Engineering Commons^™

Влияние На Окружающую Среду Технологии Непрерывного Литья, Marian Mazur, Marek Bogacki, Robert Oleniacz, Agnieszka Łopata

Robert Oleniacz

This article presents a complex analysis of the impact of the technology of continuous casting of steel (CCS) on the rate of the air pollutant emissions from one of the Polish steel and iron plants. The emission sources occurring in the production process have been identified and their rate has been determined. The implementation of CCS has brought about significant changes in the production cycle of the steel plant and it also has caused an increase of the production effectiveness of steel products. The calculated environment effects have shown a considerable emission decrease of all pollutants in the scale of …

Trust, Collaboration, And Financial Return In Conservation/Development Partnerships, New England Environmental Finance Center

Economics and Finance

In early 2002 the New England Environmental Finance Center hosted a series of roundtable discussions among municipal officials, residential developers, land trust representatives, and others about "Innovative Approaches to Land Conservation and Smart Growth". Among our observations was that for many of the over 20 conservation/development partnerships we discussed in the series, creation and maintenance of trust was central to success or failure of various stages of the partnership. This suggested a link between creation of trust and financial return for traditionally opposed project partners.

To further examine this matter, we interviewed 11 round table participants and asked questions about …

Non-Steady-State Approach #11;To Steady-State Kinetics: #11;Case Study Of H2s Oxidation By Oxygen, Andrey N. Zagoruiko, Vladimir V. Mokrinskii

Andrey N Zagoruiko

Non-steady-state kinetic models may be used for treatment of steady-state kinetic data in case when algebraic elaboration of steady-state kinetic equations is impossible or complicated. The proposed approach includes numerical integration of time-dependent differential equations until achievement of steady-state, resulting in possibility to numerically obtain the rate values for separate reaction stages for given composition of reaction mixture. The obtained non-steady-state model may be then applied in simulation of catalyst pellets and catalyst beds in research and engineering purposes. The case study demonstrates application of such approach for steady-state kinetic description of complicated reaction system of H2S oxidation by oxygen. …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: Fourth Quarterly Report 09/01/2003-11/30/2003, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the TRP proposed application. Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with only very sparse experimental data. Scientists have noticed that the concentration of oxygen dissolved in the liquid alloy could control the corrosion rate of steels exposed to Pb or Pb-Bi. At high …

Bomb-Pulse Chlorine-36 At The Proposed Yucca Mountain Repository Horizon: An Investigation Of Previous Conflicting Results And Collection Of New Data, Klaus J. Stetzenbach, Fred Phillips, Drew Coleman, Don Baepler, Amy J. Smiecinski

Publications (YM)

Previous studies by scientists at Los Alamos National Laboratory (LANL) and the United States Geological Survey (USGS) quantified ³⁶Cl/Cl to test for the presence of fast pathways at the proposed Yucca Mountain high-level nuclear waste repository. The goal of these studies was to determine whether or not fluids containing bomb-pulse ³⁶Cl/Cl traveled along fast travel pathways and reached the repository horizon, however, the two groups followed somewhat different procedures and produced conflicting results. The objective of this study is to attempt to determine the cause of the conflicting results and to obtain additional data to determine whether or …

Slides: Untitled [British Petroleum], Rusty Riese

Workshop on Directional Drilling in the Rocky Mountain Region (November 13)

Presenter: Dr. Rusty Riese, Consulting Geologist, BP American Production Co.

6 slides

Abstract: For companies doing directional drilling, what are the direct and indirect costs and benefits? When is it economical and what factors does industry take into account in making the decision to utilize directional drilling?

Slides: Untitled [Colorado Attorney General's Office], Carol Harmon

Workshop on Directional Drilling in the Rocky Mountain Region (November 13)

Presenter: Carol Harmon, Colorado Attorney General's Office

8 slides

Abstract: When does the State require directional drilling? Can landowners require it in Surface Use Agreements? What does Colorado's version of the accommodation doctrine mean for directional drilling?

Slides: Untitled [Western Resource Advocates], Mike Chiropolos

Workshop on Directional Drilling in the Rocky Mountain Region (November 13)

Presenter: Mike Chiropolos, Attorney, Western Resource Advocates

10 slides

Abstract: What are the environmental considerations involved with directional drilling? How should the NEPA analysis take this technology into account? When should it be analyzed as an alternative to conventional vertical drilling?

Notes From The Directional Drilling Workshop, University Of Colorado Boulder. Natural Resources Law Center

Workshop on Directional Drilling in the Rocky Mountain Region (November 13)

20 pages

"These notes were taken by one of our law students attending the workshop. They are not a verbatim transcript and they were not supplied by, and may not have been reviewed by, the speakers. There may be errors or gaps in the notes and for these we apologize in advance. Where the speaker provided an abstract of their talk, these are included and noted as such."

