Engineering Commons^™

High Temperature Heat Exchanger Project: Quarterly Progress Report April 1, 2007 Through June 30, 2007, Anthony Hechanova

Publications (NSTD)

• Ceramatec Sulfuric Acid Decomposer. Modeling with different reacting flow channel configurations (ribbed-surface channels, hexagonal channels, and diamond-shaped channels) was performed. The probability of failure for the one channel geometry with different reacting flow channel configurations was calculated to be zero in the three principal directions for all of the cases.

• Bayonet Heat Exchanger. The Matlab code for calculating the probability of failure using a two-dimensional axisymmetric model of the bayonet decomposer was developed. The probability of failure was calculated for the inner and outer SiC walls, and the intermediate quartz wall of the decomposer and found to be …

Sheep Updates 2007 - Part 4, Dean Thomas, Dominique Blache, Dean Revell, Hayley Norman, Phil Vercoe, Zoey Durmic, Serina Digby, Di Mayberry, Megan Chadwick, Martin Sillence, David Masters, R. Silberstein, F. Byrne, P. G. H. Nichols, J. Young, L. Aitkins, M. G. Wilmot, A. J. Rintoul, T. Lambert, D. R. Mcclements, P. Raper, P. Ward, C. Walton, T. York, David Pethick, David Hopkins, Malcolm Mcphee, D. B. Savage, J. V. Nolan, I. R. Godwin, A. Aoetpah, T. Nguyen, N. Baillie, C. Lawler, Ken Geenty, John Smith, Darryl Smith, Tim Dyall, Grant Uphill, John Young, Michael Paton, John Dorrian

Sheep Updates

This session covers eight papers from different authors:

GRAZING

1. The impact of high dietary salt and its implications for the management of livestock grazing saline land, Dean Thomas, Dominique Blache, Dean Revell, Hayley Norman, Phil Vercoe, Zoey Durmic, Serina Digby, Di Mayberry, Megan Chadwick, Martin Sillence and David Masters, CRC for Plant-based Management of Dryland Salinity, Faculty of Natural & Agricultural Sciences, The University of Western Australia, WA.

2. Sustainable Grazing on Saline Lands - outcomes from the WA1 research project, H.C. Norman^1,2, D.G. Masters^1,2, R. Silberstein^1,2, F. Byrne^2,3, P.G.H. Nichols …

College Of Engineering Senior Design Competition Spring 2007, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

Nevada Risk Assessment/Management Program (Nramp) – Phase 2: Quarterly Progress Report January 1, 2007 Through March 31, 2007, Klaus J. Stetzenbach

Nevada Risk Assessment/Management Program

Work conducted in this second quarter consisted of continuing the detailed data and information acquisition; review of the received document contents, and interpretation of significance in light of previous DOE documents. This included telephone and in-person discussions with DOE NVO personnel at the March Waste Management Symposia in Tucson. As a result of these discussions and review of the supporting data and methodologies, a more specific listing of activities was developed, and DOE provided a confirmatory note to HRC in March.

Much of the review of the received information does indicate significant changes in data, methodologies, and baseline assumptions over …

High Temperature Heat Exchanger Project: Quarterly Progress Report January 1, 2007 Through March 31, 2007, Anthony Hechanova

Publications (NSTD)

• The variation of sulfur dioxide production (throughput) of the baseline design of the Ceramatec sulfuric acid decomposer with total mass flow rate of reacting flow has been calculated. According to the calculations, the sulfur dioxide production increases as the total mass flow rate of reacting flow increases regardless of the fact that decomposition percentage of sulfuric trioxide decreases. A parametric study of the baseline design of the Ceramatec sulfuric acid decomposer was performed.

