Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Operations Research, Systems Engineering and Industrial Engineering

2022

Institution
Keyword
Publication
Publication Type
File Type

Articles 1 - 30 of 694

Full-Text Articles in Engineering

Integrated Machine Learning And Optimization Approaches, Dogacan Yilmaz Dec 2022

Integrated Machine Learning And Optimization Approaches, Dogacan Yilmaz

Dissertations

This dissertation focuses on the integration of machine learning and optimization. Specifically, novel machine learning-based frameworks are proposed to help solve a broad range of well-known operations research problems to reduce the solution times. The first study presents a bidirectional Long Short-Term Memory framework to learn optimal solutions to sequential decision-making problems. Computational results show that the framework significantly reduces the solution time of benchmark capacitated lot-sizing problems without much loss in feasibility and optimality. Also, models trained using shorter planning horizons can successfully predict the optimal solution of the instances with longer planning horizons. For the hardest data set, …

Go to article

Supermarket And Water Spider Concept For Improving Door Sub-Assembly Productivity, Andreas Barnas, Aditya T. Pratama, Setijo Awibowo Dec 2022

Supermarket And Water Spider Concept For Improving Door Sub-Assembly Productivity, Andreas Barnas, Aditya T. Pratama, Setijo Awibowo

Makara Journal of Technology

This research is based on a case study at the door sub-assembly area of a German car manufacturer in Indonesia. The door sub-assembly area is responsible for assembling doors to be supplied to the specific station in assembly line that will assemble the finished doors to the car. The area had a problem in supplying the doors to the main assembly line on time. This means, the cycle time of door sub-assembly is higher than that of the assembly line. After observation, the factor that greatly contributes to the high cycle time can be identified, which is motion waste. Therefore, …

Go to article

Overview Of Research And Application On Autonomous Vehicle Oriented Perception System Simulation, Ruoxuan Wang, Jianping Wu, Hui Xu Dec 2022

Overview Of Research And Application On Autonomous Vehicle Oriented Perception System Simulation, Ruoxuan Wang, Jianping Wu, Hui Xu

Journal of System Simulation

Abstract: Following the rapid progress of science and technology, vehicles with autonomous driving or auxiliary driving function enter into vehicle market. However, in the past decade, traffic accidents still occurred frequently, and the safety of these functions become the focus. Simulation technology provides a good platform to test the perception system of autonomous vehicle. Focus on the sensor simulation modeling of autonomous vehicle perception system, from the perspective of single sensor simulation, multi-sensor simulation and classic simulation platform including millimeter wave radar, lidar and camera, the existing research are reviewed, and the shortcomings and development trends of simulation modeling of …

Go to article

Simulation-Driven Based Utility Evaluation And Recommendation Of Expressway Proactive Speed Limit, Geqi Qi, Sijin Liu, Yikang He, Meng Wang, Ailing Huang Dec 2022

Simulation-Driven Based Utility Evaluation And Recommendation Of Expressway Proactive Speed Limit, Geqi Qi, Sijin Liu, Yikang He, Meng Wang, Ailing Huang

Journal of System Simulation

Abstract: Outside the specific punishment area, the traditional roadside passive speed limit mode lacks traffic management, and thus which indirectly leads to the inconsistency or even sudden change of vehicle behaviors in time and space, thereby affects the traffic efficiency and safety. Focusing on the proactive speed limit mode at vehicle side, a utility evaluation and recommendation method is proposed, which carries out the multi-scenario traffic simulation for varied proactive and passive speed limit considering road line types, traffic flow and vehicle type proportion. From the two perspectives of safety and efficiency, the utility evaluation indicators and weights are extracted …

Go to article

Short-Term Prediction Method Of Wind Power Based On Blp-Alo-Svm, Yefeng Jiao, Yan Wang, Zhicheng Ji Dec 2022

