Engineering Commons^™

Ruco To Extend The Scalability Of Ultra-Thin Direct Plate Liners, Daniel Verne Greenslit

Legacy Theses & Dissertations (2009 - 2024)

In traditional semiconductor technology a sputtered copper seed layer is used to improve the adhesion, microstucture, and electromigration characteristics of electrochemically deposited (ECD) copper. The seed layer is deposited on top of a Ta/TaN stack. The Ta layer acts as an adhesion and nucleation layer for the copper seed and the TaN serves as a diffusion barrier for the Cu. As the line widths continue to shrink, scaling each of these layers becomes more difficult. It would be advantageous for the interconnect to be composed of as much copper as possible, transitioning from the traditional liner seed stack to a …

The Use Of Elemental Powder Mixes In Laser-Based Additive Manufacturing, Rodney Michael Clayton

Masters Theses

"This study examines the use and functionality of laser depositing alloys from mixes of elemental metallic powders. Through the use of laser-based additive manufacturing (LAM), near net-shaped 3-Dimensional metallic parts can be produced in a layer-by-layer fashion. It is customary for pre-alloyed powders to be used in this process. However, mixes of elemental powders can be used to produce alloys that are formed during the deposition process. This alternative technique requires that the elemental powders adequately mix during deposition for a homogeneous deposit to be produced. Cost savings and versatility are among several of the advantages to using elemental powder …

Fabrication Of Two-Dimensional Nanostructures On Glass Using Nanosphere Lithography, Elmer Jim Wang

Wayne State University Theses

It is desired to have artificial optical materials with controllable optical properties. Optical glass is the most common optical material for various applications. This research will attempt to create a thin layer on the substrate with controllable optical properties. The thin layer is a composite material with nanoscale features and controllable refractive index. Two-dimensional (2D) nanostructures will be created on the surface of optical glass using nanosphere lithography. In comparison with conventional techniques, this approach is more efficient and cost-effective for the creation of large areas of thin surface layers as an artificial material. A uniform monolayer of nanospheres will …

Universal Emergence Of Spatially Modulated Structures Induced By Flexoantiferrodistortive Coupling In Multiferroics, Eugene A. Eliseev, Sergei V. Kalinin, Yijia Gu, Maya D. Glinchuk, Victoria V. Khist, For Full List Of Authors, See Publisher's Website.

Materials Science and Engineering Faculty Research & Creative Works

We proved the existence of a universal flexoantiferrodistortive coupling as a necessary complement to the well-known flexoelectric coupling. The coupling is universal for all antiferrodistortive systems and can lead to the formation of incommensurate, spatially modulated phases in multiferroics. Our analysis can provide a self-consistent mesoscopic explanation for a broad range of modulated domain structures observed experimentally in multiferroics.

Infrared Optical Properties Of Amorphous And Nanocrystalline Ta2o5 Thin Films, Trevor J. Bright, J. I. Watjen, Zhuomin Zhang, Christopher Muratore, Andrey A. Voevodin, D. I. Koukis, David B. Tanner, Daniel J. Arenas

Chemical and Materials Engineering Faculty Publications

The optical constants of tantalum pentoxide (Ta 2O5) are determined in a broad spectral region from the visible to the far infrared. Ta 2O5 films of various thicknesses from approximately 170 to 1600 nm aredeposited using reactive magnetron sputtering on Si substrates. X-ray diffraction shows that the as-deposited films are amorphous, and annealing in air at 800 °C results in the formation of nanocrystallineTa 2O5. Ellipsometry is used to obtain the dispersion in the visible and near-infrared. Two Fourier-transform infrared spectrometers are used to measure the transmittance and reflectance at wavelengths from 1 to 1000 μm. The surface topography and …

Cross-Plane Thermal Properties Of Transition Metal Dichalcogenides, Christopher Muratore, Vikas Varshney, Jaime J. Gengler, Jianjun Hu, John E. Bultman, Timothy M. Smith, Patrick J. Shamberger, Bo Qiu, Xiulin Ruan, Ajit K. Roy, Andrey A. Voevodin

Chemical and Materials Engineering Faculty Publications

In this work, we explore the thermal properties of hexagonal transition metal dichalcogenide compounds with different average atomic masses but equivalent microstructures. Thermal conductivity values of sputtered thin films were compared to bulk crystals. The comparison revealed a >10 fold reduction in thin film thermal conductivity. Structural analysis of the films revealed a turbostratic structure with domain sizes on the order of 5–10 nm. Estimates of phonon scattering lengths at domain boundaries based on computationally derived group velocities were consistent with the observed film microstructure, and accounted for the reduction in thermal conductivity compared to values for bulk crystals.

