Engineering Commons^™

Comparison Of Turbine Engine Test Cell Airborne Nanoparticle Count Versus Ambient Background Particle Count, Ryne Larowe

Purdue Polytechnic Directed Projects

With the establishment of the National Test Facility for Aerospace Fuels and Propulsion at Purdue University in October of 2009, new equipment has been acquired to measure and classify exhaust emissions. This facility utilizes the Honeywell F109 turbofan and Pratt & Whitney PT-6 turboprop engine test cells to analyze the emissions and engine operation of new alternative aviation fuels. This observational study investigates what, if any difference there is in the amount of ambient residual Particulate Matter (PM) in the turbofan engine test cell when compared to ambient particle count associated with the Purdue University Airport (KLAF) property. The project …

Blair Balden, Margaret Von Steinen

International Faculty Researchers

A visiting professorship at the University of Passau in Passau, Germany for Dr. Blair Balden, a WMU associate professor of aviation, provided an excellent opportunity to share ideas and information about teaching aviation law with professors from Germany and Austria.

Comparison Of A High Purity Germanium Gamma Ray Spectrometer And A Multidimensional Nai(T1) Scintillation Gamma Ray Spectrometer, Greg Stratton

Aerospace Engineering

This report compares two different gamma ray spectrometers in terms of performance, operation, and apparatus and also investigates the design and integration challenges of using gamma ray spectrometers in space. The first spectrometer is a one-dimensional high purity germanium (HPGe) spectrometer and the second is a multidimensional NaI(Tl) scintillation spectrometer (MGRS). The key results show that the HPGe exhibits 15 to 27 times better energy resolution than the MGRS, but the MGRS is 52 times more sensitive and removes 177 % more of the background radiation.

3d Cfd On An Open Wheel Race Car Front Wing In Ground Effects, Thomas A. Price

Aerospace Engineering

The purpose of the report is to investigate the ability of the Fluent 6.3 k-ε Realizable turbulence model with standard wall functions to model the flow around the front wing of Cal Poly’s 2008 Formula SAE car. The three primary areas of interest are ground effects, the wing wheel interaction, and the wing tip vortices. Fluent was successful at modeling the increase suction from the ground effects, and the upwash due to the wing tip vortices. The results also displayed how the high pressure region in front of the tire propagates forward and interacts with the pressure distribution around the …

A Study On Facility Planning Using Discrete Event Simulation: Case Study Of A Grain Delivery Terminal, Sarah M. Asio

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The application of traditional approaches to the design of efficient facilities can be tedious and time consuming when uncertainty and a number of constraints exist. Queuing models and mathematical programming techniques are not able to capture the complex interaction between resources, the environment and space constraints for dynamic stochastic processes. In the following study discrete event simulation is applied to the facility planning process for a grain delivery terminal. The discrete event simulation approach has been applied to studies such as capacity planning and facility layout for a gasoline station and evaluating the resource requirements for a manufacturing facility. To …

Modeling And Control For Heave Dynamics Of A Flexible Wing Micro Aerial Vehicle Distributed Parameter System, Lisa M. Kuhn

Doctoral Dissertations

In recent years, much research has been motivated by the idea of biologically-inspired flight. It is a conjecture of the United States Air Force that incorporating characteristics of biological flight into air vehicles will significantly improve the maneuverability and performance of modern aircraft. Although there are studies which involve the aerodynamics, structural dynamics, modeling, and control of flexible wing micro aerial vehicles (MAVs), issues of control and vehicular modeling as a whole are largely unexplored. Modeling with such dynamics lends itself to systems of partial differential equations (PDEs) with nonlinearities, and limited control theory is available for such systems.

In …

Astro Camp Presentation, Get Away Special Team 2011

Education and Outreach

No abstract provided.

Boundary Layer Measurements Related To Wind Tunnel Testing Of Riblets, Emrah Cinar

Mechanical & Aerospace Engineering Theses & Dissertations

With fuel economy being a significant factor in today's world of aviation, aircraft manufacturers have been looking into ways to decrease drag to save fuel. Drag reduction using riblets on wing and fuselage surfaces is . an area that has been studied extensively for the last two decades. In preparation for a larger project which will use several methods to simulate this phenomena, small scale research had to be done to find ways to generate similar conditions on scaled models in a low speed wind tunnel and examine boundary layer behavior.

