Engineering Commons^™

Environmental Analysis Of Codfish Production And Consumption In Portugal, Ayla Frost, Joana Almeida, Joana Dionisio, Radu Godina, Cátia Magro

Journal of Critical Global Issues

Codfish, a typical dish consumed frequently in Portugal, is fished in the cold Northern Atlantic waters far from the Portuguese coast. Thus, regional tensions and the environmental impacts of Portuguese codfish importation and production are significant current issues. The present study uses a life cycle assessment methodology to evaluate the array of environmental impacts of the production of 1 kg of codfish, following a cradle to gate approach. The life cycle inventory was grouped into catch and preprocessing, transit, and curing stages. The data collection of products and processes in each stage was based on scientific peer reviewed documents, technical …

A Multi-Objective Stochastic Programming Model For Resilient And Sustainable Supply Chains Under Uncertainty, Mohammad H. Majdfaghihi

Dissertations

Supply chain resilience (SCRES) and sustainable supply chain management (SSCM) have garnered significant attention in the field of Supply Chain Management (SCM) science. This heightened interest is largely attributable to the increasing frequency and severity of uncertainty and disruptions in global supply chains. Resilience is a beneficial approach to managing uncertainties and preparing for and mitigating the adverse consequences of Supply Chain (SC) disruptions. Sustainability is a key concept in SCM, driven by governmental regulations and heightened stakeholder and customer concerns for environmental and societal well-being. Studies on SCRES have traditionally focused on preparing for and reacting to disruptions and …

Towards Sustainable Additive Manufacturing: Assessment Of Cost, Greenhouse Gas Emission, And Recyclability, Lei Di

Industrial, Manufacturing, and Systems Engineering Dissertations

Additive Manufacturing technologies fabricate 3D objects layer by layer following a predesigned CAD model. Owing to the unique layer-wise production method, additive manufacturing offers competitive advantages in comparison with traditional subtractive manufacturing, such as shortened production time, increased design freedom, improved manufacturing capability and complexity, and reduced manufacturing waste. Numerous research studies have been conducted to design, understand, and improve additive manufacturing technologies in order to facilitate the implementation in the supply chain. On the other hand, with the rapid growth of additive manufacturing, sustainability issues that exist on both process level and supply chain level have started to receive …

Automation Of Life Cycle Assessment, Jacob Hickman

Graduate Theses and Dissertations

An automation program, named Jacob LCA, was created to help perform life cycle assessment (LCA). The program uses a template file to perform controlled and consistently ordered actions with the LCA program, SimaPro, and effectively removes the need for manual user input. It can be set to run using data from one or more life cycle inventory (LCI) files, which allows for rapid iteration and testing of data. It also partially addresses some of the limitations of LCA by establishing a procedure through which temporal and spatial variations in data can be integrated into LCI files and then passed to …

Sustainable Development: A Data Analysis Investigation For A New Conceptual Model, Case Study Comparison And Validation Techniques, Tiffanie Marie Toles

Doctoral Dissertations

"The three pillars model for sustainability, often represented with three intersecting circles described as economic, environmental, and social factors with sustainability being at the center is a complex and philosophically open model [1]. As society promotes efforts to reduce carbon impacts, there becomes a need to critically review the models employed for understanding. This research presents a validated methodology, an updated conceptual configuration of sustainability for overall use, as well as a sustainable development performance measurement system. Using the 2020 Sustainable Development Goals Index Data, 232 indicators from 193 countries were used to evaluate the efficacy of using more than …

The American Multi-Modal Energy System: Model Development With Structural And Behavioral Analysis Using Hetero-Functional Graph Theory, Dakota John Thompson

Dartmouth College Ph.D Dissertations

In the 21st century, infrastructure is playing an ever greater role in our daily lives. Presidential Policy Directive 21 emphasizes that infrastructure is critical to public confidence, the nation's safety, and its well-being. With global climate change demanding a host of changes across at least four critical energy infrastructures: the electric grid, the natural gas system, the oil system, and the coal system, it is imperative to study models of these infrastructures to guide future policies and infrastructure developments. Traditionally these energy systems have been studied independently, usually in their own fields of study. Therefore, infrastructure datasets often lack the …

