Engineering Commons^™

Decoupling And Disturbance Rejection Control For Target Circulation, Jian Ma, Joon S. Lee, Woosoon Yim

Reactor Campaign (TRP)

The Target Complex loop TC-1 was originally conceived as part of an accelerator-driven system (ADS) pilot plant that was designed and developed by the Institute of Physics and Power Engineering (IPPE) and Experimental and Development Organization (EDO) “Gidropress” in Obninsk, Russia, under the International Science and Technology Center Project #559 in 1998. It was to be used as the target in a 1 MWth ADS experiment run off of the LANSCE proton accelerator at Los Alamos National Laboratory (LANL). When the U.S. transmutation program changed priorities from accelerator-driven systems towards nuclear fission reactors, the TC-1 loop was brought to UNLV …

Modeling And Design Algorithms For Electromagnetic Pumps, Daniel P. Cook, Yitung Chen, Jian Ma

Reactor Campaign (TRP)

Electromagnetic (EM) induction pumps are used extensively in current and proposed nuclear power systems and industrial molten metal transfer operations. Although the Magnetohydrodynamic (MHD) theory that underlies the operation of these types of pumps has been studied extensively in the past few decades, the design of specific EM pumping systems for specific flow cases requires computational tools and expertise, which is lacking in the U.S. However, for the past two years, researchers at UNLV have been utilizing the TC-1 liquid metal loop system at UNLV and an Annular Linear Induction Pump (ALIP) to drive the liquid metal and to develop …

Thermal Transient Flow Rate Sensor For High Temperature Liquid Metal Cooled Nuclear Reactor, Yingtao Jiang, Jian Ma

Reactor Campaign (TRP)

In nuclear power plants and accelerator driven systems (ADS) for nuclear waste treatment, it is important to monitor the coolant flow rate in the reactor core and pipe-line. In such a strong irradiation, high pressure, and temperature environment, the existing flow measurement techniques (such as Electromagnetic flow meters, Ultrasonic flow meters, Turbine flow meters, etc.) are not accurate and reliable.

The measurement of flow rates (mass flow rates or volume flow rate) plays a notable role in monitoring and controlling the experimental conditions. The bulk flow rates can be obtained through direct methods, which measure the amount of discharged fluids …

Knowledge-Based Information Resource Management System For Materials Of Sodium-Cooled Fast Reactor, Sean Hsieh

Reactor Campaign (TRP)

In the development of advanced fast reactors, materials and coolant/ material interactions pose a critical barrier for higher temperature and longer core life designs. For sodium-cooled fast reactors (SFRs) such as the Experimental Breeder Reactors in Idaho and the Fast Flux Test Facility in Hanford, experience has shown that qualified structural materials and fuel cladding severely limits their economic performance.

Liquid sodium has been selected as the primary coolant candidate for the Advanced Burner Reactor (ABR) of the Global Nuclear Partnership (GNEP). Materials improvement has been identified as a major thrust to improve fast reactor economics. Researchers from universities, national …

Monaco/Mavric Evaluation For Facility Shielding And Dose Rate Analysis, Charlotta Sanders, Denis Beller

Reactor Campaign (TRP)

The dimensions and the large amount of shielding required for Global Nuclear Energy Partnership (GNEP) facilities, advanced radiation shielding, and dose computation techniques are beyond today’s capabilities and will certainly be required. With the Generation IV Nuclear Energy System Initiative, it will become increasingly important to be able to accurately model advanced Boiling Water Reactor and Pressurized Water Reactor facilities, and to calculate dose rates at all locations within a containment (e.g., resulting from radiations from the reactor as well as the from the primary coolant loop) and adjoining structures (e.g., from the spent fuel pool).

