Engineering Commons^™

Brakes, Thrust Reversers, Beta Props, Spoilers And Life Dumps All Help In Deceleration Of Jets And Turboprops, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Automotive-Inspired Inceptors And Control Laws Designed For Simplified Piloted Flight, Kashif Ali

Doctoral Dissertations and Master's Theses

This thesis details the development of a simulator-based experiment in automotive- inspired controls for aircraft. The goal is to fuse the ease of drivability of a car with the flight of an aircraft. A standard automotive control hardware setup coupled with fly-by-wire control laws will allow non-pilots to fly a plane using their familiarity with driving a car. A mathematical description of the control law logic and controller implementation is presented and the human subjects' performance is measured from data collected during experimental testing of the simulator. Preliminary results indicate that non-pilots improve their path-tracking performance and reduce control activity …

Study Of Surface Tension, Natural Evaporation, And Subcooled Boiling Evaporation Of Aqueous Surfactant Solutions, Matthew John Lehman

Doctoral Dissertations and Master's Theses

The relation between surface tension and surfactant concentration and its effect on solution evaporation under natural convection and subcooled pool boiling is examined through experimental methods. Aqueous solutions of sodium lauryl sulfate (SLS), ECOSURFTM EH-14, and ECOSURFTM SA-9 are used in this study. SLS is an anionic surfactant while EH-14 and SA-9 are environmentally-friendly nonionic surfactants.

Surfactants, surface active agents, are known to affect evaporation performance of solutions and are studied in relation to water loss prevention and heat dissipation. Surfactants could be useful under drought conditions which present challenges to water management on a yearly basis in arid areas …

A Computer Program For The Coupled Implementation Of Meanline And Throughflow Methods To Simplify The Aerodynamic Design Of Multistage Axial Compressors, Alexander V. Rozendaal

Doctoral Dissertations and Master's Theses

A computer program capable of simplifying the preliminary aerodynamic design process of multistage axial compressors has been developed. This interactive design tool, named C-STAAC, combines the Meanline and Throughflow analysis capabilities of two independent compressor design codes to form one standalone system. The program greatly improves the efficiency of the Preliminary-to-Throughflow stages of compressor design by providing fully coupled interaction between the two platforms. The result enables the user to produce stacked airfoil geometry from only a handful of initial input parameters.

The program additionally offers a wide selection of pre- and post-processing capabilities that were not previously available with …

Characterising The Loading Direction Sensitivity Of 3d Woven Composites: Effect Of Z-Binder Architecture, Mohamed Nasr Saleh, Arief Yudhanto, Prasad Potluri, Gilles Lubineau, Constantinos Soutis

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Three different architectures of 3D carbon fiber woven composites (orthogonal, ORT; layer-to-layer, LTL; angle interlock, AI) were tested in quasi-static uniaxial tension. Mechanical tests (tensile in on-axis of warp and weft directions as well as 45° off-axis) were carried out with the aim to study the loading direction sensitivity of these 3D woven composites. The z-binder architecture (the through-thickness reinforcement) has an effect on void content, directional fiber volume fraction, mechanical properties (on-axis and off-axis), failure mechanisms, energy absorption and fiber rotation angle in off-axis tested specimens. Out of all the examined architectures, 3D orthogonal woven composites (ORT) demonstrated a …

Balloon Assisted Sounding Rocket Vehicle Concept Study, Benjamin Thompson, Christopher Helmerich, Jared Fuchs, Matthew Haskell, Tate Harriman

Von Braun Symposium Student Posters

No abstract provided.

Development Of A Thrust Stand For Micro-Electric Propulsion, Chloe Mcfadden, Kurt Polzin

Von Braun Symposium Student Posters

No abstract provided.

Optimization Of A High Power Rocket Vehicle For Autonomous Rover Deployment, Davis Hunter, Francis Wessling

Von Braun Symposium Student Posters

No abstract provided.

Electromagnetic Forcing As A Damping Method For Combustion Instabilities, Bradley Henderson, Gabriel Xu

Von Braun Symposium Student Posters

No abstract provided.

Balloonsat As An Outreach Platform, Nicholas Jordan, Francis Wessling

Von Braun Symposium Student Posters

No abstract provided.

Spacecraft Charging Current Balance Model Applied To High Voltage Solar Array Operations, Emily M. Willis, Maria Z A Pour

Von Braun Symposium Student Posters

No abstract provided.

Overview Of The Terrestrial Rays Analysis And Detection Science Mission, Jared Fuchs

Von Braun Symposium Student Posters

No abstract provided.

Designing An Anti-Coincidence Shielding System For The Alfred Project, Active Luminescence For X-Ray Emission Detection (Alfred) Team, Francis Wessling

Von Braun Symposium Student Posters

No abstract provided.

Multidisciplinary Design Optimization Of Launch Vehicles Using Exergy As An Objective, Andrew Gilbert, Bryan Mesmer

Von Braun Symposium Student Posters

No abstract provided.

Space Systems Overview Of Sse -120 Satellites & Space Systems I, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A  PowerPoint presentation created by Professor Bob Twiggs on "Space Systems Overview of SSE -120 Satellites & Space Systems I" on October 27, 2016.

Launch Vehicles, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs on "Launch Vehicles" from October 27, 2016.

