Engineering Commons^™

Anodic Electrocatalysis Of Glycerol Oxidation For Hybrid Alkali/Acid Electrolytic Hydrogen Generation, Xin Feng, Bo-Wen Liu, Ke-Xin Guo, Lin-Feng Fan, Gen-Xiang Wang, Su-Qin Ci, Zhen-Hai Wen

Journal of Electrochemistry

Electrolytic hydrogen production is heavily restricted by high-energy consumption majorly due to the relatively high potential of anodic oxygen evolution reaction (OER). Development of OER-alternative reaction at the anode has been recently proposed as a promising pathway to address the associated issues. In this work, we report a hybrid acid/alkali dual-electrolyte electrolyzer by coupling acidic hydrogen evolution reaction (HER) using commercial Pt/C cathode with alkaline Electrocatalytic glycerol oxidation (GOR) which is implemented by developing a nickel foam (NF) supporting Co₃O₄ nanosheets anode that shows low overpotential and high selectivity toward GOR for formate production. The hybrid acid/alkali …

Hemodynamic Investigations In Intracranial Aneurysms: A Commentary, Hang Yi, Mark Johnson, Luke Bramlage, Zifeng Yang, Bryan Ludwig

Mechanical and Materials Engineering Faculty Publications

Intracranial aneurysms (IAs) are abnormal bulges in a blood vessel in the brain that have a potential to rupture and even causing a stroke, which can lead to lasting brain damage, long-term disability, or even loss of life. It has been widely acknowledged that hemodynamic factors, e.g., instantaneous wall shear stress, time-averaged wall shear stress, wall shear stress gradient, gradient oscillatory number, oscillatory shear index, pulsatile blood flow waveform (flow rate magnitude and shape, physical flow period), relative residence time/turnover time, blood pressure, and vortex (i.e., size, location, and numbers), have a close relationship with the pathobiology (i.e., initiation, growth, …

Influence Of Processed Natural Black Sand Vs. Natural White Sand And Silica Flour As Additives To Oil-Well Cementing Applications, Ramy Abuel Maaty

Theses and Dissertations

Cementing is a crucial and fundamental step in the process of drilling wells to extract oil from its reservoirs. Cementing main functions are to achieve zonal isolation and provide mechanical support to the casing. Impermeable and powerful cement is strongly desired to withstand high pressures and temperatures during the lifetime of the producing wells. Various additives to cement, such as silica flour, fly ash, Nano-additives and other advanced materials have been used and tested to attain improved cement of higher quality and enhanced properties such as permeability, porosity, mechanical and rheological properties. Very few researches have discussed the uses of …

Surface Characterization Of Particulate Dust Subjected To Dew-Induced Cementation, Mohamed Adawi

Student Theses and Dissertations

Accumulation of soils and other particulate matter on the front cover glass of solar photovoltaic (PV) modules results in transmission losses that detrimentally affect the power output of PV installations. Cementation reactions occur due to interactions between the dust and the glass surface in the presence of temperature, humidity, and ph. In this study, accelerated soiling and cementation tests on glass coupons were performed using a custom instrumented soiling chamber and several standardized soils (Arizona Test Dust, Aramco Test Dust, and China Test Dust) to assess soil adhesion and cementation behaviors. Water contact angle (WCA) and X-ray photoelectron spectroscopy (XPS) …

Me-Em Enewsbrief, December 2022, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Electromagnetic Theory And Applications, Nicholas Madamopoulos, George Kliros

Open Educational Resources

This book intends to provide both the fundamentals of Electromagnetics but also some practical applications of the concepts covered. Having taught electromagnetics for several years, the authors feel that many times the field of electromagnetics comes as “old” and often times students do not appreciate the concepts and their importance in everyday applications. The authors intend to accompany the EM concepts with life applications. Hence, students may see the direct impact of the knowledge they acquire through the study of the field of electromagnetics and better appreciate the field.

Preface To Special Issue: Electrocatalysis And Electrosynthesis, Fang-Yi Cheng, Shuang-Yin Wang, Tian-Hua Zhou

Journal of Electrochemistry

No abstract provided.