Part Design Geometry-Driven Toolpath Optimization For Additive Manufacturing Energy Sustainability Improvement, David Kolawole Somade

Graduate Research Theses & Dissertations

One of the most promising new manufacturing technologies in the past three decades isadditive manufacturing (AM), also commonly known as three-dimensional (3D) printing or rapid prototyping. The energy consumption problem in AM can be significant when it is adopted at the industrial scale or used under resource-restricted conditions. The energy consumption of an AM process is influenced by several factors including bed heating, filament extrusion, material infill, component cooling, etc. All these factors are further determined by the equipment and the toolpath for a specific printing task. Build orientation and tool-path direction are frequently used to optimize part and process …

Energy Digital Twins In Smart Manufacturing Systems, Anna Billey

Graduate Theses, Dissertations, and Problem Reports

In this thesis, an Energy Digital Twin for smart manufacturing systems was developed and evaluated. In particular, the study focused on bidirectional parameter communication between the physical and the virtual part with the aim of optimizing the energy used in the manufacturing process. Rising costs and the environmental impacts related to energy consumption have grown in importance worldwide. There are elevated concerns in sectors like manufacturing, leading to an urgent quest to reduce energy consumption. A recent advancement in Industry 4.0 technology, the Digital Twin, represents a promising smart technology and tool that researchers are investigating to help reduce energy …

A Carbon-Aware Planning Framework For Production Scheduling In Mining, Nurual Asyikeen Azhar, Aldy Gunawan, Shih-Fen Cheng, Erwin Leonardi

Research Collection School Of Computing and Information Systems

Managing the flow of excavated materials from a mine pit and the subsequent processing steps is the logistical challenge in mining. Mine planning needs to consider various geometric and resource constraints while maximizing the net present value (NPV) of profits over a long horizon. This mine planning problem has been modelled and solved as a precedence constrained production scheduling problem (PCPSP) using heuristics, due to its NP-hardness. However, the recent push for sustainable and carbon-aware mining practices calls for new planning approaches. In this paper, we propose an efficient temporally decomposed greedy Lagrangian relaxation (TDGLR) approach to maximize profits while …

A Qualitative Look Into Repair Practices, Jumana Labib

Undergraduate Student Research Internships Conference

This research poster is based on a working research paper which moves beyond the traditional scope of repair and examines the Right to Repair movement from a smaller, more personal lens by detailing the 6 categorical impediments as dubbed by Dr. Alissa Centivany (design, law, economic/business strategy, material asymmetry, informational asymmetry, and social impediments) have continuously inhibited repair and affected repair practices, which has consequently had larger implications (environmental, economic, social, etc.) on ourselves, our objects, and our world. The poster builds upon my research from last year (see "The Right to Repair: (Re)building a better future"), this time pulling …

Strategic Energy Master Planning For Carbon Neutrality, Marie Patterson

CSU Journal of Sustainability and Climate Change

Universities across the United States are generating goals to be more sustainable and carbon neutral. The energy used in existing buildings on campuses amount to a large volume of greenhouse emissions and must be reduced to help achieve neutrality goals. Strategic Energy Master Plans are instrumental to support these goals through the development of recommendations to reduce energy. Calculating the energy use intensity for existing buildings, a main component of a Strategic Energy Master Plan, can help the campus understand where energy is being used the most. With this information the highest energy consuming buildings can be the focus of …

Combining Green Metrics And Digital Twins For Sustainability Planning And Governance Of Smart Buildings And Cities, Casey R. Corrado, Suzanne M. Delong, Emily G. Holt, Edward Y. Hua, Andreas Tolk