Slides: Encana, John Moran

Workshop on Directional Drilling in the Rocky Mountain Region (November 13)

Presenter: John Moran, Reservoir Engineer, Encana Oil & Gas

23 slides

Abstract: For companies doing directional drilling, what are the direct and indirect costs and benefits? When is it economical and what factors does industry take into account in making the decision to utilize directional drilling?

Slides: Directional Drilling: The Promise And The Peril, Alfred W. Eustes Iii

Workshop on Directional Drilling in the Rocky Mountain Region (November 13)

Presenter: Dr. Bill Eustes, Ph.D., P.E., Department of Petroleum Engineering, Colorado School of Mines, Golden, CO

63 slides

Abstract: What is it, where can it be done and how does it fit into full field development for oil and gas? This segment will set the foundation and bring everyone up to a basic level of understanding of the technology of directional drilling.

Developing A Sensing System For The Measurement Of Oxygen Concentration In Liquid Pb-Bi Eutectic: Quarterly Progress Report (Aug. 01 – Oct. 31, 2003), Yingtao Jiang, Bingmei Fu

Transmutation Sciences Materials (TRP)

The experimental setup designed and manufactured in UNLV was shipped to LANL in early Aug. One student has been working in LANL to conduct the experiment since then. In the meantime, one new Ph. D. student has started to run the simulation for transport in oxygen mixing. In Oct., a professional has been hired to work in both experimental and the theoretical studies pertaining to the proposed work.

Environment-Induced Degradation And Crack-Growth Studies Of Candidate Target Materials: Quarterly Progress Report (June 1 – August 31, 2003), Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

As indicated in the original proposal, the primary objective of this task is to evaluate the effect of hydrogen on environment-assisted cracking of candidate target materials for applications in spallationneutron- target (SNT) systems such as accelerator production of tritium (APT) and accelerator transmutation of waste (ATW). The materials selected for evaluation and characterization are martensitic stainless steels including Alloy HT-9, Alloy EP 823 and Type 422 stainless steel. The susceptibility to stress corrosion cracking (SCC) and hydrogen embrittlement (HE) of these materials are being evaluated in aqueous environments of interest using tensile specimens under constant load and slow-strain-rate (SSR) conditions. …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823 For Transmutation Applications: Quarterly Progress Report (June 01 – Aug 31, 2003), Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The purpose of this project is to evaluate the elevated temperature tensile properties of Alloy EP-823, a leading target material for accelerator-driven waste transmutation applications. This Alloy has been proven to be an excellent structural material to contain the lead-bismuth-eutectic (LBE) nuclear coolant needed for fast spectrum operations. Very little data exist in the open literature on the tensile properties of this Alloy. The test material will be thermally treated prior to the evaluation of its tensile properties at temperatures relevant to the transmutation applications. The deformation characteristics of tensile specimens, upon completion of testing, will be evaluated by surface …

Use Of Positron Annihilation Spectroscopy For Stress-Strain Measurements: Quarterly Progress Report (June 01 – August 31, 2003), Ajit K. Roy

Transmutation Sciences Materials (TRP)

The purpose of this collaborative research project involving the University of Nevada Las Vegas (UNLV), the Idaho State University (ISU), and the Los Alamos National Laboratory (LANL) is to evaluate the feasibility of determining residual stresses in cold-worked, plastically-deformed (bent), and welded materials using a nondestructive method based on positron annihilation spectroscopy (PAS). This technique uses γ-rays from a small MeV electron Linac to generate positrons inside the sample via pair production. This method is known to have capabilities of characterizing defects in thick specimens that could not be accomplished by conventional positron technique or other nondestructive methods. The generated …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823 For Transmutation Applications: Annual Progress Report (September 2002 – August 2003), Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The purpose of this project is to evaluate the elevated temperature tensile properties of Alloy EP-823, a leading structural target material for accelerator-driven waste transmutation applications. This alloy has been proven to be an excellent structural material to contain the molten lead-bismuth-eutectic (LBE) nuclear coolant needed for fast spectrum operations. Very little data exist in the open literature on the tensile properties of this martensitic alloy. Three different heats of this material, produced by vacuum induction melting, were thermally treated to produce fully-tempered martensitic microstructure without any retained austenite (Table I). Cylindrical specimens were fabricated from the heat-treated round bars …

Zmiany W Metodyce Modelowania Rozprzestrzeniania Się Zanieczyszczeń W Powietrzu Opartej Na Modelu Gaussa, Robert Oleniacz, Marek Bogacki

Robert Oleniacz

The paper presents the changes that have occurred in December 2002 in the Polish reference modeling methodology (based on the stationary Gaussian atmospheric dispersion model) used for the air quality impact assessment in Poland since the 60s of the 20th century. Discusses the changes that have occurred in the preparation of data for the simulation, the procedure used in shortened and full range of calculation, the algorithms of initial computations and the results of calculations.

English Title: Changes in the methodology of modeling the pollutant dispersion in the air based on the Gaussian model.

