performance. First, we develop a simulation model of the system. Second, we interface an optimization model with the simulation in order to optimize the number of people working at the induction stations. In the optimization model, our goal is to …

Optimal Design Of Container Terminal Layout, Debjit Roy, Ren´E De Koster

12th IMHRC Proceedings (Gardanne, France – 2012)

Due to rapid growth in foreign trade using sea vessels, there is a growing focus in improving the infrastructure and operational efficiencies at the container terminals. Particularly, the operational responsiveness of loading and unloading of containers, affects the vessel idle times and profitability of the shipping liners. In this research, we deter- mine optimal stack layout design, which minimizes the container unload times using Automated Guided Vehicles (AGVs). To analyze alternate stack layout designs, we develop integrated queuing network models that capture the stochastic interactions among the container terminal processes (quayside, vehicle transport, and stack side), and provides realistic estimates …

Cycle Time Models For Aisle Changing As/Rs Considering Acceleration/Deceleration, Jörg Oser

12th IMHRC Proceedings (Gardanne, France – 2012)

In multi-aisle AS/RS systems one or more S/R machines serve several aisles with storage racks on both sides of the aisle. An important feature of multi-aisle configurations are aisle changing devices with transfer cars, curve guided aisle switching mechanisms or closed loop rail tracks with curved sections for a two-aisle layout. These systems offer an economic solution, when the number of storage and retrieval transactions is low and storage volume is high. One or several S/R machines each serving a specified number of aisles can be arranged in various layouts to meet the required storage capacity and throughput.

The Order Picking Problem In Fishbone Aisle Warehouses, Melih Celik, Haldun Sural

12th IMHRC Proceedings (Gardanne, France – 2012)

A recent trend in the layout design of unit load warehouses is the application of layouts without conventional parallel pick aisles and straight middle aisles. Two examples for such designs are flying- V and fish bone designs for single and dual command operations. In this study, we consider the same layout types under the case of multiple-item pick lists and show that, for both layout types, the routing problem can be solved in polynomial time. We also propose simple heuristics for this problem inspired by those put forward for parallel-aisle warehouses. Our computational results reveal that under certain cases, fish …

How To Choose An Order-Picking System, Marita Ellinger, Tim Geißen, Detlef Spee

12th IMHRC Proceedings (Gardanne, France – 2012)

Order-Picking-Systems are the parts of material flow systems, which have the largest variance of deployment alternatives. Since a long time there have been many attempts to systematize the way of identification of the order-picking- ystem that the “correct” solution can be found. The previous methods could not be enforced universally. Thus nearly all the material handling system suppliers have their own approach to find the right system, as it turned out at a market analysis of Fraunhofer IML. With the presented concept of finding a solution, a structured, fast method for system identification shall be presented. A stepwise approach to …

Evaluation Of Environmental Benefits Of Che Emerging Technologies By Using Lca, Nenad Zrnić, Andrija Vujičić

12th IMHRC Proceedings (Gardanne, France – 2012)

In the era of climate change combat transport industry is recognized as a sector with one of the largest environmental footprints. A part of transport industry is container shipping and handling division, which is currently growing with the fastest rate. This massive growth of container sector is due to containers pouring from Asia, mainly from China. Thus, container port operations are also experiencing significant increase in port emissions. This fact puts port authorities in position to find a way to reduce environmental impact of port operations and at the same time withhold increase in number containers being handled. In response …

Robust Design Of Public Storage Warehouses, Yeming Yale Gong, Rene De Koster

12th IMHRC Proceedings (Gardanne, France – 2012)

We apply robust optimization and revenue management in public storage warehouses. We optimize the expected revenue of public storage warehouses against the worst cases with a max-min revenue objective, and the decision variables are mainly the number of storage units for each storage type. With the robust design, we can observe worst-case revenue improvement.

Refurburshing And Recycling Facilities Design Methodology, Suzanne Marcotte, Benoit Montreuil

12th IMHRC Proceedings (Gardanne, France – 2012)

To design a facility, expected flows between the resources is one of the most important input. Flows are usually calculated given some statistics of previous periods or from the expected demand and the process required. However, in a refurbishing and recycling facility, flows are very fluctuating and not trivial to predict. The quantity produced by such facility not only depends on the demand but also on the supplies which are returned products under guaranty or discarded products after their end-of-use. The uncertainty and the variability on these supplies are often higher than the one on the demand which makes it …

Functional Design Of Physical Internet Facilities: A Road-Rail Hub, Eric Ballot, Benoit Montreuil, Collin Thivierge

12th IMHRC Proceedings (Gardanne, France – 2012)

As part of the 2010 IMHRC, Montreuil, Meller and Ballot enumerated the type of facilities that would be necessary to operate a Physical Internet (PI, π), which they termed, “π-nodes.” This paper is part of a three-paper series for the 2012 IMHRC where the authors provide functional designs of three PI facilities. This paper covers a PI road-rail hub. The purpose of a PI road-rail node is to enable the transfer of PI containers from their inbound to outbound destinations. Therefore, a road-rail π-hub provides a mechanism to transfer π-containers from a train to another one or a truck or …