Short-Term Prediction Method Of Wind Power Based On Blp-Alo-Svm, Yefeng Jiao, Yan Wang, Zhicheng Ji

Journal of System Simulation

Abstract: To effectively predict the short-term wind power and its fluctuation range, a prediction method based on hybrid algorithm-optimized support vector machine is proposed. Exploratory data analysis is used to preprocess the original wind speed data to improve the data quality. Chaotic map, Levy flight strategy and particle swarm optimization are used to improve the ant lion algorithm. The support vector machine model optimized by hybrid algorithm is used to predict the wind power. The experimental results show that, compared with the new wind power prediction model, the prediction error of the output results of the method is lower, and …

Go to article

Low Voltage Ride-Through Modeling For Wind Turbines Based On Neural Odes, Qiping Lai, Tannan Xiao, Dongsheng Li, Chen Shen Dec 2022

Low Voltage Ride-Through Modeling For Wind Turbines Based On Neural Odes, Qiping Lai, Tannan Xiao, Dongsheng Li, Chen Shen

Journal of System Simulation

Abstract: Considering the difficulty of equivalent modeling of low voltage ride-through(LVRT) characteristics of a wind farm, a neural ordinary differential equation(ODE)-based wind farm LVRT modeling methodis proposed. The input of the model is the voltage and wind speed of each wind turbine at the grid connection point of wind farm, and the output is the current at the grid connection point. The model can better characterize the strong nonlinear switching process and describe LVRT characteristics of wind farms under different wind speed scenarios. A simulation example of a wind farm including three doubly-fed induction generators(DFIGs) is established on …

Go to article

Anomaly Detection Method Of Electrical Power Consumption Based On Deep Autoencoder, Ningke Sun, Yan Wang, Zhicheng Ji Dec 2022

Anomaly Detection Method Of Electrical Power Consumption Based On Deep Autoencoder, Ningke Sun, Yan Wang, Zhicheng Ji

Journal of System Simulation

Abstract: Aiming at the nonlinear and non-stationary characteristics of electrical power consumption data, an abnormal electrical power consumption detection model based on deep autoencoder is proposed. Gated recurrent unit (GRU) network of the deep learning is combined with autoencoder structure, and the encoder and decoder parts of traditional autoencoder are realized by gated recurrent unit network, which gives full play to the data feature extraction capability of gated recurrent unit and the data reconstruction function of autoencoder structure. Based on the reconstruction error between original data and reconstructed data, abnormal data points of the electrical power consumption are detected. By …

Go to article

Sis-Based Modeling And Simulation Analysis On Exercise Benefit Perception Transmission, Lei Wang, Jinhai Sun, Tuojian Li Dec 2022

Sis-Based Modeling And Simulation Analysis On Exercise Benefit Perception Transmission, Lei Wang, Jinhai Sun, Tuojian Li

Journal of System Simulation

Abstract: In order to distinguish the relationship between individual health behavior change and collective health behavior emergence, deal with the challenges of mathematical description of typical health information dissemination processes in social networks and social experiments, SIS(susceptible-infected-susceptible)model is introduced to simulate the dissemination process of classical health information exercise effect perception to meet the requirements of social system complexity, individual diversity and intelligence. To carry out numerical experiments on the propagation process of exercise effect perception to identify the phase change process of the collective health behavior emergence, agent-based modeling and simulation are utilized through NetLogo. Experimental results show …

Go to article

Simulation On Flood Disaster In Urban Building Complex System Based On Lbm, Shen Zhang, Zewang Yang, Yifan Wang, Liang Sun, Ming Cheng, Fankai Meng, Ting Li Dec 2022

Simulation On Flood Disaster In Urban Building Complex System Based On Lbm, Shen Zhang, Zewang Yang, Yifan Wang, Liang Sun, Ming Cheng, Fankai Meng, Ting Li