• The thermal performance using various channel geometries for the decomposer was studied. The baseline design (straight channels) has 89.5% thermal efficiency while the thermal efficiency …

Cuando Viene El Agua: Percepciones De Los Impactos Sociales Del Proyecto Hidroeléctrico “Chan-75” En Las Comunidades Ubicadas En La Cuenca Del Río Changuinola, Bocas Del Toro, Jeffery D. Stein

Independent Study Project (ISP) Collection

This report analyzes the anticipated social impacts of a hydroelectric project, titled “Chan-75,” in the surrounding communities. The project is located in the Bosque Protector de Palo Seco (BPPS) protected area along the Changuinola River. The flooding of 750 ha to create a reservoir for the dam will require the resettlement of roughly 1,000 residents of at least four indigenous Ngöbe Buglé communities including Valle del Rey, Charco la Pava, Changuinola Arriba, and Guayabal, in addition to the submersion of thousands of ha of farmland belonging to residents of nearby communities (Cordero et al). Once completed, the dam will generate …

Potentiality Of Biogas And The Role Of Substrates In Biogas Formation Potential, Scott Shealy

Independent Study Project (ISP) Collection

Biogas infrastructure development, particularly in countries such as Vietnam, has the potential to provide great benefits to people living agrarian lifestyles in rural areas. Decentralized wastewater treatment facilities that utilize anaerobic technologies to digest organic waste for the purpose of collecting methane provide a number of benefits to centralized use as well. In both cases, users benefit from the production of methane gas, wastewater treatment, nutrient recycling, and organic fertilizers. In the case of decentralized use, as is most prevalent in Vietnam, integrated farming methods, such as the VACB model, allow farmers to reap the benefits of a wide array …

Predicting The Impacts Of Serra Leste: A Case Study In Companhia Vale Do Rio Doce’S Influence On Southern Pará, Jason Hayes

Independent Study Project (ISP) Collection

This project analyzes the possible environmental and socioeconomic impacts of Serra Leste, a newly proposed iron mine by the Companhia Vale do Rio Doce (CVRD). However, Serra Leste is also part of a much larger system of CVRD projects which has recently had a profound influence on the micro-region surrounding Curionópolis, the future cite of the operation. Interviews, CVRD studies, and secondary sources were used and contrasted to evaluate the situation from several angles. Environmentally, Serra Leste will have profound impacts on the water, air, and soil. Specifically, the mine will probably have the largest influence on regional water tables, …

Development Of A Screening Model For Design And Costing Of An Innovative Tailored Granular Activated Carbon Technology To Treat Perchlorate-Contaminated Water, William C. Powell

Theses and Dissertations

Perchlorate contamination of drinking water is a problem that has recently gained national attention. The purpose of this research was to develop a tool to predict the cost and performance of tailored granular activated carbon (T-GAC), an innovative technology to treat perchlorate-contaminated water. The ability to predict cost and performance is essential to promote transfer and commercialization of innovative technologies. This study investigated how data obtained from small-scale laboratory tests could be applied to predict cost and performance of a full-scale T-GAC system to treat perchlorate-contaminated water. A technology model was developed using GAC design principles and using a multi-component …

The Effects Of Orthophosphate As A Copper Corrosion Control Inhibitor In High Alkalinity Drinking Water Systems, Stephen Grace

Theses and Dissertations

The purpose of this research was to investigate orthophosphate as a corrosion inhibitor for copper pipe in a high-alkalinity drinking water system. Specifically, this thesis sought to answer three research questions regarding the impact of orthophosphate treatment, the nature of the mechanism by which orthophosphate controls copper corrosion, and the value of equilibrium modeling in predicting orthophosphate’s effects. The research questions were answered through a comprehensive literature review and experimental methodology integrating laboratory jar tests, water sampling and analysis from a field investigation, qualitative solids analysis, and equilibrium model application. This study analyzed field data obtained over the course of …

Characterization Of Chlorinated Ethene Degradation In A Vertical Flow Constructed Wetland, James M. Waldron

Theses and Dissertations

Chlorinated solvents, including perchloroethene (PCE) and trichlorethene (TCE), are among the most common groundwater contaminants found in the United States. Once released into the environment, chlorinated solvents are extremely persistent and often require costly and lengthy remedial actions. The use of constructed wetlands has shown promise as an effective and less costly alternative for the treatment of chlorinated solvent contaminated groundwater. This study characterized and evaluated the concentration of chlorinated ethenes within a vertical flow constructed wetland, fed with PCE contaminated groundwater, at Wright-Patterson Air Force Base (WPAFB), Ohio. Chlorinated ethene concentrations were characterized within three distinct layers of the …

Using Value-Focused Thinking To Evaluate The Use Of Innovative Stormwater Management Technologies On Air Force Installations, Jeffrey T. Falcone

