Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 3421 - 3450 of 16703

Full-Text Articles in Engineering

Aerosol Synthesis Of Tungsten Bronze Particles For Nir Shielding, Hao Tu Jan 2023

Aerosol Synthesis Of Tungsten Bronze Particles For Nir Shielding, Hao Tu

Theses and Dissertations

This dissertation emphasizes the need for efficient energy use in buildings and transportation due to global warming and the energy crisis. It suggests that improving energy efficiency can help reduce energy consumption and emissions and support sustainability. The dissertation introduces various transparent materials that can block near-infrared (NIR) radiation from solar radiation to save energy and money, and it highlights the growing market value of such products. The dissertation compares tungsten bronze with other NIR shielding materials and shows its advantages. The dissertation introduces a cheap and environmentally friendly method for continuously producing tungsten bronze particles via aerosol synthesis. Particle …

Go to article

Predicting Dissolution Kinetics Of Tricalcium Silicate Using Deep Learning And Analytical Models, Taihao Han, Sai Akshay Ponduru, Arianit Reka, Jie Huang, Gaurav Sant, Aditya Kumar Jan 2023

Predicting Dissolution Kinetics Of Tricalcium Silicate Using Deep Learning And Analytical Models, Taihao Han, Sai Akshay Ponduru, Arianit Reka, Jie Huang, Gaurav Sant, Aditya Kumar

Electrical and Computer Engineering Faculty Research & Creative Works

The dissolution kinetics of Portland cement is a critical factor in controlling the hydration reaction and improving the performance of concrete. Tricalcium silicate (C3S), the primary phase in Portland cement, is known to have complex dissolution mechanisms that involve multiple reactions and changes to particle surfaces. As a result, current analytical models are unable to accurately predict the dissolution kinetics of C3S in various solvents when it is undersaturated with respect to the solvent. This paper employs the deep forest (DF) model to predict the dissolution rate of C3S in the undersaturated solvent. The …

Go to article

Conductive 3d Nano-Biohybrid Systems Based On Densified Carbon Nanotube Forests And Living Cells, Roya Bagheri, Alicia K. Ball, Masoud Kasraie, Aparna Chandra, Xinqian Chen, Ibrahim Miskioglu, Zhiying Shan, Parisa Pour Shahid Saeed Abadi Jan 2023

Conductive 3d Nano-Biohybrid Systems Based On Densified Carbon Nanotube Forests And Living Cells, Roya Bagheri, Alicia K. Ball, Masoud Kasraie, Aparna Chandra, Xinqian Chen, Ibrahim Miskioglu, Zhiying Shan, Parisa Pour Shahid Saeed Abadi

Michigan Tech Publications

Conductive biohybrid cell-material systems have applications in bioelectronics and biorobotics. To date, conductive scaffolds are limited to those with low electrical conductivity or 2D sheets. Here, 3D biohybrid conductive systems are developed using fibroblasts or cardiomyocytes integrated with carbon nanotube (CNT) forests that are densified due to interactions with a gelatin coating. CNT forest scaffolds with a height range of 120–240 µm and an average electrical conductivity of 0.6 S/cm are developed and shown to be cytocompatible as evidenced from greater than 89% viability measured by live-dead assay on both cells on day 1. The cells spread on top and …

Go to article

An Experimental Study On The Mechanical Properties And Chemical Composition Of Lcd 3d Printed Specimens, Sebastian Gomez Jan 2023

An Experimental Study On The Mechanical Properties And Chemical Composition Of Lcd 3d Printed Specimens, Sebastian Gomez

College of Graduate Studies: Theses & Dissertations

Additive manufacturing technologies have been enhanced throughout the years yet have surprised the manufacturing industry due to their high-end surface finish and dimensional accuracy. Different experiments have been done to identify a specific phenomenon known in the vat-polymerization field. Distortion and dimensional inaccuracy tend to affect the overall properties of the process, either physical or chemical. This approach allows the understanding of how the physical properties have been affected and how to study the chemical properties to avoid this type of phenomenon. The chemical reaction between polymer and UV light has been studied and experimented with to the point that …