VMASC Publications

Creating a more sustainable world will require a coordinated effort to address the rise of social, economic, and environmental concerns resulting from the continuous growth of cities. Supporting planners with tools to address them is pivotal, and sustainability is one of the main objectives. Modeling and simulation augmenting digital twins can play an important role to implement these tools. Although various green best practices have been utilized over time and there are related attempts at measuring green success, works in the published literature tend to focus on addressing a single problem (e.g., energy efficiency), and a comprehensive approach that takes …

Improving Logistics Efficiency Through Collaborative Truck Routing, Patrick Dougherty

Industrial Engineering Undergraduate Honors Theses

The logistics industry is among the world’s largest and most essential. Specifically, trucking is a massive component of the modern logistics system. In 2012, truck transportation carried 68% of all freight tonnage in the U.S. However, trucking currently faces significant problems with efficiency and sustainability. Of all miles driven by trucks yearly in the U.S., 25% are driven with empty loads and 36% are driven with underutilized loads. In addition to this economic inefficiency, the industry faces social and environmental challenges. Driver turnover rates are near 100%, and trucking accounts for a significant level of greenhouse gas emissions. One potential …

Optimizing Cost And Performance Of Infrastrucure Alternatives At Contingency Bases In A Hub-And-Spoke Network, Kyle J. Rodriguez

Theses and Dissertations

Military contingency bases require substantial resources and funding sustain and are often not connected to an infrastructure grid. Infrastructure assets produce the required outputs for sustainment, but are often expensive and inefficient, producing a significant logistical burden. With the increasing near-peer threats of opposing military forces, there is a need for more self-sufficient contingency bases with alternatives that reduce resources usage and the cost of sustainment. Accordingly, the goal of this research is to develop an optimization model capable of selecting infrastructure alternative combinations that minimize the overall resource usage and cost of sustainment at the contingency base level.

Infrastructure Systems Modeling Using Data Visualization And Trend Extraction, Jacob Marshal Hale

Doctoral Dissertations

“Current infrastructure systems modeling literature lacks frameworks that integrate data visualization and trend extraction needed for complex systems decision making and planning. Critical infrastructures such as transportation and energy systems contain interdependencies that cannot be properly characterized without considering data visualization and trend extraction.

This dissertation presents two case analyses to showcase the effectiveness and improvements that can be made using these techniques. Case one examines flood management and mitigation of disruption impacts using geospatial characteristics as part of data visualization. Case two incorporates trend analysis and sustainability assessment into energy portfolio transitions.

Four distinct contributions are made in this …

A Time Series Sustainability Assessment Of A Partial Energy Portfolio Transition, Jacob Hale, Suzanna Long

Engineering Management and Systems Engineering Faculty Research & Creative Works

Energy portfolios are overwhelmingly dependent on fossil fuel resources that perpetuate the consequences associated with climate change. Therefore, it is imperative to transition to more renewable alternatives to limit further harm to the environment. This study presents a univariate time series prediction model that evaluates sustainability outcomes of partial energy transitions. Future electricity generation at the state-level is predicted using exponential smoothing and autoregressive integrated moving average (ARIMA). The best prediction results are then used as an input for a sustainability assessment of a proposed transition by calculating carbon, water, land, and cost footprints. Missouri, USA was selected as a …

Resilient Design And Crisis Management, Rich Ham

Operations Management Presentations

Explores the techniques to design resilience into systems, business functions, compliance, quality assurance and response to uncertainty. Includes an overview of Federal Emergency Management Agency principles in resilient design and crisis management, including implementation of National Incident Management System processes and industry standards to frame resilient design, procedures and planning documents. Learn to focus on the use of testing, exercises, and implementation of Plan, Do, Check, Act model to continually improve government, business and personal continuity through periods of cascading uncertainty.