In this project, boundary layer measurement techniques, such as …

A Taskable Space Vehicle: Realizing Cost Savings By Combining Orbital And Suborbital Flight, Thomas Co, Jonathan T. Black

Faculty Publications

The use of space gives the United States distinct advantages in any battlefield environment, but the high cost of space operations increasingly jeopardizes those advantages. Although the United States pioneered much of the current space technology, declining budgets for space research, development, and operations leave our legacy systems vulnerable to adversaries around the world. Other nations formerly incapable of space exploitation are quickly learning to counter US space technologies at surprisingly low costs. In order to reduce the expense of deploying and maintaining a robust space capability, the Department of Defense (DOD) must change the status quo in space operations …

Precision Position, Navigation, And Timing Without The Global Positioning System, Kenneth A. Fisher, John F. Raquet

Faculty Publications

The NAVSTAR Global Positioning System GPS has revolutionized modern warfare. Since 2005 almost all US precision-guided munitions have used GPS targeting data. Consequently, weapons delivery systems are able to strike enemy targets with precision, often resulting in little or no collateral damage. Furthermore, nearly all military assets, including aircraft, tanks, ships, missiles, mortar rounds, cargo boxes, and dismounted Soldiers rely on the accurate position determination that GPS provides. For military users of this system, two main limitations emerge. First, the system relies on line of sight that is, the satellites must be in view of the receiver s antenna so …

X-Hale: Designing The Atmospheric Surveillance Platforms Of The Future, Christopher M. Shearer

Faculty Publications

Imagine the benefits that battlefield commanders or intelligence analysts could derive from an airborne surveillance platform that would carry a 500-pound payload, operate above the range of small arms fire, remain on station for weeks or even years, cost much less than a satellite, and relocate around the globe to a new region of interest within a couple of weeks. Realizing this concept, known as a high-altitude, long-endurance HALE aircraft, is a 10-to-15-year goal of researchers at the Air Force Institute of Technology AFIT. In order to reach this goal, those researchers are following a developmental path similar to the …

Aerospike Rockets For Increased Space Launch Capability, Carl R. Hartsfield, Richard D. Branam, Joshua N. Hall, Joseph R. Simmons Iii

Faculty Publications

The US Department of Defense (DOD) increasingly depends on space assets for everyday operations. Precision navigation; communications; and intelligence, surveillance, and reconnaissance satellites are highly leveraged space assets. The launch vehicles that place these satellites in orbit are a major limitation of current space systems. If higher-performing launch vehicles were available, many satellites could accommodate additional capabilities, whether in terms of more sensor channels, types of payloads, electrical power, or propellant for orbital maneuvering and station keeping.

A Methodology To Repair Or Deorbit Leo Satellite Constellations, Goksel Gurgenburan

Mechanical & Aerospace Engineering Theses & Dissertations

In this thesis, mitigation of space debris is addressed by examining an approach for repair or de-orbit of a specific population of non-functional Low Earth Orbit (LEO) satellites. Basic orbital mechanics propagation of the orbits was used as the process for computing a solution to the time and intercept position for the targeted satellites. Optimal orbital maneuvers to reach the target satellites from a pre-established orbit were also considered. In this way minimum ΔV budget, rendezvous time and mass budgets were managed. The Clohessy-Wiltshire Equations and two-impulsive rendezvous maneuvers were used to determine the orbital path of a chase satellite …

Acoustic Characterization Of The Nasa Langley 14 X 22 Ft Subsonic Wind Tunnel, James Thomas Crippen

Mechanical & Aerospace Engineering Theses & Dissertations

Aero-acoustic testing is used to identify and characterize acoustic sources of test articles within a flow field. Such testing requires high signal-to-background noise level ratios (5 - 10 dB) and an anechoic test chamber. The NASA Langley 14 x 22 ft Subsonic Wind Tunnel is evaluated with respect to operating noise levels and to architectural acoustic characteristics. Operating noise level measurements include power spectral densities, 1/3 octave plots, and overall sound pressure levels. Architectural acoustic measurements are centered around reverberation analysis. A lumped parameter model, based on a technique applied in architectural acoustics to study noise propagation between connected rooms, …

Analysis And Design Of A Propulsion System Trade Study Tool For A Boeing 376 Series Communications Satellite, Kevin Dunk

Aerospace Engineering

No abstract provided.

A Variable Acceleration Calibration System, Thomas H. Johnson

Mechanical & Aerospace Engineering Theses & Dissertations

A variable acceleration calibration system that applies loads using gravitational and centripetal acceleration serves as an alternative, efficient and cost effective method for calibrating internal wind tunnel force balances. Two proof-of-concept variable acceleration calibration systems are designed, fabricated and tested. The NASA UT-36 force balance served as the test balance for the calibration experiments. The variable acceleration calibration systems are shown to be capable of performing three component calibration experiments with an approximate applied load error on the order of 1% of the full scale calibration loads. Sources of error are indentified using experimental design methods and a propagation of …

A Wind Tunnel Technique For The Identification Of Ship Airwake/Rotor Downwash Coupling, Stargel R. Doane