Go to article

Comparison Of The Thermal Stability In Equal-Channel-Angular-Pressed And High-Pressure-Torsion-Processed Fe–21cr–5al Alloy, Maalavan Arivu, Andrew Hoffman, Jiaqi Duan, Jonathan Poplawsky, Xinchang Zhang, Frank W. Liou, Rinat Islamgaliev, Ruslan Valiev, Haiming Wen Jan 2023

Comparison Of The Thermal Stability In Equal-Channel-Angular-Pressed And High-Pressure-Torsion-Processed Fe–21cr–5al Alloy, Maalavan Arivu, Andrew Hoffman, Jiaqi Duan, Jonathan Poplawsky, Xinchang Zhang, Frank W. Liou, Rinat Islamgaliev, Ruslan Valiev, Haiming Wen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Nanostructured Steels Are Expected to Have Enhanced Irradiation Tolerance and Improved Strength. However, They Suffer from Poor Microstructural Stability at Elevated Temperatures. in This Study, Fe–21Cr–5Al–0.026C (Wt%) Kanthal D (KD) Alloy Belonging to a Class of (FeCrAl) Alloys Considered for Accident-Tolerant Fuel Cladding in Light-Water Reactors is Nanostructured using Two Severe Plastic Deformation Techniques of Equal-Channel Angular Pressing (ECAP) and High-Pressure Torsion (HPT), and their Thermal Stability between 500–700 °C is Studied and Compared. ECAP KD is Found to Be Thermally Stable Up to 500 °C, Whereas HPT KD is Unstable at 500 °C. Microstructural Characterization Reveals that ECAP KD …

Go to article

Correction: Modeling Phase Selection And Extended Solubility In Rapid Solidified Alloys (Metallurgical And Materials Transactions A, (2023), 10.1007/S11661-023-07221-7), Azeez Akinbo, Yijia Gu Jan 2023

Correction: Modeling Phase Selection And Extended Solubility In Rapid Solidified Alloys (Metallurgical And Materials Transactions A, (2023), 10.1007/S11661-023-07221-7), Azeez Akinbo, Yijia Gu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In the original online version of this article the reference citation in Fig. 3b was incorrect. The original article was corrected.

Go to article

Preparation, Cure, And Characterization Of Cyanate Ester-Epoxy Blends Containing Reactive Flame Retardants, Mustafa Mukhtar, Donald A. Klosterman Jan 2023

Preparation, Cure, And Characterization Of Cyanate Ester-Epoxy Blends Containing Reactive Flame Retardants, Mustafa Mukhtar, Donald A. Klosterman

Chemical and Materials Engineering Faculty Publications

Cyanate ester resins are sometimes mixed with lower cost epoxy monomers to modify cost, toughness, and processing capabilities. Despite the high performance of these thermosetting polymers, flame retardancy remains an issue. This study examined blends of three different commercial cyanate ester monomers (LVT-100, LECy, and XU-71787.02) and diglycidyl ether of bisphenol A (DGEBA) at 50/50 wt% of each type. The blends were successfully reacted with two reactive flame retardants (FR): 9,10-dihydro-9-ox-9-phosphaphenanthrene-10-oxide (DOPO) and poly(m-phenylene methylphosphonate) (PMP) at phosphorus contents ranging from 0 to 3 wt%. The curing behavior of EP/CE blends was investigated using differential scanning calorimetry (DSC). It was …

Go to article

การเตรียมและประสิทธิภาพการเร่งปฏิกิริยาเชิงแสงของวัสดุเชิงประกอบสตรอนเชียมไททาเนตที่เจือด้วยอะลูมิเนียม/กราฟิติกคาร์บอนไนไตรด์ภายใต้แสงที่ตามองเห็น, ณัฐรุจา โตวิรัตน์กิจ Jan 2023

การเตรียมและประสิทธิภาพการเร่งปฏิกิริยาเชิงแสงของวัสดุเชิงประกอบสตรอนเชียมไททาเนตที่เจือด้วยอะลูมิเนียม/กราฟิติกคาร์บอนไนไตรด์ภายใต้แสงที่ตามองเห็น, ณัฐรุจา โตวิรัตน์กิจ