Recent Advances In Exploring Highly Active & Durable Pgm-Free Oxygen Reduction Catalysts, Yuan Li, Miao-Ying Chen, Bang-An Lu, Jia-Nan Zhang

Journal of Electrochemistry

In order to reduce the considerable usage of expensive but scarce platinum at the cathode in proton exchange membrane fuel cells (PEMFCs), it is necessary to pursue alternatives to platinum. The most promising platinum group metal (PGM)-free catalysts for oxygen reduction reaction (ORR) are atomically dispersed, and nitrogen-coordinated metal site catalysts denoted as M-N-C (M = Fe, Co, or Mn, etc.). Over the last few decades, there have been great advances in these catalysts with high ORR activity and promising initial fuel cell performance approaching traditional Pt/C catalysts. However, the stability of these highly active Fe-N-C catalysts under practical fuel …

Electrochemical Oxidation Of Ethylene On Palladium Electrode, Wei-Xing Wu, Ying Wang

Journal of Electrochemistry

The electrochemical oxidation of C₂H₄ is attracting increasing attention due to its vast potential market. The current electrochemical methods rely on the use of redox mediators, which may produce corrosive intermediates, while direct oxidation is still limited by its low activity and selectivity. Herein, we conducted electrochemical studies to obtain mechanistic insights into the benchmark Pd catalyst. The generated Pd(II) could be the active site for C₂H₄ oxidation. By designing the pulse sequence, we found the ratio of strongly and weakly adsorbed C₂H₄ on Pd to be 0.3:1. The result we …

Supperlattice-Like Structure: Ordered Mass Transfer Endowing High Quality Output Of Fuel Cell, Jian Wang, Wen-Hui Xuan, Qian He, Jing-Xia Jiang, Yuan-Yuan Zhou, Yao Nie, Qiang Liao, Min-Hua Shao, Wei Ding, Zi-Dong Wei

Journal of Electrochemistry

The current or voltage fluctuation in fuel cell operation is harmful to the fuel cell system and power application equipment. Here, we report a technique to eliminate such a fluctuation by the aid of new type of catalysts, superlattice-like mesoporous PtCo catalysts. The current fluctuation in fuel cells catalyzed by two invented catalysts are fixed at as low as 25 mA·cm⁻² with a power of 0.75 W·cm⁻² or 120 mA·cm⁻² with a power of 1.01 W·cm⁻², and no noticeable current decay was detected over 100 h. By contrast, a …

First-Principles Molecular Dynamics Study Of Liquid Iron-Rich Alloys Under Conditions Of The Earth’S Core, Dipendra Banjara

LSU Doctoral Dissertations

In this dissertation, we report the results of the first-principles molecular dynamics (FPMD) simulations and data analysis on the thermodynamic, structural, and transport properties of iron-rich metallic liquids considering several light and heavy elements under wide ranges of pressure and temperature that are relevant to the earth’s core. Our simulations of pure liquid iron cover the pressure range from 0 GPa at 2000 K to 380 GPa at 7000 K perhaps representing the most extensive computational study to date. We studied four molten iron-rich alloys corresponding to 2.67 atom% of Ni, Co, Mo, and W at pressures up to 380 …

Neutralization Of Fuel Tankering Emissions For Environmental Sustainability, Peter O'Reilly, Maria Petrescu, Fabricio Sulzbacher, Diogo Coutinho

National Training Aircraft Symposium (NTAS)

As aviation has been one of the fastest-growing sources of emissions, this paper explores sustainable solutions in the equation of the economic savings from the fuel tankering practice, in a way it could represent gains of credibility for this industry (Boussauw & Vanoutrive, 2019). The fuel expenses in Brazil have been responsible for the highest operational cost for the airlines and, as a result, there has been an ongoing pursuit of the highest level of efficiency (ANAC, 2019). In this context, this study has been focused on the emerging Brazilian aviation market, and uses primary data collected from three major …

Interfaces In Dynamic Brittle Fracture Of Pmma: A Peridynamic Analysis, Longzhen Wang, Javad Mehrmashhadi, Florin Bobaru