The MAVRIC sequence is …

Fundamental And Applied Experimental Investigations Of Corrosion Of Steel By Lbe Under Controlled Conditions: Kinetics, Chemistry Morphology, And Surface Preparation, John Farley, Allen L. Johnson

Transmutation Sciences Materials (TRP)

Advanced nuclear processes and facilities (e.g., transmutation of nuclear waste, fast reactors, and spallation neutron sources) impose special demands on materials, which must withstand high temperatures, high radiation fields, and chemical corrosion. Proposed schemes for transmuting nuclear waste require a nonmoderating coolant such as lead-bismuth eutectic (LBE) or liquid sodium. While LBE corrodes most steels, small amounts of oxygen in the LBE greatly reduces the corrosion rate, and could ideally re-grow a damaged oxide layer in situ. The protective oxide layer would thus be self-healing. However, a fundamental understanding of the role of oxygen and passivating oxide layers is presently …

Effect Of Silicon Content On The Corrosion Resistance And Radiation-Induced Embrittlement Of Materials For Advanced Heavy Liquid Metal Nuclear Systems, Ajit K. Roy

Transmutation Sciences Materials (TRP)

The beneficial effects of Si on both the metallurgical and corrosion properties of Cr-Mo steels have previously been demonstrated at UNLV. Therefore, additions of Si ranging from 0.5-2.0 weight percent (wt%) was attempted in this investigation to explore Si effect on both the high temperature tensile properties and corrosion behavior of T91 grade steel. Corrosion studies in the presence of molten LBE could not be performed due to a lack of proper experimental facilities at UNLV. Therefore, detailed corrosion studies involving Si-containing T91 grade steels were performed in an aggressive aqueous solution of acidic pH. Further, significant efforts have been …

Theoretical Modeling Of Protective Oxide Layer Growth In Non-Isothermal Lead Alloy Coolant Systems, Yitung Chen, Taide Tan, Jinsuo Zhang, Jichun Li

Transmutation Sciences Materials (TRP)

In advanced nuclear energy systems, lead alloys emerge as strong candidates for transmutation and advanced reactor systems as nuclear coolants and spallation neutron targets. However, it is widely recognized that corrosion of materials caused by lead alloys presents a critical barrier to their industrial use. A few experimental research and development projects have been set up by different groups such as at Los Alamos National Laboratory to study the corrosion phenomena in their test facilities and to develop mitigation techniques and materials. One of the central or main techniques under development is to use active control of oxygen thermodynamic activity …

Development Of Nanostructure Based Corrosion-Barrier Coatings On Steel For Transmutation Applications, Biswajit Das

Transmutation Sciences Materials (TRP)

Advanced transmutation systems require structural materials that are able to withstand high neutron fluxes, high thermal cycling, and high resistance to chemical corrosion. The current candidate materials for such structures are ferritic and ferritic-martensitic steels due to their strong resistance to swelling, good microstructural stability under irradiation, and the retention of adequate ductility at typical reactor operating temperatures.

In parallel, lead-bismuth eutectic (LBE) has emerged as a potential spallation target material for efficient production of neutrons, as well as a coolant in the accelerator system. While LBE has excellent properties as a nuclear coolant, it is also highly corrosive to …

Interaction Between Metal Fission Products And Triso Coating Materials, Clemens Heske

Fuels Campaign (TRP)

This project focuses on the chemical bonding and interface formation of metal fission products with the coating materials used in tri-isotropic (TRISO) fuel particles for gas-cooled reactors. By combining surface- and bulk-sensitive spectroscopic and microscopic methods, intermediate chemical phases at the interface, intermixing/diffusion behavior, and the electronic interface structure for different coating materials and metals are examined.