Journal of System Simulation

Abstract: Because of the extreme climate change, the potential flood disaster risk in the southeast coastal areas of China can not be ignored. Based on lattice Boltzmann computational fluid dynamics method, a three-dimensional simulation study of waterlogging process in tsunami impact scenario is carried out for a coastal city building complex system, and the reliability and accuracy of the numerical simulation method for the flood impact test of an ideal building complex are verified. The results show that the buildings along rivers and coastlines have obvious cloaking effect, while the buildings inside the city are less affected by floods. The …

Go to article

Long-Term Resilience Simulation On Low-Carbon Urban Grid Based On Evolutionary Game, Zhengda Cui, Weiqiang Yao, Qin Xu, Chen Fang, Ying Chen Dec 2022

Long-Term Resilience Simulation On Low-Carbon Urban Grid Based On Evolutionary Game, Zhengda Cui, Weiqiang Yao, Qin Xu, Chen Fang, Ying Chen

Journal of System Simulation

Abstract: Because of the more frequent extreme disasters, the resilience of urban grid becomes more important. In the background of carbon neutralization policy, the decarbonization transition of urban grid also affects the development of grid resilience. An evolutionary game is used to simulate the resilience evolution of low-carbon urban grid and the evolution model is constructed. The decision to install photovoltaic and energy storage system for residents and to upgrade the grid for resilience is considered in the model and the stability conditions of equilibriums of the evolutionary game are analyzed. The resilience evolution simulation model considering disaster stochasticity is …

Go to article

Research On Complex Combat Network Dynamic Evolution Based On Information Entropy, Lianyi Zhang, Xisheng Shen, Duzheng Qing, Han Zhang, Min Zhou, Xifu Wang Dec 2022

Research On Complex Combat Network Dynamic Evolution Based On Information Entropy, Lianyi Zhang, Xisheng Shen, Duzheng Qing, Han Zhang, Min Zhou, Xifu Wang

Journal of System Simulation

Abstract: Network-centric warfare, distributed and decentralized command and control gradually replace separately the traditional platform-centric warfare and centralized command and control, and information has become a combat capability. Based on the new information weapon equipment system operation loop, a complex combat network model based on information entropy is constructed, and the combat capability measurement method is proposed. On the basis of the combat capability upgrade being the network driving force, the dynamic evolution rule of the complex combat network is designed and the preferential evolution and stochastic evolution models are constructed. According to a typical system combat example, the influence …

Go to article

Research On Modeling And Simulation Technology Of Microwave Radar High Precision Tracking Loop, Jiaji Lou, Jing Ma, Xiaowei Li, Yue Zhao, Youbin Song Dec 2022

Research On Modeling And Simulation Technology Of Microwave Radar High Precision Tracking Loop, Jiaji Lou, Jing Ma, Xiaowei Li, Yue Zhao, Youbin Song

Journal of System Simulation

Abstract: Aiming at the key problem of high-precision tracking loop design of a measurement radar for the weak signal (low carrier to noise ratio signal) in dynamic environment, the design and optimization methods of carrier tracking loop and code tracking loop are focused on. A signal structure with a single carrier as a pilot is proposed, and the loop structure of the frequency-locked loop and the phase-locked loop working together is studied. The modeling and simulation on the two structures show that for the week signal tracking in a dynamic environment, the loop combination structure of the frequency-serial auxiliary …

Go to article

Research On Parameter Construction Method Of Blue Army Equipment Model Based On A Deep Network, Boyuan Zhang, Guanghong Gong, Ze Wang, Ni Li Dec 2022

Research On Parameter Construction Method Of Blue Army Equipment Model Based On A Deep Network, Boyuan Zhang, Guanghong Gong, Ze Wang, Ni Li

Journal of System Simulation

Abstract: The modeling of blue army equipment is an indispensable part of adversarial simulation environment construction. Aiming at the limited available parameters of "information-poor" and "small sample" characteristics to the blue system, a deep network-based method is proposed to generate the parameters of blue army equipment model. By injecting the information into the simulation model of the blue army equipment, the simulation data is generated and trained in the deep neural network. The obtained network has a certain generalization ability to the unknown parameters prediction of the same type of equipment and can be used directly in prediction or be …