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้มีวัตถุประสงค์เพื่อเตรียมตัวเร่งปฏิกิริยาเชิงแสงของวัสดุเชิงประกอบสตรอนเชียมไททาเนตที่เจือด้วยอะลูมิเนียม/กราฟิติกคาร์บอนไนไตรด์ (Al-SrTiO3/g-C3N4) สำหรับการย่อยสลายสีย้อมโรดามีนบีและการผลิตแก๊สไฮโดรเจนจากกระบวนการแยกน้ำภายใต้การฉายแสงที่ตามองเห็น โดย SrTiO3 เตรียมด้วยวิธีปฏิกิริยาสถานะของแข็งที่อุณหภูมิ 1300 °C เป็นเวลา 12 ชั่วโมง จากนั้นนำ SrTiO3 มาเจือด้วยอะลูมิเนียม 2% โดยโมล โดยการเติมผงอะลูมินา (Al2O3) ผ่านกระบวนการฟลักซ์ด้วยการเติมเกลือสตรอนเซียมคลอไรด์ (SrCl2) ในเบ้าหลอมอะลูมินาที่อุณหภูมิ 1150 °C เป็นเวลา 10 ชั่วโมง พบว่า Al-SrTiO3 ที่ผ่านการบำบัดด้วยฟลักซ์แสดงประสิทธิภาพการย่อยสลายสีย้อมโรดามีนบีที่ดีขึ้นภายใต้แสงยูวีเมื่อเทียบกับ SrTiO3 ที่ไม่ได้ผ่านการบำบัด โดย Al-SrTiO3 ที่ผ่านการบำบัดด้วยฟลักซ์มีประสิทธิภาพการย่อยสลายสีย้อม 21.66% หลังจาก 60 นาที ซึ่งสูงกว่าประสิทธิภาพ 3.1% ของ SrTiO3 ที่สังเคราะห์โดยวิธีปฏิกิริยาสถานะของแข็งถึงเจ็ดเท่า การปรับปรุงนี้เกิดจากการบำบัดด้วยฟลักซ์ที่ช่วยเพิ่มความเป็นผลึกและส่งเสริมการแทรกตัวของ Al3+ ในโครงสร้างเพอรอฟสไกต์ของ SrTiO3 รวมถึงการสร้างตำหนิช่องว่างของออกซิเจนและลดการเกิด Ti3+ ที่เป็นอุปสรรคต่อกระบวนการเร่งปฏิกิริยาเชิงแสง จากนั้นนำ Al-SrTiO3 ที่ได้มาเตรียมวัสดุเชิงประกอบ Al-SrTiO3/g-C3N4 (5% Al-SrTiO3) ด้วยวิธีต่าง ๆ พบว่าวิธีการเผาแคลไซน์ร่วมแสดงประสิทธิภาพการย่อยสลายสีย้อมโรดามีนบีภายใต้แสงที่ตามองเห็นสูงที่สุด เมื่อเปรียบเทียบกับการเตรียมด้วยวิธีการบดผสมเชิงกล วิธีการกระจายในตัวกลาง และวิธีไฮโดรเทอร์มอล เนื่องจากวิธีการเผาแคลไซน์ร่วมทำให้ได้พื้นที่ผิวจำเพาะที่สูงขึ้น ซึ่งช่วยเพิ่มการดูดซับและการย่อยสลายสีย้อม รวมทั้งลดการรวมตัวของอิเล็กตรอนและโฮล อย่างไรก็ตามวัสดุเชิงประกอบ Al-SrTiO3/g-C3N4 ยังแสดงประสิทธิภาพการย่อยสลายสีย้อมโรดามีนบีภายใต้แสงที่ตามองเห็นต่ำกว่า g-C3N4 บริสุทธิ์เล็กน้อย ในการทดสอบประสิทธิภาพการผลิตแก๊สไฮโดรเจนของ Al-SrTiO3 ภายใต้แสงยูวีเมื่อเติมตัวเร่งปฏิกิริยาร่วมโรเดียมโครเมียมออกไซด์ (RhCrOx) 0.1% โดยน้ำหนัก พบว่า อัตราการผลิตแก๊สไฮโดรเจนเท่ากับ 568 ไมโครโมลต่อกรัมต่อชั่วโมง และเมื่อเติมไตรเอทาโนลามีน (triethanolamine, TEOA) เป็นสารเอื้อให้เกิดปฏิกิริยาเพื่อจับโฮลในแถบวาเลนซ์ อัตราการผลิตไฮโดรเจนเพิ่มขึ้นเป็น 826 ไมโครโมลต่อกรัมต่อชั่วโมง เนื่องจากอิเล็กตรอนสามารถเข้าร่วมในปฏิกิริยารีดักชันได้มากขึ้น เมื่อนำวัสดุเชิงประกอบ Al-SrTiO3/g-C3N4 ที่เตรียมด้วยวิธีการเผาแคลไซน์ร่วมที่สัดส่วนต่าง ๆ และเติมตัวเร่งปฏิกิริยาร่วม RhCrOx มาทดสอบประสิทธิภาพการผลิตแก๊สไฮโดรเจนภายใต้การฉายแสงที่ตามองเห็น ในสภาวะที่มีสารเอื้อให้เกิดปฏิกิริยา TEOA พบว่า ตัวอย่าง Al-SrTiO3/g-C3N4 …