Tannic Acid Coated Gold Nanorods Demonstrate A Distinctive Form Of Endosomal Uptake And Unique Distribution Within Cells, Emily A. Untener, Kristen K. Comfort, Elizabeth I. Maurer, Christin M. Grabinski, Donald A. Comfort, Saber M. Hussain

Chemical and Materials Engineering Faculty Publications

One of the primary challenges associated with nanoparticle-dependent biological applications is that endosomal entrapment in a physiological environment severely limits the desired targeting and functionality of the nanoconstructs. This study sought to overcome that challenge through a systematic approach of gold nanorod (GNR) functionalization: evaluating the influence of both aspect ratio and surface chemistry on targeted cellular internalization rates and preservation of particle integrity. Owing to their unique spectral properties and enhanced surface area, GNRs possess great potential for the advancement of nanobased delivery and imaging applications. However, their ability for efficient intracellular delivery while maintaining their specific physiochemical parameters …

Microstructure And Mechanical Properties Of Titanium Nitride Optical Coatings Made By Dc Magnetron Sputtering, Gustavo Martinez

Open Access Theses & Dissertations

Titanium nitride (TiNx) thin films were grown by DC (Direct Current) magnetron sputtering method onto Si(100) substrates by varying time of deposition to produce films with variable thickness (dTiN) in the range of 20-120 nm. The grown TiNx films were characterized by studying their structure, composition, and mechanical properties. Nuclear reaction analysis (NRA) combined with Rutherford backscattering spectrometry (RBS) analyses indicate that the grown films were stoichiometric TiN. Grazing incidence X-ray diffraction (GIXRD) measurements indicate that the texturing of the TiN films changes as a function of dTiN. The (111) and (002) peaks appear initially; with increasing dTiN, (111) becomes …

Effect Of Vortex Hotspots On The Radio-Frequency Surface Resistance Of Superconductors, A. Gurevich, G. Ciovati

Physics Faculty Publications

We present detailed experimental and theoretical investigations of hotspots produced by trapped vortex bundles and their effect on the radio-frequency (rf) surface resistance Rs of superconductors at low temperatures. Our measurements of Rs, combined with the temperature mapping and laser scanning of a 2.36-mm-thick Nb plate incorporated into a 3.3-GHz Nb resonator cavity cooled by the superfluid He at 2 K, revealed spatial scales and temperature distributions of hotspots and showed that they can be moved or split by thermal gradients produced by the scanning laser beam. These results, along with the observed hysteretic field dependence of Rs which can …

Copper Indium Diselenide Nanowire Arrays In Alumina Membranes Deposited On Molybdenum And Other Back Contact Substrates, Bhavananda R. Nadimpally

Theses and Dissertations--Electrical and Computer Engineering

Heterojunctions of CuInSe₂ (CIS) nanowires with cadmium sulfide (CdS) were fabricated demonstrating for the first time, vertically aligned nanowires of CIS in the conventional Mo/CIS/CdS stack. These devices were studied for their material and electrical characteristics to provide a better understanding of the transport phenomena governing the operation of heterojunctions involving CIS nanowires. Removal of several key bottlenecks was crucial in achieving this. For example, it was found that to fabricate alumina membranes on molybdenum substrates, a thin interlayer of tungsten had to be inserted. A qualitative model was proposed to explain the difficulty in fabricating anodized aluminum oxide …

Novel Nanostructures And Processes For Enhanced Catalysis Of Composite Solid Propellants, Robert Draper

Electronic Theses and Dissertations

The purpose of this study is to examine the burning behaviour of composite solid propellants (CSP) in the presence of nanoscale, heterogenous catalysts. The study targets the decomposition of ammonium perchlorate (AP) as a key component in the burning profile of these propellants, and seeks to identify parameters of AP decomposition reaction that can be affected by catalytic additives. The decomposition behavior of AP was studied in the presence of titanium dioxide nanoparticles in varying configurations, surface conditions, dopants, morphology, and synthesis parameters with the AP crystals. The catalytic nanoparticles were found to enhance the decomposition rate of the ammonium …

Scandia And Ceria Stabilized Zirconia Based Electrolytes And Anodes For Intermediate Temperature Solid Oxide Fuel Cells: Manufacturing And Properties, Yan Chen