Go to article

Fast Generation Method Of Multi-Sensing Channel Fusion Virtual Experiment, Jingwei Deng, Hanwu He, Yueming Wu, Jianhao Su Dec 2022

Fast Generation Method Of Multi-Sensing Channel Fusion Virtual Experiment, Jingwei Deng, Hanwu He, Yueming Wu, Jianhao Su

Journal of System Simulation

Abstract: Aiming at the low development efficiency and single experience in traditional virtual experiments, a rapid generation method of multi-sensing channel fusion virtual experiment visualization is proposed. The experimental steps and sequence of experimental steps of the virtual experiment are defined. A parameterized description method of experimental elements based on Petri net is proposed to describe the sequence of experimental steps, which breaks through the constraints the established procedure steps of traditional virtual experiments and supports the exploratory virtual experiments. The visual expression method of the routing graph and the conversion method between the routing graph and the Petri …

Go to article

Multi-Robot Path Planning Based On Cbs Algorithm, Qiao Qiao, Yan Wang, Zhicheng Ji Dec 2022

Multi-Robot Path Planning Based On Cbs Algorithm, Qiao Qiao, Yan Wang, Zhicheng Ji

Journal of System Simulation

Abstract: Aiming at the long multi-robot planning path and long one-way search running time of conflict-based search(CBS) in the multi-agent path finding(MAPF), an improved CBS algorithm is proposed, which in a two-way A* focus search is used to optimize the search direction and search method. The suboptimal factorωis introduced into the underlying search function of the CBS algorithm to improve the efficiency of path search. The one-way search in the conflict search algorithm is optimized to a two-way A* search. The experimental results show that the path cost of the improved CBS algorithm is shortened …

Go to article

Reliability Parameter Optimization Complex System Simulation Based On R-Vikor Method, Zhiguang Wang, Baiting Liu, Xiaolei Wang, Tao Liu, Zhaowei Yang Dec 2022

Reliability Parameter Optimization Complex System Simulation Based On R-Vikor Method, Zhiguang Wang, Baiting Liu, Xiaolei Wang, Tao Liu, Zhaowei Yang

Journal of System Simulation

Abstract: The operation of complex simulation system is not isolated, and always affected by multiple external factors and its own performance. In simulation reliability calculation, parameters need to be chosen, and different performance indexes need to be taken into account when comparing with the reference model. The research is transformed into the multi-attribute decision. An system simulation trusted parameter optimization method based on R-VIKOR(resist rank reversal of visekriterijumska optimizacija | kompromisno resenje) is proposed. Multiple sets of aerodynamic parameters of the new model are obtained through model migration theory, and similarity calculation is carried out with the optimal parameters of …

Go to article

Research On Low Computational Predictive Control Strategy Of Three-Level Four-Arm Apf, Guifeng Wang, Jinxing Guo Dec 2022

Research On Low Computational Predictive Control Strategy Of Three-Level Four-Arm Apf, Guifeng Wang, Jinxing Guo

Journal of System Simulation

Abstract: Four-arm active power filter(APF) is an ideal device to the power quality of three-phase four-wire distribution network. Owing to the sufficient number of base vectors, three-level four-arm APF has better current tracking performance, but the prediction calculation amount is too large when model predictive current control is applied. A model prediction voltage control strategy based on the idea of space stratification is proposed. Based on the deadbeat control idea and the discrete mathematical model in αβγ coordinate system, the expected reference voltage is predicted from the reference current, and the multiple current predictions are converted into the single voltage …

Go to article

Research On Emotional Contagion And Intervention Strategy Of Indoor Evacuation Based On Risk Perception, Yang Zeng, Jinling Li, Haixiang Guo, Weiming Chen Dec 2022

