Engineering Commons^™

Possible Detection Of Low Energy Solar Neutrons Using Boron Based Materials, Nicole Benker, Elena Echeverria, Robert Olesen, Brant E. Kananen, John W. Mcclory, Yaroslav V. Burak, Volodymyr T. Adamiv, Ihor M. Teslyuk, George Glenn Peterson, Ben Bradley, Ethiyal R. Wilson, James C. Petrosky, Bin Dong, Jeffry Kelber, Jennifer Hamblin, Jaques Doumani, Peter A. Dowben, Alex Enders

Faculty Publications

Solar neutrons have been detected aboard the International Space Station (ISS), using lithium tetraborate and boron carbide detector elements. We find that evidence of a solar neutron flux, as detected in a neutron calorimeter following subtraction of the proton background, with an energy of about 2 to 4 MeV. This solar neutron flux is likely no more than 250 to 375 neutrons cm⁻²sec⁻¹, with a lower bound of 50–75 neutrons cm⁻²sec⁻¹ at one au.

Extension Of A Penalty Method For Numerically Solving Constrained Multibody Dynamic Problems, Troy Newhart

Mechanical & Aerospace Engineering Theses & Dissertations

Numerical analysis of constrained static and multibody dynamic systems has become an integral part of engineering analysis with the continued improvements in technology and software availability. Many methods currently exist for numerically solving constrained static and dynamic systems. The applicability of a penalty method for constrained static solutions is observed in many academic texts and papers. The appeal for using a penalty method in statics pertains to its ease of implementation, computational suitability, and accuracy. This thesis extends a static penalty method for use with constrained multibody dynamics to observe if the penalty method’s benefits are similar for a dynamics …

Dear Neil Armstrong: Letters To The First Man From All Mankind, James R. Hansen

Purdue University Press Book Previews

In the years between the historic first moon landing by Apollo 11 on July 20, 1969, and his death at age 82 on August 25, 2012, Neil Armstrong received hundreds of thousands of cards and letters from all over the world, congratulating him, praising him, requesting pictures and autographs, and asking him what must have seemed to him to be limitless—and occasionally intrusive—questions. Of course, all the famous astronauts received fan mail, but the sheer volume Armstrong had to deal with for more than four decades after his moon landing was staggering.

Today, the preponderance of those letters—some 75,000 of …

Modeling And Testing Powerplant Subsystems Of A Solar Uas, Luke J. Bughman

Master's Theses

In order to accurately conduct the preliminary and detailed design of solar powered Unmanned Aerial Systems (UAS), it is necessary to have a thorough understanding of the systems involved. In particular, it is desirable to have mathematical models and analysis tools describing the energy income and expenditure of the vehicle. Solar energy income models may include available solar irradiance, photovoltaic array power output, and maximum power point tracker efficiency. Energy expenditure models include battery charging and discharging characteristics, propulsion system efficiency, and aerodynamic efficiency. In this thesis, a series of mathematical models were developed that characterize the performance of these …

Design Of The 21-Meter Network Monitor And Control System For Deep Space Network Cross Support, Sarah E. Wilczewski

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science Morehead State University in Partial Fulfillment of the Requirements for the Degree Master of Science by Sarah E. Wilczewski on September 26, 2019.

Experimental And Numerical Analysis Of Quasi-Static Deformation Mechanisms Of Additively Manufactured Lattice Structures, Behzad Bahrami Babamiri

Von Braun Symposium Student Posters

No abstract provided.

Seeded Hydrogen In Nuclear Thermal Propulsion (Ntp) Engines, Daria Nikitaeva

Von Braun Symposium Student Posters

No abstract provided.

Evaluation Of Varying Surface Finishes On Thin-Walled Blown Powdered Deposition Inconel 625, Noah Naden, Giancarlo Puerto, Judy Schneider

Von Braun Symposium Student Posters

No abstract provided.

Characterization Of A Pulse-Recharge Circuit For Puff, Nathan Schilling

Von Braun Symposium Student Posters

No abstract provided.

Design And Development Of An Autonomous Return Vehicle, Sean Widmier, An Nguyen, Colin Oberthur, Sean Mitchell, Fred Snopl

Von Braun Symposium Student Posters

No abstract provided.