Go to article

Modification Of Natural Fibrous Materials For Sar-Cov-2 Diagnostic And Ph-Simulated Theranostic Applications, Pornchanok Punnoy Jan 2023

Modification Of Natural Fibrous Materials For Sar-Cov-2 Diagnostic And Ph-Simulated Theranostic Applications, Pornchanok Punnoy

Chulalongkorn University Theses and Dissertations (Chula ETD)

This dissertation investigates the development of colorimetric sensors utilizing natural fibrous materials modified by nanomaterials to enhance the performance of chemical sensors and theranostic devices for healthcare applications. The work is divided into two main sections. The first section, cellulose is utilized as a dual-function platform for qualitative screening of SAR-CoV-2 for COVID-19 diagnosis by colorimetric sensor and quantitative detection by mass spectrometry. The cellulose is modified with gold nanoparticles conjugated to monoclonal antibodies, enabling the specific detection of viral protein antigens through colorimetric changes resulting from nanoparticle aggregation. This platform demonstrates a detection range from 0.01 to 1 µg·mL−1 …

Go to article

Elastic Properties Of The Non-Mixing Copper Donor Assisted Material In Friction Stir Welding Of Aluminum Alloys Using Nanoindentation, M. Ojha, A. H. Al-Allaq, Y. S. Mohammed, S. N. Bhukya, Z. Wu, A. A. Elmustafa Jan 2023

Elastic Properties Of The Non-Mixing Copper Donor Assisted Material In Friction Stir Welding Of Aluminum Alloys Using Nanoindentation, M. Ojha, A. H. Al-Allaq, Y. S. Mohammed, S. N. Bhukya, Z. Wu, A. A. Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

Friction stir welding of high-strength materials such as steels is the impeded by the lack of the vast heat input needed to start the process. Contact friction is considered the most dominant source of heat generation for FSW steels which tends to cause severe wear conditions of the tool hear. To relieve the extreme wear conditions that occur on the tool heads because of FSW steels, we introduce the non-mixing Cu donor stir material to friction stir welding of aluminum alloys. The elastic properties of the Cu donor assisted friction stir welded aluminum alloys are measured using nanoindentation. The hardness …

Go to article

Developing Mesoporous Silica Nanoparticle-Based Stimuli-Responsive Nanocarriers For Delivery Of Small Molecule Therapeutics Against Colon Cancer Cells, Nisitha Lakmal Wellala Wijewantha Jan 2023

Developing Mesoporous Silica Nanoparticle-Based Stimuli-Responsive Nanocarriers For Delivery Of Small Molecule Therapeutics Against Colon Cancer Cells, Nisitha Lakmal Wellala Wijewantha

Dissertations and Theses

This dissertation delves into the innovative application of mesoporous silica nanoparticles (MSNs) for targeted drug delivery in colorectal cancer (CRC), one of the most prevalent and deadly forms of cancer worldwide. The initial focus of the research is on developing enzyme-responsive MSNs loaded with veratridine (VTD), an alkaloid derived from natural sources that demonstrates potent anticancer activity. The nanoparticles have been engineered to deliver VTD selectively to CRC cells, releasing the payload upon being exposed to specific enzymes primarily secreted by these cells. This strategy has dual advantages of amplifying the anticancer effects while minimizing potential side effects on healthy …

Go to article

Silver Doped Nanoceria (Agcnp) Integrated Silk Scaffold For Chronic Wound Healing, Architha K. Venkatesan Jan 2023

