Engineering Commons^™

Development Of Integrated Process Simulation System Model For Spent Fuel Treatment Facility (Sftf) Design, Yitung Chen, Sean Hsieh

Separations Campaign (TRP)

The major objectives will lead to a creation of framework that combines all the strengths of AMUSE’s complicated calculations, well-established commercial system process package and ISOPro’s flexible parameter optimization modules. Development of the process simulation code can be done using the solvent extraction process at Argonne National Laboratory in collaboration with the research team from Mechanical Engineering Department at UNLV.

Research accomplishments:

• Integrated the ASPEN-Plus process model with the ISOPro system engineering modeling package, developed by the UNLV team.
• Tested the simplified system process integration using the ISOPro package.
• Generated complete version of the ISOPro package user manual and tutorial. …

Improved Parameterization To Invert Rayleigh-Wave Data For Shallow Profiles Containing Stiff Inclusions, Carlos Calderon-Macias, Barbara Luke

Civil and Environmental Engineering and Construction Faculty Research

Inversion of shear-wave velocity profiles from phase-velocity measurements of Rayleigh-wave energy for sites containing stiff layers can be erroneous if such layers are not characterized in the starting or reference model. Incorporation of a priori knowledge then is key for converging upon a realistic or meaningful solution. Resolving soil profiles in desert regions where stiff layers cemented with calcium carbonate are intermixed with softer, uncemented media is an application for which locating shallow stiff inclusions has important implications. Identification of the stiff layers is critical for foundation design and cost estimating of excavations. A parameterization that seems adequate for this …

Design Concepts And Process Analysis For Transmuter Fuel Manufacturing, Georg F. Mauer

Fuels Campaign (TRP)

The safe and effective manufacturing of actinide-bearing fuels for any transmutation strategy requires that the entire manufacturing process be contained within a shielded hot cell environment. To ensure that the fabrication process is feasible, the entire process must be designed for remote operation. The equipment must be reliable enough to perform over several decades, and also easy to maintain or repair remotely. The facility must also be designed to facilitate its own decontamination and decommissioning. In addition to these design factors, the potential viability of any fuel fabrication process will also be impacted by a number of variables, such as …

Impact Of The Synthesis Process On Structure Properties For Afci Fuel Candidates, Kenneth Czerwinski

Fuels Campaign (TRP)

Synthesis of actinium mononitrides using carbothermic reduction of the corresponding oxides has a few outstanding issues, including the formation of secondary phases such as oxides and carbides and low densities of the final product. Furthermore the requirement of a high process temperature at 1700°C, for more than 12 hours is also a drawback particularly for Americium-bearing samples. Therefore, it is important to explore the use of other possible routes to synthesize actinide mononitrides.

A low temperature process is used in this research to produce actinide mononitrides using a fluoride route in which the first step is to mix the actinide …

Solution-Based Synthesis Of Nitride Fuels, Tyler A. Sullens, Kenneth Czerwinski

Fuels Campaign (TRP)

The preliminary studies into the synthesis of actinide nitride fuels through a low temperature, liquid ammonia based synthesis route have been conducted on the uranium containing system, and there is good indication for the success of synthesizing uranium (III) nitride. The dissolution of iodine in ammonia is a rapid process, resulting in a pale green solution, which does not result in any observable oxidation of iodine. The cannula transfer of dissolved iodine into the reaction vessel containing U metal has been conducted with little to no residual iodine remaining in the original flask. The metal being used for these reactions …

Using Building Energy Simulation And Geospatial Modeling Techniques In Determine High Resolution Building Sector Energy Consumption Profiles, Shem C. Heiple

Dissertations and Theses

A technique is presented for estimating hourly and seasonal energy consumption profiles in the building sector at spatial scales down to the individual taxlot or parcel. The method combines annual building energy simulations for cityspecific prototypical buildings and commonly available geospatial data in a Geographical Information System (GIS) framework. Hourly results can be extracted for any day and exported as a raster output at spatial scales as fine as an individual parcel (

Windmill Documentary, Timothy David Stoltenburg

Honors Capstones

Capstone submitted as a graduation requirement for the BSU Honors Program.