A Test-Bed For Measuring Uas Servo Reliability, Abdelrahman Elsaid, Daniel Kwasi Adjekum, John Nordlie, Fatima El Jamiy

Aviation Faculty Publications

Extant literature suggests minimal research on the reliability of Commercial off-the-shelf (COTS) components used in fabricating non-military Unmanned Aerial System (UAS). Stochastic failures of components during operational cycles over time poses a safety hazard to flight operations. The purpose of the study was to critically assess the operational performance standards (reliability) of a laboratory designed UAS component test-bed operated using real-world data collected from a Boeing Scan Eagle^® UAS aileron servo unit via a flight data recorder. The study hypothesized that the test-bed’s reliability, in terms of a measured encoder output of commanded servo positions, will not be significantly …

Aircraft Hydraulic Systems - Fundamentals, Nihad E. Daidzic

Aviation Department Publications

Aircraft hydraulic systems are essential non-propulsive power systems. Hydraulic power systems are used to power major functional aircraft systems, such as flight controls (primary and secondary), friction braking, nose gear steering, thrust-reversers, operating heavy cargo doors, etc.

Wind Tunnel Measurements And Data Analysis Tutorial, Nihad E. Daidzic

Aviation Department Publications

This tutorial gives details on processing of raw aerodynamic data measured directly in the wind tunnel on airfoils and wings. Also procedures and equations from the lab report are given and demonstrated how to compute geometric characteristics of wings/airfoils and air data. All numeric results are typically rounded to five significant digits.

Cubesat Astronomy Mission Modeling Using The Horizon Simulation Framework, Alexander W. Johnson

Master's Theses

The CubeSat Astronomy Network is a proposed system of multiple CubeSat spacecraft capable of performing follow-up observations of astronomical targets of interest. The system is intended to serve as a space-borne platform that can complement existing systems utilized for astronomical research by undergraduate and high school students. Much research and development work has been performed to develop model-based system engineering methodologies and products for CubeSat missions, including the Horizon Simulation Framework. The Horizon Simulation Framework enables the development of system models using the Extended Markup Language (XML), and its simulation program can generate system simulations over model-specified timespans. System requirements …

Hybrid Structural Composites With Energy Harvesting Capabilities, Simon Furnes

Doctoral Dissertations and Master's Theses

Hybrid materials have received significant interest due to the potential enhancements they provide over traditional materials such as sensing, actuating, energy scavenging, thermal management, and vibration damping. While traditional materials can be utilized for either one of these functions or loadbearing, the hybrid materials are superior as they allow combination of a wide array of functionalities whilst being suitable for load-bearing purposes.

The goal of this thesis is to elucidate the synergistic effects of hybridization of two piezoelectric materials; zinc oxide nanowires (ZnO NWs) and thin film of lead zirconium titanate (PZT) on the mechanical and energy harvesting of beams …

Multimode Nonlinear Vibration Analysis Of Stiffened Functionally Graded Double Curved Shells In A Thermal Environment, Boutros Azizi

Doctoral Dissertations and Master's Theses

The motivation of the current work is to develop a multi-modal analysis of the nonlinear response of stiffened double curved shells made of functionally graded materials under thermal loads. The formulation is based on the first order shear deformation shell theory in conjunction with the von Kármán geometrical nonlinear strain-displacement relationships. The nonlinear equations of motion of stiffened double curved shell based on the extended Sanders’s theory were derived using Galerkin’s method. The resulting system of infinite nonlinear ordinary differential equations, that includes both cubic and quadratic nonlinear terms, was solved using a nonlinear dynamic software XPPAUT to obtain the …

Thermal Bending, Buckling And Post-Buckling Analysis Of Unsymmetrically Laminated Composite Beams With The Effects Of Moisture And Geometric Imperfections, Claudia Barreno