Silver Doped Nanoceria (Agcnp) Integrated Silk Scaffold For Chronic Wound Healing, Architha K. Venkatesan

Honors Undergraduate Theses

Chronic wound healing can be seriously impeded by the formation of biofilms, infections, peri-wound edema, hematoma, osteomyelitis, and the formation of reactive oxidative species (ROS). We hypothesize that a scaffold created from Silver-Doped Nanoceria (AgCNP) embedding silk can be beneficial to aid the wound healing process, inhibit inflammation and prevent microorganisms from forming a biofilm over the wound. Current wound healing methods such as intradermal injections are not advantageous to use since they can cause unwanted responses elsewhere in the body other than the wound site. Silk, however, has a positive impact on the wound healing effect and can be …

Go to article

Thermal And Electrical Properties Of Spark Plasma Sintered (Ti,Cr)B2 Ceramics, Steven M. Smith, Lun Feng, William Fahrenholtz, Gregory E. Hilmas, Laura Silvestroni Jan 2023

Thermal And Electrical Properties Of Spark Plasma Sintered (Ti,Cr)B2 Ceramics, Steven M. Smith, Lun Feng, William Fahrenholtz, Gregory E. Hilmas, Laura Silvestroni

Mathematics and Statistics Faculty Research & Creative Works

Thermal and electrical properties were measured for TiB2 ceramics containing varying CrB2 contents up to 33 mol%. The room-temperature thermal diffusivity decreased with increasing Cr content from 0.330 ± 0.003 cm2/s for pure TiB2 to 0.060 ± 0.003 cm2/s for (Ti0.66Cr0.33)B2. The amount of anisotropy in the coefficients of thermal expansion increased with increasing Cr content and the c-axis had the greatest dependence on Cr addition, with an increase of more than 25% in the thermal expansion for 33 mol% CrB2 compared to TiB2, whereas the a-axis only increased by about 8%. The electrical conductivity was the lowest for (Ti0.66Cr0.33)B2 …

Go to article

Cascaded Sapphire Fiber Bragg Gratings Inscribed By Femtosecond Laser For Molten Steel Studies, Dinesh Reddy Alla, Deva Prasad Neelakandan, Farhan Mumtaz, Rex E. Gerald, Laura Bartlett, Ronald J. O'Malley, Jeffrey D. Smith, Jie Huang Jan 2023

Cascaded Sapphire Fiber Bragg Gratings Inscribed By Femtosecond Laser For Molten Steel Studies, Dinesh Reddy Alla, Deva Prasad Neelakandan, Farhan Mumtaz, Rex E. Gerald, Laura Bartlett, Ronald J. O'Malley, Jeffrey D. Smith, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

This research reports a distributed fiber optic high-temperature sensing system tailored for applications in the steel industry and various other sectors. Recent advancements in optical sensor technology have led to the exploration of sapphire crystal fibers as a solution for sensing in harsh environments. Utilizing a femtosecond (fs) laser, cascaded fiber Bragg gratings (FBGs) were meticulously fabricated within a multimode sapphire optical fiber. These FBGs endowed the system with distributed sensing capabilities and underwent rigorous testing under extreme temperatures, reaching up to 1,800 °C. The study delves into the investigation of the FBG reflection spectrum, facilitated by the development of …

Go to article

Predicting Compressive Strength And Hydration Products Of Calcium Aluminate Cement Using Data-Driven Approach, Sai Akshay Ponduru, Taihao Han, Jie Huang, Aditya Kumar Jan 2023

Predicting Compressive Strength And Hydration Products Of Calcium Aluminate Cement Using Data-Driven Approach, Sai Akshay Ponduru, Taihao Han, Jie Huang, Aditya Kumar

Electrical and Computer Engineering Faculty Research & Creative Works

Calcium aluminate cement (CAC) has been explored as a sustainable alternative to Portland cement, the most widely used type of cement. However, the hydration reaction and mechanical properties of CAC can be influenced by various factors such as water content, Li2CO3 content, and age. Due to the complex interactions between the precursors in CAC, traditional analytical models have struggled to predict CAC binders' compressive strength and porosity accurately. To overcome this limitation, this study utilizes machine learning (ML) to predict the properties of CAC. The study begins by using thermodynamic simulations to determine the phase assemblages of …