Robust And Sustainable Energy Pathways To Reach Mexico’S Climate Goals, Rodrigo Mercado Fernandez

Doctoral Dissertations

As countries set climate change goals for adaptation and mitigation efforts, there are many questions regarding to how to reach these targets. These efforts will necessitate the transition of our electricity infrastructure from relying on conventional electricity generation technologies including natural gas, coal and oil, to clean energy generation with renewables. Through the three essays presented in this dissertation, we explore various pathways of development for the electricity system to reach long term climate change goals. We are interested in identifying: Is there a unique optimal development option or are there various? How do different mixes of electricity generation technologies …

A Comprehensive And Absolute Corporate Sustainability Assessment And Enhanced Input Output Life Cycle Assessment, Joseph M. Wright

Dissertations

Stresses due to economic activity are threatening to exceed environmental and societal limits with the potential to jeopardize local communities and create global crises. This research proposes new methodologies and analytic techniques to comprehensively assess corporate sustainability and enhance the efficiency of estimating environmental and social impacts with Input Output Life Cycle Assessment (IOLCA).

Sustainability assessments and management require consideration of both social and environmental impacts as outflows of economic activity. There are a number of assessment tools available to gain insight into environmental and social impacts; but in most cases, these approaches lack essential components for a comprehensive and …

Modeling Of Electrical Grid Systems To Evaluate Sustainable Electricity Generation In Pakistan, Muhammad Mustafa Amjad

Masters Theses

Pakistan has always had a history of severe energy shortfalls, which rose up to an alarming 33% in 2013. This situation was countered by investments in the energy sector through the China Pakistan Economic Corridor (CPEC), which were unfortunately largely based on brown fuels. Although beneficial in the short term, these investments do not bode well for the climate scenario of Pakistan, with various parts of the country already having experienced temperatures rise of 1-3°C. To ensure that the current situation doesn’t exacerbate and is tackled in a timely manner, this research aims to examine how the untapped potential of …

Optimizing The Environmental And Economic Sustainability Of Remote Community Infrastructure, Jamie E. Filer, Justin D. Delorit, Andrew J. Hoisington, Steven J. Schuldt

Faculty Publications

Remote communities such as rural villages, post-disaster housing camps, and military forward operating bases are often located in remote and hostile areas with limited or no access to established infrastructure grids. Operating these communities with conventional assets requires constant resupply, which yields a significant logistical burden, creates negative environmental impacts, and increases costs. For example, a 2000-member isolated village in northern Canada relying on diesel generators required 8.6 million USD of fuel per year and emitted 8500 tons of carbon dioxide. Remote community planners can mitigate these negative impacts by selecting sustainable technologies that minimize resource consumption and emissions. However, …

Internet Of Things For Sustainable Mining, Abdul Salam

Faculty Publications

The sustainable mining Internet of Things deals with the applications of IoT technology to the coupled needs of sustainable recovery of metals and a healthy environment for a thriving planet. In this chapter, the IoT architecture and technology is presented to support development of a digital mining platform emphasizing the exploration of rock–fluid–environment interactions to develop extraction methods with maximum economic benefit, while maintaining and preserving both water quantity and quality, soil, and, ultimately, human health. New perspectives are provided for IoT applications in developing new mineral resources, improved management of tailings, monitoring and mitigating contamination from mining. Moreover, tools …

Sustainability-Based Expert System For Additive Manufacturing And Cnc Machining, Josage Chathura Pamuditha Perera

Graduate Theses, Dissertations, and Problem Reports

The development of technologies which enable resource efficient production is of paramount importance for the continued advancement of the manufacturing industry. In order to ensure a sustainable and clean energy future, manufacturers should be able to contrast and validate existing manufacturing technologies on a sustainability basis. In the post COVID-19 era of enterprise management, the use of artificial intelligence to simulate human expert decision making abilities will open new doors to achieving heightened levels of productivity and efficiency. The introduction of innovative technologies such as CNC machining and 3D printing to production systems has redefined the manufacturing landscape in a …

Simulation Evaluation Method Of Mission Sustainability For Operational Unit, Yan Xu, Junhai Cao, Tailiang Song, Gao Long, Zhang Qiang