Doctoral Dissertations and Master's Theses

This thesis is concerned with the analytical study of the thermal bending, buckling, and post-buckling of unsymmetrically laminated composite beams with imperfection under hygrothermal effects. Three different boundary conditions will be considered on this study. The non-linear governing partial differential equations are derived by taking into account the von-Karman geometrical nonlinearity for an imperfect unsymmetrical laminated composite beam. Classical beam theory (CBT) as well as first order shear deformation theory (FSDT) will be used. The effects of temperature, angle of orientation, moisture variations, imperfection, and geometrical parameters, will be evaluated and discussed. Two different laminated composite laminates will be considered: …

Ion Software-Defined Radio Metadata Standard Final Report, Sanjeev Gunawardena, Alexander Rugamer, Muhammad Subhan Hameed, Markel Arizabaleta, Thomas Pany, Javier Arribas

Faculty Publications

The ION GNSS SDR Metadata Standard describes the formatting and other essential PNT-related parameters of sampled data streams and files. This allows processors to seamlessly consume such data without the need to input these parameters manually. The technical development phase of the initial version of the standard has now been deemed complete and is currently undergoing the last remaining procedural steps towards adoption as a formal standard by the Institute of Navigation. This paper reports on the activities of the working group since September 2018 and summarizes the final products of the standard. It also reports on examples of early …

Investigation Of The Under-Body Flow Field Of A Prototype Long-Range Electric Vehicle, Matthew P. Nguyen

Master's Theses

This thesis presents changes to the design of the Prototype Vehicles Laboratory (PROVE Lab) Endurance Car, an electric car intended to break the Guinness World Record for the single-charge range of an electric vehicle. The design range is 1609.34 km, however at the design velocity of 104.6 kph, the drag is 196 N; which requires more battery capacity than the 100 kWh maximum of the baseline model. With a fixed frontal area, drag reduction can come from lowered velocity or reduced CD. CD reduction is attempted in four ways: side skirts between the fenders, a raised ride height, an elongated …

Effects Of Carbon-Based Ablation Products On Hypersonic Boundary Layer Stability, Olivia S. Elliott

Theses and Dissertations

Hypersonic vehicles require an accurate prediction of the transition of the boundary layer for the design of the thermal protection system due to the high heating rates under turbulent flow. Many thermal protection systems are carbon-based and introduce new species, specifically CO₂, into the boundary layer flow which are known to dampen the instabilities that lead to transition for hypersonic vehicles. A Computation Fluid Dynamics study was accomplished examining the concentration of CO₂ required to impact boundary layer transition over both sharp and blunt cones. These results were used in conjunction with air-carbon ablation models models to …

Experimental Investigation Into Utilizing Synthetic Jet Actuators To Suppress Bi-Modal Wake Behavior Behind An Ahmed Body, Daniel Jacob Baratta

Master's Theses

Testing done on the flat-back Ahmed Body and other bluff bodies has shown the existence of a bi-stable reflectional symmetry-breaking wake at Reynolds numbers ranging from 340 to 2.41 x 10⁶. Several methods of flow control, both active and passive, have been used to improve the efficiency of the Ahmed body but their effect on the bi-stable nature of the wake has not been investigated. This work details the experimental investigation done to determine if piezoelectrically driven synthetic jet actuators are capable of suppressing the bi-stable wake effects observed behind the Ahmed Body. The synthetic jets were designed …

Rare But Conceivable: Determining The Likelihood Of Meteors And Other Infrequent Events, Michael S. Schmidt, Maria Vega-Westhoff

Engineering Management and Systems Engineering Faculty Research & Creative Works

In the aftermath of a rare but devastating disaster, there is a tendency to overestimate how frequent such an event may be, hence a tendency to overestimate the risk associated with such an event. Those concerned with process safety will acknowledge that though rare, events like meteors, hurricanes, and airplane crashes that can impact chemical plants are conceivable. Typically, though, they have nothing more than feelings to decide whether these events are likely enough to be considered "credible." This compiles data from the literature for several "meteors," both natural and man-made, that often become a cause of general concern after …