Mechanical & Aerospace Engineering Theses & Dissertations

A wind tunnel study is performed to analyze the interaction between ship airwakes and helicopter rotor downwash. This interaction is of interest to naval aviators and researchers as this phenomenon is thought to limit helicopter flight envelopes and increase the overall difficulty of maritime rotorcraft operations. In this study, a 1/50th scale simplified naval frigate model and appropriately scaled rotor model are used for all experimental work. A rotor thrust survey was conducted in the immediate vicinity of the landing deck. Two dimensional and stereo particle image velocimetry surveys and rotor thrust measurements with various rotor and ship configurations were …

Interface Circuit For A Multiple-Beam Tuning-Fork Gyroscope With High Quality Factors, Ren Wang

Mechanical & Aerospace Engineering Theses & Dissertations

This research work presents the design, theoretical analysis, fabrication, interface electronics, and experimental results of a Silicon-On-Insulator (SOI) based Multiple-Beam Tuning-Fork Gyroscope (MB-TFG). Based on a numerical model of Thermo-Elastic Damping (TED), a Multiple-Beam Tuning-Fork Structure (MB-TFS) is designed with high Quality factors (Qs) in its two operation modes. A comprehensive theoretical analysis of the MB-TFG design is conducted to relate the design parameters to its operation parameters and further performance parameters. In conjunction with a mask that defines the device through trenches to alleviate severe fabrication effect on anchor loss, a simple one-mask fabrication process is employed to implement …

The Tracking Performance Of Distributed Recoverable Flight Control Systems Subject To High Intensity Radiated Fields, Rui Wang

Electrical & Computer Engineering Theses & Dissertations

It is known that high intensity radiated fields (HIRF) can produce upsets in digital electronics, and thereby degrade the performance of digital flight control systems. Such upsets, either from natural or man-made sources, can change data values on digital buses and memory and affect CPU instruction execution. HIRF environments are also known to trigger common-mode faults, affecting nearly-simultaneously multiple fault containment regions, and hence reducing the benefits of n-modular redundancy and other fault-tolerant computing techniques. Thus, it is important to develop models which describe the integration of the embedded digital system, where the control law is implemented, as well …

Photogrammetric Measurement Of Recession Rates Of Low Temperature Ablators Subjected To High Speed Flow, David W. Callaway

Theses and Dissertations

This research advances a technique to simulate high temperature/high speed effects in a high speed/low temperature environment and to capture recession of the test article in three-dimensions. A method of fabricating dry ice test articles was developed, and the AFIT Mach 3 pressure-vacuum wind tunnel was used in combination with the dry ice test articles to collect three-dimensional ablation data for models of different shapes at stagnation pressures ranging from approximately 0.4 atm to 3 atm and stagnation temperatures equivalent to room temperature. High speed Schlieren photography was used for visualization, and the three dimensional shape change was quantified with …

Solar Warning Architecture For Manned Missions To Mars, James S. Bohren, John K. Howard

Theses and Dissertations

Solar radiation storms represent a dire threat to manned interplanetary space travel. Earth's current solar forecasting architecture is Earth-focused and insufficient to provide timely warnings to a manned mission to Mars, therefore a "best value" solar warning architecture must be identified. A total of 14 solar warning architectures were developed by varying 5 solar sensor locations, 2 processing locations, and 2 communications strategies. Using Satellite Tool Kit, performance of the candidate architectures in terms of Warning Time and Solar Coverage was quantified during a Mars mission scenario based on NASA's Design Reference Architecture 5.0. Cost of each candidate architecture was …

Spacecraft Demand Tasking And Skip Entry Responsive Maneuvers, Robert A. Bettinger

Theses and Dissertations

The purpose of this research was to parametrically investigate the viability of skip entry maneuvers as an alternative to vacuum-only maneuvers, and to identify whether skip entry maneuvers can extend spacecraft mission lifetime by limiting propellant expenditure through the exploitation of the aerodynamic interaction between the upper atmosphere and an example entry vehicle and remote-sensing orbital platform. Employing the X-37B Orbital Test Vehicle (OTV) and a notional satellite design as the example entry vehicles, the entry profile dynamics of a skip entry maneuver were characterized with varying trajectory initial conditions such as entry altitude, entry flight-path angle, and vehicle aerodynamics. …

A Relay-Rover Differential Game, Youngdong Choi

Theses and Dissertations

Guidance laws are developed to optimally position a relay Micro-UAV (MAV) to provide an operator at the base with real-time Intelligence, Surveillance, and Reconnaissance (ISR) by relaying communication and video signals when the rover MAV performing the ISR mission is out of radio contact range with the base. The ISR system is comprised of two MAVs, the Relay and the Rover, and a Base. The Relay strives to minimize the radio frequency (RF) power required for maintaining communications, while the Rover performs the ISR mission, which may maximize the required RF power. The optimal control of the Relay MAV entails …