Research On Emotional Contagion And Intervention Strategy Of Indoor Evacuation Based On Risk Perception, Yang Zeng, Jinling Li, Haixiang Guo, Weiming Chen

Journal of System Simulation

Abstract: Aiming at the panic emotion contagion in the indoor emergency evacuation with multi-exit and multi-obstacle, an emotional contagion model is constructed on personality traits, risk perception differences of age and gender, and consciousness regulation. The simulation is carried out by using AnyLogic, which combines individual emotions with evacuation speed to realize the real-time updating of emotional state and speed. That personnel intervention in the process of evacuation can effectively alleviate the spread of panic emotion, is verified and can provide the theoretical basis for panic contagion in the process of emergency evacuation. The results show that the degree of …

Go to article

Simulation Research On Appearance Detection Of Ampoules Based On Lightweight Network And Model Compression, Zhihao Zhu, Yan Wang, Zhicheng Ji Dec 2022

Simulation Research On Appearance Detection Of Ampoules Based On Lightweight Network And Model Compression, Zhihao Zhu, Yan Wang, Zhicheng Ji

Journal of System Simulation

Abstract: Aiming at the large scale and redundant parameters of target detection network model, which result in the difficult to deploy the ampoule bottle appearance defect detection model to edge devices, an LC-Faster R-CNN defect detection algorithm based on lightweight network and model compression is proposed. MobileNet-V2 is used as the backbone, and the redundant channels in the convolutional network are trimmed by model pruning strategy. The floating-point parameters are quantized into integers through saturation truncation mapping. Knowledge distillation is used to restore the accuracy of the compressed network. Tested on the self-built ampoule appearance defect dataset, the model volume …

Go to article

Research On Iterative Calculation And Optimization Methods Of Aero-Engine On-Board Model, Xinghua Luo, Jia Geng, Ming Li, Bei Liu, Lei Wang, Zhiping Song Dec 2022

Research On Iterative Calculation And Optimization Methods Of Aero-Engine On-Board Model, Xinghua Luo, Jia Geng, Ming Li, Bei Liu, Lei Wang, Zhiping Song

Journal of System Simulation

Abstract: Aeroengine is a complex and time-varying multivariable thermophysical system. The research on the convergence accuracy and rate of the component-level model is of great significance to the model-based engine health management, performance and fault-tolerant control. The existing engine component-level models are generally based on the traditional quasi-Newton method to solve the equilibrium equations simultaneously. Compared with the traditional Newton-Raphson method (N-R method), the convergence speed is optimized, but it is difficult to meet accuracy and real-time requirements of the dynamic model airborne applications within the full envelope. An adaptive variable step factor quasi-Newton method is proposed, which can reduce …

Go to article

An Investigation Of The Role Of System Effectiveness In The Acquisition And Sustainment Of U.S. Defense Systems: 1958 To 2022, John Green Dec 2022

An Investigation Of The Role Of System Effectiveness In The Acquisition And Sustainment Of U.S. Defense Systems: 1958 To 2022, John Green

Operations Research and Engineering Management Theses and Dissertations

This dissertation investigates the role of the system effectiveness methodology in acquiring and sustaining U.S. military weapons systems from 1958 to 2021. The period of interest has seen numerous changes in both the acquisition process and the application of system effectiveness to acquisition and sustainment. Several of the changes were disruptive, including shifting acquisition and sustainment to a commercial paradigm and completely overhauling the approach to acquiring new systems. The method of inquiry integrated three qualitative methods–structured literature review, grounded theory analysis, and historiography–into an innovative approach for investigating the changes to system effectiveness. The database for the investigation was …

Go to article

Compact Formulation Of Multicommodity Network Flows With Applications To The Backhaul Profit Maximization Problem And Fixed Charge Network Flow Problem, Yulan Bai Dec 2022