Reliability-Based Design Optimization Of Load Sharing Systems Using Ssi-Markov Models, Arun Bala Subramaniyan, Rong Pan, Xiaoping Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper presents a novel single loop approach to design the components of the load sharing systems by optimally allocating the failure probabilities to each component, thereby satisfying the overall system reliability requirement. The Reliability–Based Design Optimization (RBDO) of load sharing systems is computationally intensive due to the dynamic nature of component failure probabilities, since the failure of one component will vary the failure probabilities of other working components. Many RBDO methods have been successfully utilized to design individual components, however using these methods for handling system level reliability constraints is still a challenging task. This is because of a …

Development Of A Tailored Flight Test Approach For Small Unmanned Aircraft Systems, Neil A. Wolfe

Master's Theses

This document contains the details of a study conducted to determine an effective performance flight test approach specifically for small Unmanned Aircraft Systems (sUAS). This was done by taking proven procedures and documentation from the FAA and the Air Force for manned aircraft and tailoring them specifically for use with sUAS flight test programs. A ‘sUAS Flight Testing Handbook’ was created from the proceedings to aid commercial organizations and recreational developers conducting sUAS research without access to flight test experience. A performance flight test program was conducted with the AeroVironment RQ-20 Puma sUAS using the developed approach to verify that …

A Comparison Of Crushing Parameters Of Graphite Composite Thin-Walled Cylinders Cured In Low And High Pressures, Trenton John Matson

Master's Theses

Out-of-Autoclave (OoA) processes for manufacturing aerospace-grade parts needs to be better understood to further the development and success of industries that are manufacturing reusable launch vehicles, military and commercial aircraft, and spacecraft. Overcoming the performance limitations associated with OoA, also known as low-pressure prepreg curing, methods (void count, energy absorption, etc.) will help decrease the costs associated with aerospace composite manufacturing and the negative environmental effects correlated with high-pressure composite curing methods. Experimental, theoretical, and numerical approaches are used to explore both low and high-pressure curing cycles and how the two different processes affect final cured parts. Quasi-static uniaxial compression …

A Volume-Force Synthetic Disturbance Approach For High-Fidelity Of Unsteady Fluid Structure Interactions, Marina Kazarina

Doctoral Dissertations and Master's Theses

The purpose of this dissertation is to analyze the momentum source model, for generating synthetic vortical disturbance field in numerical simulations of unsteady fluid-structure interactions, access limitations of this approach, to find requirements for the computational domain, space and time resolution, and apply this model to investigate selected physical problems. For this reason a comprehensive parametric study of volume-force based method of generating spectral synthetic turbulence inside the computational domain is conducted first. The method is then extended to synthesize turbulence with arbitrary energy spectrum. The synthetic turbulence is generated through momentum source terms in Navier-Stokes equations, and the developed …

Improving Boron For Combustion Applications, Kerri-Lee Annique Chintersingh

Dissertations

Boron has received much attention as a potential additive to explosives and propellants due to its high theoretical gravimetric and volumetric heating values. The challenge, however, is that boron particles tend to agglomerate, have lengthy ignition delays and very low combustion rates. Prior research indicates that boron’s long ignition delays are due to its inhibiting naturally occurring oxide layer, impeding the diffusion of reactants for oxidation. For combustion, current studies report that boron particles have two consecutive stages, but the actual reaction mechanism is poorly understood. Despite many years of relevant research, quantitative combustion data on micron-sized boron particles are …

Cislunar Trajectory Generation With Sun-Exclusion Zone Constraints Using A Genetic Algorithm And Direct Method Hybridization, Joshua A. Ostman

Theses and Dissertations

Space missions to the Moon have received renewed interest in recent decades. Science missions continue to be sent to the Moon, and several space agencies have aspirations of establishing a human presence on the Moon. With the increased number of artificial objects in cislunar space, the problem of tracking these objects arises. Optical sensors are able to track these objects in deep space. However, optical sensors cannot track objects that are close to the Sun as viewed from the observer. This unobservable region is the Sun-exclusion zone (SEZ). This research attempts to create optimal Moon-Earth transfers which are completely in …

Research On Double-Stack Container Transport Organization In International Multimodal Transport, Xi Zhu

World Maritime University Dissertations

No abstract provided.

Optimization Of The Dedicated Corridor System Connecting Bohai Rim Gateways, Xinyi Shi

World Maritime University Dissertations

No abstract provided.