Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Aerospace Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 7111 - 7140 of 11124

Full-Text Articles in Engineering

Proof Of Concept For Propeller Performance Testing In The Cal Poly Wind Tunnel, Alex N. May, Clayton R. Green, Clinton J. Kirsop, Jason A. Schupp Jun 2013

Proof Of Concept For Propeller Performance Testing In The Cal Poly Wind Tunnel, Alex N. May, Clayton R. Green, Clinton J. Kirsop, Jason A. Schupp

Aerospace Engineering

The goal of this experiment was to execute a proof of concept for a potential propulsion systems laboratory. During the course of this experiment, a data acquisition system was designed, built, and tested in order to collect data from the Cal Poly 3x4 ft draw-down wind tunnel. By operating a brushless outrunner motor and propeller on the sting mount, data was collected for thrust, torque, RPM, current, voltage, and tunnel velocity. By obtaining data for each of these performance metrics, trends were analyzed to confirm the concept and apparatus was functional. The results of the experiment revealed that the concept …

Go to article

Nozzle Design For The Supersonic Wind Tunnel Ramjet Attachment, Andrew Michael Carter Jun 2013

Nozzle Design For The Supersonic Wind Tunnel Ramjet Attachment, Andrew Michael Carter

Aerospace Engineering

This document outlines the concept, design, and manufacturing stages of the nozzle section to the Ramjet Attachment. This project is a subsidiary of the thesis, Baseline Performance of Ramjet Engine”, developed by Harrison Sykes. The nozzle geometry is based off of theoretical calculations using Isentropic and Rayleigh line flow relations for a two-dimensional cross section. The nozzle sees an inlet temperature of 953 degrees Fahrenheit, pressure of 28 psi, and a Mach number of 0.356 after the combustion chamber. The nozzle section is a two foot long converging diverging nozzle to choke and accelerate the flow to achieve an exit …

Go to article

Redesigned Aerospace Control System Platform For Laboratory Re-Purposing, Ryan W. Moskaluk Jun 2013

Redesigned Aerospace Control System Platform For Laboratory Re-Purposing, Ryan W. Moskaluk

Aerospace Engineering

This senior project encompasses using an aircraft model in conjunction with the 3' by 4' low speed wind tunnel at Cal Poly San Luis Obispo. The aircraft model is controlled through piezoelectric actuators embedded inside the flexible tail structure via a PID controller. The objective for this project is to demonstrate the effect of tuning the individual PID controller gains with the aircraft model inside the low speed wind tunnel and to create an easy to use graphical user interface for doing so.

Go to article

Coupled Flow Field Simulations Of Charring Ablators With Nonequilibrium Surface Chemistry, Hicham Alkandry, Iain D. Boyd, Alexandre Martin Jun 2013

Coupled Flow Field Simulations Of Charring Ablators With Nonequilibrium Surface Chemistry, Hicham Alkandry, Iain D. Boyd, Alexandre Martin

Mechanical Engineering Faculty Publications

This paper describes the coupling of a Navier-Stokes solver to a material response code to simulate nonequilibrium gas-surface interactions. The Navier-Stokes solver used in this study is LeMANS, which is a three-dimensional computational fluid dynamics code that can simulate hypersonic reacting flows including thermo-chemical nonequilibrium effects. The material response code employed in this study is MOPAR, which uses the one-dimensional control volume nite-element method to model heat conduction and pyrolysis gas behavior. This coupling is demonstrated using a test case based on the Stardust sample return capsule. Coupled simulations are performed at three different trajectory conditions. The effects of the …

Go to article

A New Approach To Light-Weight Ablators Analysis: From Micro-Tomography Measurements To Statistical Analysis And Modeling, Nagi N. Mansour, Francesco Panerai, Alexandre Martin, Dilworth Y. Parkinson, Alastair A. Macdowell, Abdelmoula Haboub, Timothy A. Sandstrom, Tony Fast, Gerard L. Vignoles, Jean Lachaud Jun 2013