Theses and Dissertations

Stormwater runoff occurs naturally after every storm event; however, traditional development practices have created many impervious surfaces, such as buildings, parking lots, and streets that increase runoff volume and flow rate. Conventional stormwater management practices focus on collecting runoff into centralized channels and conveying it as quickly as possible to local bodies of water. This type of conveyance system decreases the opportunity for stormwater to naturally infiltrate back into the ground. It also prevents contaminants from being naturally filtered out of stormwater flows. As a result, centralized conveyance systems can cause flooding, erosion, and terrestrial and aquatic habitat degradation. Innovative …

Lake Whatcom Model Calibration With Variable Stoichiometry In Sediments - Revised, Chris Berger, Scott A. Wells

Civil and Environmental Engineering Faculty Publications and Presentations

This memorandum discusses model calibration and enhancements made to the Lake Whatcom water quality model. Model development and initial calibration were documented in the report “Lake Whatcom Water Quality Model” (Berger and Wells, 2005). The Lake Whatcom water quality model has been converted from CE-QUAL-W2 version 3.2 to version 3.5 (Cole and Wells, 2006).

Nevada Risk Assessment/Management Program (Nramp) – Phase 2: Quarterly Progress Report, Oct. 1, 2006- Dec. 31, 2006, Klaus J. Stetzenbach

Nevada Risk Assessment/Management Program

Work conducted in this initial period consisted of work start-up (technical, administrative, contractual), and interviewing/site visits with DOE NVO staff (and support contractors) and HRC staff to quickly ascertain current technical activities and priorities as related to the scope of this task.

Since much of the technical work scope builds on previous technical work, it was considered critical to determine the changes (programmatic, technical, and regulatory) that have occurred over the past several years that directly relate to the scope. It was also equally important to determine the technical and programmatic priorities that have been established in the interim.

High Temperature Heat Exchanger Project: Quarterly Progress Report October 1, 2006 Through December 31, 2006, Anthony Hechanova

Publications (NSTD)

Modifications to the single-channel models of the Ceramatec heat exchanger and decomposer concept for hexagonal flow channels under two values of layer-overlapping (50% and 100%) and for diamond-shaped flow channels were completed.

The finite element calculations of the “Ball on Three Ball Test” for ceramic material for the purpose of selecting the appropriate specimen thickness for future experimental testing was performed for plate thicknesses ranging from 2 to 8 mm.

A finite element model of the “Ball on Three Ball Test” was also studied for discs having micro-channels.

Selected Lid Projects In New England, New England Environmental Finance Center

Planning

Examples of low impact development (LID) projects in each state in New England.

Anaerobic Digestion: Decision Support Software, Marco Poliafico

Theses

Ireland has significant quantities of livestock; meat exportation is a vibrant sector of the economy. Environmental management of animal wastes has therefore become an important concern. On the other hand in the last decade, national and EU policy debate has highlighted the need to investigate alternative energy: in particular energy for transport.

This study investigates the quantities of animal wastes produced in Ireland and their potential treatment using Anaerobic Digestion technologies. In 2005 Ireland had over 8 millions animals (cattle and pigs) and the annual slaughter accounted for over 4.2 million of these creatures. These animals have been responsible for …

Dissolution, Reactor, And Environmental Behavior Of Zro2-Mgo Inert Fuel Matrix, Kenneth Czerwinski

Fuels Campaign (TRP)

This project will examine inert fuels containing ZrO₂ and MgO as the inert matrix. Ceramics with this inert matrix, Ce, U and eventually Pu will be synthesized and examined. While the Advanced Fuel Cycle Initiative focus is on inert fuels with Pu as the fissile component, this task will perform initial laboratory experiments with Ce and U. The initial work with Ce will be performed early in the project with results used as a basis for U studies. Reactor physics calculations will be used to examine suitable quantities of burnable poisons from the candidate elements Gd, Er, or Hf. …

Economic Analysis Of Cellulase Production Methods For Bio-Ethanol, Jun Zhuang, Mary A. Marchant, Sue E. Nokes, Herbert J. Strobel