Department of Mechanical and Materials Engineering: Faculty Publications

Recent experiments in bonded PMMA layers have shown dramatic changes in dynamic crack growth characteristics depending on the interface location and toughness. In this paper we present a peridynamic (PD) analysis of this phenomenon and determine three elements that are essential in a model reproducing the observed fracture behavior: (1) softening near the crack tip to account for changes in PMMA due to heat-generation induced by the high strain rates reached around the crack tip in dynamic fracture; (2) independent extension (mode I) and shear (mode II) modes of fracture; (3) a two-parameter fracture model, which matches both strength and …

Effect Of Blank Moisture Content On Forming Behaviour And Mechanical Properties Of Paperboard Tray Packages, Arvo Niini, Lena Berthold, Tobias Müller, Panu Tanninen, Jens-Peter Majschak, Juha Varis, Ville Leminen

Journal of Applied Packaging Research

Tray blanks were moisturised to study the effect of different blank moisture content levels on forming behaviour and mechanical properties of paperboard tray packages. The blank moisturisation was done by spraying water to the blanks before their three-dimensional (3D) forming. The trays were 3D formed by press forming or deep drawing. Visual quality and punch force values were used as indicators to evaluate the forming behaviour of the trays. The mechanical properties of the trays were investigated with compression, torsion, and storing tests. A high blank moisture content reduced the punch force, and the elevated blank moisture was connected to …

Freespan Analysis For Subsea Pipeline Integrity Management Strategy, Nurul Hadi, Muhammad Helmi, Edo Cathaputra, Dedi Priadi, Donanta Dhaneswara

Journal of Materials Exploration and Findings

Abstract. Over a rough seabed or on seabed subject to scour, freespans can occur when contact between a subsea pipeline and the seabed is lost over an acceptable distance. When this exceeds the allowable freespan length, design stresses can be exceeded, and a vortex induced vibration (VIV) response can be initiated, resulting in the risk of fatigue failure. If this is not predicted and controlled properly, it will affect pipeline integrity, leading to expensive rectification and intervention work. Freespan analysis consisted primarily of a screening check in which the as-found freespans from Remotely Operated Vehicle (ROV) or multibeam Side …

Locally Resonant Metasurface For Low-Frequency Transmissive Underwater Acoustic Waves, Zhong Chen, Shenghong Guan, Qiang Xie, Zheng Li, Zhongmei Gao, Mehrdad Negahban

Department of Mechanical and Materials Engineering: Faculty Publications

Introduction: Acoustic metasurfaces for underwater wave manipulation have great potential use, but the strong solid-fluid interaction caused by impedance closeness between the structure and water brings design difficulty, especially in the low-frequency range.

Methods: Here a locally resonant metasurface for transmissive underwater acoustic waves is proposed using finite element method for which each metasurface unit consists of one channel and three subunits. Each subunit has one plate and two rubber spacers to form a resonator. By changing the height ratio of the plate over the subunit, arbitrary phase shifts within the full 2π coverage can be obtained at …

Rc Baja Suspension And Steering, Garrett Bailey

All Undergraduate Projects

The RC Baja team set out to engineer and construct a working remote-control device that can compete in the ASME Baja Competition. The students have a focus on either suspension and steering or drivetrain and chassis. This report is centered on the suspension and steering. First, multiple analyses were completed using engineering methods such as mechanical design, statics, strengths of materials, and dynamics for parts of the device. The calculations found in the analysis are then used to create designs for the parts so that they will meet the requirements and be successful in the competition. After the parts are …

Survey Data: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony Robinson Dr.

Datasets

A survey was conducted to determine the preferred set point temperature and heating pattern among Irish households. The survey was sent to 237 people living across Ireland, out of which 32 respondents skipped the survey and 9 surveys were found to be incomplete. Amongst the counties in Ireland 71.1% respondents were from Dublin, 6.34% from Kildare, 5% from Meath, 5% from Wicklow and in all the remaining counties response rate was below 2%. Part 1: This section of the survey recorded information regarding characteristics of the building such as house type, wall type, insulation type, period the house was built. …

Internal Structure And Breakage Behavior Of Biogenic Carbonate Sand Grains, Elieh Mohtashami, C. Guney Olgun, Chenglin Wu, Tara Selly

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Investigates the Mechanical Behavior of Biogenic Carbonate Sands from Puerto Rico at Grain-Scale Level. Micro-Computed Tomography Has Also Been Used to Get Insights on the Internal Structure of These Particles Before and after Loading. the Crushing Strength of These Particles Are Smaller Comparing to the Values Reported for Silica Sands. It Has Also Been Shown that These Particles Have Complex Internal Structure Including a Network of Pores Connected with Channels. This Study Also Demonstrates the Effect of Intragrain Structure of Biogenic Carbonate Sands and Shows How Internal Grain Structure Plays a Role on Particle Fracture.