2006 Fall Engr333 Project Final Report, 2006 Fall Engr333

ENGR 333

The objective of this project was to demonstrate Calvin’s interest in alternative energy. The development of a short-term plan to implement a demonstration wind turbine and a long-term plan to determine the feasibility of a larger turbine for the future demonstrates this interest. The class was divided into five teams: management, external relations, long-term technology, short-term technology, and campus infrastructure. While each team had its own objectives, everyone worked together to share information and accomplish the overall project goals. This management technique provided necessary structure and simulated an environment typically found in a career environment.

College Of Engineering Senior Design Competition Fall 2006, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

2006 Fall Engr333 Project Posters, 2006 Fall Engr333

ENGR 333

To demonstrate Calvin’s interest in alternative energy by developing a short-term plan to implement a demonstration wind turbine and a long-term plan to determine the feasibility of a larger turbine for the future.

High Temperature Heat Exchanger Project: Quarterly Progress Report July 1, 2006 Through September 30, 2006, Anthony Hechanova

Publications (NSTD)

Hydrodynamics and thermal numerical modeling coupled with sulfur trioxide decomposition for the one channel geometry with three different channel configurations were performed. The results obtained from the numerical modeling were compared with the baseline design under the same boundary and operation conditions. The case with diamond shaped channels has the highest percentage of sulfuric acid decomposition. The baseline channel geometry has the lowest pressure drop compared with other cases.

Fisheries Research Contract Report No. 14 - Aquatic Animal Health Subprogram: Development Of A National Translocation Policy Using Abalone And Prawns As Templates For Other Aquatic Species (Frdc Project No. 2004/080) Final Report, Brian Jones, Fran Stephens

Fisheries Research Contract Reports

The use of scientifically based hazard identification, risk analysis and risk management is fundamental to managing unwanted effects. Hazards, such as quarantine incursions, will continue to occur despite the use of risk assessment methodologies but the frequency and severity of their occurrence will be reduced.

This was recognised by the Ministerial Council on Forestry, Fisheries and Aquaculture in 1999 when they published the "National policy for the translocation of live aquatic organisms".

This FRDC project provides a simple risk assessment methodology based on the Australian Standard for Risk Management (AS/NZS 4360: 2004) and one that is consistent with the Ministerial …

2006 Fall Engr333 Project Assignment, Matthew K. Heun

ENGR 333

In the Fall 2006 semester, I challenged the ENGR333 students to “construct a realistic plan to make a significant impact on the Calvin College campus with electrical power generated from wind resources.”

Customer

The customer for this project was Calvin’s VP for finance Henry DeVries.

High Temperature Heat Exchanger Project: Quarterly Progress Report April 1, 2006 Through June 30, 2006, Anthony Hechanova

Publications (NSTD)

Numerical Analyses of the Ceramatec Sulfuric Acid Decomposer. Comparisons with experiments for the Ceramatec sulfuric acid decomposer coupon with eight straight channels for four different geometries and four different flow rates were performed. All of the operation and boundary conditions for the calculations were the same as in the Ceramatec experiments. Good agreement was found. The overall pressure drop difference between calculations and experiments for most of the cases is within 10%.

Mansfield Ct: Planning A New Village Center, Maggie Jones, Richard Barringer

Planning

The case follows the development of a plan for a new village center in Storrs, the central village of Mansfield, Connecticut. A process that was transparent and inclusive of the community members yielded a plan that gained the approval of the Town, the landowner (the University of Connecticut), and the citizenry. The process relied on the mending of fences, the leadership of key participants, and an innovative strategy that included development of a nonprofit corporation and creative use of grant money. While zoning changes are still in the works, the first stage of building goes forward.