Go to article

Drop Wetting And Sliding On Soft, Swollen Elastomers, Zhuoyun Cai Jan 2023

Drop Wetting And Sliding On Soft, Swollen Elastomers, Zhuoyun Cai

Theses and Dissertations--Chemical and Materials Engineering

Soft, slippery surfaces have gained increasing attention due to their wide range of potential applications, for example in self-cleaning, anti-fouling, liquid collection, and more. One design approach in creating slippery surfaces is using a swollen elastomer, which is a polymer network swollen with a lubricant. This type of surface may be beneficial for longer-term use than standard lubricant-infused surfaces, and provides a versatile surface with tunable mechanical properties. Hence, understanding the physics of soft surface interactions is important for fundamental soft matter physics, biomaterials, adhesives, and coatings. This research experimentally investigates wetting on soft infused networks, with the aim of …

Go to article

Effects Of Confinement On Ionic Liquids And Deep Eutectic Solvents For The Design Of Catalytic Systems, Electrochemical Devices, And Separations, Andrew Drake Jan 2023

Effects Of Confinement On Ionic Liquids And Deep Eutectic Solvents For The Design Of Catalytic Systems, Electrochemical Devices, And Separations, Andrew Drake

Theses and Dissertations--Chemical and Materials Engineering

Confinement of ionic liquids (ILs) and deep eutectic solvents (DESs) within mesoporous materials such as silica helps to control the local environment within the pores for applications such as catalysis, electrochemistry, and absorption. Silica thin films with 2.5 and 8 nm pores and micron-sized silica particles with pore diameters of 5.4 and 9 nm were synthesized to study the effect of nanoconfinement on ILs 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]), 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]), and DESs reline and ethaline (choline chloride and urea or ethylene glycol). Silica thin films with vertically aligned, well ordered, and accessible pores were synthesized via the evaporation-induced …

Go to article

Development Of Interatomic Potential Of High Entropy Diborides With Artificial Intelligence Approach To Simulate The Thermo-Mechanical Properties, Nur Aziz Octoviawan Jan 2023

Development Of Interatomic Potential Of High Entropy Diborides With Artificial Intelligence Approach To Simulate The Thermo-Mechanical Properties, Nur Aziz Octoviawan

Graduate Theses/Dissertations

The interatomic potentials designed for binary/high entropy diborides and ultra-high temperature composites (UHTC) have been developed through the implementation of deep neural network (DNN) algorithms. These algorithms employed two different approaches and corresponding codes; 1) strictly local & invariant scalar-based descriptors as implemented in the DEEPMD code and 2) equivariant tensor-based descriptors as included in the ALLEGRO code. The samples for training and validation sets of the forces, energy, and virial data were obtained from the ab-initio molecular dynamics (AIMD) simulations and Density Functional Theory (DFT) calculations, including the simulation data from the ultra-high temperature region (> 2000K). The study …

Go to article

Defect State Study And Surface Patching In Zno Nanoparticles Via Nano- Bio Interaction With Dna Bases, Ummay Honey Jan 2023

Defect State Study And Surface Patching In Zno Nanoparticles Via Nano- Bio Interaction With Dna Bases, Ummay Honey

Graduate Theses/Dissertations

First, this thesis investigates the structural and optical properties of hydrothermally synthesized ZnO nanostructures, focusing on the effects of varying annealing temperatures on their properties. Structural characterizations using micro-Raman spectroscopy, X-ray diffraction (XRD), and morphological study called scanning electronic microscopy (SEM) show changes in crystallinity and intensity with different annealing temperatures. Optoelectronic characterization using photoluminescence spectroscopy reveals changes in luminescence properties near the ultraviolet region with temperature variation and in the visible emission area region. These results provide insights into how annealing temperature can affect the surface layer of ZnO nanostructures and can be applied to improve performance in electronic …

Go to article

A Study Of Synthesis And Characterization Of Naxmno2-Δ As A Cathode Material For Sodium-Ion Battery, Zia Uddin Mahmud Jan 2023

A Study Of Synthesis And Characterization Of Naxmno2-Δ As A Cathode Material For Sodium-Ion Battery, Zia Uddin Mahmud