Electronic Theses and Dissertations

Mesoscale optical phenomena occur when light interacts with a number of different types of materials, such as biological and chemical systems and fabricated nanostructures. As a framework, mesoscale optics unifies the interpretations of the interaction of light with complex media when the outcome depends significantly upon the scale of the interaction. Most importantly, it guides the process of designing an optical sensing technique by focusing on the nature and amount of information that can be extracted from a measurement. Different aspects of mesoscale optics are addressed in this dissertation which led to the solution of a number of problems in …

Design, Fatigue, And Strength Analysis Of A Tie Rod Hydraulic Cylinder Bolt, Jacob Roemen, Donald Webber

The Journal of Undergraduate Research

This report illustrates strength and fatigue analysis completed on a tie rod hydraulic cylinder bolt from a Lion TX 2500 tie rod hydraulic cylinder. The goal was to: solve for total clamping force, damping force per bolt at 90% proof load strength, amount of force per bolt, find the required number of bolts to hold the hydraulic cylinder together, solve for bolt spacing requirements, estimate a safety factor based on proof load strength, nut shear strength, required nut thickness, the least number of threads that must be engaged, estimate R.R. Moore Bending Fatigue Strengths, estimate the maximum value of P …

A Three-Dimensional Quantitative Understanding Of Short Fatigue Crack Growth In High Strength Aluminum Alloys, Wei Wen

Theses and Dissertations--Chemical and Materials Engineering

The behaviors of short fatigue crack (SFC) propagation through grain boundaries (GBs) were monitored during high cycle fatigue in an Al-Li alloy AA8090. The growth behaviors of SFCs were found to be mainly controlled by the twist components (α) of crack plane deflection across each of up to first 20 GBs along the crack path. The crack plane twist at the GB can result in a resistance against SFC growth; therefore SFC propagation preferred to follow a path with minimum α at each GB. In addition to the grain orientation, the tilting of GB could also affect α.

An experiment …

Numerical Modeling And Characterization Of Vertically Aligned Carbon Nanotube Arrays, Johnson Joseph

Theses and Dissertations--Mechanical and Aerospace Engineering

Since their discoveries, carbon nanotubes have been widely studied, but mostly in the forms of 1D individual carbon nanotube (CNT). From practical application point of view, it is highly desirable to produce carbon nanotubes in large scales. This has resulted in a new class of carbon nanotube material, called the vertically aligned carbon nanotube arrays (VA-CNTs). To date, our ability to design and model this complex material is still limited. The classical molecular mechanics methods used to model individual CNTs are not applicable to the modeling of VA-CNT structures due to the significant computational efforts required. This research is to …

The Study Of Photo-Reduction Of Cerium Oxide Nanoparticles In Presence Of Dextran: An Attempt In Understanding The Functionality Of The System, Swetha Barkam

Electronic Theses and Dissertations

Malignant melanoma cancer is the sixth common cancer diagnosed in the United States. Surgery, chemotherapy and radiation are some of the successful techniques in killing tumor cells. However, in these techniques, it is not easy to distinguish tumor cells from the healthy once which inadvertently get exposed to chemical agent/radiation. Therefore it is required to develop an anticancer agent which selectively kills the cancer cells, while still protecting the normal tissues. In our preliminary work, we have shown that Dextran (1000Da) coated Cerium oxide nanoparticles (Dex-CNPs) selectively kills the cancer cells (50% killing at a concentration of 150μM) without inducing …

Tailoring The Properties Of Polyelectrolyte Coated Cerium Oxide Nanoparticles As A Function Of Molecular Weight, Shashank Saraf

Electronic Theses and Dissertations

The application of Cerium oxide nanoparticles (CNPs) for therapeutic purposes requires a stable dispersion of nanoparticles in biological environment. The objective of this study is to tailor the properties of polyelectrolyte coated CNPs as a function of molecular weight to achieve a stable and catalytic active dispersion. This was achieved by coating CNPs with polyacrylic acid (PAA) which increased the dispersion stability of CNPs and enhanced the catalytic ability. The stability of PAA coating was analysed using the change in the Gibbs free energy computed by Langmuir adsorption model. The adsorption isotherms were determined using soft particle electrokinetics which overcomes …

First Principle Studies Of Cu-Carbon Nanotube Hybrid Structures With Emphasis On The Electronic Structures And The Transport Properties, Chengyu Yang

Electronic Theses and Dissertations

Carbon nanotubes have been regarded as ideal building blocks for nanoelectronics and multifunctional nanocomposites due to their exceptional strength, stiffness, flexibility, as well as their excellent electrical properties. However, carbon nanotube itself has limitations to fulfill the practical application needs: 1) an individual carbon nanotube has a low density of states at the Fermi level, and thus its conductivity is only comparable to moderate metals but lower than that of copper. 2) Metallic and semiconducting nanotubes are inherently mixed together from the synthesis, and the selection/separation is very difficult with very low efficiency. 3) Carbon nanotubes alone cannot be used …