A New Approach To Light-Weight Ablators Analysis: From Micro-Tomography Measurements To Statistical Analysis And Modeling, Nagi N. Mansour, Francesco Panerai, Alexandre Martin, Dilworth Y. Parkinson, Alastair A. Macdowell, Abdelmoula Haboub, Timothy A. Sandstrom, Tony Fast, Gerard L. Vignoles, Jean Lachaud

Mechanical Engineering Faculty Publications

The morphology characteristics and ablation behavior of a highly porous carbon fiber preform are studied using a combined experimental/numerical approach. Morphological characterization of the three-dimensional structure of the material is performed by hard X-rays synchrotron micro-tomography at the Advanced Light Source of Lawrence Berkeley National Laboratory. The resulting micro-tomography voxels are used to compute geometrical properties of the carbon preform, like porosity, specific surface area and tortuosity, that are otherwise indirectly measured through experimental techniques. The reconstructed volumes are used to build a computational grid for numerical simulations of the fibers' ablation. By modeling the diffusion of oxygen through the …

Go to article

Volume Averaged Modeling Of The Oxidation Of Porous Carbon Fiber Material, Alexandre Martin Jun 2013

Volume Averaged Modeling Of The Oxidation Of Porous Carbon Fiber Material, Alexandre Martin

Mechanical Engineering Faculty Publications

Charring ablators remain the premium choice for space exploration missions that involve atmospheric re-entry. This type of ablative material is composed of a carbon matrix, usually made of fibers, which is then impregnated with a resin. During re-entry, the high heat flux produced by convective heating causes the material to chemically react. First, the resin pyrolyzes, and is vaporized into a gas that travels through the material, and is eventually ejected at the surface. Then, as the temperature rises, the surface of the porous matrix recess through ablative processes. For re-entry conditions typical of space exploration missions, this is mainly …

Go to article

Flow-Tube Oxidation Experiments On The Carbon Preform Of Pica, Francesco Panerai, Alexandre Martin, Nagi N. Mansour, Steven A. Sepka, Jean Lachaud Jun 2013

Flow-Tube Oxidation Experiments On The Carbon Preform Of Pica, Francesco Panerai, Alexandre Martin, Nagi N. Mansour, Steven A. Sepka, Jean Lachaud

Mechanical Engineering Faculty Publications

Oxidation experiments on the carbon preform of a phenolic-impregnated carbon ablator were performed in the NASA Ames ow-tube reactor facility, at temperatures between 700 and 1300 K, under dry air gas at pressures between 103 and 104 Pa. Mass loss, volumetric recession and density changes were measured at different test conditions. An analysis of the diffusion/reaction competition within the porous material, based on the Thiele number, allowed us to identify low temperature and low pressure conditions to be dominated by in-depth volume oxidation. Experiments above 1000 K were found at transition conditions, where diffusion and reaction occur at similar scales. …

Go to article

Multi-Dimensional Modeling Pyrolysis Gas Flow Inside Charring Ablators, Haoyue Weng, Alexandre Martin Jun 2013

Multi-Dimensional Modeling Pyrolysis Gas Flow Inside Charring Ablators, Haoyue Weng, Alexandre Martin

Mechanical Engineering Faculty Publications

Using an ablative thermal/material response code, the importance of three-dimensionality for modeling ablative test-article is addressed. In particular, the simulation of the pyrolysis gas flow inside a porous material is presented, using two different geometries. The effects of allowing the gas to flow out of the side wall are especially highlighted. Results show that the flow inside the test-article is complex, and that the 0D or 1D assumption made in most Material Response (MR) codes might not be valid for certain geometries.