Biosystems and Agricultural Engineering Faculty Publications

The cost of cellulase enzymes has limited the feasibility of producing ethanol from fibrous biomass. Traditional submerged fermentation (SmF) was compared to an alternative method of producing cellulase, solid state cultivation (SSC). Results from an economic analysis indicated that the unit costs for cellulase enzyme production were $15.67 (The prices are all 2004 prices in this article, except otherwise stated. We deflated newer prices to 2004 prices using a deflation factor 0.9 per year and inflated older prices to 2004 prices using an inflation factor 1.1.) per kilogram ($/kg) and $40.36/kg, for the SSC and SmF methods, respectively, while the …

The Potential For Ch4-Enriched Biogas As A Transport Fuel In Ireland, Niamh Power

Theses

Ireland needs a biofuel industry- to aid compliance with the Kyoto Protocol, the Biofuels Directive and to secure its energ>' supply. The overall aim of this work is to assess the potential of CH4-enriched biogas as a transport fuel in Ireland. Biogas is produced during the anaerobic digestion of biomass. This work investigates biogas production from two different feedstocks; biodegradable municipal waste and agricultural crops. To assess the potential for biogas as a transport fuel the alternatives to biogas are investigated and compared. Thus digestion and composting of biodegradable municipal waste, and biogas and ethanol production from agricultural crops …

Interaction Between Metal Fission Products And Triso Coating Materials, Clemens Heske

Fuels Campaign (TRP)

This project focuses on the chemical bonding and interface formation of metal fission products with the coating materials used in tri-isotropic (TRISO) fuel particles for gas-cooled reactors. By combining surface- and bulk-sensitive spectroscopic methods, intermediate chemical phases at the interface, intermixing/ diffusion behavior, and the electronic interface structure as a function of material (metal and coating materials) and temperature are examined.

In the past year, emphasis was placed on a detailed analysis and description of the Cs/SiC interface formation process.

Multi-Phase Flow Analysis In Oil And Gas Engineering Systems And Its Modelling, Orlando F. Ayala, Luis F. Ayala, Orlando M. Ayala

Engineering Technology Faculty Publications

[Introduction] Two-phase flow is very common in industrial processes and its applications were already in use in ages as remote as the era of Archimedes. At the present time, many industrial processes rely on multi-phase phenomena for the transport of energy and mass or for material processing. During the last century, the nuclear, chemical and petroleum industries propelled intense research activity in the area. Their efforts have been aimed at the demystification of the mechanisms taking place during this complex flow situation.

Decoupling And Disturbance Rejection Control For Target Circulation, Jian Ma, Joon S. Lee, Woosoon Yim

Reactor Campaign (TRP)

In 1998, the Institute of Physics and Power Engineering (IPPE) and Experimental and Development Organization “Gidropress” in Russia, began the design and construction of a prototype lead-bismuth eutectic (LBE) accelerator target, the Target Complex 1 (TC-1), under the International Science and Technology Center (ISTC) project #559 (“Pilot Flow Lead-Bismuth Target of 1 MW Power for Accelerator Driven Systems”) in support of the international efforts to develop accelerator-driven spallation systems for nuclear transmutation and other applications.

During the thermal and engineering test of the TC-1 in 2005 at UNLV, it was observed that the existing control algorithm led to a very …

Modeling And Design Algorithms For Electromagnetic Pumps, Daniel P. Cook

Reactor Campaign (TRP)

Electromagnetic (EM) induction pumps are used in a number of nuclear energy related applications, such as circulation of molten lead-bismuth eutectic alloys in neutron targets, and circulation of liquid sodium metal in Gen IV Sodium-cooled Fast Reactors (SFR). Because EM pumps have no moving parts which can fail, they are considerably more reliable than conventional mechanical pumps for molten metal usage, and thus EM pumps are favored over mechanical pumps even though their pumping efficiency is lower and their initial cost is higher when compared to mechanical pumps of similar flow rates.