Graduate Theses/Dissertations

The proliferation of renewable energy sources and the promising market for net-scale battery applications immediately increases the need for electrochemical energy storage technology. Sodium (Na) components are more accessible and less expensive than lithium. Being a sodium-based material with a high-power density provided by Na-ion diffusion, NaxMnO2- δ is a strong contender for large-scale Sodium-ion-battery (SIB) applications. In the current study, NaxMnO2- δ is created using a solid-state reaction technique, and investigated structural, electrical, and electrochemical properties of materials were investigated using X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), UV-VIS spectroscopy, and …

Go to article

Synthesis, Characterization, And Application Of Chitosan Nanoparticles For In Vitro Studies On Hela Cancer Cells, Rejeena Jha Jan 2023

Synthesis, Characterization, And Application Of Chitosan Nanoparticles For In Vitro Studies On Hela Cancer Cells, Rejeena Jha

Graduate Theses/Dissertations

Chitosan is a fibrous substance that is derived from chitin, a natural substance in the shells of crustaceans. It possesses all the necessary qualities for being used as carrier for the transport of drugs and genes into tumor, such as biodegradability, biocompatibility, hydrophilicity, and non-toxicity and cationic in nature. Ionic gelation method was used to synthesize chitosan (CS) nanoparticles (NPs). Ionic gelation is a very benign process chemically that requires mixing a CS aqueous solution with a sodium tripolyphosphate (TPP) aqueous solution at room temperature. In addition, a surfactant polyethylene oxide (PEO) alone and a diblock copolymer of PEO and …

Go to article

Exploration And Synthesis Of Half-Heusler And Disordered Ternary Intermetallic Single Crystals, Md Fahel Bin Noor Jan 2023

Exploration And Synthesis Of Half-Heusler And Disordered Ternary Intermetallic Single Crystals, Md Fahel Bin Noor

Graduate Theses/Dissertations

Due to their distinct physical and chemical characteristics, half-Heusler compounds are intermetallic materials that have undergone substantial research. The general formula for these compounds is XYZ, where X and Y are transition metals and Z is a p-block element. Thermoelectricity is among the half-Heusler compounds' most exciting potential uses, but additional possible applications include spintronics, magnetic refrigeration, and superconductivity, among others. Recently, half-Heuslers (and Heuslers) have emerged as candidates for catalysts for hydrogenation. The CoNbSn half-Heusler compound, as well as another unique intermetallic ternary compound, the disordered Mn4-xCrxAl11, were successfully grown as single crystals …

Go to article

Synthesis And Characterization Of Cage-Structured Compounds As Promising Thermoelectric Materials, Nusrat Yasmin Jan 2023

Synthesis And Characterization Of Cage-Structured Compounds As Promising Thermoelectric Materials, Nusrat Yasmin

Graduate Theses/Dissertations

The development of new thermoelectric materials is of great interest due to their potential to convert waste heat into useful electricity. The primary problem is that the physical factors that are utilized to assess thermoelectric performance conflict with one another. One way to improve their performance is to hinder the lattice from conducting heat through its vibrations while maintaining the heat conduction via the electrons. This can be done by creating cage structures that allow heavy atoms to jiggle. In this study, we report the synthesis of a group of such compounds, using the self-flux method. They all belong to …

Go to article

System Analysis Of An Internal Combustion Engine (Ice) – Solid Oxide Fuel Cell (Sofc) Hybrid Cycle, Jose Javier Colon Rodriguez Jan 2023

System Analysis Of An Internal Combustion Engine (Ice) – Solid Oxide Fuel Cell (Sofc) Hybrid Cycle, Jose Javier Colon Rodriguez

Graduate Theses, Dissertations, and Problem Reports (ETD)

Due to the intermittent nature of renewable energy and the rigid operation of existing coal plants, the need for flexible power generation technology is eminent. Hybrid energy systems have shown potential for flexible, grid following dynamics while maintaining higher efficiencies. The work below focuses on the performance analysis of a proposed 100 kW pressurized Internal Combustion Engine (ICE) and Solid Oxide Fuel Cell (SOFC) hybrid system. The un-utilized fuel from the SOFC stack provided the chemical energy to operate the engine. A turbocharger was used to deliver the necessary air flow for both the stack and engine. An external reformer …

Go to article

Fem Eem Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony Robinson Dr. Jan 2023

Fem Eem Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony Robinson Dr.