Interdiffusion Reaction Between Uranium-Zirconium And Iron, Young Joo Park

Electronic Theses and Dissertations

U-Zr metallic fuels cladded in Fe-alloys are being considered for application in an advanced Sodium-Cooled Fast Reactor (SFR) that can recycle the U-Zr fuels and minimize the long-lived actinide waste. To understand the complex fuel-cladding chemical interaction of the U-Zr metallic fuel with Fe-alloys, a systematic multicomponent diffusion study was carried out using solid-to-solid diffusion couples. The U-10 wt.% Zr vs. pure Fe diffusion couples were assembled and annealed at temperatures, 630, 650 and 680°C for 96 hours. Development of microstructure, phase constituents, and compositions developed during the thermal anneals were examined by scanning electron microscopy, transmission electron microscopy and …

High Volume Fraction Mg-Based Nanocomposites: Processing, Microstructure And Mechanical Behavior, Jinling Liu

Electronic Theses and Dissertations

Mg-based metal matrix nanocomposites (MMNCs) with mechanical properties, superior to those of coarse-grained composites, are promising structural materials for applications in the automotive and aerospace industries. The research in this area was primarily focused earlier on either micro-scaled reinforcements or nano-scaled reinforcements with very low volume fractions. MMNCs with high volume fractions have not been explored yet. In this research, we study the processing, microstructures and properties of MMNCs containing ceramic nanoparticles up to 30 vol.%. We first investigated the mechanical alloying of Al2O3 nanoparticles and pure Mg under high-energy ball milling conditions. The phase evolution and their distribution were …

Corrosion Behaviour Of Aisi 304 Stainless Steel In Contact With Eutectic Salt For Concentrated Solar Power Plant Applications, Omar Ahmed

Electronic Theses and Dissertations

In response to the extensive energy demands on national and global levels, concentrated solar power (CSP) plants are designed to harness and convert solar energy to electricity. For such green energy application, robust, reliable and durable materials for CSP constructions are required. The corrosion resistance is among many parameters to consider in these thermalelectrical stations such as for pipes and storage tanks in CSP. In this investigation, the corrosion behavior of AISI 304 stainless steel (18 wt. % Cr, 8 wt. % Ni) with the heat transfer fluid, also known as solar salt, has been examined. The ternary eutectic salt …

Interdiffusion And Impurity Diffusion In Magnesium Solid Solutions, Catherine Kammerer

Electronic Theses and Dissertations

Magnesium, being lightweight, offers potential to be developed into extensive structural applications. The transportation segment has particular interest in Mg and Mg alloy for applications where reduced vehicle weight is proportional to increased fuel efficiency. Aluminum and zinc are two of the most common alloying elements in commercial Mg alloys. They improve the physical properties of Mg through solid solution strengthening and precipitation hardening. Diffusion plays a key role in the kinetics of and microstructural development during solidification and heat treatment. However, there is limited diffusion data available for Mg and Mg alloys. In particular, because Al is monoisotopic, tracer …

Development Of Nitrogen Concentration During Cryomilling Of Aluminum Composites, Clara Hofmeister

Electronic Theses and Dissertations

The ideal properties of a structural material are light weight with extensive strength and ductility. A composite with high strength and tailorable ductility was developed consisting of nanocrystalline AA5083, boron carbide and coarser grained AA5083. The microstructure was determined through optical microscopy and transmission electron microscopy. A technique was developed to determine the nitrogen concentration of an AA5083 composite from secondary ion mass spectrometry utilizing a nitrogen ionimplanted standard. Aluminum nitride and amorphous nitrogen-rich dispersoids were found in the nanocrystalline aluminum grain boundaries. Nitrogen concentration increased as a function of cryomilling time up to 72hours. A greater nitrogen concentration resulted …

Nano-Morphology Of Polymer Bulk Herojunctions Studied By Time-Resolved Synchrotron X-Ray Scattering, Soo Kim

Material Science and Engineering Dissertations - Archive

This study investigates the phase transformation of an active layer in organic photovoltaics (OPV) during film deposition and post thermal treatment as well as effects of phase transformation on OPV performance. For this purpose, small - and wide angle X-ray scattering technique (SAXS and WAXS) was applied to examine the phase separation mechanism at relevant fabrication condition of the highest OPV device performance. The poly(3-alkylthiophene)/[6,6]-phenyl-C61 butyric acid methylester (P3AT/PCBM) blend sample was employed in order to study phase transformation of the active layer systemically.Our exploration with SAXS and WAXS technique found that the polarity of the substrate, a solubility, and …