Journal of System Simulation

Abstract: To analyze and evaluate support capabilities of operational units and scientifically describe the operational mission sustainability of weapon systems, the typical mission models for individual operational unit and operational units were established according to system engineering ideology. The mission status of operational units was defined, and the parameters including mission sustainability and equipment availability of operational units were proposed. An operational unit mission process simulation model was established with the agent-based method, which provides a simulation method for operational unit mission sustainability evaluation and technical means for the operational unit support capability assessment problem. A case study of …

Moving Toward Prevention: Rural Water Maintenance And Sustained Service Delivery, Caleb Cord, Jeffrey P. Walters, Harold Lockwood, Pranav Chintalapati, Amy Javernick-Will, Karl Linden

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

This paper outlines a research plan to be conducted across the Sustainable WASH Systems (SWS) Learning consortium to learn from maintenance approaches both internal and external to the partnership. It follows a study commissioned by IRC WASH and SWS which gathered information on prominent existing approaches from key informants.

System Dynamics Modelling As A Tool For Assessing Rural Water Sustainability, Pranav Chintalapati, Jeffrey P. Walters, Amy Javernick-Will, Karl Linden

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

System dynamics modelling is a tool that has been used for decades in business management and economics applications, but little focus has been applied to the WASH sector.

Specifically, this paper discusses the use of causal loop diagrams and stock flow diagrams as methods to better understand the systemic drivers affecting sustainability of rural water service delivery.

Natural Resources Governance Employing Blockchain-Based Decision-Making, Farinaz Sabz Ali Pour, Adrian Gheorghe

Engineering Management & Systems Engineering Faculty Publications

Natural resources are essential structures of socio-economic systems which shape the well-being of humanity, environment, and the economy. Human actions have become the critical responsibility for environmental changes and pressuring many planetary boundaries. Having a systematic approach can provide a governance platform including the inherent characteristics of the resource, the historically established form of use, and transaction costs. A natural resource governance framework is developed by applying Blockchain technology as the primary goal of this study to regulate and manage the extraction and trades. Blockchain technology provides a distributed concurrency monitoring system for sustainable resource management. Persistent and pervasive cooperation …

Logistics Best Practices For Regional Food Systems: A Review, Anuj Mittal, Caroline C. Krejci, Teri J. Craven

Industrial, Manufacturing, and Systems Engineering Faculty Publications

The modern industrial food supply system faces many major environmental and social sustainability challenges. Regional food systems, in which consumers prefer geographically proximate food producers, offer a response to these challenges. However, the costs associated with distributing food from many small-scale producers to consumers have been a major barrier to long-term regional food system success. Logistics best practices from conventional supply chains have the potential to improve the efficiency and effectiveness of regional food supply chains (RFSCs). This paper provides a structured and in-depth review of the existing literature on RFSC logistics, including recommended and implemented best practices. The purpose …

Aligning Skills In Personnel With The Lean System's Requirements, Anjushree Bangre

Masters Theses

The sustainability of lean systems for long term is a major concern across various organizations implementing lean manufacturing methods. This issue can be attributed to inadequate infrastructure, inefficient process management, unsuitable personnel management methods and strategic tools. There is a strong need for addressing the risks for lean system sustainability. The resolution of the risks from a 'soft side' (people) perspective has not been addressed. The primary focus of this study is on the people-related risks.

The current study elicits a five-phase approach to enhance the implementation of the lean system by accounting for these risks. The first phase classifies …

Modular Product Architecture’S Decisions Support For Remanufacturing-Product Service System Synergy, Johnson Adebayo Fadeyi

Wayne State University Dissertations

Remanufacturing is identified as the most viable product end-of-life (EOL) management strategy. However, about 80% of manufactured products currently end up as wastes. Besides other benefits, the product service system (PSS) could curtail the main bottlenecks to remanufacturing namely quantity, quality, recovery time of used product, and negative perception of remanufactured products. Therefore, the integration of PSS and remanufacturing has been increasingly recommended as an enhanced product offering. However, an integration that is informed by mathematical analysis is missing. Meanwhile, the variables that bolster the performance of PSS and remanufacturing are substantially influenced by product development (PD) decisions. Among the …