Compact Formulation Of Multicommodity Network Flows With Applications To The Backhaul Profit Maximization Problem And Fixed Charge Network Flow Problem, Yulan Bai

Operations Research and Engineering Management Theses and Dissertations

The triples formulation is a compact formulation of multicommodity network flow problems that provides a different representation of flow than the traditional and widely used node-arc and arc-path approaches. In the literature, the triples formulation has been applied successfully to the maximum concurrent flow problem and to a network optimization problem with piecewise linear convex costs. This dissertation applies the triples formulation to the backhaul profit maximization problem (BPMP) and the fixed charge network flow problem (FCNF). It is shown that the triples representation of multicommodity flow significantly reduces the number of variables and constraints in the mixed integer programming …

Go to article

Risk Management Of Carbon Steel Piping In Sweet Environment Multiphase Fluid Production, Triadhi Panthun Tiggor, Rini Riastuti Dec 2022

Risk Management Of Carbon Steel Piping In Sweet Environment Multiphase Fluid Production, Triadhi Panthun Tiggor, Rini Riastuti

Journal of Materials Exploration and Findings

As well reserved depleted and limited, it is necessary to lower the capital expenditure so that lifting SZ reservoir be more profitable. This article first contextualizes the effort done to increase the hydrocarbon lifting in a mature field. Despite the importance to sustain the production, and massive studies done to quantify the associate risk, no structured methodology proposed to manage the risk in respect to optimize the production expenditure by selection of carbon steel as alternative for corrosion resistance material piping. Hence, this article proposed a framework to support the decision-making process to operate in safely manner. Real case study …

Go to article

Dynamic Rbi With Central Difference Method Approach In Calculation Of Uniform Corrosion Rate: A Casestudy On Gas Pipelines, M.Riefqi Dwi Alviansyah, Fernanda Hartoyo, Zahra Nadia Nurullia, Ari Kurniawan Dec 2022

Dynamic Rbi With Central Difference Method Approach In Calculation Of Uniform Corrosion Rate: A Casestudy On Gas Pipelines, M.Riefqi Dwi Alviansyah, Fernanda Hartoyo, Zahra Nadia Nurullia, Ari Kurniawan

Journal of Materials Exploration and Findings

The oil and gas industry generally uses a piping system to drain fluids. Even though the pipes used have been well designed, the use of pipes as a means of fluid transportation still provides the possibility of failure that can occur at any time, one of which is due to uniform corrosion. The use of standard Risk Based Inspection (RBI) according to the API RBI 581 document has been widely used to anticipate potential failures to pipe components. The use of standard RBI can reduce the risk of failure significantly. Because the standard RBI considers the component risk value to …

Go to article

Development Of Directed Randomization For Discussing A Minimal Security Architecture, Henrique Oyama, Dominic Messina, Keshav Kasturi Rangan, Akkarakaran Francis Leonard, Kip Nieman, Helen Durand, Katie Tyrrell, Katrina Hinzman, Michael Williamson Dec 2022

Development Of Directed Randomization For Discussing A Minimal Security Architecture, Henrique Oyama, Dominic Messina, Keshav Kasturi Rangan, Akkarakaran Francis Leonard, Kip Nieman, Helen Durand, Katie Tyrrell, Katrina Hinzman, Michael Williamson

Chemical Engineering and Materials Science Faculty Research Publications

Strategies for mitigating the impacts of cyberattacks on control systems using a control-oriented perspective have become of greater interest in recent years. Our group has contributed to this trend by developing several methods for detecting cyberattacks on process sensors, actuators, or both sensors and actuators simultaneously using an advanced optimization-based control strategy known as Lyapunov-based economic model predictive control (LEMPC). However, each technique comes with benefits and limitations, both with respect to one another and with respect to traditional information technology and computer science-type approaches to cybersecurity. An important question to ask, therefore, is what the goal should be of …