Go to article

Incorporating Aluminum Honeycomb To Increase Efficiency Of U-Tube Removable Heat Exchanger, Daniel Soto, Daniel Corona Jun 2013

Incorporating Aluminum Honeycomb To Increase Efficiency Of U-Tube Removable Heat Exchanger, Daniel Soto, Daniel Corona

Aerospace Engineering

This report contains the results of attempting to improve on the results of Scott R. Sawyer and Alan M. L’Esperance research paper “Investigation of Paraffin Wax as an Energy Storage Medium Within a Shell-and-Tube Heat Exchanger.” The overall goal of the paper mentioned was to investigate the usefulness of wax as an energy storage medium. Scott R. Sawyer and Alan M. L’Esperance determined that “the amount of energy that can be released by the paraffin wax back to the airflow reaches a plateau, despite an increase in heating times.” They suggested that by surrounding the airflow tubes of a heat …

Go to article

Paschen Breakdown In A Co2 Atmosphere, Matthew T. Stumbo Jun 2013

Paschen Breakdown In A Co2 Atmosphere, Matthew T. Stumbo

Aerospace Engineering

This report observes and analyzes the effect the pressure and gap distance have on the minimum positive breakdown potential between two parallel plate copper electrodes in both air and CO2. Two gap distances, 0.57 cm and 2.44 cm, were used. Paschen Curves generated in air from these distances had a strong positive correlation with a Spearman correlation coefficient of 0.97. Curves generated in CO2 had a Spearman correlation coefficient of 0.87. The strong correlation for both gases verifies Paschen's Law. The minimum breakdown potential in air was 361 ± 2 V at a pressure x gap distance …

Go to article

Synergistic Effects Of Atomic Oxygen And Ultraviolet Radiation Exposure On Various Spacecraft Materials, Adrian L. Doan Jun 2013

Synergistic Effects Of Atomic Oxygen And Ultraviolet Radiation Exposure On Various Spacecraft Materials, Adrian L. Doan

Aerospace Engineering

The Aerospace Engineering Space Environments Laboratory at California Polytechnic State University features a ground-based system capable of generating atomic oxygen (AO) and vacuum ultraviolet (VUV) radiation environments, constructed by Max Glicklin in 2012. Experiments using three different spacecraft materials were conducted to test the individual and synergistic effects of these naturally occurring phenomena. Kapton HN functioned as a means to provide initial validation of the presence of AO and VUV radiation. Kapton HN also functioned as a test-fluence standard during testing of two other materials. These materials included aluminized beta cloth, with the non-aluminized side being tested, and Indium-Tin-Oxide (ITO) …

Go to article

Thermal Vacuum Chamber Operation And Testing, Leila Tebyani Jun 2013

Thermal Vacuum Chamber Operation And Testing, Leila Tebyani

Aerospace Engineering

The purpose of this senior project is to understand the capabilities of the thermal vacuum chamber in the Space Environments Laboratory at California Polytechnic State University and compare the performance to thermal vacuum chambers used in the aerospace industry. The lowest temperature attained inside the chamber during an experiment at ambient pressure was -33°C. The lowest pressure reached by the vacuum chamber at the time of this project was 5e-5 Torr. This report also yields recommendations for integrating a demonstation of the effects of thermal variation in space on spacecraft components for the class AERO 471. A lit LED can …

Go to article

Development Of Random Vibration Profiles For Test Deployers To Simulate The Dynamic Environment In The Poly-Picosatellite Orbital Deployer, Steve Furger Jun 2013

Development Of Random Vibration Profiles For Test Deployers To Simulate The Dynamic Environment In The Poly-Picosatellite Orbital Deployer, Steve Furger

Aerospace Engineering

TestPODs and P-PODs have different structures with different resonant frequencies. This causes a change in the frequency response for CubeSats integrated into TestPODs compared to P-PODs. Adjusted random vibration profiles were developed for TestPODs to simulate the dynamic environment of the P-POD so CubeSats would have a consistent response in both deployers. Testing has shown that, with proper characterization of TestPODs and P-PODs, adjusted profiles can be used for TestPODs to simulate the P-POD dynamic environment.