Direct Ink Write Processing Of Signal Crossovers Using Aerosol Jet Printing Method, Lucas A. Clark

Browse all Theses and Dissertations

Electronics in different applications, such as in medical imaging devices, radar systems, communication transmitters, and optical drives, often require various power and signal lines to be integrated at board level. In such cases, different lines may cross over one another in three-dimensional space for efficient electronic integration. Crossovers are usually achieved by adding additional layers to a PCB. However, these additional layers increase the cost, weight, and complexity of the component. By creating a process and structure to offer board-level heterogenous integration, these factors may be reduced. RF-DC crossovers were designed and additively manufactured using an aerosol jet printer. Benzocyclobutene …

An Efficient And Low-Cost Method To Create High-Density Nitrogen-Vacancy Centers In Cvd Diamond For Sensing Applications., Prem Bahadur Karki, Rupak Timalsina, Mohammadjavad Dowran, Ayodimeji E. Aregbesola, Abdelghani Laraoui, Kapildeb Ambal

Department of Mechanical and Materials Engineering: Faculty Publications

The negatively charged Nitrogen-Vacancy (NV^-) center in diamond is one of the most versatile and robust quantum sensors suitable for quantum technologies, including magnetic field and temperature sensors. For precision sensing applications, densely packed NV^- centers within a small volume are preferable due to benefiting from 1/√𝑁 sensitivity enhancement (N is the number of sensing NV centers) and efficient excitation of NV centers. However, methods for quickly and efficiently forming high concentrations of NV^- centers are in development stage. We report an efficient, low-cost method for creating high-density NV^- centers production from a relatively …

Correction: Nanoscale Imaging Of Antiferromagnetic Domains In Epitaxial Films Of Cr2o3 Via Scanning Diamond Magnetic Probe Microscopy, Adam Erickson, Syed Qamar Abbas Shah, Ather Mahmood, Ilja Fescenko, Rupak Timalsina, Christian H. Binek, Abdelghani Laraoui

Department of Mechanical and Materials Engineering: Faculty Publications

Correction for ‘Nanoscale imaging of antiferromagnetic domains in epitaxial films of Cr2O3 via scanning diamond magnetic probe microscopy’ by Adam Erickson et al., RSC Adv., 2023, 13, 178–185, https:// doi.org/10.1039/D2RA06440E

Traversing With Quantitative Fidelity Through The Glass Transition Of Amorphous Polymers: Modeling The Thermodynamic Dilatational Flow Of Polycarbonate, Mehrdad Negahban, Wenlong Li, Jean-Marc Saiter, Laurent Delbreilh, Kyle Strabala, Zheng Li

Department of Mechanical and Materials Engineering: Faculty Publications

We follow the assumption that the dilatational response of glassy polymers can be characterized by a back-stress type analog that includes a thermal expansion for each elastic component, and with a viscosity that is dependent on the expansion of the elastic back stress component. To this, we add the assumption of an unloaded equilibrium temperature that correlates to the past processing through the viscous flow. After setting this in a thermodynamically consistent structure, the elastic, elastic backstress, thermal expansion, back-stress thermal expansion, heat capacity and viscous damping are evaluated using existing experiments for the response of polycarbonate over the glassy …

Pinch Force Generation During Scaling By Dental Professionals: A Systematic Review, Jessica R. Suedbeck, Emily A. Ludwig

Dental Hygiene Faculty Publications

Objective

The objective of this review was to examine the impact of instrument designs on pinch force generation during scaling by dental professionals.