Identification Of Dynamic Properties Of Materials For The Nuclear Waste Package, Brendan O'Toole, Mohamed Trabia, Amy J. Smiecinski

Publications (YM)

Stainless steel 316L, titanium alloy grade 7, and alloy C22 are currently under consideration as candidate materials for use in various components associated with the spent nuclear fuel package, which must be designed to withstand structural deformation caused by static, thermal, and handling loads. In addition, it has to maintain its integrity in case of accidents, where it may be subjected to high loads over a very short period of time. Mechanical characteristics of these three materials under dynamic loading are not well documented. This paper describes the procedures and results obtained from experiments performed over a range of slow …

Ocena Funkcjonowania Instalacji Oczyszczania Gazów Odlotowych Z Procesu Grafityzacji Elektrod Węglowych W Sgl Carbon S.A. W Nowym Sączu, Marian Mazur, Robert Oleniacz, Marek Bogacki, Przemysław Szczygłowski

Robert Oleniacz

The paper presents a general analysis of the suitability of individual elements of the flue-gas treatment system used in SGL Carbon SA in Nowy Sacz (Poland) for the graphitization process carried out in new LWG furnaces (Castner type). The flue-gas treatment system consisted of two installations: catalytic afterburning and flue-gas desulfurization. The analysis of the suitability of various methods of flue-gas treatment was based primarily on the assessment of the effects of their application, including the reduction of concentrations of selected components in post-graphitizing gases. The work also summarizes the results of evaluation of the functioning of the whole flue-gas …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: Fourth Quarterly Report 06/01/2003-08/30/2003, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the TRP proposed application. Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with only very sparse experimental data. Scientists have noticed that the concentration of oxygen dissolved in the liquid alloy could control the corrosion rate of steels exposed to Pb or Pb-Bi. At high …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: Annual Report -Phase Ii 09/01/2002-08/30/2003, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the TRP proposed application. Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with only very sparse experimental data. Scientists have noticed that the concentration of oxygen dissolved in the liquid alloy could control the corrosion rate of steels exposed to Pb or Pb-Bi. At high …

Development Of A Systems Engineering Model Of The Chemical Separations Process: Quarterly Progress Report 5/16/03- 8/15/03, Yitung Chen, Randy Clarksean, Darrell Pepper

Separations Campaign (TRP)

Two activities are proposed in this Phase I task: the development of a systems engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model is the start of an integrated approach to the analysis of the materials separations associated with the AAA Program. A second portion of the project is to streamline and improve an integral part of the overall systems model, which is the software package AMUSE. AMUSE analyzes the UREX process and other related solvent extraction processes and defines many of the process streams that are integral …

Development Of A Systems Engineering Model Of The Chemical Separations Process, Yitung Chen, Sean Hsieh, Randy Clarksean, Darrell Pepper

Separations Campaign (TRP)

The AFCI program is developing technology for the transmutation of nuclear waste to address many of the long-term disposal issues. An integral part of this program is the proposed chemical separations scheme.

Nearly all issues related to risks to future generations arising from long-term disposal of such spent nuclear fuel is attributable to about 2% of its content. Such 2% is made up primarily of plutonium, neptunium, americium, and curium (the transuranic elements) and long-lived isotopes of iodine and technetium created as products from the fission process in power reactors. When transuranics are removed from discharged fuel destined for disposal, …

Day 5. Friday, August 15, 2003: Rocky Mountain National Park, University Of Colorado Boulder. Natural Resources Law Center

Energy Field Tour 2003 (August 11-16)

1 page.

Contains references.

Day 4. Thursday, August 14, 2003: Trapper Mine, University Of Colorado Boulder. Natural Resources Law Center

Energy Field Tour 2003 (August 11-16)

8 pages (includes some color illustrations).

Contains references.

Day 4. Thursday, August 14, 2003: Hayden Power Plant, University Of Colorado Boulder. Natural Resources Law Center

Energy Field Tour 2003 (August 11-16)

5 pages (includes color illustrations and maps).

Contains references.

Day 3. Wednesday, August 13, 2003: Travel To Grand Junction, University Of Colorado Boulder. Natural Resources Law Center

Energy Field Tour 2003 (August 11-16)

5 pages (includes color illustration and map).

Contains references.

Day 3. Wednesday, August 13, 2003: Oil Shale, University Of Colorado Boulder. Natural Resources Law Center

Energy Field Tour 2003 (August 11-16)

8 pages.

Contains references.

Day 3. Wednesday, August 13, 2003: Lighthawk Flyover, University Of Colorado Boulder. Natural Resources Law Center

Energy Field Tour 2003 (August 11-16)

11 pages (includes some color illustrations and maps).

Contains references.

Day 3. Wednesday, August 13, 2003: Coalbed Methane Development, University Of Colorado Boulder. Natural Resources Law Center

Energy Field Tour 2003 (August 11-16)

10 pages (includes color illustrations and maps).