In detail, the project studies the interface formation of Pd, Cs, and Ag with SiC and pyrolytic carbon. Using SiC single crystals and highly-ordered pyrolytic carbon (HOPG) as substrates, interfaces are prepared under controlled conditions in an ultra-high vacuum environment and are studied …

Design Concepts And Process Analysis For Transmuter Fuel Manufacturing, Georg F. Mauer

Fuels Campaign (TRP)

The safe and effective manufacturing of actinide-bearing fuels for any transmutation strategy requires that the entire manufacturing process be contained within a shielded hot cell environment. To ensure that the fabrication process is feasible, the entire process must be designed for remote operation. The equipment must be reliable enough to perform over several decades, and also easy to maintain or repair remotely. The facility must also be designed to facilitate its own decontamination and decommissioning. In addition to these design factors, the potential viability of any fuel fabrication process will also be impacted by a number of variables, such as …

Dissolution, Reactor, And Environmental Behavior Of Zro2-Mgo Inert Fuel Matrix, Kenneth Czerwinski

Fuels Campaign (TRP)

This project will examine inert fuels containing ZrO₂ and MgO as the inert matrix. Ceramics with this inert matrix, Ce, U and eventually Pu will be synthesized and examined. While the Advanced Fuel Cycle Initiative focus is on inert fuels with Pu as the fissile component, this task will perform initial laboratory experiments with Ce and U. The initial work with Ce will be performed early in the project with results used as a basis for U studies. Reactor physics calculations will be used to examine suitable quantities of burnable poisons from the candidate elements Gd, Er, or Hf. …

Impact Of The Synthesis Process On Structure Properties For Afci Fuel Candidates, Kenneth Czerwinski

Fuels Campaign (TRP)

The research objectives are:

• To explore a low-temperature fluoride route to synthesize actinide nitrides. • To characterize actinide nitrides structurally and thermally.

• To use high resolution TEM techniques to explore the microstructure of the radioactive samples.

Solution-Based Synthesis Of Nitride Fuels, Kenneth Czerwinski, Tyler A. Sullens

Fuels Campaign (TRP)

One of the original synthetic routes devised for the synthesis of U (III)N involved the entire reaction taking place in liquid ammonia. Several experimental reactions were conducted in an attempt to synthesize the UI₃(NH₃)_x and U(NH₂)₃(NH₃)_x precursors of U(III) N. Each attempt involved cleaning of the uranium metal to remove the oxide coating of the metal reagent with 3 washes of concentrated nitric acid, each followed by a rinse with liquid ammonia. Success of this cleaning procedure was varied, with a majority of cleaned metal oxidizing rapidly once …

Catalytic Wet Air Oxidation Of Mono Azo Dye Orange Ii: Catalyst Selection, Reaction Kinetics, And Modeling, Pinar Ozdural

Civil & Environmental Engineering Theses & Dissertations

Wastewaters generated as byproducts of dyeing processes are not treatable with conventional methods. It has been estimated that among the 900,000 tons of different dyes produced annually in the world, approximately 10–15% are lost in wastewater streams during manufacturing and processing operations. Once in rivers and streams, dyes cause major problems, such as reducing light penetration, or displaying toxic effects on aquatic life. Therefore, it is essential that dyes are removed from wastewaters before being discharged into the environment.

This study focuses on the catalytic wet air oxidation (CWAO) of Orange II, a mono azo dye used in large amounts …

2007 Fall Engr333/Biol354 Project Final Report, 2007 Fall Engr333, 2007 Fall Biol354

ENGR 333

The students of Calvin College’s Engineering 333 and Biology 354 classes were given the task of determining “What would it take to make Calvin College Carbon Neutral?” At first glance, it would not appear that classes on Advanced Thermal System Design and Investigations in Plant Ecology would have much in common. However, the biology and engineering students comprising these classes banded together to tackle the problem. Coming to a satisfactory conclusion would require:

• Creating an inventory of Green House Gas (GHG) emissions and sequestration potential
• Coming up with detailed solutions to achieve Carbon Neutrality
• Working out a practical schedule to …

College Of Engineering Senior Design Competition Fall 2007, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

2007 Fall Engr333/Biol354 Project Solutions Poster, 2007 Fall Engr333, 2007 Fall Biol354

ENGR 333

A carbon footprint is term which refers to the net amount of greenhouse gases produced to directly or indirectly by human activities and is usually expressed in terms of metric tons of carbon dioxide. The Calvin community places a strong emphasis on practicing good stewardship, including stewardship of Creation. Reducing Calvin’s carbon footprint is crucial because carbon dioxide is a major greenhouse gas and contributes heavily to global climate change. In a previous portion of this project, the carbon footprint of Calvin College was calculated to be about 66,400 MTCE (Metric Tons Carbon dioxide Emitted). The goal of this portion …