Datasets

A large number of combinations of Irish wall types, insulation materials, and heating fuel types were produced to compare the multiple variables which influence Optimal Insulation Thickness values. The total cost (TC) and carbon emission (CE) at optimum insulation thickness (OIT) for all combinations of insulation material and three types of fuel are considered. The dataset presents OIT for solid wall, cavity wall and cavity block wall types located in Monaghan, Dublin, and Kerry.

Go to article

Hdd Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony James Robinson Jan 2023

Hdd Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony James Robinson

Datasets

In this study, a thermal-economic analysis was conducted to determine the optimum insulation thickness of retrofitted insulation walls in different regions in Ireland. This was based on the Heating Degree Day method (HDD). This dataset contains optimum insulation thickness, payback period, cost savings and carbon emission for all 25 counties in the Republic of Ireland

Go to article

Study Of Nanocomposite Materials Using Molecular Dynamics, Prashik Sunil Gaikwad Jan 2023

Study Of Nanocomposite Materials Using Molecular Dynamics, Prashik Sunil Gaikwad

Dissertations, Master's Theses and Master's Reports

There is an increase in demand for new lightweight structural materials in the aerospace industry for more efficient and affordable human space travel. Polymer matrix composites (PMCs) with reinforcement material as carbon nanotubes (CNTs) have shown exceptional increase in the mechanical properties. Flattened carbon nanotubes (flCNTs) are a primary component of many carbon nanotube (CNT) yarn and sheet materials, which are promising reinforcements for the next generation of ultra-strong composites for aerospace applications. These flCNT/polymer materials are subjected to extreme pressure and temperature during curing process. Therefore there is a need to investigate the evolution of properties during the curing …

Go to article

Nanomaterials For Cardiovascular Engineering, Roya Bagheri Jan 2023

Nanomaterials For Cardiovascular Engineering, Roya Bagheri

Dissertations, Master's Theses and Master's Reports

Cardiovascular diseases and disorders (i.e., those related to heart and blood vessels) are the main reasons for mortality worldwide. Nanomaterials, with their unique morphologies and properties, have a great potential for advancing cardiovascular engineering to treat diseases and disorders. In this dissertation, several cardiovascular applications of conductive nanomaterials were investigated. First, a conductive nanomaterial was explored to fabricate biohybrid nanomaterial-cardiomyocyte (CM – heart muscle cell) systems. Using Carbon Nanotube (CNT) forest as a 3D porous and conductive scaffold was investigated. The influence of the CNT forest on the viability, attachment, and spreading of CMs and their genetic information was …

Go to article

Fabrication And Optical Properties Of Two-Dimensional Transition Metal Dichalcogenides, Manpreet Boora Jan 2023

Fabrication And Optical Properties Of Two-Dimensional Transition Metal Dichalcogenides, Manpreet Boora

Dissertations, Master's Theses and Master's Reports

Two-dimensional layered materials such as graphene and transition metal dichalcogenides have gained a lot of attention because of their distinctive chemical, optical, and electronic properties. Transition metal dichalcogenides can have a tunable bandgap in the range of 1 − 3 eV (visible), which enables their applications in ultrathin field effect transistors, photovoltaics, sensors, and optoelectronic devices. They exhibit an indirect-to-direct band gap transition when thinned down from bulk to a single layer. They show strong photoluminescence, electron–photon interaction, valley pseudospin, nonlinear optical response, and lack of dangling bonds. Many exotic phenomena appear when materials are thinned to nanoscale size because …

Go to article

Molecular Dynamics Modeling Of Polymers For Aerospace Composites, Swapnil Sambhaji Bamane Jan 2023

Molecular Dynamics Modeling Of Polymers For Aerospace Composites, Swapnil Sambhaji Bamane

Dissertations, Master's Theses and Master's Reports

Polymer matrix composite materials are widely used as structural materials in aerospace and aeronautical vehicles. Resin/reinforcement wetting and the effect of polymerization on the thermo-mechanical properties of the resin are key parameters in the manufacturing of aerospace composite materials. Determining the contact angle between combinations of liquid resin and reinforcement surfaces is a common method for quantifying wettability. It is challenging to determine contact angle values experimentally of high-performance resins on CNT materials such as CNT, graphene, bundles or yarns, and BNNT surfaces. It is also experimentally difficult to determine the effect of polymerization reaction on material properties of a …

Go to article

First Prev Next Last