Methods

Three databases were utilized from September 2019 to November 2021 in addition to hand-searching specific journals and reference lists. Research articles that examined pinch force generation in dental professionals during scaling with manual instruments only were included. Bias was assessed in the individual articles.

Results

Six research articles were included with sample populations that varied from 12 to 24 participants. Four articles evaluated instrument designs in relation to pinch force generation during scaling by dental professionals. …

Processing And Characterization Of Inkjet Printed Batio3/Su-8 Nanocomposite Dielectrics, Mustapha A. Muhammad

Browse all Theses and Dissertations

The persistent demand for flexible and wearable electronic components in healthcare, aerospace, media, and transit applications has led to a significant shift from traditional electronics processes to printed electronics. Printed electronics are anticipated to establish itself as the industry's dominant force due to their enhanced flexibility, rapid prototyping capabilities, and seamless integration with everyday objects. They are cost-effective and have the scalable option for large-scale production because additive manufacturing techniques are used. Among the various printing methods available, inkjet printing has recently gained popularity for printing electronics, especially capacitors that require precise and complex structures on different substrates. Inkjet printing …

Peridynamic Simulation Of Elastic Wave Propagation By Applying The Boundary Conditions With The Surface Node Method, Francesco Scabbia, Mirco Zaccariotto, Ugo Galvanetto, Florin Bobaru

Department of Mechanical and Materials Engineering: Faculty Publications

Peridynamics is a novel nonlocal theory able to deal with discontinuities, such as crack initiation and propagation. Near the boundaries, due to the incomplete nonlocal region, the peridynamic surface effect is present, and its reduction relies on using a very small horizon, which ends up being expensive computationally. Furthermore, the imposition of nonlocal boundary conditions in a local way is often required. The surface node method has been proposed to solve both the aforementioned issues, providing enhanced accuracy near the boundaries of the body. This method has been verified in the cases of quasi-static elastic problems and diffusion problems evolving …

Effect Of Platelet Length And Stochastic Morphology On Flexural Behavior Of Prepreg Platelet Molded Composites, Siavash Sattar, Benjamin Beltran Laredo, Sergii G. Kravchenko, Oleksandr G. Kravchenko

Mechanical & Aerospace Engineering Faculty Publications

Prepreg platelet molding compound (PPMC) can be used to create structural grade material with a heterogeneous mesoscale morphology. The present work considered various platelet lengths of the prepreg system IM7/8552 to study the effect of platelet length on the flexural behavior of PPMC composite. A progressive failure finite-element analysis was used to understand competing failure modes in PPMC with the different platelet length. The interlaminar and in-plane damage mechanisms were employed to describe complex failure modes within the mesostructure of PPMCs. Experimental results of the flexural tests of the PPMC with different platelet length sizes were used to validate the …

การศึกษาการตรวจหาเชื้อวัณโรคจากภาพย้อมสีทนกรดโดยใช้การเรียนรู้เชิงลึกด้วยเทคนิคการจำแนกและการตรวจจับวัตถุ, ธีริศรา มิคาระเศรษฐ์

Chulalongkorn University Theses and Dissertations (Chula ETD)

การศึกษานี้เป็นการวิเคราะห์ Deep Learning สำหรับตรวจหาเชื้อวัณโรคด้วยวิธีการ Modified Classification และ Object Detection โดยใช้ Pre-Trained Model คือ Enhanced ResNet50 และ AlexNet ในการวิเคราะห์ ซึ่งวิธี Modified Classification มีการนำ Image Processing มาประยุกต์ใช้กับการทดลอง เมื่อ Training ข้อมูล พบว่า ResNet50 เป็น Model ที่มีประสิทธิภาพสูงสุดได้ค่า Accuracy เท่ากับ 92.71% และ Precision เท่ากับ 92.7% เมื่อจัดกลุ่มใหม่สำหรับการวิเคราะห์ แบบ Suspected Positive Low Confidence และ Suspected Positive High Confidence ผลการทดลองพบว่า ResNet50 ยังคงมีประสิทธิภาพที่ดีที่สุด มีค่า Accuracy เท่ากับ 98.06% ค่า Precision เท่ากับ 98.59% ส่วน Suspected Positive High Confidence มีค่า Accuracy เท่ากับ 94.38% และค่า Precision เท่ากับ 91.41% และในการวิเคราะห์ Deep Learning วิธี Object Detection ได้ค่า Precision เท่ากับ 82.81% และ Mean AP เท่ากับ 36.79% จากการเปรียบเทียบการวิเคราะห์ทั้ง 2 Models พบว่า วิธีวิเคาระห์แบบ Modified Classification ได้ผลลัพทธ์ดีกว่า จึงนำไปตรวจร่วมกับวิธีการตรวจของแพทย์ (Doctor …