2007 Fall Engr333/Biol354 Project Footprint Poster, 2007 Fall Engr333, 2007 Fall Biol354

ENGR 333

The students of Calvin College’s Engineering 333 and Biology 354 classes were given the task of determining “What would it take to make Calvin College Carbon Neutral?” At first glance, it would not appear that classes on Advanced Thermal System Design and Investigations in Plant Ecology would have much in common. However, the biology and engineering students comprising these classes banded together to tackle the problem. Coming to a satisfactory conclusion would require: Creating an inventory of Green House Gas (GHG) emissions and sequestration potential Coming up with detailed solutions to achieve Carbon Neutrality Working out a practical schedule to …

Nevada Risk Assessment/Management Program – Phase 2 (Nramp2): Quarterly Progress Report July 1, 2007 Through September 30, 2007, Klaus J. Stetzenbach

Nevada Risk Assessment/Management Program

Work conducted in this 4th quarter consisted of 3 major activities:

• Continue the receipt and reconciliation of Area 5 Radioactive Waste Management Site (RWMS) inventory data.

• Receive, review, install, calibrate, and run the Goldsim Area 5 Performance Assessment (PA) Model, and review the supporting parameters and assumptions in the 93-document reference set as a tool for regulatory compliance and closure assessment.

• Identify, review, and compare the interpretation of pertinent regulatory guidelines and orders by DOE sites in compliance for PA, Compliance Assessment (CA), and closure activities - as they may relate to the Nevada Test Site (NTS) …

High Temperature Heat Exchanger Project: Quarterly Progress Report July 1, 2007 Through September 30, 2007, Anthony Hechanova

Publications (NSTD)

• Ceramatec Sulfuric Acid Decomposer. The numerical model of a SiC ceramic coupon with two layers of microchannels was developed. Calculations of the factor of safety and probability of failure for the case of a straight channel were performed. Results for a pressure of 7.5 MPa were performed. The thermal and mechanical stress analyses of the Ceramatec HTHX and decomposer were completed.

• Bayonet Heat Exchanger. The thermal and mechanical stress analyses of the bayonet type HTHX and decomposer (Sandia design) were completed. Temperature profiles obtained from thermocouples measured from the Sandia experiments have been applied to the whole packed …

Implementation Of Uncertainty Propagation In Triton/Keno: To Support The Global Nuclear Energy Partnership, Charlotta Sanders, Denis Beller

Reactor Campaign (TRP)

Monte Carlo methods are beginning to be used for three-dimensional fuel depletion analyses to compute various quantities of interest, including isotopic compositions of used fuel.1 The TRITON control module, available in the SCALE 5.1 code system, can perform three dimensional (3-D) depletion calculations using either the KENO V.a or KENO-VI Monte Carlo transport codes, as well as the two-dimensional (2- D) NEWT discrete ordinates code. For typical reactor systems, the neutron flux is not spatially uniform. For Monte Carlo simulations, this results in non-uniform statistical uncertainties in the computed reaction rates. For spatial regions where the flux is low, e.g., …

Monaco/Mavric Evaluation For Facility Shielding And Dose Rate Analysis: To Support The Global Nuclear Energy Partnership, Charlotta Sanders, Denis Beller

Reactor Campaign (TRP)

Monte Carlo methods are used to compute fluxes or dose rates over large areas using mesh tallies. For problems that demand that the uncertainty in each mesh cell be less than some set maximum, computation time is controlled by the cell with the largest uncertainty. This issue becomes quite troublesome in deep-penetration problems, and advanced variance reduction techniques are required to obtain reasonable uncertainties over large areas.