Fabrication And Characterization Of Barium Titanate Thin Film On Polycrystalline Nickel Substrate, Parisa Sahebi

Material Science and Engineering Theses - Archive

Ferroelectric BaTiO₃(BTO) thin films were deposited on polycrystalline nickel disks and silicon wafer substrates by rf magnetron sputtering. Nickel oxide (NiO) and nanocrystalline nickel (nc-Ni) layers were used as interfacial buffer layers. Microstructural studies with X-ray diffraction and transmission electron microscopy reveal that the BTO films deposited at temperatures lower than 700℃ have an amorphous structure. However, the BTO films sputtered at temperatures higher than 700℃ are partially crystalline. BTO films have a good and continuous interface with both interfacial layers with no interdiffusion or reaction with the substrates. In the case of BTO deposition with nc-Ni interlayer at higher …

Processing And Properties Of Zrb₂-Zrsi₂ Matrix Composites Reinforced With Continuous Sic Fiber, Benjamin John Bowin Lai

Masters Theses

"The research presented in this thesis focuses on the processing, microstructure, and mechanical properties of ZrB₂-based composites. The main goal was to develop a process that incorporates high strength continuous SiC fiber in a ZrB₂-based matrix. In order to achieve this, the densification, microstructure, and mechanical properties of ZrB₂-ZrSi₂ monolithic ceramics were characterized along with various SiC fiber reinforced ceramic matrix composites (CMCs) utilizing the same matrix.

There were two main areas of study in this thesis. The initial study demonstrated that additions of ZrSi₂ into a ZrB₂ ceramic increases densification at significantly reduced processing temperatures ≤1600ºC). This study revealed …

Mse Annual Report 2013, Department Of Materials Science And Engineering, Michigan Technological University

Department of Materials Science and Engineering Annual Reports

Table of Contents

• Paul Sanders, Project-Oriented Learning
• A New Way to Prevent Deadly Infections
• 3D Printers for Peace and Progress
• Faculty and Staff News
• Graduate Student Update
• Outreach
• Undergraduate Student News
• Alumni at a Glance

Faulted Structures In Li Ion Exchanged Namo2 (M=Ni(0.25)Mn(0.75)), Aaron M. Dewahl

Dissertations, Master's Theses and Master's Reports - Open

A family of LiMO2 materials (M=Ni_0.25Mn_0.75) was prepared from Na_1.2-xLi_xMO_∂ precursors (0≤x≤0.6) via ion exchange. The resulting IE products were examined via XRD and compared to simulated XRD patterns produced using DIFFax to determine the defect structures resulting from the IE process. For the 0.1≤x≤0.6 materials, it is observed that there are 3 LiMO₂ sub-phases with different Li contents present. As the amount of Li in the precursor increases, the amount of each phase changes resulting in a net shift to higher 2-theta; corresponding to an overall decrease in lattice …

An Investigation Of Waste Glass-Based Geopolymers Supplemented With Alumina, Mary U. Christiansen

Dissertations, Master's Theses and Master's Reports - Open

An increased consideration of sustainability throughout society has resulted in a surge of research investigating sustainable alternatives to existing construction materials. A new binder system, called a geopolymer, is being investigated to supplement ordinary portland cement (OPC) concrete, which has come under scrutiny because of the CO2 emissions inherent in its production.

Geopolymers are produced from the alkali activation of a powdered aluminosilicate source by an alkaline solution, which results in a dense three-dimensional matrix of tetrahedrally linked aluminosilicates. Geopolymers have shown great potential as a building construction material, offering similar mechanical and durability properties to OPC. Additionally, geopolymers have …

Molecular Modeling Of Pmr-15 Polyimide, Fnu Pruthul Kokkada Ravindranath

Dissertations, Master's Theses and Master's Reports - Open

PMR-15 polyimide is a polymer that is used as a matrix in composites. These composites with PMR-15 matrices are called advanced polymer matrix composite that is abundantly used in the aerospace and electronics industries because of its high temperature resistivity. Apart from having high temperature sustainability, PMR-15 composites also display good thermal-oxidative stability, mechanical properties, processability and low costs, which makes it a suitable material for manufacturing aircraft structures. PMR-15 uses the reverse Diels-Alder (RDA) method for crosslinking which provides it with the groundwork for its distinctive thermal stability and a range of 280-300 degree Centigrade use temperature. Regardless of …