South Kingstown Ri: New Zoning For An Historic Mill, Maggie Jones, Richard Barringer

Planning

The village of Peace Dale in the town of South Kingstown, Rhode Island, developed around several mills that commenced operations in the 1800s. One mill, known as the Palisades, is still partially active and in excellent condition, but much of its square footage is unutilized. A citizens’ group of artists and business people joined with the mill owners and the town of South Kingstown to develop new zoning regulations to make more flexible the permitted uses for the mill site. The proposed zoning will allow the mill complex to feature a mix of retail, residential, and manufacturing uses, while preserving …

Augusta Me: The New Bridge Begets A New Planned Neighborhood, Molly Pulsifer, Richard Barringer

Planning

Construction of a new Third Bridge over the Kennebec River in Augusta offered the prospect of a new and handsome gateway to the city. Further, the resulting change in traffic patterns offered the City the chance to plan for a pattern of development quite different from what the city had experienced for the past half-century. The case study describes the planning and construction of the new bridge and corridors that re-routed traffic out of Augusta’s downtown and older neighborhoods, and created the opportunity for planned development adjacent to the corridor created by the new bridge. It goes on to describe …

Changing Maine, 1960-2010: Teaching Guide, Richard Barringer, New England Environmental Finance Center

Maine History & Policy Development

Unlike forty years ago, none of us is now certain what the future holds for Maine – except that it will be different. Maine has been transformed by the events of the recent decades. We have come into a new world, a new time – a new historical era, if you will. This new era, like previous eras in Maine history, will require of us new ways of thinking, new ways of understanding, new ways of organizing ourselves as a community of people, if the values and culture we share and cherish are to endure and flourish.

The Land Is In Your Hands : A Practical Guide For Owners Of Small Rural Landholdings In Western Australia, Department Of Agriculture And Food, Wa

Bulletins 4000 -

This Bulletin discusses various aspects of managing a small farm or property in Western Australia, including soil and land care, vegetation and plant control on farm holdings, water resource management, biosecurity, plant, animal and insect pest control and livestock management.

Dissolution, Reactor, And Environmental Behavior Of Zro 2 -Mgo Inert Fuel Matrix Neutronic Evaluation Of Mgo-Zro2 Inert Fuels, E. Fridman, A. Galperin, E. Shwageraus

Fuels Campaign (TRP)

In the second year of the “Dissolution, Reactor, and Environmental Behavior of ZrO₂-MgO Inert Fuel Matrix” project initiated and directed by UNLV, the Ben-Gurion University (BGU) group research was focused on the development of practical PWR core nuclear design fully loaded with Reactor Grade (RG) Pu fuel incorporated in fertile free matrix. The design strategy was based on the basic feasibility study results performed at BGU in the Year 1 of the project.

Relationships Between Pacific And Atlantic Ocean Sea Surface Temperatures And U.S. Streamflow Variability, Glenn A. Tootle, Thomas C. Piechota

Civil and Environmental Engineering and Construction Faculty Research

An evaluation of Pacific and Atlantic Ocean sea surface temperatures (SSTs) and continental U.S. streamflow was performed to identify coupled regions of SST and continental U.S. streamflow variability. Both SSTs and streamflow displayed temporal variability when applying the singular value decomposition (SVD) statistical method. Initially, an extended temporal evaluation was performed using the entire period of record (i.e., all years from 1951 to 2002). This was followed by an interdecadal-temporal evaluation for the Pacific (Atlantic) Ocean based on the phase of the Pacific Decadal Oscillation (PDO) (Atlantic Multidecadal Oscillation (AMO)). Finally, an extended temporal evaluation was performed using detrended SST …

Evaluation Of Microbial Diversity In Wetland Through Polymerase Chain Reaction (Pcr) And Restriction Fragment Length Polymorphism (Rflp), Gregory K. Joseph

Theses and Dissertations

The diversity of microbial communities in wetlands has not been fully measured. These communities may offer tools to naturally remediate sites polluted with chlorinated compounds. Polmerase Chain Reaction (PCR) and Restriction Fragment Length Polymorphism (RFLP) are genomic techniques that are capable of rapidly characterizing bacteria communities and can provide valuable information about the diversity of microbial communities.