In this project the MAVRIC sequence will be evaluated along with the Monte Carlo engine Monaco to investigate its effectiveness and usefulness in facility shielding and dose rate analyses. A previously MCNP-evaluated cask …

2007 Engr333/Biol354 Project Assignment, Matthew K. Heun

ENGR 333

The Fall 2007 semester ENGR333 project involved a collaboration with students in BIOL354, taught by my colleague Dave Warners. We asked our students “What would it take to make Calvin College carbon neutral?”

This project resulted in the first-ever carbon dioxide emissions and sequestration assessment of Calvin College, attached below.

The student presenters animated the pie charts, and an audible gasp filled the hall when the imbalance between carbon emissions and carbon sequestration became clear.

The students also studied potential routes to carbon neutrality, one of which was a green revolving fund.

This class project resulted in a co-authored publication …

Estimating Business And Residential Water Supply Interruption Losses From Catastrophic Events, Nicholas Brozovic, David L. Sunding, David Zilberman

Daugherty Water for Food Global Institute: Faculty Publications

Following man-made or natural catastrophes, widespread and long-lasting disruption of lifelines can lead to economic impacts for both business and residential lifeline users. As a result, the total economic losses caused by infrastructure damage may be much higher than the value of damage to infrastructure itself. In this paper, we consider the estimation of economic impacts on businesses and residential consumers resulting from water supply disruption. The methodology we present for estimating business interruption losses assumes that marginal losses are increasing in the severity of disruption and that there may be a critical water availability cutoff below which business activity …

Understanding And Optimizing Surfaces And Interfaces In Energy Conversion Devices, Clemens Heske

UNLV Renewable Energy Symposium

This inaugural event is dedicated to showcasing the renewable/sustainable energy projects of UNLV faculty, staff, students, and collaborators, as well as other external projects underway statewide and nationally. The development and utilization of new technologies to protect the environment, achieve energy independence, and strengthen the economy will be explored. Speakers and poster-session presenters will provide further insight to many ongoing projects and innovative research ideas.

Organized by UNLV’s Office of Strategic Energy Programs, the event offers participants the opportunity to learn about energy projects and will encourage networking and collaboration. This symposium is intended for researchers, educators, students, policy makers, …

Risk Assessment For Hazardous Materials Incident, Washington County, Tennessee: Road Transportation, Rail Transportation, And Hazardous Materials Storage., Steed Kenlee Stagnolia

Electronic Theses and Dissertations

This study was conducted to provide a quantitative risk assessment for road transportation, railway transportation, and storage of hazardous materials in Washington County, Tennessee. A roadside survey, railroad hazardous materials survey, and a chemical inventory were conducted. It revealed an estimated 267,858 HAZMAT shipments per year on primary and secondary roadways and an estimated total of 9.4 x 109 tons of HAZMAT shipped by rail per year. There are 49 facilities that store a daily average of 33,722,700 lbs of HAZMAT. The risk of a hazardous materials incident occurring in Washington County is highest for Interstate transportation. The risk for …

Application Of Iso Tank In Chemimcal Logisitcs In China And Relative Issues, Hao Zhang

World Maritime University Dissertations

No abstract provided.

Research On Establishment Of Oil Spill Emergency Response System In China Qingdao Port Based On Ann, Ge Zhang

World Maritime University Dissertations

No abstract provided.

Nevada Risk Assessment/Management Program (Nramp) – Phase 2: Quarterly Progress Report April 1, 2007 Through June 30, 2007, Klaus J. Stetzenbach

Nevada Risk Assessment/Management Program

Work conducted this quarter consisted of continuing the detailed data and information acquisition; review of the received document contents, and interpretation of significance in light of previous DOE documents. Much of the effort was devoted to reconciling inconsistencies and contradictions in both the primary data bases and in and among the DOE published documents. These review and reconciliation efforts included regular telephone and e-mail correspondence, as well as in-person discussions with DOE NVO personnel at the April DOE Generator Conference in Las Vegas. Reconciliation efforts continued with frequent (daily) exchanges on the inventory data sets, and the engineering descriptions of …