The research objectives of this task are:

• A …

Thermal Transient Flow Rate Sensor For High Temperature Liquid Metal Cooled Nuclear Reactor, Yingtao Jiang

Reactor Campaign (TRP)

In nuclear power plants and accelerator driven system (ADS) for nuclear waste treatment, it is important to monitor the coolant flow rate in the reactor core and pipe-line. In such a strong irradiation, high pressure and temperature environment, no accurate local flow measurement technique is readily available. Electromagnetic (EM) flow meter is popular in low temperature application as it is a non-intrusive technology. However, additional voltage will be produced due to temperature, flow, pressure, the chemical properties of the liquid metal and surface condition of the steel walls. In addition, the non-definite wetting behavior of liquid lead-bismuth to the electrically …

Use Of Positron Annihilation Spectroscopy For Stress-Strain Measurements, Ajit K. Roy

Transmutation Sciences Materials (TRP)

During the past academic year, this project was focused on the characterization of residual stress in welded specimens consisting of austenitic and martensitic stainless steels using an activation technique based on the Positron Annihilation Spectroscopic (PAS) method. The extent of residual stress was expressed in terms of three line-shape parameters (S-, W- and T-). Further, efforts were made to characterize linear lattice defects such as dislocations in the vicinity of Fusion-Line (FL), Heat-Affected- Zone (HAZ), and the base material of the welded specimens using Transmission Electron Microscopy (TEM). The metallurgical microstructures at these three regions have also been evaluated by …

Fundamental And Applied Experimental Investigations Of Corrosion Of Steel By Lbe Under Controlled Conditions: Kinetics, Chemistry Morphology, And Surface Preparation, John Farley, Allen L. Johnson, Dale L. Perry

Transmutation Sciences Materials (TRP)

Advanced nuclear processes and facilities (e.g., transmutation of nuclear waste, fast reactors, and spallation neutron sources) impose special demands on materials, which must withstand high temperatures, high radiation fields, and chemical corrosion. Proposed schemes for transmuting nuclear waste require a nonmoderating coolant such as lead-bismuth eutectic (LBE). While LBE corrodes most steels, small amounts of oxygen in the LBE greatly reduces the corrosion rate, and could ideally re-grow a damaged oxide layer in-situ. The protective oxide layer would thus be self-healing. However, the fundamental understanding of the role of oxygen and passivating oxide layers is presently incomplete.

During the present …

Effect Of Silicon Content On The Corrosion Resistance And Radiation- Induced Embrittlement Of Materials For Advanced Heavy Liquid Metal Nuclear Systems, Ajit K. Roy

Transmutation Sciences Materials (TRP)

This task is focused on the evaluation of the effects of silicon content on both the corrosion behavior and radiation-induced embrittlement of martensitic stainless steels having compositions similar to that of modified 9Cr-1Mo steel, also known as T91 grade steel. T91 grade steel was selected to be a candidate structural material to contain molten lead-bismuth eutectic (LBE), which can act both as a target material and a coolant during the spallation process. The operating temperature during this process may range from 420-550 °C. Thus, moderate tensile strength of the containment material (T91) is a major requirement.

The beneficial effects of …

Theoretical Modeling Of Protective Oxide Layer Growth In Non-Isothermal Lead Alloy Coolant Systems, Yitung Chen, Jinsuo Zhang, Jichun Li

Transmutation Sciences Materials (TRP)

The goal of the proposed research project is to provide basic understanding of the protective oxide layer behaviors and to develop oxide layer growth models of steels in non-isothermal lead-alloys (lead or lead-bismuth eutectic) coolant systems. Precise studies and simulations of all hydrodynamics with thermal conditions encountered in practical coolant loop systems by use of different flowing conditions in the laboratory are difficult and expensive, if not impossible. Therefore it is important and necessary to develop theoretical models to predict the protective oxide layer behaviors at the design stage of a practical lead-alloy coolant system, to properly interpret and apply …

Development Of Nanostructure Based Corrosion-Barrier Coatings On Steel For Transmutation Applications, Biswajit Das

Transmutation Sciences Materials (TRP)

Advanced transmutation systems require structural materials that are able to withstand high neutron fluxes, high thermal cycling, and high resistance to chemical corrosion. The current candidate materials for such structures are ferritic and ferritic-martensitic steels due to their strong resistance to swelling, good microstructural stability under irradiation, and the retention of adequate ductility at typical reactor operating temperatures.

In parallel, lead-bismuth eutectic (LBE) has emerged as a potential spallation target material for efficient production of neutrons, as well as a coolant in the accelerator system. While LBE has excellent properties as a nuclear coolant, it is also highly corrosive to …