Molecular Characterization Of Wetland Soil Bacterial Community In Constructed Mesocosms, Ethan C. Bishop

Theses and Dissertations

The use of wetlands to effectively remediate aquifers contaminated with chlorinated solvents is an emerging technique, which shows high promise. In order to better understand this process and test its legitimacy, a treatment wetland was constructed at Wright-Patterson AFB, Dayton, Ohio and, in a joint effort with Wright State University (WSU), has previously shown the effective removal of PCE. The purpose of this research was to characterize the soil bacterial community, pre-PCE injection, among three wetland plant species from the sedge family (Cyperaceae) within constructed wetland mesocosms and to identify any bacterial dominance. Carex comosa, Scirpus atrovirens, and Eleocharis erythropoda …

On The Spatial Nature Of The Groundwater Pumping Externality, Nicholas Brozovic, David L. Sunding, David Zilberman

Daugherty Water for Food Global Institute: Faculty Publications

Most existing economic analyses of optimal groundwater management use single-cell aquifer models, which assume that an aquifer responds uniformly and instantly to ground- water pumping. This paper demonstrates how spatially explicit aquifer response equations from the water resources engineering literature may be embedded in a general economic framework. Calibration of our theoretical model to published economic studies of spe- cific aquifers demonstrates that, by averaging basin drawdown across the entire resource, existing studies generally understate the magnitude of the groundwater pumping external- ity relative to spatially explicit models. For the aquifers studied, the drawdown predicted by single- cell models may …

College Of Engineering Senior Design Competition Spring 2006, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

High Temperature Heat Exchanger Project: Quarterly Progress Report January 1, 2006 Through March 31, 2006, Anthony Hechanova

Publications (NSTD)

Quarterly Collaboration Meeting. The UNLVRF HTHX Project quarterly meeting was held in Albuquerque, NM, March 16 and 17, 2006. The purpose of the meeting was to promote collaboration and communication among the UNLV Research Foundation partners. A tour of Sandia National Laboratory was also provided that included a visit to their sulfuric acid decomposition test apparatus. There were 24 attendees from universities, national laboratories, and private industry. Collaborators discussed their research progress. The next meeting will be in July in Salt Lake City, UT.

Design Concepts And Process Analysis For Transmuter Fuel Manufacturing: Quarterly Progress Report #6, Kamalakar Alluri, Georg F. Mauer

Fuels Campaign (TRP)

Project Milestones

• Completed a systematic study seeking to arrive at an optimized plant configuration, using value engineering techniques in January 2006.

• Vision-based robot serving and automated plant safety monitoring is currently in progress.

Effect Of Silicon Content On The Corrosion Resistance And Radiation-Induced Embrittlement Of Materials For Advanced Heavy Liquid Metal Nuclear Systems: Quarterly Progress Report (November 2005 – January 2006), Ajit K. Roy

Transmutation Sciences Materials (TRP)

This task is intended to study the effect of Si content not only on the corrosion resistance but also on the radiation-induced embrittlement of martensitic stainless steels. The susceptibility of these alloys with different Si content to stress corrosion cracking, general corrosion and localized corrosion will be evaluated in the molten LBE and aqueous environments of different pH values using state-of-the-art testing techniques. Testing in the aqueous media is intended to develop baseline data for comparison purpose. Radiation-induced embrittlement of these alloys will initially be studied by irradiating the test specimens with bremmstrahlung gamma radiation from 20-40 MeV electron beams …

Energy Efficient Process Heating: Managing Air Flow, Kevin Carpenter, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

Much energy is lost through excess air flow in and out of process heating equipment. Energy saving opportunities from managing air flow include minimizing combustion air, preheating combustion air, minimizing ventilation air, and reconfiguring openings to reduce leakage.

This paper identifies these opportunities and presents methods to quantify potential energy savings from implementing these energy-savings measures. Case study examples are used to demonstrate the methods and the potential energy savings.The method for calculating savings from minimizing combustion air accounts for improvement in efficiency from increased combustion temperature and decreased combustion gas mass flow rate.

The method for calculating savings from …

Measuring Plant-Wide Energy Savings, J. Kelly Kissock, Carl Eger

Mechanical and Aerospace Engineering Faculty Publications

This paper presents a general method for measuring plant-wide industrial energy savings and demonstrates the method using a case study from an actual industrial energy assessment. The method uses regression models to characterize baseline energy use. It takes into account changes in weather and production, and can use sub-metered data or whole plant utility billing data. In addition to calculating overall savings, the method is also able to disaggregate savings into components, which provides additional insight into the effectiveness of the individual savings measures.

Although the method incorporates search techniques and multi-variable least-squares regression, it is easily implemented using data …