Advanced Modeling And Innovative Transcranial Magnetic Stimulation Coil Designs For The Treatment Of Neurological Disorders, Mohannad Tashli

Theses and Dissertations

Transcranial magnetic stimulation (TMS) is a safe, effective and non-invasive treatment for several mental and psychiatric disorders. TMS is an FDA approved treatment and is commonly applied to patients who do not respond to medications for the treatment of clinical depression, smoking cessation, obsessive-compulsive disorder and migraine. Recently, there has been an increase in the development of electromagnetic neuromodulation techniques targeted at enhancing the effectiveness of TMS devices for the treatment of mental diseases. In TMS stimulation, focality is an important factor which determines the specificity of the pulses induced in different brain tissues. The electromagnetic pulses must be confined …

การออกแบบแกนดามกระดูกต้นขาชนิดยาวที่เหมาะสำหรับคนไทย ด้วยหลักการออกแบบหารูปร่างที่เหมาะสมที่สุด, ดวงกมล สายะบุตร

Chulalongkorn University Theses and Dissertations (Chula ETD)

การรักษากระดูกต้นขาหักมักใช้วิธีผ่าตัดใส่แกนดามกระดูก โดยแกนดามกระดูกที่ใช้ในปัจจุบันถูกออกแบบโดยอิงจากกายวิภาคของชาวคอเคเชียน ซึ่งไม่เหมาะสมสำหรับประชากรชาวเอเชียเนื่องจากความโค้งของโพรงกระดูกไม่เหมาะสมกัน ซึ่งอาจนำไปสู่การทะลุของปลายแกนดามกระดูกได้ งานวิจัยนี้จะนำวิธีการทำ shape optimiztion มาใช้ในการออกแบบแกนดามกระดูกต้นขาชนิดยาวให้เหมาะสมกับกระดูกต้นขาคนไทย โดยจะเลือกกลุ่มตัวอย่างกระดูกต้นขา 10 กระดูกจากกลุ่มประชากรกระดูกต้นขาคนไทย 60 กระดูก โดยเลือกให้ครอบคลุมกลุ่มประชากรกระดูกต้นขาที่มีรูปร่างหลากหลาย โดยใช้วิธีการจัดกลุ่มแบบ k-means clustering แกนดามกระดูกจะถูกทำการ optimize ในกระดูกกลุ่มตัวอย่างทั้ง 10 กระดูกพร้อม ๆ กัน โดยความเค้นที่เกิดในกระดูกทุกชิ้น จะถูกใช้ในการปรับรูปร่างของแกนดามกระดูกดีไซน์ถัดไป ทำวนไปเรื่อย ๆ จนสามารถลดความเค้นในกระดูกทุกชิ้นได้ แกนดามกระดูกที่ออกแบบใหม่นี้ สามารถทำให้ความเค้นที่เกิดขึ้นในกระดูกต้นขาต่ำลงอย่างมีนัยสำคัญ เมื่อเทียบกับแกนดามกระดูกต้นขาในท้องตลาดที่มีรัศมีความโค้ง 1275, 1500, และ 2000 มิลลิเมตร โดยลดลงเฉลี่ย 96.82%, 98.31%, และ 99.15% ตามลำดับ นอกจากนี้ยังทำการทดสอบความแข็งแรงด้วยวิธีไฟไนต์เอลิเมนต์ พบว่าแกนดามกระดูกที่ออกแบบใหม่มีความแข็งแรง สามารถพัฒนาต่อยอดเพื่อไปใช้ในผู้ป่วยจริงได้ในอนาคต