Study Of Varying Boundary Layer Height On Turret Flow Structures, Renato Jelic

Theses and Dissertations

The Air Force Institute of Technology and the Air Force Research Labs are investigating flows over turrets which are commonly encountered in directed energy integrations with air vehicles. In this work, the computational study was performed using the NASA developed time-marching finite volume code OVERFLOW 2.2 to analyze the effect of boundary layer height on symmetrical and non-symmetrical turret geometries. The effects of aerodynamics yield to the aberration of the laser beam through two methods, aero-optical and aero-mechanical jitter. The analysis of the flow features, pressure fluctuations, density fluctuations, and forces and moments on the various geometries was conducted to …

Simulations For The Test Flight Of An Experimental Hale Aircraft, Brooke E. Kaszynski

Theses and Dissertations

Recent events, such as the crash of NASA's Helios aircraft during a test flight, show that more must be known about the nonlinear control of HALE aircraft. Shearer, Cesnik and their co-workers have developed a code that is a practical solution to the coupled nonlinear aeroelasticity and flight dynamics of very flexible aircraft called the University of Michigan's Nonlinear Aeroelastic Simulation Toolbox (UM/NAST). They are also in the process of developing a model HALE aircraft called X-HALE which will be used to validate this code experimentally. This research performs flight simulations with UM/NAST so as to make predictions about X-HALE's …

Process For Refining And Validating A Finite Element Model Of An Experimental High-Altitude, Long-Endurance (Hale) Aircraft, Nicholas A. Sinnokrak

Theses and Dissertations

The work presented here focuses on finite element (FE) modeling of X-HALE, a test aircraft designed and built by the University of Michigan, in conjunction with the Air Force Institute of Technology (AFIT) and Air Force Research Laboratory (AFRL). This scaled vehicle is representative of high-altitude, long-endurance (HALE) aircraft and was designed to provide controlled aeroelastic and flight data. FE models of portions of the X-HALE wing structure were created and analysis results were compared against two separate laboratory static bending tests conducted on X-HALE wing sections. The process documented here should improve future efforts to refine FE models of …

Optical Flow-Based Odometry For Underground Tunnel Exploration, Terra Kier

Theses and Dissertations

As military operations in degraded or GPS-denied environments continue to increase in frequency and importance, there is an increased necessity to be able to determine precision location within these environments. Furthermore, authorities are finding a record number of tunnels along the U.S.-Mexico border; therefore, underground tunnel characterization is becoming a high priority for U.S. Homeland Security as well. This thesis investigates the performance of a new image registration technique based on a two camera optical- flow configuration using phase correlation techniques. These techniques differ from other image based navigation methods but present a viable alternative increasing autonomy and answering the …

Design And Characterization Of A Space Based Chromotomographic Hyperspectral Imaging Experiment, Jason D. Niederhauser

Theses and Dissertations

This research focuses upon the design, analysis and characterization of several systems related to a spacebased chromotomographic experiment (CTEx), a hyperspectral imager, currently in development at the Air Force Institute of Technology. Three interrelated subject-areas were developed. The initial focal point was a generic, system-level mechanical layout and integration analysis of the space-based instrument. The scope of this work was intended to baseline the space-based system design in order to allow for further trade-space refinement and requirements development. Second, development of an iteration upon the ground-based version of CTEx was accomplished in an effort to support higher-fidelity field data-collection. This …

Operational Characteristics Of A Rotating Detonation Engine Using Hydrogen And Air, Rachel M. Russo

Theses and Dissertations

Rotating detonation engines (RDE) are pressure gain combustion engines that have the potential for greater efficiency than traditional, constant pressure, deflagration engines. RDEs are smaller and mechanically simpler than pulsed detonation engines. A small diameter (3 in) engine was successfully run on hydrogen and air. Most of the tests were conducted using air with a slightly lower diluents percentage (77% nitrogen as opposed to 79% nitrogen). These tests provided the foundation for determining the operational space (mass flow rate and equivalence ratio) of the rotating detonation engine. From the tests conducted with the lower diluents air, the appropriate run conditions …

Effect Of Molecular Film Thickness On Thermal Conduction Across Solid-Film Interfaces, Zhi Liang, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The Brownian Motion and Aggregation of Particles in Nanofluids Often Lead to the Formation of Solid-Film-Solid Structures. the Molecular Thin Film Confined between Nanoparticles May Have Non-Negligible Effects on Thermal Conduction among Nanoparticles. using Nonequilibrium Molecular Dynamics Simulations, We Study Thermal Conduction Across the Ag Particle-Ar Thin-Film Interface. If the Film Contains Only One Molecular Layer, We Find that the Solid-Film Interfacial Thermal Resistance RSF is About 1 Order of Magnitude Smaller Than the Solid-Liquid (Bulk) Interfacial Thermal Resistance RSL. If There Are Two or More Molecular Layers in the Film, It is Shown that RSF Increases Rapidly toward RSL …