Go to article

Fin Flutter Analysis, Richard Bauer, Austin Hardman Jun 2013

Fin Flutter Analysis, Richard Bauer, Austin Hardman

Aerospace Engineering

This report summarizes the experimental process executed to study fin flutter characteristics. The experiment analyzed the influence of the relationship between structural dynamics and aerodynamics on flutter characteristics. Theoretical models were created in PATRAN/NASTRAN and FinSim for comparison to experimental results and to set the envelope of the physical experiments. The theoretical analysis predicted the occurrence of flutter near Mach 1 or Mach 5. The physical model was constructed of solid aluminum with machined holes for the inertial sensors. Two test runs were completed to collect data on the displacement of the fin in the supersonic wind tunnel. Additionally, the …

Go to article

Creation And Analysis Of An Electric And Magnetic Model Of A Micro Ion Thruster, Maxwell Bodnar Jun 2013

Creation And Analysis Of An Electric And Magnetic Model Of A Micro Ion Thruster, Maxwell Bodnar

Aerospace Engineering

This report explores the magnetic and electric fields within the Cal Poly Miniature Xenon Ion (MiXI) Thruster V3 in order to create a comprehensive electric and magnetic model of the plasma chamber to analyze and test the current thruster configurations and changes to the existing thruster. This model is used to analyze the operation and efficiency of the ion thruster and the plasma environment within the plasma chamber. This model explores the ionization and electron collision rates during operation of the thruster to measure the efficiency of the current thruster configuration, also determining the theoretical Isp and thrust of the …

Go to article

Study Of Natural Composite Materials Square Beam Under Three Point Bending Test, Casey Wu Jun 2013

Study Of Natural Composite Materials Square Beam Under Three Point Bending Test, Casey Wu

Aerospace Engineering

The purpose of this report is to summarize the findings on three point bending tests to try to find the optimum geometrical shape and layup configuration of a square beam composed of natural composites. The final project was entered into the SAMPE 2013 bridge building competition to compete internationally against other universities in the natural square beam category. The main focus of the bridge project is to compose it entirely of natural occurring fibers and other natural materials to create a “green” beam. The beams in the competition are tested under 3 point bending tests and will be scored based …

Go to article

Construction And Testing Of A Quadcopter, David Roberts Jun 2013

Construction And Testing Of A Quadcopter, David Roberts

Aerospace Engineering

No abstract provided.

Go to article

Assessment For Completion Of Cp7 Integration With Revision 6 Avionics, Daniel Jennings Jun 2013

Assessment For Completion Of Cp7 Integration With Revision 6 Avionics, Daniel Jennings

Electrical Engineering

he purpose of this project is the continuation of the CP7 CubeSat project, analysis for integration with new Avionics Systems, and to leave behind instruction for future work for completion of the satellite. CP7 is a satellite in development to support a mechanical and electrical system to experiment on particle damping in micro-gravity. The completion of this satellite needs to be prioritized more than it has been by the PolySat team to honor our work with Northrop Grumman, who have been supportive and helpful throughout the process. This work seeks to aid in the completion of this satellite, so that …

Go to article

Integrated Collision Avoidance System Sensor Evaluation Final Design Project, Alex F. Graebe, Bridgette S. Kimball, Drew T. Lavoise Jun 2013

Integrated Collision Avoidance System Sensor Evaluation Final Design Project, Alex F. Graebe, Bridgette S. Kimball, Drew T. Lavoise

Mechanical Engineering

Following the development of Aircraft Collision Avoidance Technology (ACAT) by the National Aeronautics and Space Administration (NASA), a need arose to transition the life-saving technology to aid the general aviation community. Considering the realistic cost of implementation, it was decided that the technology should be adapted to function on any smartphone, using that device as an end-to-end solution to sense, process, and alert the pilot to imminent threats. In September of 2012, the SAS (Sense and Survive) Senior Project Team at California Polytechnic University (Cal Poly), San Luis Obispo was assigned the task of using smartphone technology to accurately sense …

Go to article

A Generic Decision Making Framework For Autonomous Systems, Connor Lange Jun 2013

A Generic Decision Making Framework For Autonomous Systems, Connor Lange

Master's Theses

With the rising popularity of small satellites, such as CubeSats, many smaller institutions previously incapable of developing and deploying a spacecraft have starting to do so. Institutions with a history of space flight, such as NASA JPL, have begun to put projects on CubeSats that would normally fly on much larger satellites. As a result, the institutions with space flight heritage have begun to port spacecraft software that was previously designed for much larger and more complex satellites to the CubeSat platform. Unfortunately for universities, who are the majority of all institutions devel- oping CubeSats, these ported systems are too …