A Bioinspired Modification For Uas Propeller/Rotor Noise Reduction, Mark N. Callender

ASA Multidisciplinary Research Symposium

This projects presents a bioinspired modification to UAS propellers/rotors for noise reduction. Sound pressure levels (SPL) and thrust for modified propellers were compared to a baseline propeller. The bioinspired modification yielded lower SPL with a requisite increase in rpm in order to maintain a chosen level of thrust.

'My Entire Life Has Been Influenced By The Space Industry’ | College Of Engineering, Usu College Of Engineering

College of Engineering News

Published in Creating Tomorrow – Oct. 15, 2016 – Jessica Gregory remembers looking up on her way to elementary school and seeing rockets blaze into the morning skies. She was raised near Santa Maria, Calif., in the 1980s at a time when rocket launches from nearby Vandenberg Air Force Base were a common sight.

Simulation Investigation Of Temperature Distribution In Large Aluminium Panel During Autoclave Age Forming Process, Yongqian Xu

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Multi-Dome Forming Of A Ti–Al–Mn Alloy, Sergey Aksenov, Aleksey Kolesnikov, Ivan Zakhariev

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

3d Fe Modelling Of Die Stress And Wear In Non-Isothermal Forging Of Ti–6al–4v Turbine Blade, Shiyuan Luo, Dahu Zhu, Lin Hua, Dongsheng Qian, Sijie Yan

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Assessment Of High Cycle Fatigue Crack Growth Under Different Stages Based On Crystal Plasticity Modeling, Duoqi Shi, Shiwei Han, Xiaoguang Yang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Emerging Business Models For Commercial Spaceports: Current Trends From The Us Perspective, Janet K. Tinoco, Chunyan Yu

Publications

Agenda for Presentation:

• US Commercial/Government Active Launch Sites
• Why Commercial Spaceports?
• Spaceport Business Model Drivers
• Spaceport Multi-Modal Facility and Infrastructure Requirements
• Emerging Spaceport Business Models
• Summary and Concluding Remarks

Natural Convection And Forced Convection Model Based On Electroneutrality And Migration In Redox Mhd Systems, Fangping Yuan, Kakkattukuzhy M. Isaac

Collaborative Research: Actively Controllable Microfluidics with Film-Confined Redox-Magnetohydrodynamics -- Video and Data

No abstract provided.

Large Linear Magnetoresistance In Heavily-Doped Nb:Srtio3 Epitaxial Thin Films, Hyunwoo Jin, Keundong Lee, Seung-Hyub Baek, Jin-Sang Kim, Byung-Ki Cheong, Bae Ho Park, Sungwon Yoon, B. J. Suh, Changyoung Kim, Sung S. Ambrose Seo, Suyoun Lee

Physics and Astronomy Faculty Publications

Interaction between electrons has long been a focused topic in condensed-matter physics since it has led to the discoveries of astonishing phenomena, for example, high-T_c superconductivity and colossal magnetoresistance (CMR) in strongly-correlated materials. In the study of strongly-correlated perovskite oxides, Nb-doped SrTiO₃ (Nb:SrTiO₃) has been a workhorse not only as a conducting substrate, but also as a host possessing high carrier mobility. In this work, we report the observations of large linear magnetoresistance (LMR) and the metal-to-insulator transition (MIT) induced by magnetic field in heavily-doped Nb:STO (SrNb_0.2Ti_0.8O₃) epitaxial thin …

Pocketqube: The New Opportunity To Get Into Space, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "PocketQube: The New Opportunity to get into Space" from October 3, 2016.

Pocketqube Opportunity Mission, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "PocketQube Opportunity Mission" from October 2, 2016.

Optimizing The Telescope Assembly Alignment Simulator For Sofia, Zoe E. Sharp, Alex Quyenvo, Jennifer Briggs, Brian Eney

STAR Program Research Presentations

The Stratospheric Observatory for Infrared Astronomy (SOFIA) conducts research on a modified Boeing 747sp aircraft. By using a variety of infrared science instruments mounted on a 2.7 meter telescope, researchers can make discoveries about the galactic center, star formation, and various topics associated with a deeper understanding of our universe. To efficiently collect data through the SOFIA instruments, the instruments must be tested and prepared prior to being placed on the aircraft. Therefore, with the use of the Telescope Assembly Alignment Simulator (TAAS), researchers can design and construct improvements needed for these instruments to efficiently perform while in flight. The …

Climb Performance Of Business Jets, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Measurements By Controlled Meteorological Balloons In Coastal Areas Of Antarctica, Lars R. Hole, Alexis Pérez Bello, Tjarda J. Roberts, Paul B. Voss, Timo Vihma

Engineering: Faculty Publications

An experiment applying controlled meteorological (CMET) balloons near the coast of Dronning Maud Land, Antarctica, in January 2013 is described. Two balloons were airborne for 60 and 106 hours with trajectory lengths of 885.8 km and 2367.4 km, respectively. The balloons carried out multiple controlled soundings on the atmospheric pressure, temperature and humidity up to 3.3 km. Wind speed and direction were derived from the balloon drift. Observations were compared with radiosonde sounding profiles from the Halley Research Station, and applied in evaluating simulations carried out with the weather research and forecasting (WRF) mesoscale atmospheric model. The most interesting feature …