Go to article

Investigating Applications Of Deep Learning For Diagnosis Of Post Traumatic Elbow Disease, Hugh James Dec 2022

Investigating Applications Of Deep Learning For Diagnosis Of Post Traumatic Elbow Disease, Hugh James

McKelvey School of Engineering Theses & Dissertations

Traumatic events such as dislocation, breaks, and arthritis of musculoskeletal joints can cause the development of post-traumatic joint contracture (PTJC). Clinically, noninvasive techniques such as Magnetic Resonance Imaging (MRI) scans are used to analyze the disease. Such procedures require a patient to sit sedentary for long periods of time and can be expensive as well. Additionally, years of practice and experience are required for clinicians to accurately recognize the diseased anterior capsule region and make an accurate diagnosis. Manual tracing of the anterior capsule is done to help with diagnosis but is subjective and timely. As a result, there is …

Go to article

Practical Requirements Elicitation In Modern Product Development: A Multi-Case Study In Discontinuous Innovation, Michael King Dec 2022

Practical Requirements Elicitation In Modern Product Development: A Multi-Case Study In Discontinuous Innovation, Michael King

Theses and Dissertations

Practical modern product development, specifically rapid, lean efforts to create new disrupting or specialized products, face constraints that require modified requirements elicitation (RE) techniques. Requirements elicitation conventions have not been updated to address the challenges of these approaches, and industry practitioners lack the tools to select the most efficient techniques. This study examines the RE approaches performed by three resource-limited teams conducting discontinuous new product development through a multi-case study to identify gaps between the literature and practice, with suggestions to fill them. Our findings suggest modern RE practices and challenges closely reflect those found by studies on RE in …

Go to article

Developing An Early Life Cycle Manufacturability Assessment For Conceptual Designs, Tonya Gamblin Mccall Dec 2022

Developing An Early Life Cycle Manufacturability Assessment For Conceptual Designs, Tonya Gamblin Mccall

Theses and Dissertations

Studies have shown that 70 – 80% of a product's life cycle costs are committed by the end of the product design phase (Anderson, 2014; National Research Council, 1991; Swift, 1987). This supports the general claim that decision making in the conceptual stage drives the cost throughout the life cycle. The use of concurrent engineering has been viewed as the answer to this problem, offering the Design for Excellence (DFX) as one approach for evaluating product designs across specific disciplines. This research focuses on a subset of DFX referred to as Design for Manufacturability to develop a means to assess …

Go to article

Towards Structured Planning And Learning At The State Fisheries Agency Scale, Caleb A. Aldridge Dec 2022

Towards Structured Planning And Learning At The State Fisheries Agency Scale, Caleb A. Aldridge

Theses and Dissertations

Inland recreational fisheries has grown philosophically and scientifically to consider economic and sociopolitical aspects (non-biological) in addition to the biological. However, integrating biological and non-biological aspects of inland fisheries has been challenging. Thus, an opportunity exists to develop approaches and tools which operationalize planning and decision-making processes which include biological and non-biological aspects of a fishery. This dissertation expands the idea that a core set of goals and objectives is shared among and within inland fisheries agencies; that many routine operations of inland fisheries managers can be regimented or standardized; and the novel concept that current information and operations can …

Go to article

Understanding Cnc Capacity Through Production Time Estimation, Kaitlin Bluhm Dec 2022

Understanding Cnc Capacity Through Production Time Estimation, Kaitlin Bluhm

Honors Theses

Landscape Forms is a high-end outdoor furniture company. This thesis was completed at the Landscape Forms woodshop located in Kalamazoo, MI. Landscape Forms initially reached out regarding their CNC machines being the bottleneck and it was determined that the current product standards and capacity of the CNC machines at Landscape Forms were not accurate. This causes issues when planning and scheduling their incoming orders. During this thesis, two tools were developed over the course of two semesters. The first tool helped to create accurate product standards for their CNC machines depending on the different product types and second, a CNC …

Go to article

Next Last