Go to article

Feasibility Of Microsatellite Active Debris Removal Systems, Karsten J. James Jun 2013

Feasibility Of Microsatellite Active Debris Removal Systems, Karsten J. James

Master's Theses

Space debris has become an increasingly hazardous obstacle to continued spaceflight operations. In an effort to mitigate this problem an investigation of the feasibility of a microsatellite active debris removal system was conducted. Through proposing a novel concept of operation, utilizing a grapple-and-tug system architecture, and by analyzing each resultant mission phase in the frame of a representative example, it was found that microsatellite scale systems are capable of fulfilling the active debris removal mission. Analysis of rendezvous, docking, control and deorbit mission requirements determined that the design of a grapple-and-tug system will be driven by sizing of the propellant …

Go to article

Linear Model Estimation Of Nonlinear Systems Using Least-Squares Algorithm5, Alireza Rahrooh, Walter W. Buchanan, Remzi Seker Jun 2013

Linear Model Estimation Of Nonlinear Systems Using Least-Squares Algorithm5, Alireza Rahrooh, Walter W. Buchanan, Remzi Seker

Publications

This paper presents utilizes Least-Squares Algorithm to obtain more accurate linear models of nonlinear systems using parameter estimation. This approach generates an optimal linear model which is valid over a wide range of trajectories and converges to the desired steady-state value with no errors unlike the existing techniques. The proposed technique is very efficient and does not require storing the data. Therefore, it can easily be used and implemented with limited resources for undergraduate curriculum especially in underdeveloped countries. Most available techniques for linearization of nonlinear system are only valid about the operating point; furthermore, the knowledge of the operating …

Go to article

Rocket Fuel Pressurization, Sean Green, Joe Marcinkowski, Andrew Nahab Jun 2013

Rocket Fuel Pressurization, Sean Green, Joe Marcinkowski, Andrew Nahab

Mechanical Engineering

No abstract provided.

Go to article

Global Skin Friction Diagnostics: The Glof Technique And Measurements Of Complex Separated Flows, Sudesh A. Woodiga Jun 2013

Global Skin Friction Diagnostics: The Glof Technique And Measurements Of Complex Separated Flows, Sudesh A. Woodiga

Dissertations

This work describes the application of the global luminescent oil film skin friction meter to quantitative global skin friction diagnostics of complex separated flows. The development of this technique is based on the relationship between the oil film thickness and luminescent intensity of a luminescent oil film. The projected thin oil film equation is given to relate the normalized luminescent intensity with skin friction. The variational formulation with a smoothness constraint on skin friction is proposed to obtain a snap shot solution from two consecutive images for a relative skin friction field. A complete skin friction field is reconstructed through …

Go to article

Design And Analysis Of Reusable Nozzles For Cal Poly’S Hybrid Rocket Lab, Cheyne Austin, Jose Vargas Jun 2013

Design And Analysis Of Reusable Nozzles For Cal Poly’S Hybrid Rocket Lab, Cheyne Austin, Jose Vargas

Aerospace Engineering

Two nozzles were designed and constructed for testing in the Cal Poly propulsion laboratory to explore which nozzle was the most capable in producing the most thrust. A 15 degree and 30 degree converging-diverging nozzles were machined and tested. Theory suggest that a bell nozzle would be the most efficient since all of the gasses generated in the combustion chamber are directed and accelerated by the throat leave the nozzle traveling along the thrust axis. All of the momentum of the gasses are directed axially thus resulting in maximum thrust. Thrust should also be produced by the converging-diverging nozzle and …

Go to article

Low-Cost Imu Implementation Via Sensor Fusion Algorithms In The Arduino Environment, Brandon Mccarron Jun 2013

Low-Cost Imu Implementation Via Sensor Fusion Algorithms In The Arduino Environment, Brandon Mccarron

Aerospace Engineering

A multi-phase experiment was conducted at Cal Poly in San Luis Obispo, CA, to design a low-cost inertial measurement unit composed of a 3-axis accelerometer and 3-axis gyroscope. Utilizing the growing microprocessor software environment, a 3-axis accelerometer and 3-axis gyroscope simulated 6 degrees of freedom orientation sensing through sensor fusion. By analyzing a simple complimentary filter and a more complex Kalman filter, the outputs of each sensor were combined and took advantage of the benefits of both sensors to improved results. Gyroscopic drift was removed in the pitch and roll axes using the Kalman filter for both static and dynamic …

Go to article

Micrometeoroid Fluence Variation In Critical Orbits Due To Asteroid Disruption, Eliot Dan Aretskin-Hariton Jun 2013

Micrometeoroid Fluence Variation In Critical Orbits Due To Asteroid Disruption, Eliot Dan Aretskin-Hariton

Master's Theses

Micrometeoroids and orbital debris (MMOD) is a growing issue with international importance. Micrometeoroids are naturally occurring fragments of rock and dusk that exist throughout the solar system. Orbital debris is human made material like rocket bodies, paint flakes, and the effluent of spacecraft collisions. Even small MMOD particles on the order of 1 cm in diameter have the potential to destroy critical spacecraft systems. Because of this, MMOD is a threat to all spacecraft in orbit. Even governments that most sternly oppose US international policy have a stake when it comes to minimizing MMOD flux. Space-based assets are essential to …

Go to article

Design, Fabrication, And Testing Of An Emr Based Orbital Debris Impact Testing Platform, Jeffrey J. Maniglia Jr. Jun 2013

Design, Fabrication, And Testing Of An Emr Based Orbital Debris Impact Testing Platform, Jeffrey J. Maniglia Jr.

Master's Theses

This paper describes the changes made from Cal Poly’s initial railgun system, the Mk. 1 railgun, to the Mk. 1.1 system, as well as the design, fabrication, and testing of a newer and larger Mk. 2 railgun system. The Mk. 1.1 system is developed as a more efficient alteration of the original Mk. 1 system, but is found to be defective due to hardware deficiencies and failure, as well as unforeseen efficiency losses. A Mk. 2 system is developed and built around donated hardware from the Naval Postgraduate School. The Mk. 2 system strove to implement an efficient, augmented, electromagnetic …

Go to article

Improvement Of Electromagnetic Railgun Barrel Performance And Lifetime By Method Of Interfaces And Augmented Projectiles, Aleksey D. Pavlov Jun 2013

Improvement Of Electromagnetic Railgun Barrel Performance And Lifetime By Method Of Interfaces And Augmented Projectiles, Aleksey D. Pavlov

Master's Theses

Several methods of increasing railgun barrel performance and lifetime are investigated. These include two different barrel-projectile interface coatings: a solid graphite coating and a liquid eutectic indium-gallium alloy coating. These coatings are characterized and their usability in a railgun application is evaluated. A new type of projectile, in which the electrical conductivity varies as a function of position in order to condition current flow, is proposed and simulated with FEA software. The graphite coating was found to measurably reduce the forces of friction inside the bore but was so thin that it did not improve contact. The added contact resistance …

Go to article

Characterization Of The Effects Of A Sun-Synchronous Orbit Slot Architecture On The Earth's Orbital Debris Environment, Connor David Noyes Jun 2013

Characterization Of The Effects Of A Sun-Synchronous Orbit Slot Architecture On The Earth's Orbital Debris Environment, Connor David Noyes

Master's Theses

Low Earth orbit represents a valuable limited natural resource. Of particular interest are sun-synchronous orbits; it is estimated that approximately 44% of low Earth satellites are sun-synchronous. A previously developed sun-synchronous orbit slot architecture is considered. An in-depth analysis of the relative motion between satellites and their corresponding slots is performed. The long-term evolution of Earth's orbital environment is modeled by a set of coupled ordinary differential equations. A metric for quantifying the benefit, if any, of implementing a sun-synchronous architecture is developed. The results indicate that the proposed slot architecture would reduce the frequency of collisions between satellites in …

Go to article

First Prev Next Last